Searcharxiv⌕ Search

arXiv subjects

Xiaohu You

Publications and source records attributed to Xiaohu You.

At least 181 records · Page 10Linked to original sources

Joint Neural Network Equalizer and Decoder

Recently, deep learning methods have shown significant improvements in communication systems. In this paper, we study the equalization problem over the nonlinear channel using neural networks. The joint equalizer and decoder based on neural networks are proposed to realize blind equalization and decoding process without the knowledge of channel state information (CSI). Different from previous methods, we use two neural networks instead of one. First, convolutional neural network (CNN) is used to adaptively recover the transmitted signal from channel impairment and nonlinear distortions. Then the deep neural network decoder (NND) decodes the detected signal from CNN equalizer. Under various channel conditions, the experiment results demonstrate that the proposed CNN equalizer achieves better performance than other solutions based on machine learning methods. The proposed model reduces about $2/3$ of the parameters compared to state-of-the-art counterparts. Besides, our model can be easily applied to long sequence with $\mathcal{O}(n)$ complexity.

eess.SP↗

Decentralized Asynchronous Coded Caching in Fog-RAN

In this paper, we investigate asynchronous coded caching in fog radio access networks (F-RAN). To minimize the fronthaul load, the encoding set collapsing rule and encoding set partition method are proposed to establish the relationship between the coded-multicasting contents in asynchronous and synchronous coded caching. Furthermore, a decentralized asynchronous coded caching scheme is proposed, which provides asynchronous and synchronous transmission methods for different delay requirements. The simulation results show that our proposed scheme creates considerable coded-multicasting opportunities in asynchronous request scenarios.

cs.IT↗

Graph-based Cooperative Caching in Fog-RAN

In this paper, the cooperative caching problem in fog radio access networks (F-RAN) is investigated. To maximize the incremental offloaded traffic, we formulate the clustering optimization problem with the consideration of cooperative caching and local content popularity, which falls into the scope of combinatorial programming. % and is NP-hard. We then propose an effective graph-based approach to solve this challenging problem. Firstly, a node graph is constructed with its vertex set representing the considered fog access points (F-APs) and its edge set reflecting the potential cooperations among the F-APs. %whether the F-APs the distance and load difference among the F-APs. Then, by exploiting the adjacency table of each vertex of the node graph, we propose to get the complete subgraphs through indirect searching for the maximal complete subgraphs for the sake of a reduced searching complexity. Furthermore, by using the complete subgraphs so obtained, a weighted graph is constructed. By setting the weights of the vertices of the weighted graph to be the incremental offloaded traffics of their corresponding complete subgraphs, the original clustering optimization problem can be transformed into an equivalent 0-1 integer programming problem. The max-weight independent subset of the vertex set of the weighted graph, which is equivalent to the objective cluster sets, can then be readily obtained by solving the above optimization problem through the greedy algorithm that we propose. Our proposed graph-based approach has an apparently low complexity in comparison with the brute force approach which has an exponential complexity. Simulation results show the remarkable improvements in terms of offloading gain by using our proposed approach.

cs.IT↗

Power-and Rate-Adaptation Improves the Effective Capacity of C-RAN for Nakagami-$m$ Fading Channels

We propose a power-and rate-adaptation scheme for cloud radio access networks (C-RANs), where each radio remote head (RRH) is connected to the baseband unit (BBU) pool through optical links. The RRHs jointly support the users by efficiently exploiting the enhanced spatial degrees of freedom. Our proposed scheme aims for maximizing the effective capacity (EC) of the user subject to both per-RRH average-and peak-power constraints, where the EC is defined as the maximum arrival rate that can be supported by the C-RAN under the statistical delay requirement. We first transform the EC maximization problem into an equivalent convex optimization problem. By using the Lagrange dual decomposition method and solving the Karush-Kuhn-Tucker (KKT) equations, the optimal transmission power of each RRH can be obtained in closed-form. Furthermore, an online tracking method is provided for approximating the average power of each RRH for the sake of updating the Lagrange dual variables. For the special case of two RRHs, the expression of the average power of each RRH can be calculated in explicit form. Hence, the Lagrange dual variables can be computed in advance in this special case. Furthermore, we derive the power allocation for two important extreme cases: 1) no delay constraint; 2) extremely stringent delay-requirements. Our simulation results show that the proposed scheme significantly outperforms the conventional algorithm without considering the delay requirements. Furthermore, when appropriately tuning the value of the delay exponent, our proposed algorithm is capable of guaranteeing a delay outage probability below $10^{-9}$ when the maximum tolerable delay is 1 ms. This is suitable for the future ultra-reliable low latency communications (URLLC).

cs.IT↗

Utility-Energy Efficiency Oriented User Association with Power Control in Heterogeneous Networks

This letter investigates optimizing utility-energy efficiency (UEE), defined as the achieved network utility when consuming a unit of power, rather than a typical energy efficiency metric, in a heterogeneous network (HetNet). To tackle the nonconvexity of the problem due to integer constraints and coupled variables, we devise an alternating optimization algorithm. It applies Lagrangian dual analysis with auxiliary variables, which successfully transforms each subproblem to a convex one with efficient solutions. The proposed algorithm is consequently guaranteed to converge to a local optimum with noticeable performance gain via simulation verifications.

cs.IT↗

Learning Oriented Cross-Entropy Approach to User Association in Load-Balanced HetNet

This letter considers optimizing user association in a heterogeneous network via utility maximization, which is a combinatorial optimization problem due to integer constraints. Different from existing solutions based on convex optimization, we alternatively propose a cross-entropy (CE)-based algorithm inspired by a sampling approach developed in machine learning. Adopting a probabilistic model, we first reformulate the original problem as a CE minimization problem which aims to learn the probability distribution of variables in the optimal association. An efficient solution by stochastic sampling is introduced to solve the learning problem. The integer constraint is directly handled by the proposed algorithm, which is robust to network deployment and algorithm parameter choices. Simulations verify that the proposed CE approach achieves near-optimal performance quite efficiently.

cs.IT↗

A Data-Aided Channel Estimation Scheme for Decoupled Systems in Heterogeneous Networks

Uplink/downlink (UL/DL) decoupling promises more flexible cell association and higher throughput in heterogeneous networks (HetNets), however, it hampers the acquisition of DL channel state information (CSI) in time-division-duplex (TDD) systems due to different base stations (BSs) connected in UL/DL. In this paper, we propose a novel data-aided (DA) channel estimation scheme to address this problem by utilizing decoded UL data to exploit CSI from received UL data signal in decoupled HetNets where a massive multiple-input multiple-output BS and dense small cell BSs are deployed. We analytically estimate BER performance of UL decoded data, which are used to derive an approximated normalized mean square error (NMSE) expression of the DA minimum mean square error (MMSE) estimator. Compared with the conventional least square (LS) and MMSE, it is shown that NMSE performances of all estimators are determined by their signal-to-noise ratio (SNR)-like terms and there is an increment consisting of UL data power, UL data length and BER values in the SNR-like term of DA method, which suggests DA method outperforms the conventional ones in any scenarios. Higher UL data power, longer UL data length and better BER performance lead to more accurate estimated channels with DA method. Numerical results verify that the analytical BER and NMSE results are close to the simulated ones and a remarkable gain in both NMSE and DL rate can be achieved by DA method in multiple scenarios with different modulations.

cs.IT↗

Efficient Soft-Output Gauss-Seidel Data Detector for Massive MIMO Systems

For massive multiple-input multiple-output (MIMO) systems, linear minimum mean-square error (MMSE) detection has been shown to achieve near-optimal performance but suffers from excessively high complexity due to the large-scale matrix inversion. Being matrix inversion free, detection algorithms based on the Gauss-Seidel (GS) method have been proved more efficient than conventional Neumann series expansion (NSE) based ones. In this paper, an efficient GS-based soft-output data detector for massive MIMO and a corresponding VLSI architecture are proposed. To accelerate the convergence of the GS method, a new initial solution is proposed. Several optimizations on the VLSI architecture level are proposed to further reduce the processing latency and area. Our reference implementation results on a Xilinx Virtex-7 XC7VX690T FPGA for a 128 base-station antenna and 8 user massive MIMO system show that our GS-based data detector achieves a throughput of 732 Mb/s with close-to-MMSE error-rate performance. Our implementation results demonstrate that the proposed solution has advantages over existing designs in terms of complexity and efficiency, especially under challenging propagation conditions.

eess.SP↗

Efficient Channel Estimator with Angle-Division Multiple Access

Massive multiple-input multiple-output (M-MIMO) is an enabling technology of 5G wireless communication. The performance of an M-MIMO system is highly dependent on the speed and accuracy of obtaining the channel state information (CSI). The computational complexity of channel estimation for an M-MIMO system can be reduced by making use of the sparsity of the M-MIMO channel. In this paper, we propose the hardware-efficient channel estimator based on angle-division multiple access (ADMA) for the first time. Preamble, uplink (UL) and downlink (DL) training are also implemented. For further hardware-efficiency consideration, optimization regarding quantization and approximation strategies have been discussed. Implementation techniques such as pipelining and systolic processing are also employed for hardware regularity. Numerical results and FPGA implementation have demonstrated the advantages of the proposed channel estimator.

eess.SP↗

Improving Massive MIMO Belief Propagation Detector with Deep Neural Network

In this paper, deep neural network (DNN) is utilized to improve the belief propagation (BP) detection for massive multiple-input multiple-output (MIMO) systems. A neural network architecture suitable for detection task is firstly introduced by unfolding BP algorithms. DNN MIMO detectors are then proposed based on two modified BP detectors, damped BP and max-sum BP. The correction factors in these algorithms are optimized through deep learning techniques, aiming at improved detection performance. Numerical results are presented to demonstrate the performance of the DNN detectors in comparison with various BP modifications. The neural network is trained once and can be used for multiple online detections. The results show that, compared to other state-of-the-art detectors, the DNN detectors can achieve lower bit error rate (BER) with improved robustness against various antenna configurations and channel conditions at the same level of complexity.

eess.SP↗

Efficient Sparse Code Multiple Access Decoder Based on Deterministic Message Passing Algorithm

Being an effective non-orthogonal multiple access (NOMA) technique, sparse code multiple access (SCMA) is promising for future wireless communication. Compared with orthogonal techniques, SCMA enjoys higher overloading tolerance and lower complexity because of its sparsity. In this paper, based on deterministic message passing algorithm (DMPA), algorithmic simplifications such as domain changing and probability approximation are applied for SCMA decoding. Early termination, adaptive decoding, and initial noise reduction are also employed for faster convergence and better performance. Numerical results show that the proposed optimizations benefit both decoding complexity and speed. Furthermore, efficient hardware architectures based on folding and retiming are proposed. VLSI implementation is also given in this paper. Comparison with the state-of-the-art have shown the proposed decoder's advantages in both latency and throughput (multi-Gbps).

cs.IT↗

Directional Modulation: A Secure Solution to 5G and Beyond Mobile Networks

Directional modulation (DM), as an efficient secure transmission way, offers security through its directive property and is suitable for line-of-propagation (LoP) channels such as millimeter wave (mmWave) massive multiple-input multiple-output (MIMO), satellite communication, unmanned aerial vehicle (UAV), and smart transportation. If the direction angle of the desired received is known, the desired channel gain vector is obtainable. Thus, in advance, the DM transmitter knows the values of directional angles of desired user and eavesdropper, or their direction of arrival (DOAs) because the beamforming vector of confidential messages and artificial noise (AN) projection matrix is mainly determined by directional angles of desired user and eavesdropper. For a DM transceiver, working as a receiver, the first step is to measure the DOAs of desired user and eavesdropper. Then, in the second step, using the measured DOAs, the beamforming vector of confidential messages and AN projection matrix is designed. In this paper, we describe the DOA measurement methods, power allocation, and beamforming in DM networks. A machine learning-based DOA measurement method is proposed to make a substantial SR performance gain compared to single-snapshot measurement without machine learning for a given null-space projection beamforming scheme. However, for a conventional DM network, there still exists a serious secure issue: the eavesdropper moves inside the main beam of the desired user and may intercept the confidential messages intended to the desired users because the beamforming vector of confidential messages and AN projection matrix are only angle-dependence. To address this problem, we present a new concept of secure and precise transmission, where the transmit waveform has two-dimensional even three-dimensional dependence by using DM, random frequency selection, and phase alignment at DM transmitter.

cs.IT↗

Segmented Successive Cancellation List Polar Decoding with Tailored CRC

As the first error correction codes provably achieving the symmetric capacity of binary-input discrete memory-less channels (B-DMCs), polar codes have been recently chosen by 3GPP for eMBB control channel. Among existing algorithms, CRC-aided successive cancellation list (CA-SCL) decoding is favorable due to its good performance, where CRC is placed at the end of the decoding and helps to eliminate the invalid candidates before final selection. However, the good performance is obtained with a complexity increase that is linear in list size $L$. In this paper, the tailored CRC-aided SCL (TCA-SCL) decoding is proposed to balance performance and complexity. Analysis on how to choose the proper CRC for a given segment is proposed with the help of \emph{virtual transform} and \emph{virtual length}. For further performance improvement, hybrid automatic repeat request (HARQ) scheme is incorporated. Numerical results have shown that, with the similar complexity as the state-of-the-art, the proposed TCA-SCL and HARQ-TCA-SCL schemes achieve $0.1$ dB and $0.25$ dB performance gain at frame error rate $\textrm{FER}=10^{-2}$, respectively. Finally, an efficient TCA-SCL decoder is implemented with FPGA demonstrating its advantages over CA-SCL decoder.

eess.SP↗

Synthesizing a Clock Signal with Reactions---Part I: Duty Cycle Implementation Based on Gears

Timing is of fundamental importance in biology and our life. Borrowing ideas from mechanism, we map our clock signals onto a gear system, in pursuit of better depiction of a clock signal implemented with chemical reaction networks (CRNs). On a chassis of gear theory, more quantitative descriptions are offered for our method. Inspired by gears, our work to synthesize a tunable clock signal could be divided into two parts. Part I, this paper, mainly focuses on the implementation of clock signals with three types of duty cycles, namely $1/2$, $1/N$ ($N > 2$), and $M/N$. Part II devotes itself in addressing frequency alteration issues of clock signals. \textcolor{black}{Guaranteed by existing literature, the experimental chassis can be taken care of by DNA strand displacement reactions, which lay a solid foundation for the physical implementation of nearly arbitrary CRNs.

q-bio.MN↗

Synthesizing a Clock Signal with Reactions---Part II: Frequency Alteration Based on Gears

On a chassis of gear model, we have offered a quantitative description for our method to synthesize a chemical clock signal with various duty cycles in Part I. As Part II of the study, this paper devotes itself in proposing a design methodology to handle frequency alteration issues for the chemical clock, including both frequency division and frequency multiplication. Several interesting examples are provided for a better explanation of our contribution. All the simulation results verify and validate the correctness and efficiency of our proposal.

q-bio.MN↗

On the Low-Complexity, Hardware-Friendly Tridiagonal Matrix Inversion for Correlated Massive MIMO Systems

In massive MIMO (M-MIMO) systems, one of the key challenges in the implementation is the large-scale matrix inversion operation, as widely used in channel estimation, equalization, detection, and decoding procedures. Traditionally, to handle this complexity issue, several low-complexity matrix inversion approximation methods have been proposed, including the classic Cholesky decomposition and the Neumann series expansion (NSE). However, the conventional approaches failed to exploit neither the special structure of channel matrices nor the critical issues in the hardware implementation, which results in poorer throughput performance and longer processing delay. In this paper, by targeting at the correlated M-MIMO systems, we propose a modified NSE based on tridiagonal matrix inversion approximation (TMA) to accommodate the complexity as well as the performance issue in the conventional hardware implementation, and analyze the corresponding approximation errors. Meanwhile, we investigate the VLSI implementation for the proposed detection algorithm based on a Xilinx Virtex-7 XC7VX690T FPGA platform. It is shown that for correlated massive MIMO systems, it can achieve near-MMSE performance and $630$ Mb/s throughput. Compared with other benchmark systems, the proposed pipelined TMA detector can get high throughput-to-hardware ratio. Finally, we also propose a fast iteration structure for further research.

eess.SP↗

Residual-Based Detections and Unified Architecture for Massive MIMO Uplink

Massive multiple-input multiple-output (M-MIMO) technique brings better energy efficiency and coverage but higher computational complexity than small-scale MIMO. For linear detections such as minimum mean square error (MMSE), prohibitive complexity lies in solving large-scale linear equations. For a better trade-off between bit-error-rate (BER) performance and computational complexity, iterative linear algorithms like conjugate gradient (CG) have been applied and have shown their feasibility in recent years. In this paper, residual-based detection (RBD) algorithms are proposed for M-MIMO detection, including minimal residual (MINRES) algorithm, generalized minimal residual (GMRES) algorithm, and conjugate residual (CR) algorithm. RBD algorithms focus on the minimization of residual norm per iteration, whereas most existing algorithms focus on the approximation of exact signal. Numerical results have shown that, for $64$-QAM $128\times 8$ MIMO, RBD algorithms are only $0.13$ dB away from the exact matrix inversion method when BER$=10^{-4}$. Stability of RBD algorithms has also been verified in various correlation conditions. Complexity comparison has shown that, CR algorithm require $87\%$ less complexity than the traditional method for $128\times 60$ MIMO. The unified hardware architecture is proposed with flexibility, which guarantees a low-complexity implementation for a family of RBD M-MIMO detectors.

eess.SP↗

Molecular Computing for Markov Chains

In this paper, it is presented a methodology for implementing arbitrarily constructed time-homogenous Markov chains with biochemical systems. Not only discrete but also continuous-time Markov chains are allowed to be computed. By employing chemical reaction networks (CRNs) as a programmable language, molecular concentrations serve to denote both input and output values. One reaction network is elaborately designed for each chain. The evolution of species' concentrations over time well matches the transient solutions of the target continuous-time Markov chain, while equilibrium concentrations can indicate the steady state probabilities. Additionally, second-order Markov chains are considered for implementation, with bimolecular reactions rather that unary ones. An original scheme is put forward to compile unimolecular systems to DNA strand displacement reactions for the sake of future physical implementations. Deterministic, stochastic and DNA simulations are provided to enhance correctness, validity and feasibility.

q-bio.MN↗