arXiv subjects

Xiaohu You

Publications and source records attributed to Xiaohu You.

At least 145 records · Page 8Linked to original sources

arXiv2022

Spatiotemporal 2-D Channel Coding for Very Low Latency Reliable MIMO Transmission

To fully support vertical industries, 5G and its corresponding channel coding are expected to meet requirements of different applications. However, for applications of 5G and beyond 5G (B5G) such as URLLC, the transmission latency is required to be much shorter than that in eMBB. Therefore, the resulting channel code length reduces drastically. In this case, the traditional 1-D channel coding suffers a lot from the performance degradation and fails to deliver strong reliability with very low latency. To remove this bottleneck, new channel coding scheme beyond the existing 1-D one is in urgent need. By making full use of the spacial freedom of massive MIMO systems, this paper devotes itself in proposing a spatiotemporal 2-D channel coding for very low latency reliable transmission. For a very short time-domain code length $N^{\text{time}}=16$, $64 \times 128$ MIMO system employing the proposed spatiotemporal 2-D coding scheme successfully shows more than $3$\,dB performance gain at $\text{FER}=10^{-3}$, compared to the 1-D time-domain channel coding. It is noted that the proposed coding scheme is suitable for different channel codes and enjoys high flexibility to adapt to difference scenarios. By appropriately selecting the code rate, code length, and the number of codewords in the time and space domains, the proposed coding scheme can achieve a good trade-off between the transmission latency and reliability.

cs.IT↗

arXiv2021

Soft-Output Joint Channel Estimation and Data Detection using Deep Unfolding

We propose a novel soft-output joint channel estimation and data detection (JED) algorithm for multiuser (MU) multiple-input multiple-output (MIMO) wireless communication systems. Our algorithm approximately solves a maximum a-posteriori JED optimization problem using deep unfolding and generates soft-output information for the transmitted bits in every iteration. The parameters of the unfolded algorithm are computed by a hyper-network that is trained with a binary cross entropy (BCE) loss. We evaluate the performance of our algorithm in a coded MU-MIMO system with 8 basestation antennas and 4 user equipments and compare it to state-of-the-art algorithms separate channel estimation from soft-output data detection. Our results demonstrate that our JED algorithm outperforms such data detectors with as few as 10 iterations.

cs.IT↗

arXiv2021

Open-Source Multi-Access Edge Computing for 6G: Opportunities and Challenges

Multi-access edge computing (MEC) is capable of meeting the challenging requirements of next-generation networks, e.g., 6G, as a benefit of providing computing and caching capabilities in the close proximity of the users. However, the traditional MEC architecture relies on specialized hardware and its bespoke software functions are closely integrated with the hardware, hence it is too rigid for supporting the rapidly evolving scenarios in the face of the demanding requirements of 6G. As a remedy, we conceive the compelling concept of open-source cellular networking and intrinsically amalgamate it with MEC, which is defined by open-source software running on general-purpose hardware platforms. Specifically, an open-source MEC (OS-MEC) scheme is presented relying on a pair of core principles: the decoupling of the MEC functions and resources from each other with the aid of network function virtualization (NFV); as well as the reconfiguration of the disaggregated MEC functions and resources into customized edge instances. This philosophy allows operators to adaptively customize their users' networks. Then, we develop improved networking functions for OS-MEC decoupling and discuss both its key components as well as the process of OS-MEC reconfiguration. The typical use cases of the proposed OS-MEC scheme are characterized with the aid of a small-scale test network. Finally, we discuss some of the potential open-source-related technical challenges when facing 6G.

cs.NI↗

arXiv2021

Joint Channel Estimation and Data Detection in Cell-Free Massive MU-MIMO Systems

We propose a joint channel estimation and data detection (JED) algorithm for densely-populated cell-free massive multiuser (MU) multiple-input multiple-output (MIMO) systems, which reduces the channel training overhead caused by the presence of hundreds of simultaneously transmitting user equipments (UEs). Our algorithm iteratively solves a relaxed version of a maximum a-posteriori JED problem and simultaneously exploits the sparsity of cell-free massive MU-MIMO channels as well as the boundedness of QAM constellations. In order to improve the performance and convergence of the algorithm, we propose methods that permute the access point and UE indices to form so-called virtual cells, which leads to better initial solutions. We assess the performance of our algorithm in terms of root-mean-squared-symbol error, bit error rate, and mutual information, and we demonstrate that JED significantly reduces the pilot overhead compared to orthogonal training, which enables reliable communication with short packets to a large number of UEs.

cs.IT↗

arXiv2021

Beamforming and Transmit Power Design for Intelligent Reconfigurable Surface-aided Secure Spatial Modulation

Intelligent reflecting surface (IRS) is a promising solution to build a programmable wireless environment for future communication systems, in which the reflector elements steer the incident signal in fully customizable ways by passive beamforming. In this paper, an IRS-aided secure spatial modulation (SM) is proposed, where the IRS perform passive beamforming and information transfer simultaneously by adjusting the on-off states of the reflecting elements. We formulate an optimization problem to maximize the average secrecy rate (SR) by jointly optimizing the passive beamforming at IRS and the transmit power at transmitter under the consideration that the direct pathes channels from transmitter to receivers are obstructed by obstacles. As the expression of SR is complex, we derive a newly fitting expression (NASR) for the expression of traditional approximate SR (TASR), which has simpler closed-form and more convenient for subsequent optimization. Based on the above two fitting expressions, three beamforming methods, called maximizing NASR via successive convex approximation (Max-NASR-SCA), maximizing NASR via dual ascent (Max-NASR-DA) and maximizing TASR via semi-definite relaxation (Max-TASR-SDR) are proposed to improve the SR performance. Additionally, two transmit power design (TPD) methods are proposed based on the above two approximate SR expressions, called Max-NASR-TPD and Max-TASR-TPD. Simulation results show that the proposed Max-NASR-DA and Max-NASR-SCA IRS beamformers harvest substantial SR performance gains over Max-TASR-SDR. For TPD, the proposed Max-NASR-TPD performs better than Max-TASR-TPD. Particularly, the Max-NASR-TPD has a closed-form solution.

cs.IT↗

arXiv2021

Spectral Efficiency Analysis of Cell-free Distributed Massive MIMO Systems with Imperfect Covariance Matrix

In this paper, the impacts of imperfect channel covariance matrix on the spectral efficiency (SE) of cell-free distributed massive multiple-input multiple-output (MIMO) systems are analyzed. We propose to estimate the channel covariance matrix by alternately using the assigned pilots and their phase-shifted pilots in different coherent blocks, which improves the accuracy of channel estimation with imperfect covariance matrix and reduces pilot overhead. Under this scheme, the closed-form expressions of SE with maximum ratio combination (MRC) and zero-forcing (ZF) receivers are derived, which enables us to select key parameters for better system performance. Simulation results verify the effectiveness of the proposed channel estimation method and the accuracy of the derived closed-form expressions. When more coherent blocks are used to estimate the covariance matrix, we can get better system performance. Moreover, some insightful conclusions are arrived at from the SE comparisons between different receiving schemes (ZF and MRC) and different pilot allocation schemes (orthogonal pilot and pilot reuse).

cs.IT↗

arXiv2021

A Novel 3D Non-Stationary GBSM for 6G THz Ultra-Massive MIMO Wireless Systems

Terahertz (THz) communication is now being considered as one of possible technologies for the sixth generation (6G) wireless communication systems. In this paper, a novel three-dimensional (3D) space-time-frequency non-stationary theoretical channel model is first proposed for 6G THz wireless communication systems employing ultra-massive multiple-input multiple-output (MIMO) technologies with long traveling paths. Considering frequency-dependent diffuse scattering, which is a special property of THz channels different from millimeter wave (mmWave) channels, the relative angles and delays of rays within one cluster will evolve in the frequency domain. Then, a corresponding simulation model is proposed with discrete angles calculated using the method of equal area (MEA). The statistical properties of the proposed theoretical and simulation models are derived and compared, showing good agreements. The accuracy and flexibility of the proposed simulation model are demonstrated by comparing the simulation results of the relative angle spread and root mean square (RMS) delay spread with corresponding measurements.

eess.SP↗

arXiv2021

Cooperative Reflection Design with Timing Offsets in Distributed Multi-RIS Communications

This letter investigates a wireless communication system deploying distributed reconfigurable intelligent surfaces (RISs). Existing works have assumed that perfect timing synchronization is available among all the cooperative RISs. For practical considerations, we first study cooperative reflection design for multi-RIS-aided communication systems taking into account timing synchronization errors. We aim to minimize the mean-squared error of the recovered data in the presence of timing offsets subject to the unit modulus constraints imposed on the phase shifts of the RISs. In order to handle this sophisticated nonconvex problem, we develop a computationally-efficient algorithm based on the majorization-minimization framework where the RIS phase shift matrices and the timing offset equalizer are respectively developed in a semi-closed form and a closed form. Numerical examples validate the improved performance of our proposed design compared with various schemes.

cs.IT↗

arXiv2021

A Lightweight Deep Network for Efficient CSI Feedback in Massive MIMO Systems

To fully exploit the advantages of massive multiple-input multiple-output (m-MIMO), accurate channel state information (CSI) is required at the transmitter. However, excessive CSI feedback for large antenna arrays is inefficient and thus undesirable in practical applications. By exploiting the inherent correlation characteristics of complex-valued channel responses in the angular-delay domain, we propose a novel neural network (NN) architecture, namely ENet, for CSI compression and feedback in m-MIMO. Even if the ENet processes the real and imaginary parts of the CSI values separately, its special structure enables the network trained for the real part only to be reused for the imaginary part. The proposed ENet shows enhanced performance with the network size reduced by nearly an order of magnitude compared to the existing NN-based solutions. Experimental results verify the effectiveness of the proposed ENet.

cs.IT↗

arXiv2021

Reconfigurable Intelligent Surfaces for 6G Systems: Principles, Applications, and Research Directions

Reconfigurable intelligent surfaces (RISs) or intelligent reflecting surfaces (IRSs), are regarded as one of the most promising and revolutionizing techniques for enhancing the spectrum and/or energy efficiency of wireless systems. These devices are capable of reconfiguring the wireless propagation environment by carefully tuning the phase shifts of a large number of low-cost passive reflecting elements. In this article, we aim for answering four fundmental questions: 1) Why do we need RISs? 2) What is an RIS? 3) What are RIS's applications? 4) What are the relevant challenges and future research directions? In response, eight promising research directions are pointed out.

eess.SP↗

arXiv2021

NOMA for Next-generation Massive IoT: Performance Potential and Technology Directions

Broader applications of the Internet of Things (IoT) are expected in the forthcoming 6G system, although massive IoT is already a key scenario in 5G, predominantly relying on physical layer solutions inherited from 4G LTE and primarily using orthogonal multiple access (OMA). In 6G IoT, supporting a massive number of connections will be required for diverse services of the vertical sectors, prompting fundamental studies on how to improve the spectral efficiency of the system. One of the key enabling technologies is non-orthogonal multiple access (NOMA). This paper consists of two parts. In the first part, finite block length theory and the diversity order of multi-user systems will be used to show the significant potential of NOMA compared to traditional OMA. The supremacy of NOMA over OMA is particularly pronounced for asynchronous contention-based systems relying on imperfect link adaptation, which are commonly assumed for massive IoT systems. To approach these performance bounds, in the second part of the paper, several promising technology directions are proposed for 6G massive IoT, including linear spreading, joint spreading & modulation, multi-user channel coding in the context of various techniques for practical uncoordinated transmissions, cell-free operations, etc., from the perspective of NOMA.

cs.IT↗

arXiv2021

Spatial Modulation: an Attractive Secure Solution to Future Wireless Network

As a green and secure wireless transmission method, secure spatial modulation (SM) is becoming a hot research area. Its basic idea is to exploit both the index of activated transmit antenna and amplitude phase modulation signal to carry messages, improve security, and save energy. In this paper, we review its crucial challenges: transmit antenna selection (TAS), artificial noise (AN) projection, power allocation (PA) and joint detection at the desired receiver. As the size of signal constellation tends to medium-scale or large-scale, the complexity of traditional maximum likelihood detector becomes prohibitive. To reduce this complexity, a low-complexity maximum likelihood (ML) detector is proposed. To further enhance the secrecy rate (SR) performance, a deep-neural-network (DNN) PA strategy is proposed. Simulation results show that the proposed low-complexity ML detector, with a lower-complexity, has the same bit error rate performance as the joint ML method while the proposed DNN method strikes a good balance between complexity and SR performance.

cs.IT↗

arXiv2021

Privacy-preserving Channel Estimation in Cell-free Hybrid Massive MIMO Systems

We consider a cell-free hybrid massive multiple-input multiple-output (MIMO) system with $K$ users and $M$ access points (APs), each with $N_a$ antennas and $N_r< N_a$ radio frequency (RF) chains. When $K\ll M{N_a}$, efficient uplink channel estimation and data detection with reduced number of pilots can be performed based on low-rank matrix completion. However, such a scheme requires the central processing unit (CPU) to collect received signals from all APs, which may enable the CPU to infer the private information of user locations. We therefore develop and analyze privacy-preserving channel estimation schemes under the framework of differential privacy (DP). As the key ingredient of the channel estimator, two joint differentially private noisy matrix completion algorithms based respectively on Frank-Wolfe iteration and singular value decomposition are presented. We provide an analysis on the tradeoff between the privacy and the channel estimation error. In particular, we show that the estimation error can be mitigated while maintaining the same privacy level by increasing the payload size with fixed pilot size; and the scaling laws of both the privacy-induced and privacy-independent error components in terms of payload size are characterized. Simulation results are provided to further demonstrate the tradeoff between privacy and channel estimation performance.

cs.IT↗

arXiv2021

A General 3D Non-Stationary Wireless Channel Model for 5G and Beyond

In this paper, a novel three-dimensional (3D) non-stationary geometry-based stochastic model (GBSM) for the fifth generation (5G) and beyond 5G (B5G) systems is proposed. The proposed B5G channel model (B5GCM) is designed to capture various channel characteristics in (B)5G systems such as space-time-frequency (STF) non-stationarity, spherical wavefront (SWF), high delay resolution, time-variant velocities and directions of motion of the transmitter, receiver, and scatterers, spatial consistency, etc. By combining different channel properties into a general channel model framework, the proposed B5GCM is able to be applied to multiple frequency bands and multiple scenarios, including massive multiple-input multiple-output (MIMO), vehicle-to-vehicle (V2V), high-speed train (HST), and millimeter wave-terahertz (mmWave-THz) communication scenarios. Key statistics of the proposed B5GCM are obtained and compared with those of standard 5G channel models and corresponding measurement data, showing the generalization and usefulness of the proposed model.

eess.SP↗

arXiv2021

True-data Testbed for 5G/B5G Intelligent Network

Future beyond fifth-generation (B5G) and sixth-generation (6G) mobile communications will shift from facilitating interpersonal communications to supporting Internet of Everything (IoE), where intelligent communications with full integration of big data and artificial intelligence (AI) will play an important role in improving network efficiency and providing high-quality service. As a rapid evolving paradigm, the AI-empowered mobile communications demand large amounts of data acquired from real network environment for systematic test and verification. Hence, we build the world's first true-data testbed for 5G/B5G intelligent network (TTIN), which comprises 5G/B5G on-site experimental networks, data acquisition & data warehouse, and AI engine & network optimization. In the TTIN, true network data acquisition, storage, standardization, and analysis are available, which enable system-level online verification of B5G/6G-orientated key technologies and support data-driven network optimization through the closed-loop control mechanism. This paper elaborates on the system architecture and module design of TTIN. Detailed technical specifications and some of the established use cases are also showcased.

cs.NI↗

arXiv2020

Low-complexity and High-performance Receive Beamforming for Secure Directional Modulation Networks against an Eavesdropping-enabled Full-duplex Attacker

In this paper, we present a novel scenario for directional modulation (DM) networks with a full-duplex (FD) malicious attacker (Mallory), where Mallory can eavesdrop the confidential message from Alice to Bob and simultaneously interfere Bob by sending a jamming signal. Considering that the jamming plus noise at Bob is colored, an enhanced receive beamforming (RBF), whitening-filter-based maximum ratio combining (MRC) (WFMRC), is proposed. Subsequently, two RBFs of maximizing the secrecy rate (Max-SR) and minimum mean square error (MMSE) are presented to show the same performance as WFMRC. To reduce the computational complexity of conventional MMSE, a low-complexity MMSE is also proposed. Eventually, to completely remove the jamming signal from Mallory and transform the residual interference plus noise to a white one, a new RBF, null-space projection (NSP) based maximizing WF receive power, called NSP-based Max-WFRP, is also proposed. From simulation results, we find that the proposed Max-SR, WFMRC, and low-complexity MMSE have the same SR performance as conventional MMSE, and achieve the best performance while the proposed NSP-based Max-WFRP performs better than MRC in the medium and high signal-to-noise ratio regions. Due to its low-complexity,the proposed low-complexity MMSE is very attractive. More important, the proposed methods are robust to the change in malicious jamming power compared to conventional MRC.

cs.IT↗

arXiv2020

Channel Estimation and Hybrid Precoding for Distributed Phased Arrays Based MIMO Wireless Communications

Distributed phased arrays based multiple-input multiple-output (DPA-MIMO) is a newly introduced architecture that enables both spatial multiplexing and beamforming while facilitating highly reconfigurable hardware implementation in millimeter-wave (mmWave) frequency bands. With a DPA-MIMO system, we focus on channel state information (CSI) acquisition and hybrid precoding. As benefited from a coordinated and open-loop pilot beam pattern design, all the sub-arrays can perform channel sounding with less training overhead compared with the traditional orthogonal operation of each sub-array. Furthermore, two sparse channel recovery algorithms, known as joint orthogonal matching pursuit (JOMP) and joint sparse Bayesian learning with $\ell_2$ reweighting (JSBL-$\ell_2$), are proposed to exploit the hidden structured sparsity in the beam-domain channel vector. Finally, successive interference cancellation (SIC) based hybrid precoding through sub-array grouping is illustrated for the DPA-MIMO system, which decomposes the joint sub-array RF beamformer design into an interactive per-sub-array-group handle. Simulation results show that the proposed two channel estimators fully take advantage of the partial coupling characteristic of DPA-MIMO channels to perform channel recovery, and the proposed hybrid precoding algorithm is suitable for such array-of-sub-arrays architecture with satisfactory performance and low complexity.

cs.IT↗

arXiv2020

6G Oriented Wireless Communication Channel Characteristics Analysis and Modeling

Based on the vision on the 6G wireless communication network, i.e., global coverage, all spectrums and all applications, we comprehensively survey 6G related wireless channel measurements, channel characteristics, and channel models for all frequency bands and all scenarios. Millimeter wave (mmWave), terahertz (THz), optical band, satellite, unmanned aerial vehicle (UAV), maritime, underwater acoustic, high-speed train (HST), vehicle-to-vehicle (V2V), massive/ ultra-massive multiple-input multiple-output (MIMO), orbital angular momentum (OAM), and industry Internet of things (IoT) communication channels were particularly investigated. The related 6G channel measurement and modeling results were also given. Finally, future research challenges on 6G channel measurements and modeling were pointed out.

eess.SP↗