arXiv subjects

Xiaoming Xie

Publications and source records attributed to Xiaoming Xie.

41 records · Page 3Linked to original sources

arXiv2014

Characterization of superconducting nanowire single-photon detector with artificial constrictions

Statistical studies on the performance of different superconducting nanowire single-photon detectors (SNSPDs) on one chip suggested that random constrictions existed in the nanowire that were barely registered by scanning electron microscopy. With the aid of advanced e-beam lithography, artificial geometric constrictions were fabricated on SNSPDs as well as single nanowires. In this way, we studied the influence of artificial constrictions on SNSPDs in a straight forward manner. By introducing artificial constrictions with different wire widths in single nanowires, we concluded that the dark counts of SNSPDs originate from a single constriction. Further introducing artificial constrictions in SNSPDs, we studied the relationship between detection efficiency and kinetic inductance and the bias current, confirming the hypothesis that constrictions exist in SNSPDs.

cond-mat.supr-con↗

arXiv2013

Precisely aligned graphene grown on hexagonal boron nitride by catalyst free chemical vapor deposition

To grow precisely aligned graphene on h-BN without metal catalyst is extremely important, which allows for intriguing physical properties and devices of graphene/h-BN hetero-structure to be studied in a controllable manner. In this report, such hetero-structures were fabricated and investigated by atomic resolution scanning probe microscopy. Moirre patterns are observed and the sensitivity of moirre interferometry proves that the graphene grains can align precisely with the underlying h-BN lattice within an error of less than 0.05 degree. The occurrence of moirre pattern clearly indicates that the graphene locks into h-BN via van der Waals epitaxy with its interfacial stress greatly released. It is worthy to note that the edges of the graphene grains are primarily oriented along the armchair direction. The field effect mobility in such graphene flakes exceeds 20,000 cm2/V.s at ambient condition. This work opens the door of atomic engineering of graphene on h-BN, and sheds light on fundamental research as well as electronic applications based on graphene/h-BN hetero-structure.

cond-mat.mtrl-sci↗

arXiv2013

Jitter analysis of a superconducting nanowire single photon detector

Jitter is one of the key parameters for a superconducting nanowire single photon detector (SNSPD). Using an optimized time-correlated single photon counting system for jitter measurement, we extensively studied the dependence of system jitter on the bias current and working temperature. The signal-to-noise ratio of the single-photon-response pulse was proven to be an important factor in system jitter. The final system jitter was reduced to 18 ps by using a high-critical-current SNSPD, which showed an intrinsic SNSPD jitter of 15 ps. A laser ranging experiment using a 15-ps SNSPD achieved a record depth resolution of 3 mm at a wavelength of 1550 nm.

cond-mat.supr-con↗

arXiv2013

Time-of-flight laser ranging and imaging at 1550 nm using low-jitter superconducting nanowire single-photon detection system

We developed a time-correlated single-photon counting (TCSPC) system based on the low-jitter superconducting nanowire single-photon detection (SNSPD) technology. The causes of jitters in the TCSPC system were analyzed. Owing to the low jitter of the SNSPD technology, a system jitter of 26.8 ps full-width at half-maximum was achieved after optimizing the system. We demonstrated time-of-flight laser ranging at 1550 nm wavelength at a stand-off distance of 115 m, based on this TCSPC system. A depth resolution of 4 mm was achieved directly by locating the centroids of each of the two return signals. Laser imaging was also performed using the TCSPC system. This low-jitter TCSPC system using the SNSPD technology presents great potential in long-range measurements and imaging applications for low-energy-level and eye-safe laser systems

physics.ins-det↗

arXiv2012

Triggering the Continuous Growth of Graphene toward Millimeter Size Grain

In this report, we demonstrated a simple but efficient strategy to synthesize millimeter-sized graphene single crystal grains by regulating the supply of reactants in chemical vapor deposition process. Polystyrene was used as a carbon source. Pulse heating on the carbon source was utilized to minimize the nucleation density of graphene on copper foil, while the gradual increase in the temperature of carbon source and the flow rate of hydrogen is adapted to drive the continuous growth of graphene grain. As a result, the nucleation density of graphene grain can be controlled as lower as ~100 nuclei/cm2, and the dimension of single crystal grain could grow up to ~1.2 mm. Raman spectroscopy, transmission electron microscopy and electrical transport measurement show that the graphene grains obtained are in high quality. The strategy presented here provides very good controllability and enables the possibility for large graphene single crystals, which is of vital importance for practical applications.

cond-mat.mtrl-sci↗