arXiv subjects

Xiaowei Zhou

Publications and source records attributed to Xiaowei Zhou.

At least 145 records · Page 8Linked to original sources

arXiv2018

PVNet: Pixel-wise Voting Network for 6DoF Pose Estimation

This paper addresses the challenge of 6DoF pose estimation from a single RGB image under severe occlusion or truncation. Many recent works have shown that a two-stage approach, which first detects keypoints and then solves a Perspective-n-Point (PnP) problem for pose estimation, achieves remarkable performance. However, most of these methods only localize a set of sparse keypoints by regressing their image coordinates or heatmaps, which are sensitive to occlusion and truncation. Instead, we introduce a Pixel-wise Voting Network (PVNet) to regress pixel-wise unit vectors pointing to the keypoints and use these vectors to vote for keypoint locations using RANSAC. This creates a flexible representation for localizing occluded or truncated keypoints. Another important feature of this representation is that it provides uncertainties of keypoint locations that can be further leveraged by the PnP solver. Experiments show that the proposed approach outperforms the state of the art on the LINEMOD, Occlusion LINEMOD and YCB-Video datasets by a large margin, while being efficient for real-time pose estimation. We further create a Truncation LINEMOD dataset to validate the robustness of our approach against truncation. The code will be avaliable at https://zju-3dv.github.io/pvnet/.

cs.CV↗

arXiv2018

Learning to Estimate 3D Human Pose and Shape from a Single Color Image

This work addresses the problem of estimating the full body 3D human pose and shape from a single color image. This is a task where iterative optimization-based solutions have typically prevailed, while Convolutional Networks (ConvNets) have suffered because of the lack of training data and their low resolution 3D predictions. Our work aims to bridge this gap and proposes an efficient and effective direct prediction method based on ConvNets. Central part to our approach is the incorporation of a parametric statistical body shape model (SMPL) within our end-to-end framework. This allows us to get very detailed 3D mesh results, while requiring estimation only of a small number of parameters, making it friendly for direct network prediction. Interestingly, we demonstrate that these parameters can be predicted reliably only from 2D keypoints and masks. These are typical outputs of generic 2D human analysis ConvNets, allowing us to relax the massive requirement that images with 3D shape ground truth are available for training. Simultaneously, by maintaining differentiability, at training time we generate the 3D mesh from the estimated parameters and optimize explicitly for the surface using a 3D per-vertex loss. Finally, a differentiable renderer is employed to project the 3D mesh to the image, which enables further refinement of the network, by optimizing for the consistency of the projection with 2D annotations (i.e., 2D keypoints or masks). The proposed approach outperforms previous baselines on this task and offers an attractive solution for direct prediction of 3D shape from a single color image.

cs.CV↗

arXiv2018

Ordinal Depth Supervision for 3D Human Pose Estimation

Our ability to train end-to-end systems for 3D human pose estimation from single images is currently constrained by the limited availability of 3D annotations for natural images. Most datasets are captured using Motion Capture (MoCap) systems in a studio setting and it is difficult to reach the variability of 2D human pose datasets, like MPII or LSP. To alleviate the need for accurate 3D ground truth, we propose to use a weaker supervision signal provided by the ordinal depths of human joints. This information can be acquired by human annotators for a wide range of images and poses. We showcase the effectiveness and flexibility of training Convolutional Networks (ConvNets) with these ordinal relations in different settings, always achieving competitive performance with ConvNets trained with accurate 3D joint coordinates. Additionally, to demonstrate the potential of the approach, we augment the popular LSP and MPII datasets with ordinal depth annotations. This extension allows us to present quantitative and qualitative evaluation in non-studio conditions. Simultaneously, these ordinal annotations can be easily incorporated in the training procedure of typical ConvNets for 3D human pose. Through this inclusion we achieve new state-of-the-art performance for the relevant benchmarks and validate the effectiveness of ordinal depth supervision for 3D human pose.

cs.CV↗

arXiv2018

Multi-Image Semantic Matching by Mining Consistent Features

This work proposes a multi-image matching method to estimate semantic correspondences across multiple images. In contrast to the previous methods that optimize all pairwise correspondences, the proposed method identifies and matches only a sparse set of reliable features in the image collection. In this way, the proposed method is able to prune nonrepeatable features and also highly scalable to handle thousands of images. We additionally propose a low-rank constraint to ensure the geometric consistency of feature correspondences over the whole image collection. Besides the competitive performance on multi-graph matching and semantic flow benchmarks, we also demonstrate the applicability of the proposed method for reconstructing object-class models and discovering object-class landmarks from images without using any annotation.

cs.CV↗

arXiv2018

Human Motion Capture Using a Drone

Current motion capture (MoCap) systems generally require markers and multiple calibrated cameras, which can be used only in constrained environments. In this work we introduce a drone-based system for 3D human MoCap. The system only needs an autonomously flying drone with an on-board RGB camera and is usable in various indoor and outdoor environments. A reconstruction algorithm is developed to recover full-body motion from the video recorded by the drone. We argue that, besides the capability of tracking a moving subject, a flying drone also provides fast varying viewpoints, which is beneficial for motion reconstruction. We evaluate the accuracy of the proposed system using our new DroCap dataset and also demonstrate its applicability for MoCap in the wild using a consumer drone.

cs.CV↗

arXiv2018

MonoCap: Monocular Human Motion Capture using a CNN Coupled with a Geometric Prior

Recovering 3D full-body human pose is a challenging problem with many applications. It has been successfully addressed by motion capture systems with body worn markers and multiple cameras. In this paper, we address the more challenging case of not only using a single camera but also not leveraging markers: going directly from 2D appearance to 3D geometry. Deep learning approaches have shown remarkable abilities to discriminatively learn 2D appearance features. The missing piece is how to integrate 2D, 3D and temporal information to recover 3D geometry and account for the uncertainties arising from the discriminative model. We introduce a novel approach that treats 2D joint locations as latent variables whose uncertainty distributions are given by a deep fully convolutional neural network. The unknown 3D poses are modeled by a sparse representation and the 3D parameter estimates are realized via an Expectation-Maximization algorithm, where it is shown that the 2D joint location uncertainties can be conveniently marginalized out during inference. Extensive evaluation on benchmark datasets shows that the proposed approach achieves greater accuracy over state-of-the-art baselines. Notably, the proposed approach does not require synchronized 2D-3D data for training and is applicable to "in-the-wild" images, which is demonstrated with the MPII dataset.

cs.CV↗

arXiv2018

Polar Transformer Networks

Convolutional neural networks (CNNs) are inherently equivariant to translation. Efforts to embed other forms of equivariance have concentrated solely on rotation. We expand the notion of equivariance in CNNs through the Polar Transformer Network (PTN). PTN combines ideas from the Spatial Transformer Network (STN) and canonical coordinate representations. The result is a network invariant to translation and equivariant to both rotation and scale. PTN is trained end-to-end and composed of three distinct stages: a polar origin predictor, the newly introduced polar transformer module and a classifier. PTN achieves state-of-the-art on rotated MNIST and the newly introduced SIM2MNIST dataset, an MNIST variation obtained by adding clutter and perturbing digits with translation, rotation and scaling. The ideas of PTN are extensible to 3D which we demonstrate through the Cylindrical Transformer Network.

cs.CV↗

arXiv2017

Influence of Bi addition on the property of Ag-Bi nano-composite coatings

Silver (Ag) coatings have been widely used in many industry areas due to their excellent conductivity. However, wider applications of Ag coatings have been hindered by their poor mechanical properties. In this research, to improve the mechanical performance, Ag-Bi nano-composite coatings were prepared by a novel ionic co-discharge method. A systematic study of the microstructure, mechanical properties, electrical conductivity and antibacterial behavior of the resulting coating was performed. The results indicated that after adding an appropriate amount of Bi containing solution into the Ag plating solution, Ag-Bi nano-particles were in-situ formed and distributed uniformly throughout the coating matrix, resulting in a significant improvement in the mechanical properties. The hardness of Ag-Bi coating was increased by 60% compared to that of the pure Ag coating. The corrosion resistance of Ag-Bi coatings was also enhanced. The outcome of this research may find a broader application in electronics, jewelry, aerospace and other industries.

cond-mat.mtrl-sci↗

arXiv2017

Microstructure and properties of Cu-Sn-Zn-TiO2 Nano-composite coatings on mild steel

Cu-Sn-Zn coatings have been widely used in industry for their unique properties, such as good conductivity, high corrosion resistance and excellent solderability. To further improve the mechanical performance of Cu-Sn-Zn coatings, powder-enhanced method was applied in the current study and Cu-Sn-Zn-TiO2 nano-composite coatings with different TiO2 concentration were fabricated. The microstructure of Cu-Sn-Zn-TiO2 nano-composite coatings were investigated by X-ray diffraction (XRD) and Scanning Electron Microscopy (SEM). The mechanical properties of coatings including microhardness and wear resistance were studied. The results indicate that the incorporation of TiO2 nanoparticle can significantly influence the properties of Cu-Sn-Zn coatings. The microhardness of Cu-Sn-Zn coating was increased to 383 HV from 330 HV with 1g/L TiO2 addition. Also, the corrosion resistance of coating was enhanced. The effects of TiO2 nanoparticle concentration on the microstructure, mechanical properties and corrosion resistance of Cu-Sn-Zn-TiO2 nano-composite coatings were discussed.

physics.app-ph↗

arXiv2017

Coarse-to-Fine Volumetric Prediction for Single-Image 3D Human Pose

This paper addresses the challenge of 3D human pose estimation from a single color image. Despite the general success of the end-to-end learning paradigm, top performing approaches employ a two-step solution consisting of a Convolutional Network (ConvNet) for 2D joint localization and a subsequent optimization step to recover 3D pose. In this paper, we identify the representation of 3D pose as a critical issue with current ConvNet approaches and make two important contributions towards validating the value of end-to-end learning for this task. First, we propose a fine discretization of the 3D space around the subject and train a ConvNet to predict per voxel likelihoods for each joint. This creates a natural representation for 3D pose and greatly improves performance over the direct regression of joint coordinates. Second, to further improve upon initial estimates, we employ a coarse-to-fine prediction scheme. This step addresses the large dimensionality increase and enables iterative refinement and repeated processing of the image features. The proposed approach outperforms all state-of-the-art methods on standard benchmarks achieving a relative error reduction greater than 30% on average. Additionally, we investigate using our volumetric representation in a related architecture which is suboptimal compared to our end-to-end approach, but is of practical interest, since it enables training when no image with corresponding 3D groundtruth is available, and allows us to present compelling results for in-the-wild images.

cs.CV↗

arXiv2017

Harvesting Multiple Views for Marker-less 3D Human Pose Annotations

Recent advances with Convolutional Networks (ConvNets) have shifted the bottleneck for many computer vision tasks to annotated data collection. In this paper, we present a geometry-driven approach to automatically collect annotations for human pose prediction tasks. Starting from a generic ConvNet for 2D human pose, and assuming a multi-view setup, we describe an automatic way to collect accurate 3D human pose annotations. We capitalize on constraints offered by the 3D geometry of the camera setup and the 3D structure of the human body to probabilistically combine per view 2D ConvNet predictions into a globally optimal 3D pose. This 3D pose is used as the basis for harvesting annotations. The benefit of the annotations produced automatically with our approach is demonstrated in two challenging settings: (i) fine-tuning a generic ConvNet-based 2D pose predictor to capture the discriminative aspects of a subject's appearance (i.e.,"personalization"), and (ii) training a ConvNet from scratch for single view 3D human pose prediction without leveraging 3D pose groundtruth. The proposed multi-view pose estimator achieves state-of-the-art results on standard benchmarks, demonstrating the effectiveness of our method in exploiting the available multi-view information.

cs.CV↗

arXiv2017

6-DoF Object Pose from Semantic Keypoints

This paper presents a novel approach to estimating the continuous six degree of freedom (6-DoF) pose (3D translation and rotation) of an object from a single RGB image. The approach combines semantic keypoints predicted by a convolutional network (convnet) with a deformable shape model. Unlike prior work, we are agnostic to whether the object is textured or textureless, as the convnet learns the optimal representation from the available training image data. Furthermore, the approach can be applied to instance- and class-based pose recovery. Empirically, we show that the proposed approach can accurately recover the 6-DoF object pose for both instance- and class-based scenarios with a cluttered background. For class-based object pose estimation, state-of-the-art accuracy is shown on the large-scale PASCAL3D+ dataset.

cs.CV↗

arXiv2017

Sparse Representation for 3D Shape Estimation: A Convex Relaxation Approach

We investigate the problem of estimating the 3D shape of an object defined by a set of 3D landmarks, given their 2D correspondences in a single image. A successful approach to alleviating the reconstruction ambiguity is the 3D deformable shape model and a sparse representation is often used to capture complex shape variability. But the model inference is still a challenge due to the nonconvexity in optimization resulted from joint estimation of shape and viewpoint. In contrast to prior work that relies on a alternating scheme with solutions depending on initialization, we propose a convex approach to addressing this challenge and develop an efficient algorithm to solve the proposed convex program. Moreover, we propose a robust model to handle gross errors in the 2D correspondences. We demonstrate the exact recovery property of the proposed method, the advantage compared to the nonconvex baseline methods and the applicability to recover 3D human poses and car models from single images.

cs.CV↗

arXiv2016

Distributed Consistent Data Association

Data association is one of the fundamental problems in multi-sensor systems. Most current techniques rely on pairwise data associations which can be spurious even after the employment of outlier rejection schemes. Considering multiple pairwise associations at once significantly increases accuracy and leads to consistency. In this work, we propose two fully decentralized methods for consistent global data association from pairwise data associations. The first method is a consensus algorithm on the set of doubly stochastic matrices. The second method is a decentralization of the spectral method proposed by Pachauri et al.. We demonstrate the effectiveness of both methods using theoretical analysis and experimental evaluation.

cs.MA↗

arXiv2016

Sparseness Meets Deepness: 3D Human Pose Estimation from Monocular Video

This paper addresses the challenge of 3D full-body human pose estimation from a monocular image sequence. Here, two cases are considered: (i) the image locations of the human joints are provided and (ii) the image locations of joints are unknown. In the former case, a novel approach is introduced that integrates a sparsity-driven 3D geometric prior and temporal smoothness. In the latter case, the former case is extended by treating the image locations of the joints as latent variables. A deep fully convolutional network is trained to predict the uncertainty maps of the 2D joint locations. The 3D pose estimates are realized via an Expectation-Maximization algorithm over the entire sequence, where it is shown that the 2D joint location uncertainties can be conveniently marginalized out during inference. Empirical evaluation on the Human3.6M dataset shows that the proposed approaches achieve greater 3D pose estimation accuracy over state-of-the-art baselines. Further, the proposed approach outperforms a publicly available 2D pose estimation baseline on the challenging PennAction dataset.

cs.CV↗

arXiv2015

Multi-Image Matching via Fast Alternating Minimization

In this paper we propose a global optimization-based approach to jointly matching a set of images. The estimated correspondences simultaneously maximize pairwise feature affinities and cycle consistency across multiple images. Unlike previous convex methods relying on semidefinite programming, we formulate the problem as a low-rank matrix recovery problem and show that the desired semidefiniteness of a solution can be spontaneously fulfilled. The low-rank formulation enables us to derive a fast alternating minimization algorithm in order to handle practical problems with thousands of features. Both simulation and real experiments demonstrate that the proposed algorithm can achieve a competitive performance with an order of magnitude speedup compared to the state-of-the-art algorithm. In the end, we demonstrate the applicability of the proposed method to match the images of different object instances and as a result the potential to reconstruct category-specific object models from those images.

cs.CV↗

arXiv2015

3D Shape Estimation from 2D Landmarks: A Convex Relaxation Approach

We investigate the problem of estimating the 3D shape of an object, given a set of 2D landmarks in a single image. To alleviate the reconstruction ambiguity, a widely-used approach is to confine the unknown 3D shape within a shape space built upon existing shapes. While this approach has proven to be successful in various applications, a challenging issue remains, i.e., the joint estimation of shape parameters and camera-pose parameters requires to solve a nonconvex optimization problem. The existing methods often adopt an alternating minimization scheme to locally update the parameters, and consequently the solution is sensitive to initialization. In this paper, we propose a convex formulation to address this problem and develop an efficient algorithm to solve the proposed convex program. We demonstrate the exact recovery property of the proposed method, its merits compared to alternative methods, and the applicability in human pose and car shape estimation.

cs.CV↗

arXiv2015

Pose and Shape Estimation with Discriminatively Learned Parts

We introduce a new approach for estimating the 3D pose and the 3D shape of an object from a single image. Given a training set of view exemplars, we learn and select appearance-based discriminative parts which are mapped onto the 3D model from the training set through a facil- ity location optimization. The training set of 3D models is summarized into a sparse set of shapes from which we can generalize by linear combination. Given a test picture, we detect hypotheses for each part. The main challenge is to select from these hypotheses and compute the 3D pose and shape coefficients at the same time. To achieve this, we optimize a function that minimizes simultaneously the geometric reprojection error as well as the appearance matching of the parts. We apply the alternating direction method of multipliers (ADMM) to minimize the resulting convex function. We evaluate our approach on the Fine Grained 3D Car dataset with superior performance in shape and pose errors. Our main and novel contribution is the simultaneous solution for part localization, 3D pose and shape by maximizing both geometric and appearance compatibility.

cs.CV↗