arXiv subjects

Xiaoyan Ma

Publications and source records attributed to Xiaoyan Ma.

At least 19 recordsLinked to original sources

arXiv2026

Optimal Multi-RIS Placement: Coverage-Guaranteed Sum Rate Maximization Under Inhomogeneous User Distributions

Reconfigurable Intelligent Surface (RIS) has emerged as a promising next-generation technology that improves the throughput and coverage of a wireless system. The realization of the full potential of RISs in a wireless system is tied to their strategic spatial deployment. While existing literature on RIS placement primarily focuses on maximizing coverage, when multiple RIS placements guarantee the required coverage (happens quite often), these approaches fail to exploit prior user trends to choose the one that is most probable to maximize throughput. Thus, to enable throughput maximization while guaranteeing fairness, we formulate a novel hierarchical problem that maximizes the expected sum rate of the system while guaranteeing a certain probabilistic coverage, with the requisite minimum number of RISs deployed. To solve this multi-layered non-convex problem, firstly, we obtain a set of optimal points where we can deploy RISs to provide the coverage guarantee. Then, the least number of RISs that can guarantee the required coverage is obtained by a greedy minimum partitioning. Finally, a Bayesian optimization based approach is used to compute the optimal RIS placement. Numerical results are provided to show that the proposed framework consistently identifies placements that jointly achieve good coverage and throughput, without impractical assumptions.

eess.SP↗

arXiv2026

Multi-Hop RIS ISAC for Target Positioning: A Tensor Decomposition-based Approach

Reconfigurable intelligent surface (RIS) has demon- strated remarkable potential to enhance the performance of integrated sensing and communication (ISAC), particularly when the line-of-sight (LoS) paths are obstructed. By controlling the reconfigurable elements on the surface, RIS can establish virtual LoS paths and provide considerable passive beamforming gains, thereby significantly improving the received signal quality. In this paper, we design a novel multi-hop RIS ISAC system for target positioning, where multiple RISs are deployed to assist the communication from a transmitter to associated users while simultaneously enhancing receiver sensing performance in target positioning. Specifically, we formulate an optimization problem to minimize the root mean square error (RMSE) of the target detection while guaranteeing the communication requirements of the users. To solve this problem, we first unfold the cascaded sens- ing channel through parallel factor decomposition, and develop a low-rank CANDECOMP/PARAFAC decomposition (CPD)-based scheme to extract the location parameters (i.e., angle of arrival, angle of departure and delay) of the sensing targets. Then, we develop a scheme for jointly selecting the transmit beamforming and RIS phase shift configurations to maximize the sensing energy at the receiver, which in turn leads to improved accuracy in target positioning. We also provide a uniqueness analysis, complexity analysis, and Cramér-Rao lower bound (CRLB) of the parameters estimated by our methodology. Simulation results validate the improvement in target positioning obtained by our design relative to baselines.

eess.SP↗

arXiv2026

Transmit Coefficients and Receive Combining Vector Design for OTA-FL with Imperfect CSI

Over-the-air (OTA) computation has recently gained significant attentions as an effective approach to enhance the communication efficiency of wireless federated learning (FL). By enabling simultaneous transmission and aggregation of local model updates, OTA-FL can substantially reduce both latency and bandwidth consumption. However, a key challenge lies in the imperfect aggregation of global models caused by channel state information (CSI) uncertainty, which introduces distortion to the final learning performance. To address this issue, we study the long-term mean squared error (MSE) minimization problem for OTA-FL under imperfect CSI conditions. Through convergence analysis, we establish an upper bound for the time-averaged MSE, thereby revealing the effect of aggregation errors accumulated throughout multiple communication rounds on the overall training performances. Based on this analysis, an optimization framework is developed to minimize the long-term MSE via the joint design of (i) transmit coefficients at the local devices and (ii) receive combining vectors at the parameter server (PS). Since this alternating optimization approach requires non-causal CSI, a Lyapunov-based optimization method is further introduced to handle causal CSI scenarios. By incorporating virtual queues to characterize long-term energy consumption, the proposed method effectively decouples temporal dependencies and allows transmit coefficients to be optimized based on the causal CSI of each aggregation round. Comprehensive evaluations on Fashion-MNIST, CIFAR-10 and CIFAR-100 datasets have demonstrated that the proposed algorithms can significantly reduce the degradation of test accuracy caused by imperfect CSI. Comparisons with other benchmark schemes further verify the superiority of our proposed algorithms.

cs.IT↗

arXiv2026

AISAC: Closing the Loop Between AI and Integrated Sensing and Communication for 6G

Integrated sensing and communication (ISAC) and AI-and-communication (AIAC) are identified as separate usage scenarios in the ITU IMT-2030 vision for sixth-generation (6G) networks. In practice, however, these two directions are already beginning to merge. ISAC gives the network a way to observe the physical world, while AI gives the network a way to learn from those observations and act on them. This article introduces AI-integrated sensing and communication (AISAC) as a closed-loop framework for this merger. In AISAC, AI is not only a tool used to optimize an ISAC system. ISAC is also the physical substrate through which AI receives data, context, and connectivity. The key technical message is that AISAC requires a new physical-layer design principle, in which the ISAC waveform, beam, power, bandwidth, and sensing mode should be configured for learning alignment, not for sensing distortion or communication rate alone. In particular, the sensing configuration that is most accurate from a classical estimation viewpoint need not be the one that is most useful for training or inference. We present the AISAC landscape, explain why imperfect sensing changes the learning problem, develop the closed-loop architecture and its three-way sensing-communication-learning tension, and outline a vehicular edge-intelligence use case together with open problems for theory, implementation, and standardization.

cs.IT↗

arXiv2026

Detecting and Mitigating Backdoor Attacks in OTA-FL Systems: A Two-Stage Robust Aggregation Scheme

Over-the-air federated learning (OTA-FL) improves communication efficiency by exploiting the superposition property of wireless channels, but this same property also creates a critical security vulnerability: the parameter server (PS) cannot access individual local updates, making it difficult to identify and exclude poisoned gradients. The challenge is further exacerbated under non-independent and identically distributed (Non-IID) training data, where benign gradient drift can closely resemble malicious updates. In this paper, we propose a two-stage robust aggregation framework for defending against backdoor attacks in OTA-FL. Under our scheme, each client is first assigned a modality-aware multi-indicator trust score, where the specific indicators are selected according to the data modality (e.g., waveform, text, image) and model architecture to capture the most discriminative footprint of backdoor updates. Based on this score, the PS then performs trust-based multiple access (TBMA) to separate clients into trusted, suspicious, and malicious categories. Suspicious clients are further examined through PS-side layer-wise inspection and a longitudinal reputation mechanism. Experimental results on several datasets demonstrate that the proposed methodology effectively suppresses stealthy backdoor attacks, including bounded-scaling attacks, Euclidean-constrained attacks, Cosine-constrained attacks, and Neurotoxin, while maintaining competitive main-task accuracy.

cs.CR↗

arXiv2026

Sub-spin-flop switching of a fully compensated antiferromagnet by magnetic field

The control of antiferromagnets by magnetic fields represents a fundamental challenge in condensed matter physics, owing to their fully compensated magnetic order and vanishing net magnetization. Conventional methods rely on either uncompensated moments or high-field spin-flop transitions. Here, we demonstrate low-field switching in the fully compensated antiferromagnet CeNiAsO -- a material recently proposed as a candidate for $p$-wave magnetism. Using an in-plane magnetic field well below the spin-flop threshold, we selectively stabilize one of two degenerate antiferromagnetic domains with mutually orthogonal sublattice orientations. This field-induced domain selection allows reversible and nonvolatile switching of a giant in-plane resistivity anisotropy up to $\sim35\,\%$ -- a magnitude that far exceeds conventional anisotropy signals driven by spin-orbit coupling. The switching behavior persists across both the low-temperature noncollinear Néel phase and the higher-temperature collinear spin-density-wave phase, highlighting the universality of the domain-selection mechanism. Our work establishes a practical approach for manipulating compensated antiferromagnets with modest magnetic fields and underscores their potential for high-performance spintronic devices based on giant and switchable resistivity anisotropy.

cond-mat.mes-hall↗

arXiv2026

Realistic Detector Geometry Modeling and Its Impact on Event Reconstruction in JUNO

JUNO is designed to determine the neutrino mass ordering with an energy resolution of 3% at 1 MeV. In the real detector, however, deformations of the central stainless-steel structure during installation lead to deviations of the photomultiplier tube (PMT) positions from their design values. Based on the limited survey data of the PMTs and the stainless-steel truss, we perform a correlation analysis of the measured points and propose a method to predict the positions of all PMTs. Using the resulting realistic geometry, we demonstrate that the detector deformation has a negligible effect on the energy reconstruction. In contrast, inaccuracies in the assumed geometry can introduce vertex biases of up to 40 mm. Incorporating the realistic geometry into the calibration-based PMT response model removes this bias and preserves the stability of the reconstruction algorithms.

physics.ins-det↗

arXiv2026

Optimal RIS Placement in Multi-User MISO Systems with User Randomness

It is well established that the performance of reconfigurable intelligent surface (RIS)-assisted systems critically depends on the optimal placement of the RIS. Previous works consider either simple coverage maximization or simultaneous optimization of the placement of the RIS along with the beamforming and reflection coefficients, most of which assume that the location of the RIS, base station (BS), and users are known. However, in practice, only the spatial variation of user density and obstacle configuration are likely to be known prior to deployment of the system. Thus, we formulate a non-convex problem that optimizes the position of the RIS over the expected minimum signal-to-interference-plus-noise ratio (SINR) of the system with user randomness, assuming that the system employs joint beamforming after deployment. To solve this problem, we propose a recursive coarse-to-fine methodology that constructs a set of candidate locations for RIS placement based on the obstacle configuration and evaluates them over multiple instantiations from the user distribution. The search is recursively refined within the optimal region identified in each stage to determine the final optimal region for RIS deployment. Detailed numerical results are presented to corroborate our findings.

eess.SP↗

arXiv2025

Liquid Handling of the JUNO Experiment

The Filling, Overflow, and Circulation (FOC) system is a critical subsystem of the Jiangmen Underground Neutrino Observatory (JUNO), responsible for the safe handling of the Liquid Scintillator (LS) and water throughout the detector's commissioning and operational lifetime. This paper details the design and operation of the FOC system, which accomplished the filling of the world's largest LS detector--taking 45 days for water (6.4*10^4 m^3) and 200 days for LS (2.3*10^4 m^3). Throughout water filling, the liquid level difference between the Central Detector and Water Pool was rigorously maintained within safety limits. During LS filling, level control achieved +/-2 cm precision with flow regulation within +/-0.5% of setpoints. An automated control system based on Programmable Logic Controllers and the Experimental Physics and Industrial Control System framework ensured reliable operation. The system preserved LS radiopurity, maintaining 222Rn below 1 mBq/m^3 during filling and achieving 238U/232Th concentrations below 10^-16 g/g. The successful commissioning and operation of the FOC system have established it as an indispensable foundation for the stable long-term operation of the JUNO detector.

physics.ins-det↗

arXiv2025

JUNO 20-inch PMT and electronics system characterization using large pulses of PMT dark counts at the Pan-Asia testing platform

The main goal of the JUNO experiment is to determine the neutrino mass ordering with a 20kt liquid-scintillator detector. The 20-inch PMT and its 1F3 (one for three) electronics are crucial to realize the excellent energy resolution of at least 3% at 1MeV. The knowledge on the PMT and 1F3 electronics response is critical for detector performance understanding. A study of the JUNO 20-inch PMT and 1F3 electronics system characterization is presented using large pulses of PMT dark count at the Pan-Asia testing platform in China. Thanks to its broad amplitude range and high rate, the large pulse signals are also used to investigate the PMT after pulse response.

physics.ins-det↗

arXiv2025

Error Analysis for Over-the-Air Federated Learning under Misaligned and Time-Varying Channels

This paper investigates an OFDM-based over-the-air federated learning (OTA-FL) system, where multiple mobile devices, e.g., unmanned aerial vehicles (UAVs), transmit local machine learning (ML) models to a central parameter server (PS) for global model aggregation. The high mobility of local devices results in imperfect channel estimation, leading to a misalignment problem, i.e., the model parameters transmitted from different local devices do not arrive at the central PS simultaneously. Moreover, the mobility introduces time-varying uploading channels, which further complicates the aggregation process. All these factors collectively cause distortions in the OTA-FL training process which are underexplored. To quantify these effects, we first derive a closed-form expression for a single-round global model update in terms of these channel imperfections. We then extend our analysis to capture multiple rounds of global updates, yielding a bound on the accumulated error in OTA-FL. We validate our theoretical results via extensive numerical simulations, which corroborate our derived analysis.

eess.SP↗

arXiv2025

Crystalline electric field excitations in Weyl semimetal \textit{R}AlSi (\textit{R} = Ce, Pr and Nd)

The rare earth intermetallic system \textit{R}Al\textit{X} (\textit{R} = rare earth elements, \textit{X} = Si and Ge) is known to be a promising candidate of magnetic Weyl semimetal. Due to the complex interactions between the rare earth elements and surrounding atoms, as well as hybridization with itinerant electrons, this family likely possesses highly intriguing and novel magnetic structures and thus exhibits dynamic behaviors. We systematically probe polycrystalline samples of \textit{R}AlSi (\textit{R} = La, Ce, Pr and Nd) combining inelastic neutron scattering (INS), heat capacity and magnetic susceptibility measurements. The INS measurements identify well-resolved crystalline electric field (CEF) excitations at 19.2 and 24.9 meV in CeAlSi, at 5.4 meV in PrAlSi, and at 2.5 and 4.2 meV in NdAlSi. We analyzed the INS data using the corresponding CEF models and determined the CEF parameters and ground state wave functions of \textit{R}AlSi (\textit{R} = Ce, Pr and Nd). Our results suggest strong single-ion anisotropy in their ground states: $|\pm3/2\rangle$ (94.5\%) in CeAlSi, $|\pm3\rangle$ (99.2\%) in PrAlSi, and $|\pm9/2\rangle$ (76.2\%) in NdAlSi. Notably, the weaker anisotropy and strong exchange interactions in NdAlSi promote competing magnetic orders and CEF splitting at low temperature, contrasting with the robust CEF levels in magnetic states of CeAlSi and PrAlSi.

cond-mat.str-el↗

arXiv2025

Robust Beamforming Design for STAR-RIS Aided RSMA Network with Hardware Impairments

In this article, we investigate the robust beamforming design for a simultaneous transmitting and reflecting reconfigurable intelligent surface (STAR-RIS) aided downlink rate-splitting multiple access (RSMA) communication system, where both transceivers and STAR-RIS suffer from the impact of hardware impairments (HWI).A base station (BS) is deployed to transmit messages concurrently to multiple users, utilizing a STAR-RIS to improve communication quality and expand user coverage. We aim to maximize the achievable sum rate of the users while ensuring the constraints of transmit power, STAR-RIS coefficients, and the actual rate of the common stream for all users. To solve this challenging high-coupling and non-convexity problem, we adopt a fractional programming (FP)-based alternating optimization (AO) approach, where each sub-problem is addressed via successive convex approximation (SCA) and penalty function (PF) methods. Numerical results demonstrate that the proposed scheme outperforms other multiple access schemes and conventional passive RIS in terms of the achievable sum rate. Additionally, considering the HWI of the transceiver and STAR-RIS makes our algorithm more robust than when such considerations are not included.

eess.SP↗

arXiv2025

Heterogeneous Skeleton-Based Action Representation Learning

Skeleton-based human action recognition has received widespread attention in recent years due to its diverse range of application scenarios. Due to the different sources of human skeletons, skeleton data naturally exhibit heterogeneity. The previous works, however, overlook the heterogeneity of human skeletons and solely construct models tailored for homogeneous skeletons. This work addresses the challenge of heterogeneous skeleton-based action representation learning, specifically focusing on processing skeleton data that varies in joint dimensions and topological structures. The proposed framework comprises two primary components: heterogeneous skeleton processing and unified representation learning. The former first converts two-dimensional skeleton data into three-dimensional skeleton via an auxiliary network, and then constructs a prompted unified skeleton using skeleton-specific prompts. We also design an additional modality named semantic motion encoding to harness the semantic information within skeletons. The latter module learns a unified action representation using a shared backbone network that processes different heterogeneous skeletons. Extensive experiments on the NTU-60, NTU-120, and PKU-MMD II datasets demonstrate the effectiveness of our method in various tasks of action understanding. Our approach can be applied to action recognition in robots with different humanoid structures.

cs.CV↗

arXiv2025

Joint Precoder and Reflector Design for RIS-assisted Multi-user OAM Communication Systems

Orbital angular momentum (OAM) can enhance the spectral efficiency by multiplying a set of orthogonal modes on the same frequency channel. To maintain the orthogonal among different OAM modes, perfect alignments between transmitters and receivers are strictly required. However, in multi-user OAM communications, the perfect alignments between the transmitter and all the receivers are impossible. The phase turbulence, caused by misaligned transmitters and receivers, leads to serious inter-mode interference, which greatly degrades the capacity of OAM transmissions. To eliminate the negative effects of phase turbulence and further enhance the transmission capacity, we introduce RIS into the system, and propose a joint precoder and reflector design for reconfigurable intelligent surface (RIS)-assisted multi-user OAM communication systems. Specifically, we propose a three-layer design at the transmitter side, which includes inter-user OAM mode interference cancellation, inter-mode self-interference elimination and the power allocation among different users. By analyzing the characteristics of the overall channels, we are able to give the specific expressions of the precoder designs, which significantly reduce the optimization complexity. We further leverage RIS to guarantee the line-ofsight (LoS) transmissions between the transmitter and users for better sum rate performance. To verify the superiority of the proposed multi-user OAM transmission system, we compare it with traditional MIMO transmission schemes, numerical results have shown that our proposed design can achieve better sum rate performance due to the well-designed orthogonality among different users and OAM modes.

eess.SP↗

arXiv2025

Preformed Cooper Pairs in a Triclinic Iron Pnictide Superconductor

Electron pairing along with phase coherence generates superconductivity below the critical temperature ($T_c$). In underdoped high-$T_c$ cuprates, these two quantum phenomena may occur at separate temperatures, which was lately confirmed in the quasi-two-dimensional (quasi-2D) iron chalcogenide superconductors. Here, we report a systematic investigation on the pre-pairing behavior in a triclinic iron pnictide superconductor (Ca$_{0.85}$La$_{0.15}$)$_{10}$(Pt$_3$As$_8$)(Fe$_2$As$_2$)$_5$ with $T_c \approx $ 30 K, where the superconductivity is quasi-2D manifested by the Berezinskii-Kosterlitz-Thouless behaviors. Inelastic neutron scattering experiments unambiguously reveal a spin resonance peak around $E_R =$ 13 meV in the superconducting state, but its intensity continuously decreases when warming up across $T_c$, accompanied with an anomaly around $T^{*}\approx$ 45 K in spin correlations, and a suppression by an in-plane magnetic field persisting to the same temperature. Below $T^{*}$, a significant Nernst signal and a reduction of density of states at the Fermi level are also observed. These results suggest that the precursor of spin resonance is highly related to the preformed Cooper pairs driven by phase fluctuations, much like the pseudogap case in cuprates.

cond-mat.supr-con↗

arXiv2024

Experimental Study of RCS Diversity with Novel No-divergent OAM Beams

This research proposes a novel approach utilizing Orbital Angular Momentum (OAM) beams to enhance Radar Cross Section (RCS) diversity for target detection in future transportation systems. Unlike conventional OAM beams with hollow-shaped divergence patterns, the new proposed OAM beams provide uniform illumination across the target without a central energy void, but keep the inherent phase gradient of vortex property. We utilize waveguide slot antennas to generate four different modes of these novel OAM beams at X-band frequency. Furthermore, these different mode OAM beams are used to illuminate metal models, and the resulting RCS is compared with that obtained using plane waves. The findings reveal that the novel OAM beams produce significant azimuthal RCS diversity, providing a new approach for the detection of weak and small targets.This study not only reveals the RCS diversity phenomenon based on novel OAM beams of different modes but also addresses the issue of energy divergence that hinders traditional OAM beams in long-range detection applications.

eess.SP↗

arXiv2024

Near-Orthogonal Overlay Communications in LoS Channel Enabled by Novel OAM Beams without Central Energy Voids: An Experimental Study

This paper introduces a groundbreaking Line-of-Sight (LoS) Multiple-Input Multiple-Output (MIMO) communication architecture leveraging non-traditional Orbital Angular Momentum (OAM) beams. Challenging the conventional paradigm of hollow-emitting OAM beams, this study presents an innovative OAM transmitter design that produces directional OAM beams without central energy voids, aligning their radiation patterns with those of conventional planar wave horn antennas. Within the main lobe of these antennas, the phase variation characteristics inherent to OAM beams are ingeniously maintained, linking different OAM modes to the linear wavefront variation gradients, thereby reducing channel correlation in LoS scenarios and significantly augmenting the channel capacity of LoS-MIMO frameworks. Empirical validations conducted through a meticulously designed LoS-MIMO experimental platform reveal significant improvements in channel correlation coefficients, communication stability, and Bit Error Rate (BER) compared to systems utilizing traditional planar wave antennas. The experiment results underscore the potential of the novel OAM-based system to improve current LoS-MIMO communication protocols, and offer both academic and engineering guidance for the construction of practical communication infrastructures. Beyond its immediate contributions, this paper underscores a pivotal shift in the field of communications, pointing out that traditional communication algorithms have primarily focused on baseband signal processing while often overlooking the electromagnetic characteristics of the physical world.

eess.SP↗