Searcharxiv⌕ Search

arXiv subjects

Xingyu Zhang

Publications and source records attributed to Xingyu Zhang.

At least 91 records · Page 5Linked to original sources
arXiv2019

Weak ferromagnetic insulator with huge coercivity in monoclinic double perovskite La2CuIrO6

Insulating ferromagnets with high TC are required for many new magnetic devices. More complexity arises when strongly correlated 3d ions coexist with strongly spin-orbit coupled 5d ones in a double perovskite. Here, we perform the structural, magnetic, and density functional theory study of such double perovskite La2CuIrO6. A new P21/n polymorph is found according to the comprehensive analysis of x-ray, Raman scattering and phonon spectrum. The magnetization reveals a weak ferromagnetic (FM) transition at TC = 62 K and short range FM order in higher temperature range. A huge coercivity is found as high as HC~11.96 kOe at 10K, which in combination with the negative trapped field results in the magnetization reversal in the zero field cooling measurement. The first principle calculations confirm the observed FM state and suggest La2CuIrO6 of this polymorph is a Mott insulating ferromagnet assisted by the spin-orbit coupling.

cond-mat.str-el↗
arXiv2019

Finite response time in stripe formation by bacteria with density-suppressed motility

Genetically engineered bacteria to increase the tumbling frequency of the run-and-tumble motion for the higher local bacterial density form visible stripe pattern composed of successive high and low density regions on an agar plate. We propose a model that includes a simplified regulatory dynamics of the tumbling frequency in individual cells to clarify the role of finite response time. We show that the time-delay due to the response dynamics results in the instability in a homogeneous steady state allowing a pattern formation. For further understanding, we propose a simplified two-state model that allows us to describe the response time dependence of the instability analytically. We show that the instability occurs at long wave length as long as the response time is comparable with the tumbling timescale and the non-linearity of the response function to the change of the density is high enough. The minimum system size to see the instability grows with the response time $τ$, proportional to $\sqrtτ$ in the large delay limit.

q-bio.CB↗
arXiv2018

Popular Matchings and Limits to Tractability

We consider popular matching problems in both bipartite and non-bipartite graphs with strict preference lists. It is known that every stable matching is a min-size popular matching. A subclass of max-size popular matchings called dominant matchings has been well-studied in bipartite graphs: they always exist and there is a simple linear time algorithm to find one. We show that stable and dominant matchings are the only two tractable subclasses of popular matchings in bipartite graphs; more precisely, we show that it is NP-complete to decide if $G$ admits a popular matching that is neither stable nor dominant. We also show a number of related hardness results, such as (tight) inapproximability of the maximum weight popular matching problem. In non-bipartite graphs, we show a strong negative result: it is NP-hard to decide whether a popular matching exists or not, and the same result holds if we replace popular with dominant. On the positive side, we show the following results in any graph: - we identify a subclass of dominant matchings called strongly dominant matchings and show a linear time algorithm to decide if a strongly dominant matching exists or not; - we show an efficient algorithm to compute a popular matching of minimum cost in a graph with edge costs and bounded treewidth.

cs.DM↗
arXiv2018

Two-sided popular matchings in bipartite graphs with forbidden/forced elements and weights

Two-sided popular matchings in bipartite graphs are a well-known generalization of stable matchings in the marriage setting, and they are especially relevant when preference lists are incomplete. In this case, the cardinality of a stable matching can be as small as half the size of a maximum matching. Popular matchings allow for assignments of larger size while still guaranteeing a certain fairness condition. In fact, stable matchings are popular matchings of minimum size, and a maximum size popular matching can be as large as twice the size of a(ny) stable matching in a given instance. The structure of popular matchings seems to be more complex, and currently less understood, than that of stable matchings. In this paper, we focus on three optimization problems related to popular matchings. First, we give a granular analysis of the complexity of popular matching with forbidden and forced elements problems, thus complementing results from [Cseh and Kavitha, 2016]. In particular, we show that deciding whether there exists a popular matching with (or without) two given edges is NP-Hard. This implies that finding a popular matching of maximum (resp. minimum) weight is NP-Hard and, even if all weights are nonnegative, inapproximable up to a factor 1/2 (resp. up to any factor). A decomposition theorem from [Cseh and Kavitha, 2016] can be employed to give a 1/2 approximation to the maximum weighted popular matching problem with nonnegative weights, thus completely settling the complexity of those problems.

cs.DM↗
arXiv2017

Analytical derivation of the radial distribution function in spherical dark matter halos

The velocity distribution of dark matter near the Earth is important for an accurate analysis of the signals in terrestrial detectors. This distribution is typically extracted from numerical simulations. Here we address the possibility of deriving the velocity distribution function analytically. We derive a differential equation which is a function of radius and the radial component of the velocity. Under various assumptions this can be solved, and we compare the solution with the results from controlled numerical simulations. Our findings complement the previously derived tangential velocity distribution. We hereby demonstrate that the entire distribution function, below 0.7 v_esc, can be derived analytically for spherical and equilibrated dark matter structures.

astro-ph.GA↗
arXiv2016

Minimal scalings and structural properties of scalable frames

For a unit-norm frame $F = \{f_i\}_{i=1}^k$ in $\R^n$, a scaling is a vector $c=(c(1),\dots,c(k))\in \R_{\geq 0}^k$ such that $\{\sqrt{c(i)}f_i\}_{i =1}^k$ is a Parseval frame in $\R^n$. If such a scaling exists, $F$ is said to be scalable. A scaling $c$ is a minimal scaling if $\{f_i : c(i)>0\}$ has no proper scalable subframe. It is known that the set of all scalings of $F$ is a convex polytope whose vertices correspond to minimal scalings. In this paper, we provide an estimation of the number of minimal scalings of a scalable frame and a characterization of when minimal scalings are affinely dependent. Using this characterization, we can conclude that all strict scalings $c=(c(1),\dots,c(k))\in \R_{> 0}^k$ of $F$ have the same structural property. We also present the uniqueness of orthogonal partitioning property of any set of minimal scalings, which provides all possible tight subframes of a given scaled frame.

math.FA↗
arXiv2016

Selective Purcell enhancement of two closely linked zero-phonon transitions of a silicon carbide color center

Point defects in silicon carbide are rapidly becoming a platform of great interest for single photon generation, quantum sensing, and quantum information science. Photonic crystal cavities (PCC) can serve as an efficient light-matter interface both to augment the defect emission and to aid in studying the defects' properties. In this work, we fabricate 1D nanobeam PCCs in 4H-silicon carbide with embedded silicon vacancy centers. These cavities are used to achieve Purcell enhancement of two closely spaced defect zero-phonon lines (ZPL). Enhancements of >80-fold are measured using multiple techniques. Additionally, the nature of the cavity coupling to the different ZPLs is examined.

cond-mat.mes-hall↗
arXiv2016

Design of a plasmonic-organic hybrid slot waveguide integrated with a bowtie-antenna for terahertz wave detection

Electromagnetic (EM) wave detection over a large spectrum has recently attracted significant amount of attention. Traditional electronic EM wave sensors use large metallic probes which distort the field to be measured and also have strict limitations on the detectable RF bandwidth. To address these problems, integrated photonic EM wave sensors have been developed to provide high sensitivity and broad bandwidth. Previously we demonstrated a compact, broadband, and sensitive integrated photonic EM wave sensor, consisting of an organic electro-optic (EO) polymer refilled silicon slot photonic crystal waveguide (PCW) modulator integrated with a gold bowtie antenna, to detect the X band of the electromagnetic spectrum. However, due to the relative large RC constant of the silicon PCW, such EM wave sensors can only work up to tens of GHz. In this work, we present a detailed design and discussion of a new generation of EM wave sensors based on EO polymer refilled plasmonic slot waveguides in conjunction with bowtie antennas to cover a wider electromagnetic spectrum from 1 GHz up to 10THz, including the range of microwave, millimeter wave and even terahertz waves. This antenna-coupled plasmonic-organic hybrid (POH) structure is designed to provide an ultra-small RC constant, a large overlap between plasmonic mode and RF field, and strong electric field enhancement, as well as negligible field perturbation. A taper is designed to bridge silicon strip waveguide to plasmonic slot waveguide. Simulation results show that our device can have an EM wave sensing ability up to 10 THz. To the best of our knowledge, this is the first POH device for photonic terahertz wave detection.

physics.optics↗
arXiv2016

Ultra-compact and wide-spectrum-range thermo-optic switch based on silicon coupled photonic crystal microcavities

We design, fabricate, and experimentally demonstrate a compact thermo-optic gate switch comprising a 3.78 um-long coupled L0-type photonic crystalmicrocavities on a silicon-on-insulator substrate. A nanohole is inserted in the center of each individual L0 photonic crystalmicrocavity. Coupling between identical microcavities gives rise to bonding and anti-bonding states of the coupled photonic molecules. The coupled photonic crystalmicrocavities are numerically simulated and experimentally verified with a 6 nm-wide flat-bottom resonance in its transmission spectrum, which enables wider operational spectrum range than microring resonators. An integrated micro-heater is in direct contact with the silicon core to efficiently drive the device. The thermo-optic switch is measured with an optical extinction ratio of 20 dB, an on-off switching power of 18.2 mW, a thermo-optic tuning efficiency of 0.63 nm/mW, a rise time of 14.8 us, and a fall time of 18.5 us. The measured on-chip loss on the transmission band is as low as 1 dB.

physics.optics↗
arXiv2016

Integrated Broadband Bowtie Antenna on Transparent Silica Substrate

The bowtie antenna is a topic of growing interest in recent years. In this paper, we design, fabricate, and characterize a modified gold bowtie antenna integrated on a transparent silica substrate. The bowtie antenna is designed with broad RF bandwidth to cover the X-band in the electromagnetic spectrum. We numerically investigate the antenna characteristics, specifically its resonant frequency and enhancement factor. Our designed bowtie antenna provides a strong broadband electric field enhancement in its feed gap. Taking advantage of the low-k silica substrate, high enhancement factor can be achieved without the unwanted reflection and scattering from the backside silicon handle which is the issue of using an SOI substrate. We simulate the dependence of resonance frequency on bowtie geometry, and verify the simulation results through experimental investigation, by fabricating different sets of bowtie antennas on silica substrates and then measuring their resonance frequencies. In addition, the far-field radiation pattern of the bowtie antenna is measured, and it shows dipole-like characteristics with large beam width. Such a broadband antenna will be useful for a myriad of applications, ranging from photonic electromagnetic wave sensing to wireless communications.

physics.optics↗
arXiv2015

Design of Highly Efficient Hybrid Si-Au Taper for Dielectric Strip Waveguide to Plasmonic Slot Waveguide Mode Converter

In this paper, we design a dielectric-to-plasmonic slot waveguide mode converter based on the hybrid silicon-gold taper. The effects of mode matching, the effective index matching, and the metallic absorption loss on the conversion efficiency are studied. Consequently, a metallic taper-funnel coupler with an overall length of 1.7um is designed to achieve a very high conversion efficiency of 93.3% at 1550 nm. The configuration limitations for not allowing this mode converter to achieve a 100% conversion efficiency are also investigated. Such a high-efficiency converter can provide practical routes to realize ultracompact integrated circuits.

physics.optics↗
arXiv2015

Low-loss mode converter for coupling light into slotted photonic crystal waveguide

We design, fabricate and experimentally demonstrate a highly efficient adiabatic mode converter for coupling light into a silicon slot waveguide with a slot width as large as 320nm. This strip-to-slot mode converter is optimized to provide a measured insertion loss as low as 0.08dB. Our mode converter provides 0.1dB lower loss compared to a conventional V-shape mode converter. This mode converter is used to couple light into and out of a 320nm slot photonic crystal waveguide, and it is experimentally shown to improve the coupling efficiency up to 3.5dB compared to the V-shape mode converter, over the slow-light wavelength region.

physics.optics↗
arXiv2015

Antenna-coupled silicon-organic hybrid integrated photonic crystal modulator for broadband electromagnetic wave detection

In this work, we design, fabricate and characterize a compact, broadband and highly sensitive integrated photonic electromagnetic field sensor based on a silicon-organic hybrid modulator driven by a bowtie antenna. The large electro-optic (EO) coefficient of organic polymer, the slow-light effects in the silicon slot photonic crystal waveguide (PCW), and the broadband field enhancement provided by the bowtie antenna, are all combined to enhance the interaction of microwaves and optical waves, enabling a high EO modulation efficiency and thus a high sensitivity. The modulator is experimentally demonstrated with a record-high effective in-device EO modulation efficiency of r33=1230pm/V. Modulation response up to 40GHz is measured, with a 3-dB bandwidth of 11GHz. The slot PCW has an interaction length of 300um, and the bowtie antenna has an area smaller than 1cm2. The bowtie antenna in the device is experimentally demonstrated to have a broadband characteristics with a central resonance frequency of 10GHz, as well as a large beam width which enables the detection of electromagnetic waves from a large range of incident angles. The sensor is experimentally demonstrated with a minimum detectable electromagnetic power density of 8.4mW/m2 at 8.4GHz, corresponding to a minimum detectable electric field of 2.5V/m and an ultra-high sensitivity of 0.000027V/m Hz^-1/2 ever demonstrated. To the best of our knowledge, this is the first silicon-organic hybrid device and also the first PCW device used for the photonic detection of electromagnetic waves. Finally, we propose some future work, including a Teraherz wave sensor based on antenna-coupled electro-optic polymer filled plasmonic slot waveguide, as well as a fully packaged and tailgated device.

physics.optics↗
arXiv2015

Integrated broadband bowtie antenna on transparent substrate

The bowtie antenna is a topic of growing interest in recent years. In this paper, we design, fabricate, and characterize a modified gold bowtie antenna integrated on a transparent glass substrate. We numerically investigate the antenna characteristics, specifically its resonant frequency and enhancement factor. We simulate the dependence of resonance frequency on bowtie geometry, and verify the simulation results through experimental investigation, by fabricating different sets of bowtie antennas on glass substrates utilizing CMOS compatible processes and measuring their resonance frequencies. Our designed bowtie antenna provides a strong broadband electric field enhancement in its feed gap. The far-field radiation pattern of the bowtie antenna is measured, and it shows dipole-like characteristics with large beam width. Such a broadband antenna will be useful for a myriad of applications, ranging from wireless communications to electromagnetic wave detection.

physics.optics↗
arXiv2015

Broadband energy-efficient optical modulation by hybrid integration of silicon nanophotonics and organic electro-optic polymer

Silicon-organic hybrid integrated devices have emerging applications ranging from high-speed optical interconnects to photonic electromagnetic-field sensors. Silicon slot photonic crystal waveguides (PCWs) filled with electro-optic (EO) polymers combine the slow-light effect in PCWs with the high polarizability of EO polymers, which promises the realization of high-performance optical modulators. In this paper, a broadband, power-efficient, low-dispersion, and compact optical modulator based on an EO polymer filled silicon slot PCW is presented. A small voltage-length product of Vπ*L=0.282Vmm is achieved, corresponding to an unprecedented record-high effective in-device EO coefficient (r33) of 1230pm/V. Assisted by a backside gate voltage, the modulation response up to 50GHz is observed, with a 3-dB bandwidth of 15GHz, and the estimated energy consumption is 94.4fJ/bit at 10Gbit/s. Furthermore, lattice-shifted PCWs are utilized to enhance the optical bandwidth by a factor of ~10X over other modulators based on non-band-engineered PCWs and ring-resonators.

physics.optics↗
arXiv2014

Miniaturized Low-power Electro-optic Modulator Based on Silicon Integrated Nanophotonics and Organic Polymers

We design and demonstrate a compact, low-power, low-dispersion and broadband optical modulator based on electro-optic (EO) polymer refilled silicon slot photonic crystal waveguide (PCW). The EO polymer is engineered for large EO activity and near-infrared transparency. The half-wave switching-voltage is measured to be Vπ=0.97V over optical spectrum range of 8nm, corresponding to a record-high effective in-device r33 of 1190pm/V and Vπ L of 0.291Vmm in a push-pull configuration. Excluding the slow-light effect, we estimate the EO polymer is poled with an ultra-high efficiency of 89pm/V in the slot. In addition, to achieve high-speed modulation, silicon PCW is selectively doped to reduce RC time delay. The 3-dB RF bandwidth of the modulator is measured to be 11GHz, and a modulation response up to 40GHz is observed.

physics.optics↗
arXiv2014

Deterministic coupling of delta-doped NV centers to a nanobeam photonic crystal cavity

The negatively-charged nitrogen vacancy center (NV) in diamond has generated significant interest as a platform for quantum information processing and sensing in the solid state. For most applications, high quality optical cavities are required to enhance the NV zero-phonon line (ZPL) emission. An outstanding challenge in maximizing the degree of NV-cavity coupling is the deterministic placement of NVs within the cavity. Here, we report photonic crystal nanobeam cavities coupled to NVs incorporated by a delta-doping technique that allows nanometer-scale vertical positioning of the emitters. We demonstrate cavities with Q up to ~24,000 and mode volume V ~ $0.47(λ/n)^{3}$ as well as resonant enhancement of the ZPL of an NV ensemble with Purcell factor of ~20. Our fabrication technique provides a first step towards deterministic NV-cavity coupling using spatial control of the emitters.

cond-mat.mes-hall↗
arXiv2014

Highly Efficient Mode Converter for Coupling Light into Wide Slot Photonic Crystal Waveguide

We design, fabricate and experimentally demonstrate a highly efficient adiabatic mode converter for coupling light into a silicon slot waveguide with a slot width as large as 320nm. This strip-to-slot mode converter is optimized to provide a measured insertion loss as low as 0.08dB. Our mode converter provides 0.1dB lower loss compared to a conventional V-shape mode converter. This mode converter is used to couple light into and out of a 320nm slot photonic crystal waveguide, and it is experimentally shown to improve the coupling efficiency up to 3.5dB compared to the V-shape mode converter, over the slow-light wavelength region.

physics.optics↗