arXiv subjects

Xinliang Feng

Publications and source records attributed to Xinliang Feng.

At least 37 records · Page 2Linked to original sources

arXiv2024

Tunable topological phases in nanographene-based spin-1/2 alternating-exchange Heisenberg chains

Unlocking the potential of topological order within many-body spin systems has long been a central pursuit in the realm of quantum materials. Despite extensive efforts, the quest for a versatile platform enabling site-selective spin manipulation, essential for tuning and probing diverse topological phases, has persisted. Here, we utilize on-surface synthesis to construct spin-1/2 alternating-exchange Heisenberg (AH) chains[1] with antiferromagnetic couplings $J_1$ and $J_2$ by covalently linking Clar's goblets -- nanographenes each hosting two antiferromagnetically-coupled unpaired electrons[2]. Utilizing scanning tunneling microscopy, we exert atomic-scale control over the spin chain lengths, parities and exchange-coupling terminations, and probe their magnetic response by means of inelastic tunneling spectroscopy. Our investigation confirms the gapped nature of bulk excitations in the chains, known as triplons[3]. Besides, the triplon dispersion relation is successfully extracted from the spatial variation of tunneling spectral amplitudes. Furthermore, depending on the parity and termination of chains, we observe varying numbers of in-gap $S=1/2$ edge spins, enabling the determination of the degeneracy of distinct topological ground states in the thermodynamic limit-either 1, 2, or 4. By monitoring interactions between these edge spins, we identify the exponential decay of spin correlations. Our experimental findings, corroborated by theoretical calculations, present a phase-controlled many-body platform, opening promising avenues toward the development of spin-based quantum devices.

cond-mat.mtrl-sci↗

arXiv2024

Structural Reinforcement in Mechanically Interlocked Two-Dimensional Polymers by Suppressing Interlayer Sliding

Preserving the superior mechanical properties of monolayer two-dimensional (2D) materials when transitioning to bilayer and layer-stacked structures poses a great challenge, primarily arising from the weak van der Waals (vdW) forces that facilitate interlayer sliding and decoupling. Here, we discover that mechanically interlocked 2D polymers (2DPs) offer a means for structural reinforcement from monolayer to bilayer. Incorporating macrocyclic molecules with one and two cavities into 2DPs backbones enables the precision synthesis of mechanically interlocked monolayer (MI-M2DP) and bilayer (MI-B2DP). Intriguingly, we have observed an exceptionally high effective Young's modulus of 222.4 GPa for MI-B2DP, surpassing those of MI-M2DP (130.1 GPa), vdW-stacked MI-M2DPs (2 MI-M2DP, 8.1 GPa) and other reported multilayer 2DPs. Modeling studies demonstrate the extraordinary effectiveness of mechanically interlocked structures in minimizing interlayer sliding (~0.1 Å) and energy penalty (320 kcal/mol) in MI-B2DP compared to 2 MI-M2DP (~1.2 Å, 550 kcal/mol), thereby suppressing mechanical relaxation and resulting in prominent structural reinforcement.

physics.chem-ph↗

arXiv2023

Giant proton transmembrane transport through sulfophenylated graphene in a direct methanol fuel cell

An ideal proton exchange membrane should only permeate protons and be leak tight for fuels. Graphene is impermeable to water and poorly conducting to protons. Here, we chemically functionalized monolayer graphene to install sulfophenylated sp3 dislocations by diazotization. Selective to protons, transmembrane areal conductances are up to ~50 S/cm2, which is ~5000 fold higher than in pristine graphene. Mounted in a direct methanol fuel cell, sulfophenylated graphene resulted in power densities up to 1.6 W/mg or 123 mW/cm under standard cell operation (60 C), a value ~two-fold larger than micron-thick films of Nafion 117. The combination of sp3 dislocations and polar groups, therefore, allow the creation of hydrophilic ion paths through graphene and unveils a novel route to rationalize transmembrane hydron transport through 2D materials.

physics.chem-ph↗

arXiv2023

Tailoring magnetism of nanographenes via tip-controlled dehydrogenation

Atomically precise graphene nanoflakes, called nanographenes, have emerged as a promising platform to realize carbon magnetism. Their ground state spin configuration can be anticipated by Ovchinnikov-Lieb rules based on the mismatch of π-electrons from two sublattices. While rational geometrical design achieves specific spin configurations, further direct control over the π-electrons offers a desirable extension for efficient spin manipulations and potential quantum device operations. To this end, we apply a site-specific dehydrogenation using a scanning tunneling microscope tip to nanographenes deposited on a Au(111) substrate, which shows the capability of precisely tailoring the underlying π-electron system and therefore efficiently manipulating their magnetism. Through first-principles calculations and tight-binding mean-field-Hubbard modelling, we demonstrate that the dehydrogenation-induced Au-C bond formation along with the resulting hybridization between frontier π-orbitals and Au substrate states effectively eliminate the unpaired π-electron. Our results establish an efficient technique for controlling the magnetism of nanographenes.

cond-mat.mtrl-sci↗

arXiv2023

On-surface synthesis and characterization of Teranthene and Hexanthene: Ultrashort graphene nanoribbons with mixed armchair and zigzag edges

Graphene nanoribbons (GNRs) exhibit a broad range of physicochemical properties that critically depend on their width and edge topology. While the chemically stable GNRs with armchair edges (AGNRs) are semiconductors with width-tunable band gap, GNRs with zigzag edges (ZGNRs) host spin-polarized edge states, which renders them interesting for applications in spintronic and quantum technologies. However, these states significantly increase their reactivity. For GNRs fabricated via on-surface synthesis under ultrahigh vacuum conditions on metal substrates, the expected reactivity of zigzag edges is a serious concern in view of substrate transfer and device integration under ambient conditions, but corresponding investigations are scarce. Using 10-bromo-9,9':10',9''-teranthracene as a precursor, we have thus synthesized hexanthene (HA) and teranthene (TA) as model compounds for ultrashort GNRs with mixed armchair and zigzag edges, characterized their chemical and electronic structure by means of scanning probe methods, and studied their chemical reactivity upon air exposure by Raman spectroscopy. We present a detailed identification of molecular orbitals and vibrational modes, assign their origin to armchair or zigzag edges, and discuss the chemical reactivity of these edges based on characteristic Raman spectral features.

cond-mat.mtrl-sci↗

arXiv2023

A Cu3BHT-Graphene van der Waals Heterostructure with Strong Interlayer Coupling

Two dimensional van der Waals heterostructures (2D are of significant interest due to their intriguing physical properties that are critically defined by the constituent monolayers and their interlayer coupling . However, typical inorganic 2 D vdWhs fall into the weakly coupled region, limiting efficient interfacial charge flow crucial for developing high performance quantum opto electronics. Here, we demonstrate strong interlayer coupling in Cu3 BHT (BHT = benzenehexathiol) graphene vdWhs an organic inorganic bilayer characterized by prominent interlayer charge transfer Monolayer Cu3 BHT with a Kagome lattice is synthesized on the water surface and then coupled with graphene to produce a cm2 scale 2D vdWh. Spectroscopic and electrical studies, along with theoretical calculation s show significant hole transfer from monolayer Cu3 BHT to graphene upon contact , being characteristic fingerprints for strong interlayer coupling This study unveils the great potential of integrating highly pi-conjugated 2D coordination polymers (2DCPs) into 2D vdWhs to explor e intriguing physical phenomena.

physics.app-ph↗

arXiv2023

Hybrid aeromaterials for enhanced and rapid volumetric photothermal response

Conversion of light into heat is essential for a broad range of technologies such as solar thermal heating, catalysis and desalination. Three-dimensional (3D) carbon nanomaterial-based aerogels have shown to hold great promise as photothermal transducer materials. However, till now, their light-to-heat conversion is limited by surface-near absorption, resulting in a strong heat localization only at the illuminated surface region, while most of the aerogel volume remains unused. We present an innovative fabrication concept for highly porous (>99.9%) photothermal hybrid aeromaterials, that enable an ultra-rapid and volumetric photothermal response with an enhancement by a factor of around 2.5 compared to the pristine variant. The hybrid aeromaterial is based on strongly light-scattering framework structures composed of interconnected hollow silicon dioxide (SiO${_2}$) microtubes, which are functionalized with extremely low amounts (in order of a few $μ$g cm${^-}$${^3}$) of reduced graphene oxide (rGO) nanosheets, acting as photothermal agents. Tailoring the density of rGO within the framework structure enables us to control both, light scattering and light absorption, and thus the volumetric photothermal response. We further show that by rapid and repeatable gas activation these transducer materials expand the field of photothermal applications, like untethered light-powered and -controlled microfluidic pumps and soft pneumatic actuators.

physics.app-ph↗

arXiv2023

Multifunctional, Self-Cleaning Air Filters Based on Graphene-Enhanced Ceramic Networks

Particulate air pollution is taking a huge toll on modern society, being associated with more than three million deaths per year. In addition, airborne infectious microorganism can spread dangerous diseases, further elevating the problem. A common way to mitigate the risks of airborne particles is by air filtration. However, conventional air filters usually do not provide any functionality beyond particle removal. They are unable to inactivate accumulated contaminants and therefore need periodic maintenance and replacement to remain operational and safe. This work presents a multifunctional, self-cleaning air filtration system which utilizes a novel graphene-enhanced air filter medium (GeFM). The hybrid network of the GeFM combines the passive structure-based air filtration properties of an underlying ceramic network with additional active features based on the functional properties of a graphene thin film. The GeFM is able to capture >95 % of microorganisms and particles larger than 1 $μ$m and can be repetitively Joule-heated to >300 °C for several hours without signs of degradation. Hereby, built-up organic particulate matter and microbial contaminants are effectively decomposed, regenerating the GeFM. Additionally, the GeFM provides unique options to monitor the filter's air troughput and loading status during operation. The active features of the GeFM can drastically improve filter life-time and safety, offering great potential for the development of safer and more sustainable air filtration solutions to face the future challenges of air pollution and pandemics.

physics.soc-ph↗

arXiv2023

Overcoming water diffusion limitations in hydrogels via microtubular graphene networks for soft actuators

Hydrogel-based soft actuators can operate in sensitive environments, bridging the gap of rigid machines interacting with soft matter. However, while stimuli-responsive hydrogels can undergo extreme reversible volume changes of up to ~90%, water transport in hydrogel actuators is in general limited by their poroelastic behavior. For poly(N-isopropylacrylamide) (PNIPAM) the actuation performance is even further compromised by the formation of a dense skin layer. Here we show, that incorporating a bioinspired microtube graphene network into a PNIPAM matrix with a total porosity of only 5.4 % dramatically enhances actuation dynamics by up to ~400 % and actuation stress by ~4000 % without sacrificing the mechanical stability, overcoming the water transport limitations. The graphene network provides both untethered light-controlled and electrically-powered actuation. We anticipate that the concept provides a versatile platform for enhancing the functionality of soft matter by combining responsive and two-dimensional materials, paving the way towards designing soft intelligent matter.

cond-mat.mtrl-sci↗

arXiv2023

Twisted bilayer zigzag-graphene nanoribbon junctions with tunable edge states

Stacking two-dimensional layered materials such as graphene and transitional metal dichalcogenides with nonzero interlayer twist angles has recently become attractive because of the emergence of novel physical properties. Stacking of one-dimensional nanomaterials offers the lateral stacking offset as an additional parameter for modulating the resulting material properties. Here, we report that the edge states of twisted bilayer zigzag graphene nanoribbons (TBZGNRs) can be tuned with both the twist angle and the stacking offset. Strong edge state variations in the stacking region are first revealed by density functional theory (DFT) calculations. We construct and characterize twisted bilayer zigzag graphene nanoribbon (TBZGNR) systems on a Au(111) surface using scanning tunneling microscopy. A detailed analysis of three prototypical orthogonal TBZGNR junctions exhibiting different stacking offsets by means of scanning tunneling spectroscopy reveals emergent near-zero-energy states. From a comparison with DFT calculations, we conclude that the emergent edge states originate from the formation of flat bands whose energy and spin degeneracy are highly tunable with the stacking offset. Our work highlights fundamental differences between 2D and 1D twistronics and spurs further investigation of twisted one-dimensional systems.

cond-mat.mes-hall↗

arXiv2022

Graphene coating of Nafion$^{(R)}$ membranes for enhanced fuel cell performance

Electrochemically exfoliated graphene (e-G) thin films on Nafion$^{(R)}$ membranes exhibit a selective barrier effect against undesirable fuel crossover. The approach combines the high proton conductivity of state-of-the-art Nafion$^{(R)}$ and the ability of e-G layers to effectively block the transport of methanol and hydrogen. Nafion$^{(R)}$ membranes are coated with aqueous dispersions of e-G on the anode side, making use of a facile and scalable spray process. Scanning transmission electron microscopy (STEM) and electron energy-loss spectroscopy (EELS) confirm the formation of a dense percolated graphene flake network which acts as diffusion barrier. The maximum power density in direct methanol fuel cell (DMFC) operation with e-G coated Nafion$^{(R)}$ N115 is 3.9 times higher than the Nafion$^{(R)}$ N115 reference (39 vs. 10 mW cm$^{-2}$ @ 0.3 V) at 5M methanol feed concentration. This suggests the application of e-G coated Nafion$^{(R)}$ membranes for portable DMFCs, where the use of highly concentrated methanol is desirable.

physics.app-ph↗

arXiv2022

Growth optimization and device integration of narrow-bandgap graphene nanoribbons

The electronic, optical and magnetic properties of graphene nanoribbons (GNRs) can be engineered by controlling their edge structure and width with atomic precision through bottom-up fabrication based on molecular precursors. This approach offers a unique platform for all-carbon electronic devices but requires careful optimization of the growth conditions to match structural requirements for successful device integration, with GNR length being the most critical parameter. In this work, we study the growth, characterization, and device integration of 5-atom wide armchair GNRs (5-AGNRs), which are expected to have an optimal band gap as active material in switching devices. 5-AGNRs are obtained via on-surface synthesis under ultra-high vacuum conditions from Br- and I-substituted precursors. We show that the use of I-substituted precursors and the optimization of the initial precursor coverage quintupled the average 5-AGNR length. This significant length increase allowed us to integrate 5-AGNRs into devices and to realize the first field-effect transistor based on narrow bandgap AGNRs that shows switching behavior at room temperature. Our study highlights that optimized growth protocols can successfully bridge between the sub-nanometer scale, where atomic precision is needed to control the electronic properties, and the scale of tens of nanometers relevant for successful device integration of GNRs.

cond-mat.mtrl-sci↗

arXiv2021

Synthesis and characterization of super-nonazethrene

Beginning with the early work of Clar et al. in 1955, zethrenes and their laterally-extended homologues, super-zethrenes, have been intensively studied in the solution phase, and are widely investigated as optical and charge transport materials. Super-zethrenes are also considered to exhibit an open-shell ground state. Zethrenes may thus serve as model compounds to investigate nanoscale pi-magnetism. However, their synthesis is extremely challenging due to their high reactivity. We report here a combined in-solution and on-surface synthesis of the hitherto largest zethrene homologue - super-nonazethrene - on Au(111). Using single-molecule scanning tunneling microscopy and spectroscopy, we show that super-nonazethrene exhibits an open-shell singlet ground state featuring a large spin polarization-driven electronic gap of 1 eV. We obtain real-space maps of the frontier molecular orbitals, and find that they correspond to singly occupied molecular orbitals. In consistence with the emergence of an open-shell ground state, high-resolution tunneling spectroscopy reveals inelastic singlet-triplet spin excitations in super-nonazethrene, characterized by a strong intramolecular magnetic exchange coupling of 51 meV. Further insights are gained by mean-field and many-body perturbation theory calculations. Given the paucity of zethrene chemistry on surfaces, our results therefore provide unprecedented access to large open-shell zethrene compounds amenable to scanning probe measurements, with potential application in molecular spintronics.

cond-mat.mes-hall↗

arXiv2021

Observation of fractional edge excitations in nanographene spin chains

Fractionalization is a phenomenon in which strong interactions in a quantum system drive the emergence of excitations with quantum numbers that are absent in the building blocks. Outstanding examples are excitations with charge e/3 in the fractional quantum Hall effect, solitons in one-dimensional conducting polymers and Majorana states in topological superconductors. Fractionalization is also predicted to manifest itself in low-dimensional quantum magnets, such as one-dimensional antiferromagnetic S = 1 chains. The fundamental features of this system are gapped excitations in the bulk and, remarkably, S = 1/2 edge states at the chain termini, leading to a four-fold degenerate ground state that reflects the underlying symmetry-protected topological order. Here, we use on-surface synthesis to fabricate one-dimensional spin chains that contain the S = 1 polycyclic aromatic hydrocarbon triangulene as the building block. Using scanning tunneling microscopy and spectroscopy at 4.5 K, we probe length-dependent magnetic excitations at the atomic scale in both open-ended and cyclic spin chains, and directly observe gapped spin excitations and fractional edge states therein. Exact diagonalization calculations provide conclusive evidence that the spin chains are described by the S = 1 bilinear-biquadratic Hamiltonian in the Haldane symmetry-protected topological phase. Our results open a bottom-up approach to study strongly correlated quantum spin liquid phases in purely organic materials, with the potential for the realization of measurement-based quantum computation.

cond-mat.mes-hall↗

arXiv2020

Designer spin order in diradical nanographenes

The magnetic properties of carbon materials are at present the focus of an intense research effort in physics, chemistry and materials science due to their potential applications in spintronics and quantum computations. Although the presence of spins in open-shell nanographenes has been recently confirmed, the ability to control magnetic coupling sign has remained elusive, but the most desirable. Here, we demonstrate an effective approach of engineering magnetic ground states in atomically precise open-shell bipartite/nonbipartite nanographenes using combined scanning probe techniques and mean-field Hubbard model calculations. The magnetic coupling sign between two spins has been controlled via breaking bipartite lattice symmetry of nanographenes. In addition, the exchange-interaction strength between two spins has been widely tuned by finely tailoring their spin density overlap, realizing a large exchange-interaction strength of 42 meV. Our demonstrated method provides ample opportunities for designer above-room-temperature magnetic phases and functionalities in graphene nanomaterials.

cond-mat.mes-hall↗

arXiv2020

On-surface synthesis of nitrogen-doped nanographenes with 5-7 membered rings

We report on the formation of nitrogen-doped nanographenes containing five- and seven-membered rings by thermally induced cyclodehydrogenation on the Au(111) surface. Using scanning tunneling microscopy and supported by calculations, we investigated the structure of precursor and targets, as well as of intermediates. Scanning tunneling spectroscopy shows that the electronic properties of the target nanographenes are strongly influenced by the additional formation of non-hexagonal rings.

cond-mat.mtrl-sci↗

arXiv2020

Collective All-Carbon Magnetism in Triangulene Dimers

Triangular zigzag nanographenes, such as triangulene and its pi-extended homologues, have received widespread attention as organic nanomagnets for molecular spintronics, and may serve as building blocks for high-spin networks with long-range magnetic order - of immense fundamental and technological relevance. As a first step toward these lines, we present the on-surface synthesis and a proof-of-principle experimental study of magnetism in covalently bonded triangulene dimers. On-surface reactions of rationally-designed precursor molecules on Au(111) lead to the selective formation of triangulene dimers in which the triangulene units are either directly connected through their minority sublattice atoms, or are separated via a 1,4-phenylene spacer. The chemical structures of the dimers have been characterized by bond-resolved scanning tunneling microscopy. Scanning tunneling spectroscopy and inelastic electron tunneling spectroscopy measurements reveal collective singlet-triplet spin excitations in the dimers, demonstrating efficient inter-triangulene magnetic coupling.

cond-mat.mes-hall↗

arXiv2020

Wetting Properties of Graphene Aerogels

Graphene hydrophobic coatings paved the way towards a new generation of optoelectronic and fluidic devices. Nevertheless, such hydrophobic thin films rely only on graphene non-polar surface, rather than taking advantage of its surface roughness. Furthermore, graphene is typically not self-standing. Differently, carbon aerogels have high porosity, large effective surface area due to their surface roughness, and very low mass density, which make them a promising candidate as a super-hydrophobic material for novel technological applications. However, despite a few works reporting the general super-hydrophobic and lipophilic behavior of the carbon aerogels, a detailed characterization of their wetting properties is still missing, to date. Here, the wetting properties of graphene aerogels are demonstrated in detail. Without any chemical functionalization or patterning of their surface, the samples exhibit a super-lipophilic state and a stationary super-hydrophobic state with a contact angle up to $150\pm15^°$ and low contact angle hysteresis $\approx15^°$, owing to the fakir effect. In addition, the adhesion force of the graphene aerogels in contact with the water droplets and their surface tension are evaluated. For instance, the unique wettability and enhanced liquid absorption of the graphene aerogels can be exploited for reducing contamination from oil spills and chemical leakage accidents.

physics.app-ph↗