SearcharxivSearch

arXiv subjects

Xueyun Wang

Publications and source records attributed to Xueyun Wang.

At least 19 recordsLinked to original sources

Polarization Vortices in a Ferromagnetic Metal via Twistronics

Recent advances in moire engineering provide new pathways for manipulating lattice distortions and electronic properties in low-dimensional materials. Here, we demonstrate that twisted stacking can induce dipolar vortices in metallic SrRuO3 membranes, despite the presence of free charges that would normally screen depolarizing fields and dipole-dipole interactions. These polarization vortices are correlated with moire-periodic flexoelectricity induced by shear strain gradients, and exhibit a pronounced dependence on the twist angle. In addition, multiferroic behavior emerges below the ferromagnetic Curie temperature of the films, whereby polarization and ferromagnetism coexist and compete, showing opposite twist-angle dependencies of their respective magnitudes. Density functional theory calculations provide insights into the microscopic origin of these observations. Our findings extend the scope of polarization topology design beyond dielectric materials and into metals.

cond-mat.mtrl-sci

Nonlinear Breakdown of Antisymmetric Flexoelectric Coupling

Flexoelectric coupling is conventionally regarded as antisymmetric, such that reversing the strain gradient reverses the polarization direction while preserving its magnitude. Here we report that this antisymmetric coupling breaks down in noncentrosymmetric single crystals driven by large strain gradients, where nonlinearity becomes operative. Harmonic-resolved measurements reveal robust even-order flexoelectric harmonics that are forbidden in antisymmetric systems, as well as the three-wave mixing indicative of symmetry breaking under dual-frequency excitation. These frequency-relevant generations provide evidence for asymmetric flexoelectricity in the nonlinear regime. A reconstructed nonlinear constitutive framework consistently accounts for all observations by incorporating even-order strain-gradient terms. Our findings establish asymmetric flexoelectricity as an intrinsic electromechanical response and uncover a symmetry-breaking mechanism in flexoelectricity.

cond-mat.mtrl-sci

Polar Vortex Superstructure and Its Coupling with Correlated Electrons in Quasiperiodic Moire Crystal

Nanoscale polar structures are significant for understanding polarization processes in low-dimensional systems and hold potential for developing high-performance electronics. Here, we demonstrate a polar vortex superstructure arising from the reconstructed moiré patterns in twisted bilayer graphene aligned with hexagonal boron nitride. Scanning tunneling microscopy reveals spatially modulated charge polarization, while theoretical simulations indicate that the in-plane polarization field forms an array of polar vortices. Notably, this polar field is gate-tunable, exhibiting an unconventional gate-tunable polar sliding and screening process. Moreover, its interaction with electron correlations in twisted bilayer graphene leads to modulated correlated states. Our findings establish moiré pattern reconstruction as a powerful strategy for engineering nanoscale polar structures and emergent quantum phases in van der Waals materials.

cond-mat.mes-hall

Overview of EXL-50 Research Progress and Future Plan

XuanLong-50 (EXL-50) is the first medium-size spherical torus (ST) in China, with the toroidal field at major radius at 50 cm around 0.5T. CS-free and non-inductive current drive via electron cyclotron resonance heating (ECRH) was the main physics research issue for EXL-50. Discharges with plasma currents of 50 kA - 180 kA were routinely obtained in EXL-50, with the current flattop sustained for up to or beyond 2 s. The current drive effectiveness on EXL-50 was as high as 1 A/W for low-density discharges using 28GHz ECRH alone for heating power less than 200 kW. The plasma current reached Ip>80 kA for high-density (5*10e18m-2) discharges with 150 kW 28GHz ECRH. Higher performance discharge (Ip of about 120 kA and core density of about 1*10e19m-3) was achieved with 150 kW 50GHz ECRH. The plasma current in EXL-50 was mainly carried by the energetic electrons.Multi-fluid equilibrium model has been successfully applied to reconstruct the magnetic flux surface and the measured plasma parameters of the EXL-50 equilibrium. The physics mechanisms for the solenoid-free ECRH current drive and the energetic electrons has also been investigated. Preliminary experimental results show that 100 kW of lower hybrid current drive (LHCD) waves can drive 20 kA of plasma current. Several boron injection systems were installed and tested in EXL-50, including B2H6 gas puffing, boron powder injection, boron pellet injection. The research plan of EXL-50U, which is the upgrade machine of EXL-50, is also presented.

physics.plasm-ph

Real-space topology-engineering of skyrmionic spin textures in a van der Waals ferromagnet Fe3GaTe2

Realizing magnetic skyrmions in two-dimensional (2D) van der Waals (vdW) ferromagnets offers unparalleled prospects for future spintronic applications. The room-temperature ferromagnet Fe3GaTe2 provides an ideal platform for tailoring these magnetic solitons. Here, skyrmions of distinct topological charges are artificially introduced and spatially engineered using magnetic force microscopy (MFM). The skyrmion lattice is realized by specific field-cooling process, and can be further controllably erased and painted via delicate manipulation of tip stray field. The skyrmion lattice with opposite topological charges (S = +1 or -1) can be tailored at the target regions to form topological skyrmion junctions (TSJs) with specific configurations. The delicate interplay of TSJs and spin-polarized device current were finally investigated via the in-situ transport measurements, alongside the topological stability of TSJs. Our results demonstrate that Fe3GaTe2 not only serves as a potential building block for room-temperature skyrmion-based spintronic devices, but also presents promising prospects for Fe3GaTe2-based heterostructures with the engineered topological spin textures.

cond-mat.mtrl-sci

Site-ordering/disordering-induced magnetic textures in a vdW ferromagnet by competing global and broken inversion-symmetry

Fe5GeTe2 single crystals can be divided into nonquenched (NQ) and quench-cooled (QC) phases with different magnetic properties. A comprehensive understanding of the magnetic property variations in the NQ and QC phases is imperative for guiding Fe5GeTe2 towards spintronics applications; however, it remains elusive. Here, we report a real-space study on the structural and magnetic properties of these two magnetic phases using cryogenic magnetic force microscopy and scanning tunneling microscopy. The thermal history introduces disorder and order to the Fe(1) sites, resulting in the NQ and QC phases exhibiting global and broken inversion symmetry, respectively. The observed magnetic domain transitions (branching to labyrinthine) in the spin reorientation process and the distinct 3D spin textures stabilized by magnetic dipolar interaction observed in field-dependent studies allow the NQ phase to exhibit a more resilient global magnetic state. In contrast, the QC phase exhibits enhanced magnetic anisotropy, resulting in a higher TC. Meanwhile, the Dzyaloshinskii-Moriya interaction (DMI) introduced by the broken inversion symmetry causes the QC phase to exhibit a localized magnetic state: no domain transformation occurs during spin reorientation, and irregular domain states are observed in field-related studies. Our work provides an important reference for understanding the complex magnetic properties in Fe5GeTe2.

cond-mat.mtrl-sci

Local Manipulation of Skyrmion Lattice in Fe3GaTe2 at Room Temperature

Motivated by advances in spintronic devices, an extensive exploration is underway to uncover materials that host topologically protected spin textures, exemplified by skyrmions. One critical challenge involved in the potential application of skyrmions in van der Waals (vdW) materials is the attainment and manipulation of skyrmions at room temperature. In this study, we report the creation of intrinsic skyrmion state in van der Waals ferromagnet Fe3GaTe2. By employing variable temperature magnetic force microscopy, the skyrmion lattice can be locally manipulated on Fe3GaTe2 flake. The ordering of skyrmion state is further analyzed. Our result suggest Fe3GaTe2 emerges as a highly promising contender for the realization of skyrmion-based layered spintronic memory devices.

cond-mat.mtrl-sci

Electronic and Vibrational Excitations on the Surface of the Three-Dimensional Topological Insulator Bi$_2$Te$_{3-x}$Se$_{x}$ (x = 0, 2, 3)

We study surface states in the three-dimensional topological insulators Bi$_2$Te$_{3-x}$Se$_{x}$ (x = 0, 2, 3) by polarization resolved resonant Raman spectroscopy. By tracking the spectral intensity of the surface phonon modes with respect to the incident photon energy, we show that the surface phonons are qualitatively similar to their bulk counterparts. Using the resonant Raman excitation profile, we estimated the binding energy of the surface conduction bands relative to bulk conduction bands. In addition, we selectively excite the surface-to-bulk electronic continuum near the Fermi energy in Bi$_2$Se$_3$ to determine the strength of Fano interaction between the most prominent surface phonon and the surface-to-bulk continuum.

cond-mat.mtrl-sci

Coexisting Ferromagnetic-antiferromagnetic Phase and Manipulation in Magnetic Topological Insulator MnBi4Te7

Magnetic topological insulators (MTIs) have received a lot of attention due to the existence of various quantum phenomena such as quantum anomalous Hall effect (QAHE) and topological magnetoelectric effect, etc. The intrinsic superlattice-like layered MTIs, MnBi2Te4/(Bi2Te3)n, have been extensively investigated mainly through the transport measurements, while the direct investigation of their superlattice-sensitive magnetic behaviors is relatively rare. Here, we report a microscopic real-space investigation of magnetic phase behaviors in MnBi4Te7 using cryogenic magnetic force microscopy (MFM). The intrinsic robust A-type antiferromagnetic (AFM), and emerged surface spin-flop (SSF), canted AFM (CAFM), ferromagnetic (FM)+CAFM, forced FM phases are sequentially visualized via the increased external magnetic field, in agreement with the metamagnetic behavior in the M-H curve. The temperature-dependent magnetic phase evolution behaviors are further investigated to obtain the complete H-T phase diagram of MnBi4Te7. The tentative local phase manipulation via the stray field of the magnetic tip is demonstrated by transforming the AFM to FM phase in its surface layers of MnBi4Te7. Our study the not only provide key real-space ingredients for understanding their complicated magnetic, electronic, and topological properties of these intrinsic MTIs, but also suggest new directions for manipulating spin textures and locally controlling their exotic properties.

cond-mat.mtrl-sci

Zero Poisson' s Ratio and Suppressed Mechanical Anisotropy in BP/SnSe Van der Waals Heterostructure: A First-principles Study

Black phosphorene and its analogs have attracted intensive attention due to their unique puckered structures, anisotropic characteristics, and negative Poisson's ratio. The van der Waals heterostructures assembly by stacking different materials may show novel physical properties which the parent materials don't possess. In this work, the first-principles calculations were performed to study the mechanical properties of the BP/SnSe van der Waals heterostructure. Interestingly, a near-zero Poisson's ratio vzx was found in BP/SnSe heterostructure. In addition, compared to the parent materials BP and SnSe with strong in-plane anisotropic mechanical properties, the BP/SnSe heterostructure shows strongly suppressed anisotropy. Our findings suggest that the vdW heterostructure could show quite different mechanical properties from the parent materials and provide new opportunities for the mechanical applications of the heterostructures.

cond-mat.mtrl-sci

Asynchronous and Load-Balanced Union-Find for Distributed and Parallel Scientific Data Visualization and Analysis

We present a novel distributed union-find algorithm that features asynchronous parallelism and k-d tree based load balancing for scalable visualization and analysis of scientific data. Applications of union-find include level set extraction and critical point tracking, but distributed union-find can suffer from high synchronization costs and imbalanced workloads across parallel processes. In this study, we prove that global synchronizations in existing distributed union-find can be eliminated without changing final results, allowing overlapped communications and computations for scalable processing. We also use a k-d tree decomposition to redistribute inputs, in order to improve workload balancing. We benchmark the scalability of our algorithm with up to 1,024 processes using both synthetic and application data. We demonstrate the use of our algorithm in critical point tracking and super-level set extraction with high-speed imaging experiments and fusion plasma simulations, respectively.

cs.DC

The Observation of Ferroelastic and Ferrielectric Domains in AgNbO3 Single Crystal

Compared to AgNbO3 based ceramics, the experimental investigations on the single crystalline AgNbO3, especially the ground state and ferroic domain structures, are not on the same level. Here in this work, based on successfully synthesized AgNbO3 single crystal using flux method, we observed the coexistence of ferroelastic and ferrielectric domain structures by a combination study of polarized light microscopy and piezoresponse force microscope, this finding may provide a new aspect for studying AgNbO3. The result also suggests a weak electromechanical response from the ferrielectric phase of AgNbO3 which is also supported by the transmission electron microscope characterization. Our results reveal that the AgNbO3 single crystal is in a polar ferrielectric phase at room temperature, clarifying its ground state which is controversial from the AgNbO3 ceramic materials.

cond-mat.mtrl-sci

Giant Polarization and Abnormal Flexural Deformation in Bent Freestanding Perovskite Oxides

Recent realizations of ultrathin freestanding perovskite oxides offer a unique platform to probe novel properties in two-dimensional oxides. Here, we observed a giant flexoelectric response in freestanding BiFeO3 and SrTiO3 in their bent state arising from strain gradients up to 4x10e7/m, suggesting a promising approach for realizing extremely large polarizations. Additionally, a substantial reversible change in thickness was discovered in bent freestanding BiFeO3, which implies an unusual bending-expansion/shrinkage and thickness-dependence Poisson's ratios in this ferroelectric membrane that has never been seen before in crystalline materials. Our theoretical modeling reveals that this unprecedented flexural deformation within the membrane is attributable to a flexoelectricity-piezoelectricity interplay. The finding unveils intriguing nanoscale electromechanical properties and provides guidance for their practical applications in flexible nanoelectromechanical systems.

cond-mat.mtrl-sci

Conductive Domain Walls in Non-Oxide Ferroelectrics Sn2P2S6

The conductive domain wall (CDW) is extensively investigated in ferroelectrics, which can be considered as a quasi-two-dimensional reconfigurable conducting channel embedded into an insulating material. Therefore, it is highly important for the application of ferroelectric nanoelectronics. Hitherto, most CDW investigations are restricted in oxides, and limited work has been reported in non-oxides to the contrary. Here, by successfully synthesizing the non-oxide ferroelectric Sn2P2S6 single crystal, we observed and confirmed the domain wall conductivity by using different scanning probe techniques which origins from the nature of inclined domain walls. Moreover, the domains separated by CDW also exhibit distinguishable electrical conductivity due to the interfacial polarization charge with opposite signs. The result provides a novel platform for understanding electrical conductivity behavior of the domains and domain walls in non-oxide ferroelectrics.

cond-mat.mtrl-sci

Domain evolution in bended freestanding BaTiO3 ultrathin films: a phase-field simulation

Perovskite ferroelectric oxides are usually considered to be brittle materials, however, recent work [Dong et al., Science 366, 475 (2019)] demonstrated the super-elasticity in the freestanding BaTiO3 thin films. This property may originate from the ferroelectric domain evolution during the bending, which is difficult to observe in experiments. Therefore, understanding the relation among the bending deformation, thickness of the films, and the domain dynamics is critical for their potential applications in flexible ferroelectric devices. Here, we reported the dynamics of ferroelectric polarization in the freestanding BaTiO3 ultrathin films in the presence of large bending deformation up to 40° using phase-field simulation. The ferroelectric domain evolution reveals the transition from the flux-closure to a/c domains with "vortex-like" structures, which caused by the increase of out-of-plane ferroelectric polarization. Additionally, by varying the film thickness in the identical bending situation, we found the a/c phase with "vortex-like" structure emerges only as the film thickness reached 12 nm or higher. Results from our investigations provide instructive information for the microstructure evolution of bending ferroelectric perovskite oxide films, which could serve as guide for the future application of ferroelectric films on flexible electronic devices.

cond-mat.mtrl-sci

Screening piezoelectricity in determination of flexoelectric coefficient at nanoscale

Piezoelectricity usually accompanies with flexoelectricity in polar materials which is the linear response of polarization to a strain gradient. Therefore, it is hard to eliminate piezoelectric effect in determination of pure flexoelectric response. In this work, we propose an analytical method to characterize the flexoelectric coefficient quantitatively at nanoscale in piezoelectric materials by screening piezoelectricity. Our results show that the flexoelectricity reduces the nanopillar stiffness while the piezoelectricity enhances it. With careful design of the shape of the nanopillars and measuring their stiffness difference, the flexoelectric coefficient can be obtained with the piezoelectric contribution eliminated completely. This approach avoids the measurement of electrical properties with dynamic load, which helps to reduce the challenge of flexoelectric measurement at nanoscale. Our work will be beneficial to quantitative characterization of flexoelectric properties and design of flexoelectric devices at nanoscale.

cond-mat.mtrl-sci

Ferroelastic switching with van der Waals direction transformation in layered PdSe2 driven by uniaxial and shear strain

Uniaxial and biaxial strain approaches are usually implemented to switch the ferroelastic states, which play a key role in the application of the ferroics and shape memory materials. In this work, by using the first-principles calculations, we found not only uniaxial strain, but also shear strain can induce a novel ferroelastic switching, in which the van der Waals (vdW) layered direction rotates with the ferroelastic transition in layered bulk PdSe2. The shear strain induces ferroelastic switching with three times amplitude smaller than uniaxial strain. The novel three-states ferroelastic switching in layered PdSe2 also occurs under shear strain. Our result shows that the shear strain could be used as an effective approach for manipulating the functionalities of layered materials in potential device applications.

cond-mat.mtrl-sci

Picosecond-precision optical time transfer in free space using flexible binary offset carrier modulation

Free-space optical time transfer that features high precision and flexibility will act a crucial role in near-future ground-to-satellite/inter-satellite clock networks and outdoor timing services. Here we propose a free-space optical flexible-binary-offset-carrier-modulated (FlexBOC-modulated) time transfer method. The utilized FlexBOC modulation could yield a comparative precision, although its occupied bandwidth is tremendously reduced by at least 97.5% compared to optical binary phase modulation. Meanwhile, the adoption of optical techniques eliminates the multi-path effect that is major limit in the current microwave satellite time transfer system. What's more, the time interval measurement avoids a continuous link that may be routinely broken by physical obstructions. For verification, a time transfer experiment with our home-built system between two sites separated by a 30-m free-space path outside the laboratory was conducted. Over a 15 h period, the time deviation is 2.3 ps in a 1-s averaging time, and averages down to 1.0 ps until ~60 s. The fractional frequency instability exhibits 4.0E-12 at a gate time of 1 s, and approaches to 2.6E10-15 at 10000 s.

eess.SP