arXiv subjects

Y. Favre

Publications and source records attributed to Y. Favre.

At least 19 recordsLinked to original sources

arXiv2026

The Super Fine-Grained Detector for the T2K neutrino oscillation experiment

The magnetised near detector ND280 of the long-baseline neutrino experiment T2K has been upgraded to improve its detection performance and, consequently, enhance our understanding of neutrino-nucleus interactions, reducing the systematic uncertainties in measurements of the neutrino oscillation parameters. A key component of the upgrade is a novel segmented plastic scintillator detector, called the Super Fine-Grained Detector (SuperFGD), made of approximately 2 million optically isolated 1 cm$^3$ cubes read out by three orthogonal wavelength-shifting (WLS) fibres. Scintillation photons are detected by 55,888 Hamamatsu Multi-Pixel Photon Counters (MPPCs). The SuperFGD provides 3D images of neutrino interactions by tracking the final-state charged particles produced isotropically, including protons down to a threshold of around 330 MeV/$c$. The high light yield of SuperFGD greatly improves particle identification and the sub-nanosecond time resolution provides an excellent identification of Michel electrons. The SuperFGD is also able to detect neutrons from neutrino interactions and, for the first time in a neutrino experiment, to reconstruct their kinetic energy using a fine detector segmentation and by measuring the time-of-flight with sub-nanosecond precision. In this article the details of the detector design, construction and performance are described. The detector was installed in ND280 and successfully commissioned with cosmic data in 2023 and, later, with the T2K neutrino beam. The detector response has been characterised with the 2023 and 2024 data and the results are reported in this article.

physics.ins-det↗

arXiv2026

Prospects for the detection of gamma rays using Cherenkov telescopes enhanced by a ground array observatory

We study through detailed simulated data and their optimized analysis the expected performance of the Single-Mirror Small-Size imaging atmospheric Cherenkov Telescopes (SST-1M) potentially located inside a high-altitude array of Water-Cherenkov Detectors (WCDs) inspired by the current foreseen design of the Southern Wide-field Gamma-ray Observatory (SWGO). For such a hybrid setup, we show an improvement in the flux sensitivity above 10 TeV by about 60% for monocular and 30% for stereoscopic SST-1M observation, due to the improved gamma/hadron separation when additional parameters from the WCD array are used. We also discuss further benefits of the hybrid gamma observatory concept and its technical challenges.

astro-ph.IM↗

arXiv2025

The simulation chain for the Terzina Cherenkov telescope on board the NUSES space mission

The Terzina telescope is designed to detect ultra-high energy cosmic rays (UHECRs) and Earth-skimming neutrinos from a 550 km low-Earth orbit (LEO) by observing Cherenkov light emitted by Extensive Air Showers (EAS) in the Earth's atmosphere pointing towards the telescope and in the field of view. In this contribution, a simulation chain for the Terzina telescope on board the NUSES mission will be presented. The chain encompasses all stages of the detection process, from event generation and EAS modelling with CORSIKA and EASCherSim to Geant4-based simulations of the telescope's geometry and optics, followed by modelling of the trigger system and silicon photomultiplier (SiPM) response. The Geant4 module includes the real CAD model of the telescope structure and optical components, with aspherical lenses manually implemented to ensure accurate representation of the optical efficiency and point spread function in Geant4. This comprehensive pipeline, developed using modular C++ code and Python tools for event analysis and reconstruction, produces detailed performance assessments of a telescope operating in a LEO mission but can be adapted for any high altitude Cherenkov telescope, making it a versatile tool for future observatory designs. The possibility of modelling balloons in the atmosphere has also been developed.

astro-ph.IM↗

arXiv2025

Introducing a Markov Chain-Based Time Calibration Procedure for Multi-Channel Particle Detectors: Application to the SuperFGD and ToF Detectors of the T2K Experiment

Inter-channel mis-synchronisation can be a limiting factor to the time resolution of high performance timing detectors with multiple readout channels and independent electronics units. In these systems, time calibration methods employed must be able to efficiently correct for minimal mis-synchronisation between channels and achieve the best detector performance. We present an iterative time calibration method based on Markov Chains, suitable for detector systems with multiple readout channels. Starting from correlated hit pairs alone, and without requiring an external reference time measurement, the method solves for fixed per-channel offsets, with precision limited only by the intrinsic single-channel resolution. A mathematical proof that the method is able to find the correct time offsets to be assigned to each detector channel in order to achieve inter-channel synchronisation is given, and it is shown that the number of iterations to reach convergence within the desired precision is controllable with a single parameter. Numerical studies are used to confirm unbiased recovery of true offsets. Finally, the application of the calibration method to the Super Fine-Grained Detector (SuperFGD) and the Time of Flight (TOF) detector at the upgraded T2K near detector (ND280) shows good improvement in overall timing resolution, demonstrating the effectiveness in a real-world scenario and scalability.

physics.ins-det↗

arXiv2025

The SST-1M stereoscopic system

The Single-Mirror Small-Size Telescope (SST-1M) is an Imaging Atmospheric Cherenkov Telescope designed for detecting very high-energy gamma rays. With a compact design achieved through the adoption of silicon-photomultiplier pixels and a lightweight structure, SST-1M offers a large field of view of about 9{\deg} and features a mirror system of 4 m diameter with an optical PSF (at 80% of photon inclusion) of 0.08{\deg} on axis and 0.21{\deg} at 4{\deg} off-axis, and a fully digitizing readout almost deadtime free up to few kHz. The SST-1M achieved a high-performance and cost-effective solution for implementing an array of small-sized telescopes. The stereoscopic system of two SST-1Ms is temporarily installed at the Ond\v{r}ejov Observatory in the Czech Republic. From an altitude of only about 510 m and in harsh meteorological conditions, the system is detecting galactic sources and flares of AGNs. The accurate calibration of the detector and the simulation benchmark are ongoing. The results of its performance are shown. A future final location is being considered and a future performance outlook is discussed.

astro-ph.IM↗

arXiv2025

Observation of the Crab Nebula with the Single-Mirror Small-Size Telescope stereoscopic system at low altitude

The Single-Mirror Small-Size Telescope (SST-1M) stereoscopic system is composed of two Imaging Atmospheric Cherenkov Telescopes (IACTs) designed for optimal performance for gamma-ray astronomy in the multi-TeV energy range. It features a 4-meter-diameter tessellated mirror dish and an innovative SiPM-based camera. Its optical system features a 4-m diameter spherical mirror dish based on the Davies-Cotton design, maintaining a good image quality over a large FoV while minimizing optical aberrations. In 2022, two SST-1M telescopes were installed at the Ond\v{r}ejov Observatory, Czech Republic, at an altitude of 510 meters above sea level, and have been collecting data for commissioning and astronomical observations since then. We present the first SST-1M observations of the Crab Nebula, conducted between September 2023 and March 2024 in both mono and stereoscopic modes. During this observation period, 46 hours for the SST-1M-1 and 52 hours for the SST-1M-2 were collected for which 33 hours are in stereoscopic mode. We use the Crab Nebula observation to validate the expected performance of the instrument, as evaluated by Monte Carlo simulations carefully tuned to account for instrumental and atmospheric effects. We determined that the energy threshold at the analysis level for the zenith angles below $30^\circ$ is 1 TeV for mono mode and 1.3 TeV for stereo mode. The energy and angular resolutions are approximately 20% and $0.18^\circ$ for mono mode and 10% and $0.10^\circ$ for stereo mode, respectively. We present the off-axis performance of the instrument and a detailed study of systematic uncertainties. The results of a full simulation of the telescope and its camera is compared to the data for the first time, allowing a deep understanding of the SST-1M array performance.

astro-ph.IM↗

arXiv2024

Testbeam Characterization of a SiGe BiCMOS Monolithic Silicon Pixel Detector with Internal Gain Layer

A monolithic silicon pixel ASIC prototype, produced in 2024 as part of the Horizon 2020 MONOLITH ERC Advanced project, was tested with a 120 GeV/c pion beam. The ASIC features a matrix of hexagonal pixels with a 100 \mu m pitch, read by low-noise, high-speed front-end electronics built using 130 nm SiGe BiCMOS technology. It includes the PicoAD sensor, which employs a continuous, deep PN junction to generate avalanche gain. Data were taken across power densities from 0.05 to 2.6 W/cm2 and sensor bias voltages from 90 to 180 V. At the highest bias voltage, corresponding to an electron gain of 50, and maximum power density, an efficiency of (99.99 \pm 0.01)% was achieved. The time resolution at this working point was (24.3 \pm 0.2) ps before time-walk correction, improving to (12.1 \pm 0.3) ps after correction.

physics.ins-det↗

arXiv2024

Analysis of commissioning data from SST-1M : A Prototype of Single-Mirror Small Size Telescope

SST-1M is a prototype of a single-mirror Small Size Telescope developed by a consortium of institutes from Poland, Switzerland and the Czech Republic. With a wide field of view of 9 degrees, SST-1Ms are designed to detect gamma-rays in the energy range between 1 and 300 TeV. The design of the SST-1M follows the Davies-Cotton concept, with a 9.42m2 multi-segment mirror. SST-1M is equipped with DigiCam camera, which features a fully digital readout and trigger system using 250 MHz ADC, and a compact Photo-Detector Plane (PDP) composed of 1296 pixels, each made of a hexagonal light guide coupled to silicone photomultipliers (SiPM). Two SST-1M telescopes are currently being commissioned at the Ondrejov Observatory in the Czech Republic, where they are successfully observing Cerenkov events in stereo. This contribution will present an overview of calibration strategies and performance evaluation based on data collected at the observatory.

astro-ph.IM↗

arXiv2024

The SST-1M imaging atmospheric Cherenkov telescope for gamma-ray astrophysics

The SST-1M is a Small-Sized Telescope (SST) designed to provide a cost-effective and high-performance solution for gamma-ray astrophysics, particularly for energies beyond a few TeV. The goal is to integrate this telescope into an array of similar instruments, leveraging its lightweight design, earthquake resistance, and established Davies-Cotton configuration. Additionally, its optical system is designed to function without a protective dome, allowing it to withstand the harsh atmospheric conditions typical of mountain environments above 2000 m. The SST-1M utilizes a fully digitizing camera system based on silicon photomultipliers (SiPMs). This camera is capable of digitizing all signals from the UV-optical light detectors, allowing for the implementation of various triggers and data analysis methods. We detail the process of designing, prototyping, and validating this system, ensuring that it meets the stringent requirements for gamma-ray detection and performance. An SST-1M stereo system is currently operational and collecting data at the Ond\v{r}ejov observatory in the Czech Republic, situated at 500 m. Preliminary results from this system are promising. A forthcoming paper will provide a comprehensive analysis of the performance of the telescopes in detecting gamma rays and operating under real-world conditions.

astro-ph.IM↗

arXiv2024

Testbeam results of irradiated SiGe BiCMOS monolithic silicon pixel detector without internal gain layer

Samples of the monolithic silicon pixel ASIC prototype produced in 2022 within the framework of the Horizon 2020 MONOLITH ERC Advanced project were irradiated with 70 MeV protons up to a fluence of 1 x 1016 neq/cm2, and then tested using a beam of 120 GeV/c pions. The ASIC contains a matrix of 100 \mu m pitch hexagonal pixels, readout out by low noise and very fast frontend electronics produced in a 130 nm SiGe BiCMOS technology process. The dependence on the proton fluence of the efficiency and the time resolution of this prototype was measured with the frontend electronics operated at a power density between 0.13 and 0.9 W/cm2. The testbeam data show that the detection efficiency of 99.96% measured at sensor bias voltage of 200 V before irradiation becomes 96.2% after a fluence of 1 x 1016 neq/cm2. An increase of the sensor bias voltage to 300 V provides an efficiency to 99.7% at that proton fluence. The timing resolution of 20 ps measured before irradiation rises for a proton fluence of 1 x 1016 neq/cm2 to 53 and 45 ps at HV = 200 and 300 V, respectively.

physics.ins-det↗

arXiv2023

Radiation Tolerance of SiGe BiCMOS Monolithic Silicon Pixel Detectors without Internal Gain Layer

A monolithic silicon pixel prototype produced for the MONOLITH ERC Advanced project was irradiated with 70 MeV protons up to a fluence of 1 x 10^16 1 MeV n_eq/cm^2. The ASIC contains a matrix of hexagonal pixels with 100 μm pitch, readout by low-noise and very fast SiGe HBT frontend electronics. Wafers with 50 μm thick epilayer with a resistivity of 350 Ωcm were used to produce a fully depleted sensor. Laboratory tests conducted with a 90Sr source show that the detector works satisfactorily after irradiation. The signal-to-noise ratio is not seen to change up to fluence of 6 x 10^14 n_eq /cm^2 . The signal time jitter was estimated as the ratio between the voltage noise and the signal slope at threshold. At -35 {^\circ}C, sensor bias voltage of 200 V and frontend power consumption of 0.9 W/cm^2, the time jitter of the most-probable signal amplitude was estimated to be 21 ps for proton fluence up to 6 x 10 n_eq/cm^2 and 57 ps at 1 x 10^16 n_eq/cm^2 . Increasing the sensor bias to 250 V and the analog voltage of the preamplifier from 1.8 to 2.0 V provides a time jitter of 40 ps at 1 x 10^16 n_eq/cm^2.

physics.ins-det↗

arXiv2023

Mono and stereo performance of the two SST-1M telescope prototypes

The Single-Mirror Small-Sized Telescope, or SST-1M, was originally developed as a prototype of a small-sized telescope for CTA, designed to form an array for observations of gamma-ray-induced atmospheric showers for energies above 3 TeV. A pair of SST-1M telescopes is currently being commissioned at the Ondrejov Observatory in the Czech Republic, and the telescope capabilities for mono and stereo observations are being tested in better astronomical conditions. The final location for the telescopes will be decided based on these tests. In this contribution, we present a data analysis pipeline called sst1mpipe, and the performance of the telescopes when working independently and in a stereo regime.

astro-ph.IM↗

arXiv2023

20 ps Time Resolution with a Fully-Efficient Monolithic Silicon Pixel Detector without Internal Gain Layer

A second monolithic silicon pixel prototype was produced for the MONOLITH project. The ASIC contains a matrix of hexagonal pixels with 100 μm pitch, readout by a low-noise and very fast SiGe HBT frontend electronics. Wafers with 50 μm thick epilayer of 350 Ωcm resistivity were used to produce a fully depleted sensor. Laboratory and testbeam measurements of the analog channels present in the pixel matrix show that the sensor has a 130 V wide bias-voltage operation plateau at which the efficiency is 99.8%. Although this prototype does not include an internal gain layer, the design optimised for timing of the sensor and the front-end electronics provides a time resolutions of 20 ps.

physics.ins-det↗

arXiv2023

SuperFGD prototype time resolution studies

The SuperFGD will be a part of the ND280 near detector of the T2K and Hyper Kamiokande projects, that will help to reduce systematic uncertainties related with neutrino flux and cross-section modeling. The upgraded ND280 will be able to perform a full exclusive reconstruction of the final state from neutrino-nucleus interactions, including measurements of low momentum protons, pions and, for the first time, event-by event measurements of neutron kinematics. The time resolution defines the neutron energy resolution. We present the results of time resolution measurements made with the SuperFGD prototype that consists of 9216 plastic scintillator cubes (cube size is 1 cm$^3$) readout with 1728 wavelength-shifting fibers going along three orthogonal directions. We use data from the muon beam exposure at CERN. The time resolution of 0.97 ns was obtained for one readout channel after implementing the time calibration with a correction for the time-walk effect. The time resolution improves with energy deposited in a scintillator cube. Averaging two readout channels for one scintillator cube improves the time resolution to 0.68 ns which means that signals in different channels are not synchronous. Therefore the contribution from the time recording step of 2.5 ns is averaged as well. Averaging time values from N channels improves the time resolution by $\sim 1/\sqrt{N}$. Therefore a very good time resolution should be achievable for neutrons since neutron recoils hit typically several scintillator cubes and in addition produce larger amplitudes than muons. Measurements performed with a laser and a wide-bandwidth oscilloscope demonstrated that the time resolution obtained with the muon beam is not far from its expected limit. The intrinsic time resolution of one channel is 0.67 ns for signals of 56 photo-electron typical for minimum ionizing particles.

physics.ins-det↗

arXiv2022

Picosecond Avalanche Detector -- working principle and gain measurement with a proof-of-concept prototype

The Picosecond Avalanche Detector is a multi-junction silicon pixel detector based on a $\mathrm{(NP)_{drift}(NP)_{gain}}$ structure, devised to enable charged-particle tracking with high spatial resolution and picosecond time-stamp capability. It uses a continuous junction deep inside the sensor volume to amplify the primary charge produced by ionizing radiation in a thin absorption layer. The signal is then induced by the secondary charges moving inside a thicker drift region. A proof-of-concept monolithic prototype, consisting of a matrix of hexagonal pixels with 100 $μ$m pitch, has been produced using the 130 nm SiGe BiCMOS process by IHP microelectronics. Measurements on probe station and with a $^{55}$Fe X-ray source show that the prototype is functional and displays avalanche gain up to a maximum electron gain of 23. A study of the avalanche characteristics, corroborated by TCAD simulations, indicates that space-charge effects due to the large primary charge produced by the conversion of X-rays from the $^{55}$Fe source limits the effective gain.

physics.ins-det↗

arXiv2022

Testbeam Results of the Picosecond Avalanche Detector Proof-Of-Concept Prototype

The proof-of-concept prototype of the Picosecond Avalanche Detector, a multi-PN junction monolithic silicon detector with continuous gain layer deep in the sensor depleted region, was tested with a beam of 180 GeV pions at the CERN SPS. The prototype features low noise and fast SiGe BiCMOS frontend electronics and hexagonal pixels with 100 μm pitch. At a sensor bias voltage of 125 V, the detector provides full efficiency and average time resolution of 30, 25 and 17 ps in the overall pixel area for a power consumption of 0.4, 0.9 and 2.7 W/cm^2, respectively. In this first prototype the time resolution depends significantly on the distance from the center of the pixel, varying at the highest power consumption measured between 13 ps at the center of the pixel and 25 ps in the inter-pixel region.

physics.ins-det↗

arXiv2022

Efficiency and time resolution of monolithic silicon pixel detectors in SiGe BiCMOS technology

A monolithic silicon pixel detector prototype has been produced in the SiGe BiCMOS SG13G2 130 nm node technology by IHP. The ASIC contains a matrix of hexagonal pixels with pitch of approximately 100 $μ$m. Three analog pixels were calibrated in laboratory with radioactive sources and tested in a 180 GeV/c pion beamline at the CERN SPS. A detection efficiency of $\left(99.9^{+0.1}_{-0.2}\right)$% was measured together with a time resolution of $(36.4 \pm 0.8)$ps at the highest preamplifier bias current working point of 150 $μ$A and at a sensor bias voltage of 160 V. The ASIC was also characterized at lower bias voltage and preamplifier current.

physics.ins-det↗

arXiv2021

A 4pi time-of-flight detector for the ND280/T2K upgrade

ND280 is a near detector of the T2K experiment which is located in the J-PARC accelerator complex in Japan. After a decade of fruitful data-taking, ND280 is scheduled for upgrade. The time-of-flight (ToF) detector, which is described in this article, is one of three new detectors that will be installed in the basket of ND280. The ToF detector has a modular structure. Each module represents an array of 20 plastic scintillator bars which are stacked in a plane of 2.4 x 2.2 m2 area. Six modules of similar construction will be assembled in a cube, thus providing an almost 4pi enclosure for an active neutrino target and two TPCs. The light emitted by scintillator is absorbed by arrays of large-area silicon photo-multipliers (SiPMs) which are attached to both ends of every bar. The readout of SiPMs, shaping and analog sum of individual SiPM signals within the array are performed by a discrete circuit amplifier. An average time resolution of about 0.14 ns is achieved for a single bar when measured with cosmic muons. The detector will be installed in the basket of ND280, where it will be used to veto particle originating outside the neutrino target, improve the particle identification and provide a cosmic trigger for calibration of detectors which are enclosed inside it.

physics.ins-det↗