arXiv subjects

Yang Su

Publications and source records attributed to Yang Su.

At least 145 records · Page 8Linked to original sources

arXiv2021

ReaDmE: Read-Rate Based Dynamic Execution Scheduling for Intermittent RF-Powered Devices

This paper presents a method for remotely and dynamically determining the execution schedule of long-running tasks on intermittently powered devices such as computational RFID. Our objective is to prevent brown-out events caused by sudden power-loss due to the intermittent nature of the powering channel. We formulate, validate and demonstrate that the read-rate measured from an RFID reader (number of successful interrogations per second) can provide an adequate means of estimating the powering channel condition for passively powered CRFID devices. This method is attractive because it can be implemented without imposing an added burden on the device or requiring additional hardware. We further propose ReaDmE, a dynamic execution scheduling scheme to mitigate brownout events to support long-run execution of complex tasks, such as cryptographic algorithms, on CRFID. Experimental results demonstrate that the ReaDmE method can improve CRFID's long-run execution success rate by 20% at the critical operational range or reduce time overhead by up to 23% compared to previous execution scheduling methods.

cs.PF↗

arXiv2021

On the Beam Filling Factors of Molecular Clouds

Imaging surveys of CO and other molecular transition lines are fundamental to measuring the large-scale distribution of molecular gas in the Milky Way. Due to finite angular resolution and sensitivity, however, observational effects are inevitable in the surveys, but few studies are available on the extent of uncertainties involved. The purpose of this work is to investigate the dependence of observations on angular resolution (beam sizes), sensitivity (noise levels), distances, and molecular tracers. To this end, we use high-quality CO images of a large-scale region (25.8 <l< 49.7 deg and |b|<5 deg) mapped by the Milky Way Imaging Scroll Painting (MWISP) survey as a benchmark to simulate observations with larger beam sizes and higher noise levels, deriving corresponding beam filling and sensitivity clip factors. The sensitivity clip factor is defined to be the completeness of observed flux. Taking the entire image as a whole object, we found that 12CO has the largest beam filling and sensitivity clip factors and C18O has the lowest. For molecular cloud samples extracted from images, the beam filling factor can be described by a characteristic size, $l_{1/4}$=0.762 (in beam size), at which the beam filling factor is approximately 1/4. The sensitivity clip factor shows a similar relationship but is more correlated with the mean voxel signal-to-noise ratio of molecular clouds. This result may serve as a practical reference on beam filling and sensitivity clip factors in further analyses of the MWISP data and other observations.

astro-ph.GA↗

arXiv2020

Distances to molecular clouds in the second Galactic quadrant

We present distances to 76 medium-sized molecular clouds and an extra large-scale one in the second Galactic quadrant ($104.75^\circ <l<150.25^\circ $ and $|b|<5.25^\circ$), 73 of which are accurately measured for the first time. Molecular cloud samples are drawn from $l$-$b$-$V$ space ($-95 < V_{\rm LSR}< 25$ \kms) with the density-based spatial clustering of applications with noise (DBSCAN) algorithm, and distances are measured with the background-eliminated extinction-parallax (BEEP) method using extinctions and Gaia DR2 parallaxes. The range of measured distances to 76 molecular clouds is from 211 to 2631 pc, and the extra large-scale molecular cloud appears to be a coherent structure at about 1 kpc, across about 40° ($\sim$700 pc) in the Galactic longitude.

astro-ph.GA↗

arXiv2020

Gamma-ray heartbeat powered by the microquasar SS 433

Microquasars, the local siblings of extragalactic quasars, are binary systems comprising a compact object and a companion star. By accreting matter from their companions, microquasars launch powerful winds and jets, influencing the interstellar environment around them. Steady gamma-ray emission is expected to rise from their central objects, or from interactions between their outflows and the surrounding medium. The latter prediction was recently confirmed with the detection of SS 433 at high (TeV) energies. In this report, we analyze more than ten years of GeV gamma-ray data from the Fermi Gamma-ray Space Telescope on this source. Detailed scrutiny of the data reveal emission in the SS 433 vicinity, co-spatial with a gas enhancement, and hints for emission possibly associated with a terminal lobe of one of the jets. Both gamma-ray excesses are relatively far from the central binary, and the former shows evidence for a periodic variation at the precessional period of SS 433, linking it with the microquasar. This result challenges obvious interpretations and is unexpected from any previously published theoretical models. It provides us with a chance to unveil the particle transport from SS 433 and to probe the structure of the local magnetic field in its vicinity.

astro-ph.HE↗

arXiv2020

SNR G39.2-0.3, an Hadronic Cosmic Rays Accelerator

Recent results obtained with gamma-ray satellites have established supernova remnants as accelerators of GeV hadronic cosmic rays. In such processes, CRs accelerated in SNR shocks interact with particles from gas clouds in their surrounding. In particular, the rich medium in which core-collapse SNRs explode provides a large target density to boost hadronic gamma-rays. SNR G39.2-0.3 is one of the brightest SNR in infrared wavelengths, and its broad multiwavelength coverage allows detailed modelling of its radiation from radio to high energies. We reanalyzed the Fermi-LAT data on this region and compare it with new radio observations from the MWISP survey. The modelling of the spectral energy distribution from radio to GeV energies favors a hadronic origin of the gamma-ray emission and constrains the SNR magnetic field to be at least ~100 uG. Despite the large magnetic field, the present acceleration of protons seems to be limited to ~10 GeV, which points to a drastic slow down of the shock velocity due to the dense wall traced by the CO observations, surrounding the remnant. Further investigation of the gamma-ray spectral shape points to a dynamically old remnant subjected to severe escape of CRs and a decrease of acceleration efficiency. The low-energy peak of the gamma-ray spectrum also suggests that that the composition of accelerated particles might be enriched by heavy nuclei which is certainly expected for a core-collapse SNR. Alternatively, the contribution of the compressed pre-existing Galactic cosmic rays is discussed, which is, however, found to not likely be the dominant process for gamma-ray production.

astro-ph.HE↗

arXiv2020

The turbulent gas structure in the centers of NGC253 and the Milky Way

We compare molecular gas properties in the starbursting center of NGC253 and the Milky Way Galactic Center (GC) on scales of ~1-100 pc using dendograms and resolution-, area- and noise-matched datasets in CO (1-0) and CO (3-2). We find that the size-line width relations in NGC253 and the GC have similar slope, but NGC253 has larger line widths by factors of ~2-3. The $σ^2/R$ dependency on column density shows that, in the GC, on scales of 10-100 pc the kinematics of gas over $N>3\times10^{21}$ cm$^{-2}$ are compatible with gravitationally bound structures. In NGC253 this is only the case for column densities $N>3\times10^{22}$ cm$^{-2}$. The increased line widths in NGC253 originate in the lower column density gas. This high-velocity dispersion, not gravitationally self-bound gas is likely in transient structures created by the combination of high average densities and feedback in the starburst. The high densities turns the gas molecular throughout the volume of the starburst, and the injection of energy and momentum by feedback significantly increases the velocity dispersion at a given spatial scale over what is observed in the GC.

astro-ph.GA↗

arXiv2020

Thermodynamical Evolution of Supra-Arcade Downflows

Supra-arcade downflows (SADs) are dark, teardrop-shaped features descending upon flare arcades. They are thought to be the results of magnetic reconnection, but the detailed formation mechanism of SADs and their relationship to flare energy release are still unclear. In this work, we explore the thermodynamical properties of SADs in the 2011 October 22 limb flare using the observations of the Solar Dynamics Observatory/Atmospheric Imaging Assembly and an improved Differential Emission Measure (DEM) technique. Different heating events around SADs are identified and the propagation speeds of plasma heating are calculated. The first heating event starts with the increase of the emission measure at temperatures higher than 5 MK, about 2.8 minutes before the arrival of the first studied SAD. Its propagation speed is about 140 km/s, a little faster than the speed of the SAD. However, the other two events have fast propagation speeds more than 700 km/s. We suspect that the first heating event can be explained by adiabatic compression, but the others may have different causes. Besides, we observed that SADs can push away their surrounding spikes. The formation of SADs is further explained on the basis of patchy and bursty magnetic reconnection that reconnection outflows may push away surrounding plasma and leave dark lanes behind them. The reliability of the DEM results, heating and cooling mechanisms, and other SAD explanations are discussed.

astro-ph.SR↗

arXiv2020

Molecular Clouds Surrounding Supernova Remnant G43.9+1.6: Associated and Non-associated

Many supernova remnants (SNRs) are considered to evolve in molecular environments, but the associations between SNRs and molecular clouds (MCs) are often unclear. Being aware of such ambiguous case, we report our study on the molecular environment towards the SNR G43.9+1.6 by CO line observations. We investigated the correlations between the SNR and MCs at different velocities, and found two velocity components, i.e. $\sim$5 km s$^{-1}$ and $\sim$50 km s$^{-1}$ velocity components, showing spatial correlations with the remnant. However, no dynamical evidence of disturbance was found for the $\sim$5 km s$^{-1}$ velocity component. At the distance of the $\sim$5 km s$^{-1}$ velocity component, either near or far distance, the derived physical parameters are unreasonable too. We conclude that the SNR is not associated with the $\sim$5 km s$^{-1}$ velocity component, and their spatial correlation is just a chance correlation. For the $\sim$50 km s$^{-1}$ velocity component, dynamical evidence of disturbances, as well as the spatial correlation, indicate that it is associated with the SNR. We found that all the CO spectra extracted from the molecular clumps distributed along the border of the remnant are with broadened components presented, which can be fitted by Gaussian functions. By further analysis, we suggest that the SNR is at a near kinematic distance of about 3.1 kpc.

astro-ph.HE↗

arXiv2020

Distances and statistics of local molecular clouds in the first Galactic quadrant

We present an analysis of local molecular clouds (-6 <VLSR< 30 km/s, i.e., <1.5 kpc) in the first Galactic quadrant (25.8° <l<49.7° and |b|<5°), a pilot region of the Milky Way Imaging Scroll Painting (MWISP) CO survey. Using the SCIMES algorithm to divide large molecular clouds into moderate-sized ones, we determined distances to 28 molecular clouds with the background-eliminated extinction-parallax (BEEP) method using the Gaia DR2 parallax measurements aided by AG and AV, and the distance ranges from 250 pc to about 1.5 kpc. These incomplete distance samples indicate a linear relationship between the distance and the radial velocity (VLSR) with a scatter of 0.16 kpc, and kinematic distances may be systematically larger for local molecular clouds. In order to investigate fundamental properties of molecular clouds, such as the total sample number, the linewidth, the brightness temperature, the physical area, and the mass, we decompose the spectral cube using the DBSCAN algorithm. Post selection criteria are imposed on DBSCAN clusters to remove the noise contamination, and we found that the separation of molecular cloud individuals is reliable based on a definition of independent consecutive structures in l-b-V space. The completeness of the local molecular cloud flux collected by the MWISP CO survey is about 80%. The physical area, A, shows a power-law distribution, dN/dA \propto A^{-2.20+/-0.18}, while the molecular cloud mass also follows a power-law distribution but slightly flatter, dN/dM \propto M^{-1.96+/-0.11}.

astro-ph.GA↗

arXiv2020

An ultra-long and quite thin coronal loop without significant expansion

Context. Coronal loops are the basic building blocks of the solar corona, which are related to the mass supply and heating of solar plasmas in the corona. However, their fundamental magnetic structures are still not well understood. Most coronal loops do not expand significantly, whereas the diverging magnetic field would have an expansion factor of about 5-10 over one pressure scale height. Aims. In this study, we investigate a unique coronal loop with a roughly constant cross section, it is ultra long and quite thin. A coronal loop model with magnetic helicity is presented to explain the small expansion of the loop width. Methods. This coronal loop was predominantly detectable in the 171 A channel of the Atmospheric Imaging Assembly (AIA). Then, the local magnetic field line was extrapolated by a Potential-Field-Source-Surface model. Finally, the differential emission measure analysis made from six AIA bandpasses was applied to obtain the thermal properties of this loop. Results. This coronal loop has a projected length of roughly 130 Mm, a width of about 1.5 +(-) 0.5 Mm and a lifetime of around 90 minutes. It follows an open magnetic field line. The cross section expanded very little (i.e., 1.5-2.0) along the loop length during its whole lifetime. This loop has a nearly constant temperature at about 0.7 +(-) 0.2 MK, whereas its density exhibits the typical structure of a stratified atmosphere. Conclusions. We use a thin twisted flux tube theory to construct a model for this non-expanding loop, and find that indeed with sufficient twist a coronal loop can attain equilibrium. However, we can not rule out other possibilities such as footpoint heating by small-scale reconnection, elevated scale height by a steady flow along the loop etc.

astro-ph.SR↗

arXiv2020

Local Molecular Gas toward the Aquila Rift Region

We present the results of a ~250 square degrees CO mapping (+26d 4.1x10^5 Msun in the whole region. In fact, the mass of the molecular gas is dominated by the W40 giant molecular cloud (GMC) at ~474 pc (~1.4x10^5 Msun) and the GMC complex G036.0+01.0 at ~560-670 pc (~2.0x10^5 Msun), while the MCs at ~220-260pc have gas masses of 10^2-10^3 Msun. Interestingly, an ~80pc long filamentary MC G044.0-02.5 at a distance of ~404 pc shows a systematic velocity gradient along and perpendicular to the major axis of the filament. The HI gas with the enhanced emission has the similar spatial morphologies and velocity features compared to the corresponding CO structure, indicating that the large-scale converging HI flows are probably responsible for the formation of the MC. Meanwhile, the long filamentary MC consists of many sub-filaments with the lengths ranging from ~0.5 pc to several pc, as well as prevalent networks of filaments in other large-scale local MCs.

astro-ph.SR↗

arXiv2020

A Cold and Diffuse Giant Molecular Filament in the Region of $l=41^\circ$, $b=-1^\circ$

Data of $^{12}$CO/$^{13}$CO/C$^{18}$O $J=1\to0$ emission toward the Galactic plane region of $l=35^\circ$ to $45^\circ$ and $b= -5^\circ$ to $+5^\circ$ are available with the Milky Way Imaging Scroll Painting (MWISP) project. Using the data, we found a giant molecular filament (GMF) around $l\approx38\sim42^\circ$, $b\approx-3.5\sim0^\circ$, $V_{LSR} \approx 27 \sim 40$ km~s$^{-1}$, named the GMF MWISP G041-01. At a distance of 1.7 kpc, the GMF is about 160 pc long. With a median excitation temperature about 7.5 K and a median column density about $10^{21}$ cm$^{-2}$, this GMF is very cold and very diffuse compared to known GMFs. Using the morphology in the data cube, the GMF is divided into four components among which three show filamentary structure. Masses of the components are $ 10^3 \sim 10^4 M_\odot$, with a total mass for the whole filament being about $7\times10^4 M_\odot$ from the LTE method. $^{13}$CO cores inside each component are searched. Virial parameters are about 2.5 for these cores and have a power-law index of -0.34 against the mass. The mass fraction of dense cores traced by $^{13}$CO to the diffuse clouds traced by $^{12}$CO are about 7% for all components of the GMF. We found signatures of possible large scale filament-filament collision in the GMF.

astro-ph.GA↗

arXiv2020

An Impedance Sensing Platform for Monitoring Heterogeneous Connectivity and Diagnostics in Lab-on-a-Chip Systems

Reliable hardware connectivity is vital in heterogeneous integrated systems. For example, in digital microfluidics lab-on-a-chip systems, there are hundreds of physical connections required between a micro-electro-mechanical fabricated device and the driving system that can be remotely located on a printed-circuit-board. Unfortunately, the connection reliability cannot be checked or monitored by vision-based detection methods that are commonly used in the semiconductor industry. Therefore, a sensing platform that can be seamlessly integrated into existing digital microfluidics systems and provide real-time monitoring of multi-connectivity is highly desired. Here, we report an impedance sensing platform that can provide fast detection of a single physical connection in timescales of milli-seconds. Once connectivity is established, the same set-up can be used to determine droplet location. The sensing system can be scaled up to support multiple channels or applied to other heterogeneously integrated systems that require real-time monitoring and diagnostics of multi-connectivity systems.

eess.SY↗

arXiv2020

Searching for Molecular Outflows with Support Vector Machines: Dark Cloud Complex in Cygnus

We present a survey of molecular outflows across the dark cloud complex in the Cygnus region, based on 46.75 deg^2 field of CO isotopologues data from Milky Way Imaging Scroll Painting (MWISP) survey. A supervised machine learning algorithm, Support Vector Machine (SVM), is introduced to accelerate our visual assessment of outflow features in the data cube of 12CO and 13CO J = 1-0 emission. A total of 130 outflow candidates are identified, of which 77 show bipolar structures and 118 are new detections. Spatially, these outflows are located inside dense molecular clouds and some of them are found in clusters or in elongated linear structures tracing the underlying gas filament morphology. Along the line of sight, 97, 31, and 2 candidates reside in the Local, Perseus, and Outer arm, respectively. Young stellar objects as outflow drivers are found near most outflows, while 36 candidates show no associated source. The clusters of outflows that we detect are inhomogeneous in their properties; nevertheless, we show that the outflows cannot inject turbulent energy on cloud scales. Instead, at best, they are restricted to affecting the so called "clump" and "core" scales, and this only on short (~0.3 Myr) estimated timescales. Combined with outflow samples in the literature, our work shows a tight outflow mass-size correlation.

astro-ph.SR↗

arXiv2020

A floating top-electrode electrowetting-on-dielectric system

Herein, we describe a novel device configuration for double-plate electrowetting-on-dielectric system with a floating top-electrode. As conventional double-plate EWOD device requires a grounded electrode on top-plate, it will cause additional fabrication complicity and cost during the encapsulation process. In this work, we found that by carefully designing electrode arrangement and configuring driving electronic circuit, the droplet driving force can be maintained with a floating electrode on the top-plate. This can provide the possibilities to integrate additional electrical or electrochemical sensing functions on the top-plate. We use both finite element analysis and fabricated system to validate the theory, and the results indicate that floating top-electrode EWOD systems are highly reliable and reproducible once the design considerations are fully met.

physics.app-ph↗

arXiv2020

Differential Emission Measure Plasma Diagnostics of a Long-Lived Coronal Hole

We use Solar Dynamics Observatory (SDO)/Atmospheric Imaging Assembly (AIA) data to reconstruct the plasma properties from differential emission measure (DEM) analysis for a previously studied long-lived, low-latitude coronal hole (CH) over its lifetime of ten solar rotations. We initially obtain a non-isothermal DEM distribution with a dominant component centered around 0.9 MK and a secondary smaller component at 1.5 - 2.0 MK. We find that deconvolving the data with the instrument point spread function (PSF) to account for long-range scattered light reduces the secondary hot component. Using the 2012 Venus transit and a 2013 lunar eclipse to test the efficiency of this deconvolution, significant amounts of residual stray light are found for the occulted areas. Accounting for this stray light in the error budget of the different AIA filters further reduces the secondary hot emission, yielding CH DEM distributions that are close to isothermal with the main contribution centered around 0.9 MK. Based on these DEMs, we analyze the evolution of the emission measure (EM), density, and averaged temperature during the CH's lifetime. We find that once the CH is clearly observed in EUV images, the bulk of the CH plasma reveals a quite constant state, i.e. temperature and density reveal no major changes, whereas the total CH area and the photospheric magnetic fine structure inside the CH show a distinct evolutionary pattern. These findings suggest that CH plasma properties are mostly "set" at the CH formation or/and that all CHs have similar plasma properties.

astro-ph.SR↗

arXiv2019

Free cyclic group actions on highly-connected $2n$-manifolds

In this paper we study smooth orientation-preserving free actions of the cyclic group $\mathbb Z/m$ on a class of $(n-1)$-connected $2n$-manifolds, $\sharp g (S^n \times S^n)\sharp Σ$, where $Σ$ is a homotopy $2n$-sphere. When $n=2$ we obtain a classification up to topological conjugation. When $n=3$ we obtain a classification up to smooth conjugation. When $n \ge 4$ we obtain a classification up to smooth conjugation when the prime factors of $m$ are larger than a constant $C(n)$.

math.GT↗

arXiv2019

A Hot Cusp-Shaped Confined Solar Flare

We analyze a confined flare that developed a hot cusp-like structure high in the corona (H ~ 66 Mm). A growing cusp-shaped flare arcade is a typical feature in the standard model of eruptive flares, caused by magnetic reconnection at progressively larger coronal heights. In contrast, we observe a static hot cusp during a confined flare. Despite an initial vertical temperature distribution similar to that in eruptive flares, we observe a distinctly different evolution during the late (decay) phase, in the form of prolonged hot emission. The distinct cusp shape, rooted at locations of non-thermal precursor activity, was likely caused by a magnetic field arcade that kinked near the top. Our observations indicate that the prolonged heating was a result of slow local reconnection and an increased thermal pressure near the kinked apexes due to continuous plasma upflows.

astro-ph.SR↗