arXiv subjects

Yansha Deng

Publications and source records attributed to Yansha Deng.

At least 73 records · Page 4Linked to original sources

arXiv2021

Learning-based Prediction, Rendering and Transmission for Interactive Virtual Reality in RIS-Assisted Terahertz Networks

The quality of experience (QoE) requirements of wireless Virtual Reality (VR) can only be satisfied with high data rate, high reliability, and low VR interaction latency. This high data rate over short transmission distances may be achieved via abundant bandwidth in the terahertz (THz) band. However, THz waves suffer from severe signal attenuation, which may be compensated by the reconfigurable intelligent surface (RIS) technology with programmable reflecting elements. Meanwhile, the low VR interaction latency may be achieved with the mobile edge computing (MEC) network architecture due to its high computation capability. Motivated by these considerations, in this paper, we propose a MEC-enabled and RIS-assisted THz VR network in an indoor scenario, by taking into account the uplink viewpoint prediction and position transmission, MEC rendering, and downlink transmission. We propose two methods, which are referred to as centralized online Gated Recurrent Unit (GRU) and distributed Federated Averaging (FedAvg), to predict the viewpoints of VR users. In the uplink, an algorithm that integrates online Long-short Term Memory (LSTM) and Convolutional Neural Networks (CNN) is deployed to predict the locations and the line-of-sight and non-line-of-sight statuses of the VR users over time. In the downlink, we further develop a constrained deep reinforcement learning algorithm to select the optimal phase shifts of the RIS under latency constraints. Simulation results show that our proposed learning architecture achieves near-optimal QoE as that of the genie-aided benchmark algorithm, and about two times improvement in QoE compared to the random phase shift selection scheme.

eess.SP↗

arXiv2021

Real-time Video Streaming and Control of Cellular-Connected UAV System: Prototype and Performance Evaluation

Unmanned aerial vehicles (UAVs) play an increasingly important role in military, public, and civilian applications, where providing connectivity to UAVs is crucial for its real-time control, video streaming, and data collection. Considering that cellular networks offer wide area, high speed, and secure wireless connectivity, cellular-connected UAVs have been considered as an appealing solution to provide UAV connectivity with enhanced reliability, coverage, throughput, and security. Due to the nature of UAVs mobility, the throughput, reliability and End-to-End (E2E) delay of UAVs communication under various flight heights, video resolutions, and transmission frequencies remain unknown. To evaluate these parameters, we develop a cellular-connected UAV testbed based on the Long Term Evolution (LTE) network with its uplink video transmission and downlink control\&command (CC) transmission. We also design algorithms for sending control signal and controlling UAV. The indoor experimental results provide fundamental insights for the cellular-connected UAV system design from the perspective of transmission frequency, adaptability, and link outage, respectively.

eess.SY↗

arXiv2021

A General Deep Reinforcement Learning Framework for Grant-Free NOMA Optimization in mURLLC

Grant-free non-orthogonal multiple access (GF-NOMA) is a potential technique to support massive Ultra-Reliable and Low-Latency Communication (mURLLC) service. However, the dynamic resource configuration in GF-NOMA systems is challenging due to random traffics and collisions, that are unknown at the base station (BS). Meanwhile, joint consideration of the latency and reliability requirements makes the resource configuration of GF-NOMA for mURLLC more complex. To address this problem, we develop a general learning framework for signature-based GF-NOMA in mURLLC service taking into account the multiple access signature collision, the UE detection, as well as the data decoding procedures for the K-repetition GF and the Proactive GF schemes. The goal of our learning framework is to maximize the long-term average number of successfully served users (UEs) under the latency constraint. We first perform a real-time repetition value configuration based on a double deep Q-Network (DDQN) and then propose a Cooperative Multi-Agent learning technique based on the DQN (CMA-DQN) to optimize the configuration of both the repetition values and the contention-transmission unit (CTU) numbers. Our results show that the number of successfully served UEs under the same latency constraint in our proposed learning framework is up to ten times for the K-repetition scheme, and two times for the Proactive scheme, more than that with fixed repetition values and CTU numbers. In addition, the superior performance of CMA-DQN over the conventional load estimation-based approach (LE-URC) demonstrates its capability in dynamically configuring in long term. Importantly, our general learning framework can be used to optimize the resource configuration problems in all the signature-based GF-NOMA schemes.

cs.IT↗

arXiv2021

Analyzing Uplink Grant-free Sparse Code Multiple Access System in Massive IoT Networks

Grant-free sparse code multiple access (GF-SCMA) is considered to be a promising multiple access candidate for future wireless networks. In this paper, we focus on characterizing the performance of uplink GF-SCMA schemes in a network with ubiquitous connections, such as the Internet of Things (IoT) networks. To provide a tractable approach to evaluate the performance of GF-SCMA, we first develop a theoretical model taking into account the property of multi-user detection (MUD) in the SCMA system. We then analyze the error rate performance of GF-SCMA in the case of codebook collision to investigate the reliability of GF-SCMA when reusing codebook in massive IoT networks. For performance evaluation, accurate approximations for both success probability and average symbol error probability (ASEP) are derived. To elaborate further, we utilize the analytical results to discuss the impact of codeword sparse degree in GFSCMA. After that, we conduct a comparative study between SCMA and its variant, dense code multiple access (DCMA), with GF transmission to offer insights into the effectiveness of these two schemes. This facilitates the GF-SCMA system design in practical implementation. Simulation results show that denser codebooks can help to support more UEs and increase the reliability of data transmission in a GF-SCMA network. Moreover, a higher success probability can be achieved by GFSCMA with denser UE deployment at low detection thresholds since SCMA can achieve overloading gain.

cs.IT↗

arXiv2021

Low-Complexity Robust Beamforming Design for IRS-Aided MISO Systems with Imperfect Channels

In this paper, large-scale intelligent reflecting sur-face (IRS)-assisted multiple-input single-output (MISO) system is considered in the presence of channel uncertainty. To maximize the average sum rate of the system by jointly optimizing the active beamforming at the BS and the passive phase shifts at the IRS, while satisfying the power constraints, a novel robust beamforming design is proposed by using the penalty dual decomposition (PDD) algorithm. By applying the upper bound maximization/minimization (BSUM) method, in each iteration of the algorithm, the optimal solution for each variable can be obtained with closed-form expression. Simulation results show that the proposed scheme achieves high performance with very low computational complexity.

eess.SP↗

arXiv2021

Machine Learning for Massive Industrial Internet of Things

Industrial Internet of Things (IIoT) revolutionizes the future manufacturing facilities by integrating the Internet of Things technologies into industrial settings. With the deployment of massive IIoT devices, it is difficult for the wireless network to support the ubiquitous connections with diverse quality-of-service (QoS) requirements. Although machine learning is regarded as a powerful data-driven tool to optimize wireless network, how to apply machine learning to deal with the massive IIoT problems with unique characteristics remains unsolved. In this paper, we first summarize the QoS requirements of the typical massive non-critical and critical IIoT use cases. We then identify unique characteristics in the massive IIoT scenario, and the corresponding machine learning solutions with its limitations and potential research directions. We further present the existing machine learning solutions for individual layer and cross-layer problems in massive IIoT. Last but not the least, we present a case study of massive access problem based on deep neural network and deep reinforcement learning techniques, respectively, to validate the effectiveness of machine learning in massive IIoT scenario.

cs.LG↗

arXiv2021

QoE Optimization for Live Video Streaming in UAV-to-UAV Communications via Deep Reinforcement Learning

A challenge for rescue teams when fighting against wildfire in remote areas is the lack of information, such as the size and images of fire areas. As such, live streaming from Unmanned Aerial Vehicles (UAVs), capturing videos of dynamic fire areas, is crucial for firefighter commanders in any location to monitor the fire situation with quick response. The 5G network is a promising wireless technology to support such scenarios. In this paper, we consider a UAV-to-UAV (U2U) communication scenario, where a UAV at a high altitude acts as a mobile base station (UAV-BS) to stream videos from other flying UAV-users (UAV-UEs) through the uplink. Due to the mobility of the UAV-BS and UAV-UEs, it is important to determine the optimal movements and transmission powers for UAV-BSs and UAV-UEs in real-time, so as to maximize the data rate of video transmission with smoothness and low latency, while mitigating the interference according to the dynamics in fire areas and wireless channel conditions. In this paper, we co-design the video resolution, the movement, and the power control of UAV-BS and UAV-UEs to maximize the Quality of Experience (QoE) of real-time video streaming. To learn the Deep Q-Network (DQN) and Actor-Critic (AC) to maximize the QoE of video transmission from all UAV-UEs to a single UAVBS. Simulation results show the effectiveness of our proposed algorithm in terms of the QoE, delay and video smoothness as compared to the Greedy algorithm.

eess.SP↗

arXiv2021

Learning based signal detection for MIMO systems with unknown noise statistics

This paper aims to devise a generalized maximum likelihood (ML) estimator to robustly detect signals with unknown noise statistics in multiple-input multiple-output (MIMO) systems. In practice, there is little or even no statistical knowledge on the system noise, which in many cases is non-Gaussian, impulsive and not analyzable. Existing detection methods have mainly focused on specific noise models, which are not robust enough with unknown noise statistics. To tackle this issue, we propose a novel ML detection framework to effectively recover the desired signal. Our framework is a fully probabilistic one that can efficiently approximate the unknown noise distribution through a normalizing flow. Importantly, this framework is driven by an unsupervised learning approach, where only the noise samples are required. To reduce the computational complexity, we further present a low-complexity version of the framework, by utilizing an initial estimation to reduce the search space. Simulation results show that our framework outperforms other existing algorithms in terms of bit error rate (BER) in non-analytical noise environments, while it can reach the ML performance bound in analytical noise environments. The code of this paper is available at https://github.com/skypitcher/manfe.

cs.LG↗

arXiv2020

Learning-based Prediction and Uplink Retransmission for Wireless Virtual Reality (VR) Network

Wireless Virtual Reality (VR) users are able to enjoy immersive experience from anywhere at anytime. However, providing full spherical VR video with high quality under limited VR interaction latency is challenging. If the viewpoint of the VR user can be predicted in advance, only the required viewpoint is needed to be rendered and delivered, which can reduce the VR interaction latency. Therefore, in this paper, we use offline and online learning algorithms to predict viewpoint of the VR user using real VR dataset. For the offline learning algorithm, the trained learning model is directly used to predict the viewpoint of VR users in continuous time slots. While for the online learning algorithm, based on the VR user's actual viewpoint delivered through uplink transmission, we compare it with the predicted viewpoint and update the parameters of the online learning algorithm to further improve the prediction accuracy. To guarantee the reliability of the uplink transmission, we integrate the Proactive retransmission scheme into our proposed online learning algorithm. Simulation results show that our proposed online learning algorithm for uplink wireless VR network with the proactive retransmission scheme only exhibits about 5% prediction error.

eess.SP↗

arXiv2020

RACH in Self-Powered NB-IoT Networks: Energy Availability and Performance Evaluation

NarrowBand-Internet of Things (NB-IoT) is a new 3GPP radio access technology designed to provide better coverage for a massive number of low-throughput low-cost devices in delay-tolerant applications with low power consumption. To provide reliable connections with extended coverage, a repetition transmission scheme is introduced to NB-IoT during both Random Access CHannel (RACH) procedure and data transmission procedure. To avoid the difficulty in replacing the battery for IoT devices, the energy harvesting is considered as a promising solution to support energy sustainability in the NB-IoT network. In this work, we analyze RACH success probability in a self-powered NB-IoT network taking into account the repeated preamble transmissions and collisions, where each IoT device with data is active when its battery energy is sufficient to support the transmission. We model the temporal dynamics of the energy level as a birth-death process, derive the energy availability of each IoT device, and examine its dependence on the energy storage capacity and the repetition value. We show that in certain scenarios, the energy availability remains unchanged despite randomness in the energy harvesting. We also derive the exact expression for the RACH success probability of a {randomly chosen} IoT device under the derived energy availability, which is validated under different repetition values via simulations. We show that the repetition scheme can efficiently improve the RACH success probability in a light traffic scenario, but only slightly improves that performance with very inefficient channel resource utilization in a heavy traffic scenario.

eess.SP↗

arXiv2020

A Vision of XR-aided Teleoperation System Towards 5G/B5G

Extended Reality (XR)-aided teleoperation has shown its potential in improving operating efficiency in mission-critical, rich-information and complex scenarios. The multi-sensory XR devices introduce several new types of traffic with unique quality-of-service (QoS) requirements, which are usually defined by three measures---human perception, corresponding sensors, and present devices. To fulfil these requirements, cellular-supported wireless connectivity can be a promising solution that can largely benefit the Robot-to-XR and the XR-to-Robot links. In this article, we present industrial and piloting use cases and identify the service bottleneck of each case. We then cover the QoS of Robot-XR and XR-Robot links by summarizing the sensors' parameters and processing procedures. To realise these use cases, we introduce potential solutions for each case with cellular connections. Finally, we build testbeds to investigate the effectiveness of supporting our proposed links using current wireless topologies.

eess.SP↗

arXiv2020

Analysis of Random Access in NB-IoT Networks with Three Coverage Enhancement Groups: A Stochastic Geometry Approach

NarrowBand-Internet of Things (NB-IoT) is a new 3GPP radio access technology designed to provide better coverage for Low Power Wide Area (LPWA) networks. To provide reliable connections with extended coverage, a repetition transmission scheme and up to three Coverage Enhancement (CE) groups are introduced into NB-IoT during both Random Access CHannel (RACH) procedure and data transmission procedure, where each CE group is configured with different repetition values and transmission resources. To characterize the RACH performance of the NB-IoT network with three CE groups, this paper develops a novel traffic-aware spatio-temporal model to analyze the RACH success probability, where both the preamble transmission outage and the collision events of each CE group jointly determine the traffic evolution and the RACH success probability. Based on this analytical model, we derive the analytical expression for the RACH success probability of a randomly chosen IoT device in each CE group over multiple time slots with different RACH schemes, including baseline, back-off (BO), access class barring (ACB), and hybrid ACB and BO schemes (ACB&BO). Our results have shown that the RACH success probabilities of the devices in three CE groups outperform that of a single CE group network but not for all the groups, which is affected by the choice of the categorizing parameters.This mathematical model and analytical framework can be applied to evaluate the performance of multiple group users of other networks with spatial separations.

eess.SP↗

arXiv2020

Digital Signal Processing for Molecular Communication via Chemical Reactions-based Microfluidic Circuits

Chemical reactions-based microfluidic circuits are expected to provide new opportunities to perform signal processing functions over molecular domain. To realize this vision, in this article, we exploit and present the digital signal processing capabilities of chemical reactions-based microfluidic circuits. Aiming to facilitate microfluidic circuit design, we describe a microfluidic circuit using a five-level architecture: 1) Molecular Propagation; 2) Chemical Transformation; 3) Microfluidic Modules; 4) Microfluidic Logic Gates; and 5) Microfluidic Circuits. We first identify the components at Levels 1 and 2, and present how their combinations can build the basic modules for Level 3. We then assemble basic modules to construct five types of logic gate for Level 4, including AND, NAND, OR, NOR, and XOR gates, which show advantages of microfluidic circuits in reusability and modularity. Last but not least, we discuss challenges and potential solutions for designing, building, and testing microfluidic circuits with complex signal processing functions in Level 5 based on the digital logic gates at Level 4.

cs.ET↗

arXiv2020

A Survey of Molecular Communication in Cell Biology: Establishing a New Hierarchy for Interdisciplinary Applications

Molecular communication (MC) engineering is inspired by the use of chemical signals as information carriers in cell biology. The biological nature of chemical signaling makes MC a promising methodology for interdisciplinary applications requiring communication between cells and other microscale devices. However, since the life sciences and communications engineering fields have distinct approaches to formulating and solving research problems, the mismatch between them can hinder the translation of research results and impede the development and implementation of interdisciplinary solutions. To bridge this gap, this survey proposes a novel communication hierarchy for MC signaling in cell biology and maps phenomena, contributions, and problems to the hierarchy. The hierarchy includes: 1) the Physical Signal Propagation level; 2) the Physical and Chemical Signal Interaction level; 3) the Signal-Data Interface level; 4) the Local Data Abstraction level; and 5) the Application level. To further demonstrate the proposed hierarchy, it is applied to case studies on quorum sensing, neuronal signaling, and communication via DNA. Finally, several open problems are identified for each level and the integration of multiple levels. The proposed hierarchy provides language for communication engineers to study and interface with biological systems, and also helps biologists to understand how communications engineering concepts can be exploited to interpret, control, and manipulate signaling in cell biology.

cs.ET↗

arXiv2020

Analyzing Grant-Free Access for URLLC Service

5G New Radio (NR) is expected to support new ultra-reliable low-latency communication (URLLC) service targeting at supporting the small packets transmissions with very stringent latency and reliability requirements. Current Long Term Evolution (LTE) system has been designed based on grantbased (GB) (i.e., dynamic grant) random access, which can hardly support the URLLC requirements. Grant-free (GF) (i.e., configured grant) access is proposed as a feasible and promising technology to meet such requirements, especially for uplink transmissions, which effectively saves the time of requesting/waiting for a grant. While some basic GF access features have been proposed and standardized in NR Release-15, there is still much space to improve. Being proposed as 3GPP study items, three GF access schemes with Hybrid Automatic Repeat reQuest (HARQ) retransmissions including Reactive, K-repetition, and Proactive, are analyzed in this paper. Specifically, we present a spatiotemporal analytical framework for the contention-based GF access analysis. Based on this framework, we define the latent access failure probability to characterize URLLC reliability and latency performances. We propose a tractable approach to derive and analyze the latent access failure probability of the typical UE under three GF HARQ schemes. Our results show that under shorter latency constraints, the Proactive scheme provides the lowest latent access failure probability, whereas, under longer latency constraints, the K-repetition scheme achieves the lowest latent access failure probability, which depends on K. If K is overestimated, the Proactive scheme provides lower latent access failure probability than the K-repetition scheme.

eess.SP↗

arXiv2020

Learning-based Prediction, Rendering and Association Optimization for MEC-enabled Wireless Virtual Reality (VR) Network

Wireless-connected Virtual Reality (VR) provides immersive experience for VR users from any-where at anytime. However, providing wireless VR users with seamless connectivity and real-time VR video with high quality is challenging due to its requirements in high Quality of Experience (QoE) and low VR interaction latency under limited computation capability of VR device. To address these issues,we propose a MEC-enabled wireless VR network, where the field of view (FoV) of each VR user can be real-time predicted using Recurrent Neural Network (RNN), and the rendering of VR content is moved from VR device to MEC server with rendering model migration capability. Taking into account the geographical and FoV request correlation, we propose centralized and distributed decoupled Deep Reinforcement Learning (DRL) strategies to maximize the long-term QoE of VR users under the VR interaction latency constraint. Simulation results show that our proposed MEC rendering schemes and DRL algorithms substantially improve the long-term QoE of VR users and reduce the VR interaction latency compared to rendering at VR devices

eess.SP↗

arXiv2020

Latency Minimization for Intelligent Reflecting Surface Aided Mobile Edge Computing

Computation off-loading in mobile edge computing (MEC) systems constitutes an efficient paradigm of supporting resource-intensive applications on mobile devices. However, the benefit of MEC cannot be fully exploited, when the communications link used for off-loading computational tasks is hostile. Fortunately, the propagation-induced impairments may be mitigated by intelligent reflecting surfaces (IRS), which are capable of enhancing both the spectral- and energy-efficiency. Specifically, an IRS comprises an IRS controller and a large number of passive reflecting elements, each of which may impose a phase shift on the incident signal, thus collaboratively improving the propagation environment. In this paper, the beneficial role of IRSs is investigated in MEC systems, where single-antenna devices may opt for off-loading a fraction of their computational tasks to the edge computing node via a multi-antenna access point with the aid of an IRS. Pertinent latency-minimization problems are formulated for both single-device and multi-device scenarios, subject to practical constraints imposed on both the edge computing capability and the IRS phase shift design. To solve this problem, the block coordinate descent (BCD) technique is invoked to decouple the original problem into two subproblems, and then the computing and communications settings are alternatively optimized using low-complexity iterative algorithms. It is demonstrated that our IRS-aided MEC system is capable of significantly outperforming the conventional MEC system operating without IRSs. Quantitatively, about $20~\%$ computational latency reduction is achieved over the conventional MEC system in a single cell of a $300~\rm{m}$ radius and $5$ active devices, relying on a $5$-antenna access point.

eess.SP↗

arXiv2020

Microfluidic QCSK Transmitter and Receiver Design for Molecular Communication

The design of components with molecular communication (MC) functionalities can bring an opportunity to enable some emerging applications in fields from personal healthcare to modern industry. In this paper, we propose the designs of the microfluidic transmitter and receiver with quadruple concentration shift keying (QCSK) modulation and demodulation functionalities. To do so, we first present an AND gate design, and then apply it to the QCSK transmitter and receiver design. The QCSK transmitter is capable of modulating two input signals to four different concentration levels, and the QCSK receiver can demodulate a received signal to two outputs. More importantly, we also establish a mathematical framework to theoretically characterize our proposed microfluidic circuits. Based on this, we first derive the output concentration distribution of our proposed AND gate design, and provide the insight into the selection of design parameters to ensure an exhibition of desired behaviour. We further derive the output concentration distributions of the QCSK transmitter and receiver. Simulation results obtained in COMSOL Multiphysics not only show the desired behaviour of all the proposed microfluidic circuits, but also demonstrate the accuracy of the proposed mathematical framework.

cs.ET↗