arXiv subjects

Yanxiang Wang

Publications and source records attributed to Yanxiang Wang.

16 recordsLinked to original sources

arXiv2026

LightFARM: Model Predictive Lighting Control with Battery-Free IoT for Energy-Efficient Indoor Farming

Lighting is the dominant energy load in indoor farming, yet most deployed systems still rely on fixed rule-based or schedule-based control. We present LightFARM, a predictive lighting control framework that couples crop illumination with battery-free sensing for more energy-efficient indoor farming. LightFARM combines finite-horizon predictive control with compact models of photosynthesis, thermal dynamics, and sensor energy state. The controller adjusts lighting intensity to balance photosynthetic benefit, electrical power consumption, thermal safety, and sensing-energy feasibility. A key design feature is that the same light-emitting diode (LED) fixtures serve both as the photosynthetic light source for crops and as a controllable energy source for self-powered sensor nodes. We implement LightFARM in a real indoor basil cultivation system and evaluate it through two independent 12-day cultivation trials. Compared with a conventional rule-based baseline, LightFARM reduces lighting energy consumption by approximately 41% and improves energy productivity from 36.1 to 52.9 $\mathrm{g\,kWh^{-1}}$ and from 41.1 to 60.2 $\mathrm{g\,kWh^{-1}}$ ($\approx 46.5\%$ on average). These results suggest that energy-cooperative predictive lighting control is a promising approach to improving indoor farming efficiency under practical resource constraints, while explicitly accounting for the trade-off between energy savings and crop yield.

eess.SP↗

arXiv2026

SweetFruit: A Two-Stage Mobile Sensing System for Real-Time Fruit Sugar Estimation

Accurate prediction of fruit sugar content is essential for quality control and market valuation in agriculture. Conventional measurement techniques rely on destructive, time-consuming processes (e.g., juicing and refractometry) or direct contact instruments, which hinder high-throughput operations. This paper introduces SweetFruit, a mobile two-stage system that leverages low-cost sensors to estimate fruit sugar content without contact. In Stage 1, we implement a lightweight 3D deep learning model (SF-PointNet) that uses point clouds from a Time-of-Flight (ToF) depth camera to classify fruit as high or low sugar. In Stage 2, a regression network (SF-Net) predicts the fruit's Brix value using measurements from a compact 18-channel near-infrared (NIR) spectrometer. The system uses simple off-the-shelf sensors (AS7265x NIR and Arducam ToF) with efficient processing pipelines for real-time execution on embedded platforms. Experiments on green 'Granny Smith' apples and strawberries demonstrate the system's effectiveness. Stage 1 achieves over 90% classification accuracy, enabling rapid prescreening, while Stage 2 delivers precise sugar estimates, with a root mean square error (RMSE) of 0.57 Brix, reducing error by 22% compared to using NIR sensing alone. SweetFruit offers a scalable, field-ready solution for rapid fruit quality screening, showcasing the benefits of task-specific multimodal sensing in mobile agricultural applications.

eess.SP↗

arXiv2026

SIGMA-ASL: Sensor-Integrated Multimodal Dataset for Sign Language Recognition

Automatic sign language recognition (SLR) has become a key enabler of inclusive human-computer interaction, fostering seamless communication between deaf individuals and hearing communities. Despite significant advances in multimodal learning, existing SLR research remains dominated by vision-based datasets, which are limited by sensitivity to lighting and occlusion, privacy concerns, and a lack of cross-modal diversity. To address these challenges, we introduce SIGMA-ASL, a large-scale multimodal dataset for SLR. The dataset integrates an Azure Kinect RGB-D camera, a millimeter-wave (mmWave) radar, and two wrist-worn inertial measurement units (IMUs) to capture complementary visual, radio-reflection, and kinematic information. Collected in a controlled studio environment with 20 participants performing 160 common American sign language (ASL) signs, SIGMA-ASL provides 93,545 temporally synchronized word-level multimodal clips. A unified sensing framework achieves millisecond-level alignment across modalities, enabling reliable sensor fusion and cross-modal learning. We further design standardized preprocessing pipelines and benchmarking protocols under both user-dependent and user-independent settings, offering a comprehensive foundation for evaluating single and multimodal SLR. Extensive experiments validate the dataset's quality and demonstrate its potential as a valuable resource for developing robust, privacy-preserving, and ubiquitous sign language recognition systems.

cs.HC↗

arXiv2025

Scale What Counts, Mask What Matters: Evaluating Foundation Models for Zero-Shot Cross-Domain Wi-Fi Sensing

While Wi-Fi sensing offers a compelling, privacy-preserving alternative to cameras, its practical utility has been fundamentally undermined by a lack of robustness across domains. Models trained in one setup fail to generalize to new environments, hardware, or users, a critical "domain shift" problem exacerbated by modest, fragmented public datasets. We shift from this limited paradigm and apply a foundation model approach, leveraging Masked Autoencoding (MAE) style pretraining on the largest and most heterogeneous Wi-Fi CSI datasets collection assembled to date. Our study pretrains and evaluates models on over 1.3 million samples extracted from 14 datasets, collected using 4 distinct devices across the 2.4/5/6 GHz bands and bandwidths from 20 to 160 MHz. Our large-scale evaluation is the first to systematically disentangle the impacts of data diversity versus model capacity on cross-domain performance. The results establish scaling trends on Wi-Fi CSI sensing. First, our experiments show log-linear improvements in unseen domain performance as the amount of pretraining data increases, suggesting that data scale and diversity are key to domain generalization. Second, based on the current data volume, larger model can only provide marginal gains for cross-domain performance, indicating that data, rather than model capacity, is the current bottleneck for Wi-Fi sensing generalization. Finally, we conduct a series of cross-domain evaluations on human activity recognition, human gesture recognition and user identification tasks. The results show that the large-scale pretraining improves cross-domain accuracy ranging from 2.2% to 15.7%, compared to the supervised learning baseline. Overall, our findings provide insightful direction for designing future Wi-Fi sensing systems that can eventually be robust enough for real-world deployment.

cs.CV↗

arXiv2025

CARTS: Cooperative and Adaptive Resource Triggering and Stitching for 5G ISAC

This paper presents CARTS, an adaptive 5G uplink sensing scheme designed to provide Integrated Sensing and Communication (ISAC) services. The performance of both communication and sensing fundamentally depends on the availability of accurate and up-to-date channel state information (CSI). In modern 5G networks, uplink CSI is derived from two reference signals: the demodulation reference signal (DMRS) and the sounding reference signal (SRS). However, current base station implementations treat these CSI measurements as separate information streams. The key innovation of CARTS is to fuse these two CSI streams, thereby increasing the frequency of CSI updates and extending sensing opportunities to more users. CARTS addresses two key challenges: (i) a novel channel stitching and compensation method that integrates asynchronous CSI estimates from DMRS and SRS, despite their different time and frequency allocations, and (ii) a real-time SRS triggering algorithm that complements the inherently uncontrollable DMRS schedule, ensuring sufficient and non-redundant sensing opportunities for all users. Our trace-driven evaluation shows that CARTS significantly improves scalability, achieving a channel estimation error (NMSE) of 0.167 and UE tracking accuracy of 85 cm while supporting twice the number of users as a periodic SRS-only baseline with similar performance. By opportunistically combining DMRS and SRS, CARTS therefore provides a practical, standard-compliant solution to improve CSI availability for ISAC without requiring additional radio resources.

cs.NI↗

arXiv2025

mmMirror: Device Free mmWave Indoor NLoS Localization Using Van-Atta-Array IRS

Industry 4.0 is transforming manufacturing and logistics by integrating robots into shared human environments, such as factories, warehouses, and healthcare facilities. However, the risk of human-robot collisions, especially in Non-Line-of-Sight (NLoS) scenarios like around corners, remains a critical challenge. Existing solutions, such as vision-based and LiDAR systems, often fail under occlusion, lighting constraints, or privacy concerns, while RF-based systems are limited by range and accuracy. To address these limitations, we propose mmMirror, a novel system leveraging a Van Atta Array-based millimeter-wave (mmWave) reconfigurable intelligent reflecting surface (IRS) for precise, device-free NLoS localization. mmMirror integrates seamlessly with existing frequency-modulated continuous-wave (FMCW) radars and offers: (i) robust NLoS localization with centimeter-level accuracy at ranges up to 3 m, (ii) seamless uplink and downlink communication between radar and IRS, (iii) support for multi-radar and multi-target scenarios via dynamic beam steering, and (iv) reduced scanning latency through adaptive time slot allocation. Implemented using commodity 24 GHz radars and a PCB-based IRS prototype, mmMirror demonstrates its potential in enabling safe human-robot interactions in dynamic and complex environments.

cs.NI↗

arXiv2025

Solar-CSK: Decoding Color Coded Visible Light Communications using Solar Cells

Visible Light Communication (VLC) provides an energy-efficient wireless solution by using existing LED-based illumination for high-speed data transmissions. Although solar cells offer the advantage of simultaneous energy harvesting and data reception, their broadband nature hinders accurate decoding of color-coded signals like Color Shift Keying (CSK). In this paper, we propose a novel approach exploiting the concept of tandem solar cells, multi-layer devices with partial wavelength selectivity, to capture coarse color information without resorting to energy-limiting color filters. To address the residual spectral overlap, we develop a bidirectional LSTM-based machine learning framework that infers channel characteristics by comparing solar cells' photovoltaic signals with pilot-based anchor data. Our commercial off-the-shelf (COTS) solar prototype achieves robust performance across varying distances and ambient lighting levels, significantly reducing bit error rates compared to conventional channel estimation methods. These findings mark a step toward sustainable, high-performance VLC systems powered by the multi-layer solar technologies.

cs.NI↗

arXiv2025

N$^2$LoS: Single-Tag mmWave Backscatter for Robust Non-Line-of-Sight Localization

The accuracy of traditional localization methods significantly degrades when the direct path between the wireless transmitter and the target is blocked or non-penetrable. This paper proposes N2LoS, a novel approach for precise non-line-of-sight (NLoS) localization using a single mmWave radar and a backscatter tag. N2LoS leverages multipath reflections from both the tag and surrounding reflectors to accurately estimate the targets position. N2LoS introduces several key innovations. First, we design HFD (Hybrid Frequency-Hopping and Direct Sequence Spread Spectrum) to detect and differentiate reflectors from the target. Second, we enhance signal-to-noise ratio (SNR) by exploiting the correlation properties of the designed signals, improving detection robustness in complex environments. Third, we propose FS-MUSIC (Frequency-Spatial Multiple Signal Classification), a super resolution algorithm that extends the traditional MUSIC method by constructing a higher-rank signal matrix, enabling the resolution of additional multipath components. We evaluate N2LoS using a 24 GHz mmWave radar with 250 MHz bandwidth in three diverse environments: a laboratory, an office, and an around-the-corner corridor. Experimental results demonstrate that N2LoS achieves median localization errors of 10.69 cm (X) and 11.98 cm (Y) at a 5 m range in the laboratory setting, showcasing its effectiveness for real-world NLoS localization.

eess.SP↗

arXiv2024

Towards High-Speed Passive Visible Light Communication with Event Cameras and Digital Micro-Mirrors

Passive visible light communication (VLC) modulates light propagation or reflection to transmit data without directly modulating the light source. Thus, passive VLC provides an alternative to conventional VLC, enabling communication where the light source cannot be directly controlled. There have been ongoing efforts to explore new methods and devices for modulating light propagation or reflection. The state-of-the-art has broken the 100 kbps data rate barrier for passive VLC by using a digital micro-mirror device (DMD) as the light modulating platform, or transmitter, and a photo-diode as the receiver. We significantly extend this work by proposing a massive spatial data channel framework for DMDs, where individual channels can be decoded in parallel using an event camera at the receiver. For the event camera, we introduce event processing algorithms to detect numerous channels and decode bits from individual channels with high reliability. Our prototype, built with off-the-shelf event cameras and DMDs, can decode up to $\sim$2,000 parallel channels, achieving a data transmission rate of 1.6 Mbps, markedly surpassing current benchmarks by 16x.

cs.NI↗

arXiv2024

Dynamic phases induced by two-level system defects on driven qubits

Recent experimental evidences point to two-level defects, located in the oxides and on the interfaces of the Josephson junctions, as the major constituents of decoherence in superconducting qubits. How these defects affect the qubit evolution with the presence of external driving is less well understood since the semiclassical qubit-field coupling renders the Jaynes-Cummings model for qubit-defect coupling undiagonalizable. We analyze the decoherence dynamics in the continuous coherent state space induced by the driving and solve the master equation endowed with an extra decay-cladded driving term via a Fokker-Planck equation. The solutions for diffusion propagators as Gaussian distributions show four distinct dynamic phases: four types of convergence paths to limit cycles of varying radius by the distribution mean, which are determined by the competing external driving and the defect decays. The qubit trajectory resulted from these solutions is a super-Poissonian over displac ed Fock states, which reduces to a Gibbs state of effective temperature decided by the defect at zero driving limit. Further, the Poincare map shows the dependence of the rate of convergence on the initial state. In other words, the qubit evolution can serve as an indicator of the defect coupling strength through the variation of the driving strength as a parameter.

quant-ph↗

arXiv2024

Multiple Contexts and Frequencies Aggregation Network forDeepfake Detection

Deepfake detection faces increasing challenges since the fast growth of generative models in developing massive and diverse Deepfake technologies. Recent advances rely on introducing heuristic features from spatial or frequency domains rather than modeling general forgery features within backbones. To address this issue, we turn to the backbone design with two intuitive priors from spatial and frequency detectors, \textit{i.e.,} learning robust spatial attributes and frequency distributions that are discriminative for real and fake samples. To this end, we propose an efficient network for face forgery detection named MkfaNet, which consists of two core modules. For spatial contexts, we design a Multi-Kernel Aggregator that adaptively selects organ features extracted by multiple convolutions for modeling subtle facial differences between real and fake faces. For the frequency components, we propose a Multi-Frequency Aggregator to process different bands of frequency components by adaptively reweighing high-frequency and low-frequency features. Comprehensive experiments on seven popular deepfake detection benchmarks demonstrate that our proposed MkfaNet variants achieve superior performances in both within-domain and across-domain evaluations with impressive efficiency of parameter usage.

cs.CV↗

arXiv2023

Observation of Multiple Topological Corner States in Thermal Diffusion

Higher-dimensional topological meta-materials have more flexible than one-dimensional topological materials, which are more convenient to apply and solve practical problems. However, in diffusion systems, higher-dimensional topological states have not been well studied. In this work, we experimentally realized the 2D topological structure based on a kagome lattice of thermal metamaterial. Due to the anti-Hermitian properties of the diffusion Hamiltonian, it has purely imaginary eigenvalues corresponding to the decay rate. By theoretical analysis and directly observing the decay rate of temperature through experiments, we present the various corner states in 2D topological diffusive system. Our work constitutes the first realization of multiple corner states with high decay rates in a pure diffusion system, which provides a new idea for the design of topological protected thermal metamaterial in the future.

cond-mat.mes-hall↗

arXiv2023

Scattering symmetry of diffusive systems

Significant progress in manipulating heat diffusion has been achieved with the advent of non-Hermitian physics and topology. However, previous studies on diffusive systems have primarily concentrated on isolated cases, where fields decay exponentially over time. In practical scenarios, systems inevitably interact with external environments, making it essential to study their responses to external heat signals. This, in turn, relies on analyzing the scattering behavior of these signals. In our work, we experimentally realize thermal scattering in a diffusive anti-parity-time (APT) system. We define key parameters of the temperature field-amplitude, phase, and chirality-and reveal that the scattering symmetry of the APT diffusive system only arises when temperature signals with different chiralities interact. Such mechanism is induced by the unique dispersion properties in diffusive systems, where positive and negative frequencies are inequivalent, corresponding to different chiralities. This also explains the difficulty of observing APT scattering symmetry in wave systems. Our findings highlight the pivotal role of scattering channels in the symmetry and phase transitions of non-Hermitian systems and propose novel approaches for analyzing and controlling strongly dissipative phenomena.

physics.app-ph↗

arXiv2022

Spectral-Loc: Indoor Localization using Light Spectral Information

For indoor settings, we investigate the impact of location on the spectral distribution of the received light, i.e., the intensity of light for different wavelengths. Our investigations confirm that even under the same light source, different locations exhibit slightly different spectral distribution due to reflections from their localised environment containing different materials or colours. By exploiting this observation, we propose Spectral-Loc, a novel indoor localization system that uses light spectral information to identify the location of the device. With spectral sensors finding their way in latest products and applications, such as white balancing in smartphone photography, Spectral-Loc can be readily deployed without requiring any additional hardware or infrastructure. We prototype Spectral-Loc using a commercial-off-the-shelf light spectral sensor, AS7265x, which can measure light intensity over 18 different wavelength sub-bands. We benchmark the localisation accuracy of Spectral-Loc against the conventional light intensity sensors that provide only a single intensity value. Our evaluations over two different indoor spaces, a meeting room and a large office space, demonstrate that use of light spectral information significantly reduces the localization error for the different percentiles.

cs.HC↗

arXiv2021

Secure Reversible Data Hiding in Encrypted Images Using Cipher-Feedback Secret Sharing

Reversible data hiding in encrypted images (RDH-EI) has attracted increasing attention, since it can protect the privacy of original images while the embedded data can be exactly extracted. Recently, some RDH-EI schemes with multiple data hiders have been proposed using secret sharing technique. However, these schemes protect the contents of the original images with lightweight security level. In this paper, we propose a high-security RDH-EI scheme with multiple data hiders. First, we introduce a cipher-feedback secret sharing (CFSS) technique. It follows the cryptography standards by introducing the cipher-feedback strategy of AES. Then, using the CFSS technique, we devise a new (r,n)-threshold (r<=n) RDH-EI scheme with multiple data hiders called CFSS-RDHEI. It can encrypt an original image into n encrypted images with reduced size using an encryption key and sends each encrypted image to one data hider. Each data hider can independently embed secret data into the encrypted image to obtain the corresponding marked encrypted image. The original image can be completely recovered from r marked encrypted images and the encryption key. Performance evaluations show that our CFSS-RDHEI scheme has high embedding rate and its generated encrypted images are much smaller, compared to existing secret sharing-based RDH-EI schemes. Security analysis demonstrates that it can achieve high security to defense some commonly used security attacks.

cs.CR↗

arXiv2012

Social Event Detection with Interaction Graph Modeling

This paper focuses on detecting social, physical-world events from photos posted on social media sites. The problem is important: cheap media capture devices have significantly increased the number of photos shared on these sites. The main contribution of this paper is to incorporate online social interaction features in the detection of physical events. We believe that online social interaction reflect important signals among the participants on the "social affinity" of two photos, thereby helping event detection. We compute social affinity via a random-walk on a social interaction graph to determine similarity between two photos on the graph. We train a support vector machine classifier to combine the social affinity between photos and photo-centric metadata including time, location, tags and description. Incremental clustering is then used to group photos to event clusters. We have very good results on two large scale real-world datasets: Upcoming and MediaEval. We show an improvement between 0.06-0.10 in F1 on these datasets.

cs.SI↗