Searcharxiv⌕ Search

arXiv subjects

Ye Li

Publications and source records attributed to Ye Li.

At least 73 records · Page 4Linked to original sources

TS-DP: Reinforcement Speculative Decoding For Temporal Adaptive Diffusion Policy Acceleration

Diffusion Policy (DP) excels in embodied control but suffers from high inference latency and computational cost due to multiple iterative denoising steps. The temporal complexity of embodied tasks demands a dynamic and adaptable computation mode. Static and lossy acceleration methods, such as quantization, fail to handle such dynamic embodied tasks, while speculative decoding offers a lossless and adaptive yet underexplored alternative for DP. However, it is non-trivial to address the following challenges: how to match the base model's denoising quality at lower cost under time-varying task difficulty in embodied settings, and how to dynamically and interactively adjust computation based on task difficulty in such environments. In this paper, we propose Temporal-aware Reinforcement-based Speculative Diffusion Policy (TS-DP), the first framework that enables speculative decoding for DP with temporal adaptivity. First, to handle dynamic environments where task difficulty varies over time, we distill a Transformer-based drafter to imitate the base model and replace its costly denoising calls. Second, an RL-based scheduler further adapts to time-varying task difficulty by adjusting speculative parameters to maintain accuracy while improving efficiency. Extensive experiments across diverse embodied environments demonstrate that TS-DP achieves up to 4.17 times faster inference with over 94% accepted drafts, reaching an inference frequency of 25 Hz and enabling real-time diffusion-based control without performance degradation.

cs.LG↗

FREE: Uncertainty-Aware Autoregression for Parallel Diffusion Transformers

Diffusion Transformers (DiTs) achieve state-of-the-art generation quality but require long sequential denoising trajectories, leading to high inference latency. Recent speculative inference methods enable lossless parallel sampling in U-Net-based diffusion models via a drafter-verifier scheme, but their acceleration is limited on DiTs due to insufficient draft accuracy during verification. To address this limitation, we analyze the DiTs' feature dynamics and find the features of the final transformer layer (top-block) exhibit strong temporal consistency and rich semantic abstraction. Based on this insight, we propose FREE, a novel framework that employs a lightweight drafter to perform feature-level autoregression with parallel verification, guaranteeing lossless acceleration with theoretical and empirical support. Meanwhile, prediction variance (uncertainty) of DiTs naturally increases in later denoising steps, reducing acceptance rates under speculative sampling. To mitigate this effect, we further introduce an uncertainty-guided relaxation strategy, forming FREE (relax), which dynamically adjusts the acceptance probability in response to uncertainty levels. Experiments on ImageNet-$512^2$ show that FREE achieves up to $1.86 \times$ acceleration, and FREE (relax) further reaches $2.25 \times$ speedup while maintaining high perceptual and quantitative fidelity in generation quality.

cs.CV↗

RGBSQGrasp: Inferring Local Superquadric Primitives from Single RGB Image for Graspability-Aware Bin Picking

Bin picking is a challenging robotic task due to occlusions and physical constraints that limit visual information for object recognition and grasping. Existing approaches often rely on known CAD models or prior object geometries, restricting generalization to novel or unknown objects. Other methods directly regress grasp poses from RGB-D data without object priors, but the inherent noise in depth sensing and the lack of object understanding make grasp synthesis and evaluation more difficult. Superquadrics (SQ) offer a compact, interpretable shape representation that captures the physical and graspability understanding of objects. However, recovering them from limited viewpoints is challenging, as existing methods rely on multiple perspectives for near-complete point cloud reconstruction, limiting their effectiveness in bin-picking. To address these challenges, we propose \textbf{RGBSQGrasp}, a grasping framework that leverages superquadric shape primitives and foundation metric depth estimation models to infer grasp poses from a monocular RGB camera -- eliminating the need for depth sensors. Our framework integrates a universal, cross-platform dataset generation pipeline, a foundation model-based object point cloud estimation module, a global-local superquadric fitting network, and an SQ-guided grasp pose sampling module. By integrating these components, RGBSQGrasp reliably infers grasp poses through geometric reasoning, enhancing grasp stability and adaptability to unseen objects. Real-world robotic experiments demonstrate a 92% grasp success rate, highlighting the effectiveness of RGBSQGrasp in packed bin-picking environments.

cs.RO↗

A possible periodic RM evolution in the repeating FRB 20220529

Fast radio bursts (FRBs) are mysterious millisecond-duration radio transients of extragalactic origin. Some of them repeat, while others apparently do not. Investigations of periodic activity in repeating FRB have been conducted to probe their origins. While periodicity in the burst rate has been reported, studies of periodicities in other properties, such as dispersion measure (DM) and rotation measure (RM), are sparse. FRB~20220529 was monitored by the Five-hundred-meter Aperture Spherical radio Telescope (FAST) for nearly three years, providing an opportunity to investigate periodicity in its observed properties. Here we report a possible period of $\sim 200$ days in the RM evolution, with a significance of {4.1 $σ$} estimated via the Lomb-Scargle algorithm and {3.1 $σ$} with the phase-folding method. Periodicity in the burst rate was also investigated. It may indicate that the FRB progenitor is in a binary system, which is consistent with the significant RM increase and prompt recovery of this FRB on a week-timescale. Other scenarios, such as a system with an intermediate-mass black hole, are also explored.

astro-ph.HE↗

Multiwavelength Observations of the Apparently Non-repeating FRB 20250316A

The physical origin of fast radio bursts (FRBs) remains uncertain. Although multiwavelength observations have been widely conducted, only Galactic FRB~20200428D is associated with an X-ray burst from the magnetar SGR J1935+2154. Here, we present multiwavelength follow-up observations of the nearby bright FRB~20250316A, including the Five-hundred-meter Aperture Spherical radio Telescope (FAST), Einstein Probe (EP) X-ray mission, Chandra X-ray Observatory, Wide Field Survey Telescope (WFST) and Space Variable Object Monitor/Visible Telescope (SVOM/VT). The 13.08-hour FAST follow-up campaign without pulse detection requires an energy distribution flatter than those of well-known repeating FRBs, suggesting that this burst is likely a one-off event. A prompt EP follow-up and multi-epoch observational campaign totaling $>$ 100 ks led to the detection of an X-ray source within the angular resolution of its Follow-up X-ray Telescope (FXT, $10^{\prime\prime}$). A subsequent Chandra observation revealed this source to be offset by $7^{\prime\prime}$ from the FRB position, and established a 0.5-10 keV flux upper limit of $7.6\times 10^{-15}$ $\rm erg\,cm^{-2}\,s^{-1}$ at the FRB position, corresponding to $\sim 10^{39}$ $\rm erg\,s^{-1}$ at the 40 Mpc distance of the host galaxy NGC~4141. These results set one of the most stringent limits on X-ray emission from a non-repeating FRB, disfavoring ultra-luminous X-ray sources (ULXs) as counterparts of apparently one-off FRBs and offering critical insights into afterglow models. Our study suggests that an arcsecond localization of both the FRB and its potential X-ray counterpart is essential for exploring the X-ray counterpart of an FRB.

astro-ph.HE↗

Spatial Policy: Guiding Visuomotor Robotic Manipulation with Spatial-Aware Modeling and Reasoning

Vision-centric hierarchical embodied models have demonstrated strong potential. However, existing methods lack spatial awareness capabilities, limiting their effectiveness in bridging visual plans to actionable control in complex environments. To address this problem, we propose Spatial Policy (SP), a unified spatial-aware visuomotor robotic manipulation framework via explicit spatial modeling and reasoning. Specifically, we first design a spatial-conditioned embodied video generation module to model spatially guided predictions through the spatial plan table. Then, we propose a flow-based action prediction module to infer executable actions with coordination. Finally, we propose a spatial reasoning feedback policy to refine the spatial plan table via dual-stage replanning. Extensive experiments show that SP substantially outperforms state-of-the-art baselines, achieving over 33% improvement on Meta-World and over 25% improvement on iTHOR, demonstrating strong effectiveness across 23 embodied control tasks. We additionally evaluate SP in real-world robotic experiments to verify its practical viability. SP enhances the practicality of embodied models for robotic control applications. Code and checkpoints are maintained at https://plantpotatoonmoon.github.io/SpatialPolicy/.

cs.RO↗

Connectivity-Guided Sparsification of 2-FWL GNNs: Preserving Full Expressivity with Improved Efficiency

Higher-order Graph Neural Networks (HOGNNs) based on the 2-FWL test achieve superior expressivity by modeling 2- and 3-node interactions, but at $\mathcal{O}(n^3)$ computational cost. However, this computational burden is typically mitigated by existing efficiency methods at the cost of reduced expressivity. We propose \textbf{Co-Sparsify}, a connectivity-aware sparsification framework that eliminates \emph{provably redundant} computations while preserving full 2-FWL expressive power. Our key insight is that 3-node interactions are expressively necessary only within \emph{biconnected components} -- maximal subgraphs where every pair of nodes lies on a cycle. Outside these components, structural relationships can be fully captured via 2-node message passing or global readout, rendering higher-order modeling unnecessary. Co-Sparsify restricts 2-node message passing to connected components and 3-node interactions to biconnected ones, removing computation without approximation or sampling. We prove that Co-Sparsified GNNs are as expressive as the 2-FWL test. Empirically, on PPGN, Co-Sparsify matches or exceeds accuracy on synthetic substructure counting tasks and achieves state-of-the-art performance on real-world benchmarks (ZINC, QM9). This study demonstrates that high expressivity and scalability are not mutually exclusive: principled, topology-guided sparsification enables powerful, efficient GNNs with theoretical guarantees.

cs.LG↗

Unified Humanoid Fall-Safety Policy from a Few Demonstrations

Falling is an inherent risk of humanoid mobility. Maintaining stability is thus a primary safety focus in robot control and learning, yet no existing approach fully averts loss of balance. When instability does occur, prior work addresses only isolated aspects of falling: avoiding falls, choreographing a controlled descent, or standing up afterward. Consequently, humanoid robots lack integrated strategies for impact mitigation and prompt recovery when real falls defy these scripts. We aim to go beyond keeping balance to make the entire fall-and-recovery process safe and autonomous: prevent falls when possible, reduce impact when unavoidable, and stand up when fallen. By fusing sparse human demonstrations with reinforcement learning and an adaptive diffusion-based memory of safe reactions, we learn adaptive whole-body behaviors that unify fall prevention, impact mitigation, and rapid recovery in one policy. Experiments in simulation and on a Unitree G1 demonstrate robust sim-to-real transfer, lower impact forces, and consistently fast recovery across diverse disturbances, pointing towards safer, more resilient humanoids in real environments. Videos are available at https://firm2025.github.io/.

cs.RO↗

A comprehensive search for Long and Short Periodic Features from an Extremely Active Cycle of FRB 20240114A

Possible periodic features in fast radio bursts (FRBs) may provide insights into their astrophysical origins. Using extensive observations from the Five-hundred-meter Aperture Spherical radio Telescope (FAST), we conduct a multi-timescale periodicity search for the exceptionally active repeater FRB~20240114A. Our analysis is based on different datasets for different timescales: for short-timescale periodicity in Time of Arrivals (TOAs), we use 57 observations from January to August 2024; for long-timescale periodicity, we employ an extended TOA dataset comprising 111 observations spanning from January 2024 to October 2025; and for burst time series analysis, we utilize individual burst data from the 57 FAST observations. We identify three candidate short-timescale periodic signals (0.673~s, 0.635~s, and 0.536~s) with significances of $3.2σ$--$6σ$, each detected in two independent observations. On longer timescales, we detect a significant $143.40\pm7.19$-day periodicity with $5.2σ$ significance, establishing FRB~20240114A as a periodic repeater. In burst time series, we find quasi-periodic oscillations in the few hundred Hz range ($3.4σ$ and $3.7σ$) and periodic burst trains with periods of several to tens of milliseconds ($3σ$--$3.9σ$), though these periodic features appear transient and short-lived. The detection of periodic signals at these different time scales indicates that FRB 20240114A exhibits intriguing periodic self-similar characteristics. Despite the comprehensive dataset, no definitive periodicity linked to the source's rotation is confirmed, placing stringent constraints on the intrinsic source properties and the modulation mechanisms. All data are available via the Science Data Bank.

astro-ph.HE↗

U-DECN: End-to-End Underwater Object Detection ConvNet with Improved DeNoising Training

Underwater object detection has higher requirements of running speed and deployment efficiency for the detector due to its specific environmental challenges. NMS of two- or one-stage object detectors and transformer architecture of query-based end-to-end object detectors are not conducive to deployment on underwater embedded devices with limited processing power. As for the detrimental effect of underwater color cast noise, recent underwater object detectors make network architecture or training complex, which also hinders their application and deployment on unmanned underwater vehicles. In this paper, we propose the Underwater DECO with improved deNoising training (U-DECN), the query-based end-to-end object detector (with ConvNet encoder-decoder architecture) for underwater color cast noise that addresses the above problems. We integrate advanced technologies from DETR variants into DECO and design optimization methods specifically for the ConvNet architecture, including Deformable Convolution in SIM and Separate Contrastive DeNoising Forward methods. To address the underwater color cast noise issue, we propose an Underwater Color DeNoising Query method to improve the generalization of the model for the biased object feature information by different color cast noise. Our U-DECN, with ResNet-50 backbone, achieves the best 64.0 AP on DUO and the best 58.1 AP on RUOD, and 21 FPS (5 times faster than Deformable DETR and DINO 4 FPS) on NVIDIA AGX Orin by TensorRT FP16, outperforming the other state-of-the-art query-based end-to-end object detectors. The code is available at https://github.com/LEFTeyex/U-DECN.

cs.CV↗

Maritime Communication in Evaporation Duct Environment with Ship Trajectory Optimization

In maritime wireless networks, the evaporation duct effect has been known as a preferable condition for long-range transmissions. However, how to effectively utilize the duct effect for efficient communication design is still open for investigation. In this paper, we consider a typical scenario of ship-to-shore data transmission, where a ship collects data from multiple oceanographic buoys, sails from one to another, and transmits the collected data back to a terrestrial base station during its voyage. A novel framework, which exploits priori information of the channel gain map in the presence of evaporation duct, is proposed to minimize the data transmission time and the sailing time by optimizing the ship's trajectory. To this end, a multi-objective optimization problem is formulated and is further solved by a dynamic population PSO-integrated NSGA-II algorithm. Through simulations, it is demonstrated that, compared to the benchmark scheme which ignores useful information of the evaporation duct, the proposed scheme can effectively reduce both the data transmission time and the sailing time.

eess.SP↗

SP-VLA: A Joint Model Scheduling and Token Pruning Approach for VLA Model Acceleration

Vision-Language-Action (VLA) models have attracted increasing attention for their strong control capabilities. However, their high computational cost and low execution frequency hinder their suitability for real-time tasks such as robotic manipulation and autonomous navigation. Existing VLA acceleration methods primarily focus on structural optimization, overlooking the fact that these models operate in sequential decision-making environments. As a result, temporal redundancy in sequential action generation and spatial redundancy in visual input remain unaddressed. To this end, we propose SP-VLA, a unified framework that accelerates VLA models by jointly scheduling models and pruning tokens. Specifically, we design an action-aware model scheduling mechanism that reduces temporal redundancy by dynamically switching between VLA model and a lightweight generator. Inspired by the human motion pattern of focusing on key decision points while relying on intuition for other actions, we categorize VLA actions into deliberative and intuitive, assigning the former to the VLA model and the latter to the lightweight generator, enabling frequency-adaptive execution through collaborative model scheduling. To address spatial redundancy, we further develop a spatio-semantic dual-aware token pruning method. Tokens are classified into spatial and semantic types and pruned based on their dual-aware importance to accelerate VLA inference. These two mechanisms work jointly to guide the VLA in focusing on critical actions and salient visual information, achieving effective acceleration while maintaining high accuracy. Extensive experiments show that our method achieves 1.5$\times$ lossless acceleration in LIBERO and 2.4$\times$ in SimplerEnv, with up to 6% average performance gain. Inference frequency and latency improve by 2.2$\times$ in SimplerEnv and 1.4$\times$ in LIBERO.

cs.CV↗

Enhanced Quality Aware-Scalable Underwater Image Compression

Underwater imaging plays a pivotal role in marine exploration and ecological monitoring. However, it faces significant challenges of limited transmission bandwidth and severe distortion in the aquatic environment. In this work, to achieve the target of both underwater image compression and enhancement simultaneously, an enhanced quality-aware scalable underwater image compression framework is presented, which comprises a Base Layer (BL) and an Enhancement Layer (EL). In the BL, the underwater image is represented by controllable number of non-zero sparse coefficients for coding bits saving. Furthermore, the underwater image enhancement dictionary is derived with shared sparse coefficients to make reconstruction close to the enhanced version. In the EL, a dual-branch filter comprising rough filtering and detail refinement branches is designed to produce a pseudo-enhanced version for residual redundancy removal and to improve the quality of final reconstruction. Extensive experimental results demonstrate that the proposed scheme outperforms the state-of-the-art works under five large-scale underwater image datasets in terms of Underwater Image Quality Measure (UIQM).

eess.IV↗

Hysteresis Measurements as a Diagnostic Tool: A Systematic Approach for Stability Benchmarking and Performance Projection of 2D-Materials-Based MOSFETs

Judging by its omnipresence in the literature, the hysteresis observed in the transfer characteristics of emerging transistors based on 2D-materials is widely accepted as an important metric related to the device quality. The hysteresis is often reported with attributes like "negligible" or "small" without giving any specifics as to how this was determined and against what reference the measured values were compared to. Quite surprisingly, there appears to be only a fragmentary understanding of the mechanisms actually contributing to hysteresis and the sensitivity of the actual measurement on various experimental parameters. We attempt to close this gap by first providing a comprehensive theoretical analysis of the dominant mechanisms contributing to hysteresis: charge trapping by defects from the channel or the gate, the drift of mobile charges, and eventually ferroelectricity. We continue by suggesting methods to experimentally distinguishing between these phenomena. Based on these discussions it becomes clear that previously reported hysteresis values have little meaning as they have been non-systematically recorded under arbitrary conditions. In order to resolve this predicament, we propose a standardized hysteresis measurement scheme to establish the hysteresis as a comparable metric for the assessment of device stability. Our standardized scheme ensures that hysteresis data can be effectively compared across different technologies and, most importantly, provide a means to extrapolate data obtained on thicker prototypes to subnanometer equivalent oxide thicknesses. This facilitates the systematic benchmarking of insulator/channel combinations in terms of stability, which thereby enables the screening of material systems for more stable and reliable 2D-material-based MOSFETs.

physics.app-ph↗

A Fast Initialization Method for Neural Network Controllers: A Case Study of Image-based Visual Servoing Control for the multicopter Interception

Reinforcement learning-based controller design methods often require substantial data in the initial training phase. Moreover, the training process tends to exhibit strong randomness and slow convergence. It often requires considerable time or high computational resources. Another class of learning-based method incorporates Lyapunov stability theory to obtain a control policy with stability guarantees. However, these methods generally require an initially stable neural network control policy at the beginning of training. Evidently, a stable neural network controller can not only serve as an initial policy for reinforcement learning, allowing the training to focus on improving controller performance, but also act as an initial state for learning-based Lyapunov control methods. Although stable controllers can be designed using traditional control theory, designers still need to have a great deal of control design knowledge to address increasingly complicated control problems. The proposed neural network rapid initialization method in this paper achieves the initial training of the neural network control policy by constructing datasets that conform to the stability conditions based on the system model. Furthermore, using the image-based visual servoing control for multicopter interception as a case study, simulations and experiments were conducted to validate the effectiveness and practical performance of the proposed method. In the experiment, the trained control policy attains a final interception velocity of 15 m/s.

eess.SY↗

Design and Control of a Perching Drone Inspired by the Prey-Capturing Mechanism of Venus Flytrap

The endurance and energy efficiency of drones remain critical challenges in their design and operation. To extend mission duration, numerous studies explored perching mechanisms that enable drones to conserve energy by temporarily suspending flight. This paper presents a new perching drone that utilizes an active flexible perching mechanism inspired by the rapid predation mechanism of the Venus flytrap, achieving perching in less than 100 ms. The proposed system is designed for high-speed adaptability to the perching targets. The overall drone design is outlined, followed by the development and validation of the biomimetic perching structure. To enhance the system stability, a cascade extended high-gain observer (EHGO) based control method is developed, which can estimate and compensate for the external disturbance in real time. The experimental results demonstrate the adaptability of the perching structure and the superiority of the cascaded EHGO in resisting wind and perching disturbances.

cs.RO↗

Prospects for Time-Domain and Multi-Messenger Science with eXTP

In this new era of time-domain and multi-messenger astronomy, various new transients and new phenomena are constantly being discovered thanks to the rapid advances in observations, which provide the excellent opportunity to study the physics in the extreme environments. The enhanced X-ray Timing and Polarimetry mission (eXTP), planned to be launched in 2030, has several key advantages, including advanced polarimetry, high sensitivity & large effective area, and wide energy range coverage, which make it a groundbreaking project in high-energy astrophysics. In this article, we briefly introduce the potential time-domain and multi-messenger targets for eXTP, including gravitational-wave (GW) counterparts, gamma-ray bursts (GRBs), magnetars and fast radio bursts (FRBs), tidal disruption events (TDEs), supernovae, high energy neutrinos and TeV active galactic nucleus (AGNs), and so on. We discuss the advantages of future eXTP observations for detecting these sources, their detection capabilities, the abilities to distinguish theoretical models, and their applications in gravity and cosmology.

astro-ph.HE↗

Physics-Guided Diffusion Transformer with Spherical Harmonic Posterior Sampling for High-Fidelity Angular Super-Resolution in Diffusion MRI

Diffusion MRI (dMRI) angular super-resolution (ASR) aims to reconstruct high-angular-resolution (HAR) signals from limited low-angular-resolution (LAR) data without prolonging scan time. However, existing methods are limited in recovering fine-grained angular details or preserving high fidelity due to inadequate modeling of q-space geometry and insufficient incorporation of physical constraints. In this paper, we introduce a Physics-Guided Diffusion Transformer (PGDiT) designed to explore physical priors throughout both training and inference stages. During training, a Q-space Geometry-Aware Module (QGAM) with b-vector modulation and random angular masking facilitates direction-aware representation learning, enabling the network to generate directionally consistent reconstructions with fine angular details from sparse and noisy data. In inference, a two-stage Spherical Harmonics-Guided Posterior Sampling (SHPS) enforces alignment with the acquired data, followed by heat-diffusion-based SH regularization to ensure physically plausible reconstructions. This coarse-to-fine refinement strategy mitigates oversmoothing and artifacts commonly observed in purely data-driven or generative models. Extensive experiments on general ASR tasks and two downstream applications, Diffusion Tensor Imaging (DTI) and Neurite Orientation Dispersion and Density Imaging (NODDI), demonstrate that PGDiT outperforms existing deep learning models in detail recovery and data fidelity. Our approach presents a novel generative ASR framework that offers high-fidelity HAR dMRI reconstructions, with potential applications in neuroscience and clinical research.

eess.IV↗