arXiv subjects

YeongHyeon Park

Publications and source records attributed to YeongHyeon Park.

At least 19 recordsLinked to original sources

arXiv2026

Dosimetric Impact of Hidden Input Parameters in Inverse Optimization Algorithms for GYN HDR Brachytherapy

Inverse optimization (IO) algorithms are used in GYN HDR brachytherapy planning, with user parameter settings embedded in commercial TPS. To examine the dosimetric influence of hidden input parameters in three IO algorithms-IPSA, HIPO, and MCO-for GYN HDR brachytherapy across two applicator types. In-house implementations of IPSA, HIPO, and MCO were implemented and evaluated against retrospectively generated commercial TPS plans (Oncentra Brachy) using identical clinical input parameters across 24 cervical cancer cases (18 T&O; 6 T&O+Needles (T&O+N)). Each IO algorithm was assessed using 1k combinations of hidden parameters (e.g., dwell-time modulation constraints, convergence thresholds). Cumulative DVH curves and dosimetric indices (HR-CTV D98/D90, OAR D2cc) were compared with commercial plans. Standard deviations (SD) of DVH differences were used to characterize sensitivity to hidden parameters. For HR-CTV, SD values in T&O+N cases reached 23.0 Gy and 7.1 Gy for MCO and HIPO, respectively, with corresponding average values of 55.8 Gy and 19.7 Gy. In T&O cases, HR-CTV SD values reached 4.9 Gy and 3.3 Gy for HIPO and IPSA, respectively, with average values of 20.1 Gy and 8.6 Gy. MCO exhibited the highest sensitivity, followed by HIPO and IPSA. T&O+N cases showed greater sensitivity than T&O cases. Absolute differences in HR-CTV D90 (D98) relative to commercial algorithms reached up to 33.3 Gy (28.4) for T&O+N cases and 10.8 Gy (8.5) for T&O cases. For OARs, absolute D2cc differences in T&O+N (T&O) cases reached up to 8.6 Gy (2.3) for rectum, 17 Gy (10.2) for bladder, 14.8 Gy (3.9) for sigmoid, and 7.0 Gy (8.1) for bowel. Hidden input parameter settings significantly impact on GYN HDR plans, with target coverage up to 28.4 Gy across IO algorithms for both T&O and T&O+N cases. The findings in this study shown the potential to improve plans through hidden input parameter optimization.

physics.med-ph↗

arXiv2025

Anomaly Detection by Effectively Leveraging Synthetic Images

Anomaly detection plays a vital role in industrial manufacturing. Due to the scarcity of real defect images, unsupervised approaches that rely solely on normal images have been extensively studied. Recently, diffusion-based generative models brought attention to training data synthesis as an alternative solution. In this work, we focus on a strategy to effectively leverage synthetic images to maximize the anomaly detection performance. Previous synthesis strategies are broadly categorized into two groups, presenting a clear trade-off. Rule-based synthesis, such as injecting noise or pasting patches, is cost-effective but often fails to produce realistic defect images. On the other hand, generative model-based synthesis can create high-quality defect images but requires substantial cost. To address this problem, we propose a novel framework that leverages a pre-trained text-guided image-to-image translation model and image retrieval model to efficiently generate synthetic defect images. Specifically, the image retrieval model assesses the similarity of the generated images to real normal images and filters out irrelevant outputs, thereby enhancing the quality and relevance of the generated defect images. To effectively leverage synthetic images, we also introduce a two stage training strategy. In this strategy, the model is first pre-trained on a large volume of images from rule-based synthesis and then fine-tuned on a smaller set of high-quality images. This method significantly reduces the cost for data collection while improving the anomaly detection performance. Experiments on the MVTec AD dataset demonstrate the effectiveness of our approach.

cs.CV↗

arXiv2025

ARMA Block: A CNN-Based Autoregressive and Moving Average Module for Long-Term Time Series Forecasting

This paper proposes a simple yet effective convolutional module for long-term time series forecasting. The proposed block, inspired by the Auto-Regressive Integrated Moving Average (ARIMA) model, consists of two convolutional components: one for capturing the trend (autoregression) and the other for refining local variations (moving average). Unlike conventional ARIMA, which requires iterative multi-step forecasting, the block directly performs multi-step forecasting, making it easily extendable to multivariate settings. Experiments on nine widely used benchmark datasets demonstrate that our method ARMA achieves competitive accuracy, particularly on datasets exhibiting strong trend variations, while maintaining architectural simplicity. Furthermore, analysis shows that the block inherently encodes absolute positional information, suggesting its potential as a lightweight replacement for positional embeddings in sequential models.

cs.LG↗

arXiv2025

Contrastive Language Prompting to Ease False Positives in Medical Anomaly Detection

A pre-trained visual-language model, contrastive language-image pre-training (CLIP), successfully accomplishes various downstream tasks with text prompts, such as finding images or localizing regions within the image. Despite CLIP's strong multi-modal data capabilities, it remains limited in specialized environments, such as medical applications. For this purpose, many CLIP variants-i.e., BioMedCLIP, and MedCLIP-SAMv2-have emerged, but false positives related to normal regions persist. Thus, we aim to present a simple yet important goal of reducing false positives in medical anomaly detection. We introduce a Contrastive LAnguage Prompting (CLAP) method that leverages both positive and negative text prompts. This straightforward approach identifies potential lesion regions by visual attention to the positive prompts in the given image. To reduce false positives, we attenuate attention on normal regions using negative prompts. Extensive experiments with the BMAD dataset, including six biomedical benchmarks, demonstrate that CLAP method enhances anomaly detection performance. Our future plans include developing an automated fine prompting method for more practical usage.

cs.CV↗

arXiv2024

Feature Attenuation of Defective Representation Can Resolve Incomplete Masking on Anomaly Detection

In unsupervised anomaly detection (UAD) research, while state-of-the-art models have reached a saturation point with extensive studies on public benchmark datasets, they adopt large-scale tailor-made neural networks (NN) for detection performance or pursued unified models for various tasks. Towards edge computing, it is necessary to develop a computationally efficient and scalable solution that avoids large-scale complex NNs. Motivated by this, we aim to optimize the UAD performance with minimal changes to NN settings. Thus, we revisit the reconstruction-by-inpainting approach and rethink to improve it by analyzing strengths and weaknesses. The strength of the SOTA methods is a single deterministic masking approach that addresses the challenges of random multiple masking that is inference latency and output inconsistency. Nevertheless, the issue of failure to provide a mask to completely cover anomalous regions is a remaining weakness. To mitigate this issue, we propose Feature Attenuation of Defective Representation (FADeR) that only employs two MLP layers which attenuates feature information of anomaly reconstruction during decoding. By leveraging FADeR, features of unseen anomaly patterns are reconstructed into seen normal patterns, reducing false alarms. Experimental results demonstrate that FADeR achieves enhanced performance compared to similar-scale NNs. Furthermore, our approach exhibits scalability in performance enhancement when integrated with other single deterministic masking methods in a plug-and-play manner.

cs.CV↗

arXiv2024

Scene Depth Estimation from Traditional Oriental Landscape Paintings

Scene depth estimation from paintings can streamline the process of 3D sculpture creation so that visually impaired people appreciate the paintings with tactile sense. However, measuring depth of oriental landscape painting images is extremely challenging due to its unique method of depicting depth and poor preservation. To address the problem of scene depth estimation from oriental landscape painting images, we propose a novel framework that consists of two-step Image-to-Image translation method with CLIP-based image matching at the front end to predict the real scene image that best matches with the given oriental landscape painting image. Then, we employ a pre-trained SOTA depth estimation model for the generated real scene image. In the first step, CycleGAN converts an oriental landscape painting image into a pseudo-real scene image. We utilize CLIP to semantically match landscape photo images with an oriental landscape painting image for training CycleGAN in an unsupervised manner. Then, the pseudo-real scene image and oriental landscape painting image are fed into DiffuseIT to predict a final real scene image in the second step. Finally, we measure depth of the generated real scene image using a pre-trained depth estimation model such as MiDaS. Experimental results show that our approach performs well enough to predict real scene images corresponding to oriental landscape painting images. To the best of our knowledge, this is the first study to measure the depth of oriental landscape painting images. Our research potentially assists visually impaired people in experiencing paintings in diverse ways. We will release our code and resulting dataset.

cs.CV↗

arXiv2024

Empirical Analysis of Anomaly Detection on Hyperspectral Imaging Using Dimension Reduction Methods

Recent studies try to use hyperspectral imaging (HSI) to detect foreign matters in products because it enables to visualize the invisible wavelengths including ultraviolet and infrared. Considering the enormous image channels of the HSI, several dimension reduction methods-e.g., PCA or UMAP-can be considered to reduce but those cannot ease the fundamental limitations, as follows: (1) latency of HSI capturing. (2) less explanation ability of the important channels. In this paper, to circumvent the aforementioned methods, one of the ways to channel reduction, on anomaly detection proposed HSI. Different from feature extraction methods (i.e., PCA or UMAP), feature selection can sort the feature by impact and show better explainability so we might redesign the task-optimized and cost-effective spectroscopic camera. Via the extensive experiment results with synthesized MVTec AD dataset, we confirm that the feature selection method shows 6.90x faster at the inference phase compared with feature extraction-based approaches while preserving anomaly detection performance. Ultimately, we conclude the advantage of feature selection which is effective yet fast.

cs.CV↗

arXiv2023

Excision And Recovery: Visual Defect Obfuscation Based Self-Supervised Anomaly Detection Strategy

Due to scarcity of anomaly situations in the early manufacturing stage, an unsupervised anomaly detection (UAD) approach is widely adopted which only uses normal samples for training. This approach is based on the assumption that the trained UAD model will accurately reconstruct normal patterns but struggles with unseen anomalous patterns. To enhance the UAD performance, reconstruction-by-inpainting based methods have recently been investigated, especially on the masking strategy of suspected defective regions. However, there are still issues to overcome: 1) time-consuming inference due to multiple masking, 2) output inconsistency by random masking strategy, and 3) inaccurate reconstruction of normal patterns when the masked area is large. Motivated by this, we propose a novel reconstruction-by-inpainting method, dubbed Excision And Recovery (EAR), that features single deterministic masking based on the ImageNet pre-trained DINO-ViT and visual obfuscation for hint-providing. Experimental results on the MVTec AD dataset show that deterministic masking by pre-trained attention effectively cuts out suspected defective regions and resolve the aforementioned issues 1 and 2. Also, hint-providing by mosaicing proves to enhance the UAD performance than emptying those regions by binary masking, thereby overcomes issue 3. Our approach achieves a high UAD performance without any change of the neural network structure. Thus, we suggest that EAR be adopted in various manufacturing industries as a practically deployable solution.

cs.CV↗

arXiv2023

Neural Network Training Strategy to Enhance Anomaly Detection Performance: A Perspective on Reconstruction Loss Amplification

Unsupervised anomaly detection (UAD) is a widely adopted approach in industry due to rare anomaly occurrences and data imbalance. A desirable characteristic of an UAD model is contained generalization ability which excels in the reconstruction of seen normal patterns but struggles with unseen anomalies. Recent studies have pursued to contain the generalization capability of their UAD models in reconstruction from different perspectives, such as design of neural network (NN) structure and training strategy. In contrast, we note that containing of generalization ability in reconstruction can also be obtained simply from steep-shaped loss landscape. Motivated by this, we propose a loss landscape sharpening method by amplifying the reconstruction loss, dubbed Loss AMPlification (LAMP). LAMP deforms the loss landscape into a steep shape so the reconstruction error on unseen anomalies becomes greater. Accordingly, the anomaly detection performance is improved without any change of the NN architecture. Our findings suggest that LAMP can be easily applied to any reconstruction error metrics in UAD settings where the reconstruction model is trained with anomaly-free samples only.

cs.CV↗

arXiv2023

Edge Storage Management Recipe with Zero-Shot Data Compression for Road Anomaly Detection

Recent studies show edge computing-based road anomaly detection systems which may also conduct data collection simultaneously. However, the edge computers will have small data storage but we need to store the collected audio samples for a long time in order to update existing models or develop a novel method. Therefore, we should consider an approach for efficient storage management methods while preserving high-fidelity audio. A hardware-perspective approach, such as using a low-resolution microphone, is an intuitive way to reduce file size but is not recommended because it fundamentally cuts off high-frequency components. On the other hand, a computational file compression approach that encodes collected high-resolution audio into a compact code should be recommended because it also provides a corresponding decoding method. Motivated by this, we propose a way of simple yet effective pre-trained autoencoder-based data compression method. The pre-trained autoencoder is trained for the purpose of audio super-resolution so it can be utilized to encode or decode any arbitrary sampling rate. Moreover, it will reduce the communication cost for data transmission from the edge to the central server. Via the comparative experiments, we confirm that the zero-shot audio compression and decompression highly preserve anomaly detection performance while enhancing storage and transmission efficiency.

cs.SD↗

arXiv2023

Concise Logarithmic Loss Function for Robust Training of Anomaly Detection Model

Recently, deep learning-based algorithms are widely adopted due to the advantage of being able to establish anomaly detection models without or with minimal domain knowledge of the task. Instead, to train the artificial neural network more stable, it should be better to define the appropriate neural network structure or the loss function. For the training anomaly detection model, the mean squared error (MSE) function is adopted widely. On the other hand, the novel loss function, logarithmic mean squared error (LMSE), is proposed in this paper to train the neural network more stable. This study covers a variety of comparisons from mathematical comparisons, visualization in the differential domain for backpropagation, loss convergence in the training process, and anomaly detection performance. In an overall view, LMSE is superior to the existing MSE function in terms of strongness of loss convergence, anomaly detection performance. The LMSE function is expected to be applicable for training not only the anomaly detection model but also the general generative neural network.

cs.LG↗

arXiv2022

Frequency of Interest-based Noise Attenuation Method to Improve Anomaly Detection Performance

Accurately extracting driving events is the way to maximize computational efficiency and anomaly detection performance in the tire frictional nose-based anomaly detection task. This study proposes a concise and highly useful method for improving the precision of the event extraction that is hindered by extra noise such as wind noise, which is difficult to characterize clearly due to its randomness. The core of the proposed method is based on the identification of the road friction sound corresponding to the frequency of interest and removing the opposite characteristics with several frequency filters. Our method enables precision maximization of driving event extraction while improving anomaly detection performance by an average of 8.506%. Therefore, we conclude our method is a practical solution suitable for road surface anomaly detection purposes in outdoor edge computing environments.

cs.LG↗

arXiv2022

Non-Compression Auto-Encoder for Detecting Road Surface Abnormality via Vehicle Driving Noise

Road accident can be triggered by wet road because it decreases skid resistance. To prevent the road accident, detecting road surface abnomality is highly useful. In this paper, we propose the deep learning based cost-effective real-time anomaly detection architecture, naming with non-compression auto-encoder (NCAE). The proposed architecture can reflect forward and backward causality of time series information via convolutional operation. Moreover, the above architecture shows higher anomaly detection performance of published anomaly detection model via experiments. We conclude that NCAE as a cutting-edge model for road surface anomaly detection with 4.20\% higher AUROC and 2.99 times faster decision than before.

cs.CV↗

arXiv2022

Efficient Non-Compression Auto-Encoder for Driving Noise-based Road Surface Anomaly Detection

Wet weather makes water film over the road and that film causes lower friction between tire and road surface. When a vehicle passes the low-friction road, the accident can occur up to 35% higher frequency than a normal condition road. In order to prevent accidents as above, identifying the road condition in real-time is essential. Thus, we propose a convolutional auto-encoder-based anomaly detection model for taking both less computational resources and achieving higher anomaly detection performance. The proposed model adopts a non-compression method rather than a conventional bottleneck structured auto-encoder. As a result, the computational cost of the neural network is reduced up to 1 over 25 compared to the conventional models and the anomaly detection performance is improved by up to 7.72%. Thus, we conclude the proposed model as a cutting-edge algorithm for real-time anomaly detection.

cs.CV↗

arXiv2022

Latent Vector Expansion using Autoencoder for Anomaly Detection

Deep learning methods can classify various unstructured data such as images, language, and voice as input data. As the task of classifying anomalies becomes more important in the real world, various methods exist for classifying using deep learning with data collected in the real world. As the task of classifying anomalies becomes more important in the real world, there are various methods for classifying using deep learning with data collected in the real world. Among the various methods, the representative approach is a method of extracting and learning the main features based on a transition model from pre-trained models, and a method of learning an autoencoderbased structure only with normal data and classifying it as abnormal through a threshold value. However, if the dataset is imbalanced, even the state-of-the-arts models do not achieve good performance. This can be addressed by augmenting normal and abnormal features in imbalanced data as features with strong distinction. We use the features of the autoencoder to train latent vectors from low to high dimensionality. We train normal and abnormal data as a feature that has a strong distinction among the features of imbalanced data. We propose a latent vector expansion autoencoder model that improves classification performance at imbalanced data. The proposed method shows performance improvement compared to the basic autoencoder using imbalanced anomaly dataset.

cs.CV↗

arXiv2021

Noise Reduction and Driving Event Extraction Method for Performance Improvement on Driving Noise-based Surface Anomaly Detection

Foreign substances on the road surface, such as rainwater or black ice, reduce the friction between the tire and the surface. The above situation will reduce the braking performance and make difficult to control the vehicle body posture. In that case, there is a possibility of property damage at least. In the worst case, personal damage will be occured. To avoid this problem, a road anomaly detection model is proposed based on vehicle driving noise. However, the prior proposal does not consider the extra noise, mixed with driving noise, and skipping calculations for moments without vehicle driving. In this paper, we propose a simple driving event extraction method and noise reduction method for improving computational efficiency and anomaly detection performance.

cs.SD↗

arXiv2021

Anomaly Detection Based on Multiple-Hypothesis Autoencoder

Recently Autoencoder(AE) based models are widely used in the field of anomaly detection. A model trained with normal data generates a larger restoration error for abnormal data. Whether or not abnormal data is determined by observing the restoration error. It takes a lot of cost and time to obtain abnormal data in the industrial field. Therefore the model trains only normal data and detects abnormal data in the inference phase. However, the restoration area for the input data of AE is limited in the latent space. To solve this problem, we propose Multiple-hypothesis Autoencoder(MH-AE) model composed of several decoders. MH-AE model increases the restoration area through contention between decoders. The proposed method shows that the anomaly detection performance is improved compared to the traditional AE for various input datasets.

cs.LG↗

arXiv2021

Self-Weighted Ensemble Method to Adjust the Influence of Individual Models based on Reliability

Image classification technology and performance based on Deep Learning have already achieved high standards. Nevertheless, many efforts have conducted to improve the stability of classification via ensembling. However, the existing ensemble method has a limitation in that it requires extra effort including time consumption to find the weight for each model output. In this paper, we propose a simple but improved ensemble method, naming with Self-Weighted Ensemble (SWE), that places the weight of each model via its verification reliability. The proposed ensemble method, SWE, reduces overall efforts for constructing a classification system with varied classifiers. The performance using SWE is 0.033% higher than the conventional ensemble method. Also, the percent of performance superiority to the previous model is up to 73.333% (ratio of 8:22).

cs.CV↗