Searcharxiv⌕ Search

arXiv subjects

Yiftah Silver

Publications and source records attributed to Yiftah Silver.

18 recordsLinked to original sources
arXiv2025

Atmospheric muon flux suppression at potential new low-radiation underground physics laboratory in Israel

The residual atmospheric muon flux was measured at a candidate site for a new underground, low-radiation physics laboratory beneath the Kokhav HaYarden national park in Israel. Located inside the tunnels of a hydroelectric pumped-storage facility operating since 2024, the proposed site benefits from a vertical rock overburden of 361 meters, large potential floorspace, and easy access by road. A muon hodoscope of vertically stacked wide-area $144 \times 60 \times 1.2 $ cm$^3$ plastic scintillator plates was employed to measure the suppression in the integrated muon flux at the site as compared with above ground at sea level. Data-taking took place in mid-August of 2024 for several days and was split into South-North and West-East orientations to account for the directional acceptances due to the geometry of the detector. The suppression factor is reported at $4456 \pm 77$, expressed as $3.75 \pm 0.06 \times 10^{-6}$ cm$^{-2}$ s$^{-1}$ in absolute terms, corresponding to an effective overburden of roughly $873$ m.w.e.. A deeper location at the site may also be available, but it could not be reached at this time. Furthermore, the asymmetric topography of the mountain above and its muon shadow are clearly visible in the angular data. Finally, auxiliary environmental measurements recorded low background radon activity at $28.3 \pm 14.0$ Bq m$^{-3}$. The experimental campaign thus succeeded in demonstrating the viability of the site's working conditions for future scientific research.

physics.ins-det↗
arXiv2025

First Demonstration of Underground Muon Imaging at an Archaeological Site in Ancient Jerusalem

We present a novel underground imaging system that utilizes cosmic-ray muons to explore the subsurface environment at the City of David archaeological site in ancient Jerusalem. This report details the initial findings from measurements conducted at a large cistern, commonly called "Jeremiah's cistern" (referenced in Jeremiah 38:6). The system aims to locate and map hidden voids and structural anomalies within the overburden. Our primary outcome is the derivation of the angular ground depth, which serves as a proxy for understanding the integrated density distribution of the overburden. This work represents a significant interdisciplinary effort to deepen our understanding of this historically important site.

physics.app-ph↗
arXiv2025

MATHUSLA: An External Long-Lived Particle Detector to Maximize the Discovery Potential of the HL-LHC

We present the current status of the MATHUSLA (MAssive Timing Hodoscope for Ultra-Stable neutraL pArticles) long-lived particle (LLP) detector at the HL-LHC, covering the design, fabrication and installation at CERN Point 5. MATHUSLA40 is a 40 m-scale detector with an air-filled decay volume that is instrumented with scintillator tracking detectors, to be located near CMS. Its large size, close proximity to the CMS interaction point and about 100 m of rock shielding from LHC backgrounds allows it to detect LLP production rates and lifetimes that are one to two orders of magnitude beyond the ultimate reach of the LHC main detectors. This provides unique sensitivity to many LLP signals that are highly theoretically motivated, due to their connection to the hierarchy problem, the nature of dark matter, and baryogenesis. Data taking is projected to commence with the start of HL-LHC operations. We summarize the new 40m design for the detector that was recently presented in the MATHUSLA Conceptual Design Report, alongside new realistic background and signal simulations that demonstrate high efficiency for the main target LLP signals in a background-free HL-LHC search. We argue that MATHUSLA's uniquely robust expansion of the HL-LHC physics reach is a crucial ingredient in CERN's mission to search for new physics and characterize the Higgs boson with precision.

physics.ins-det↗
arXiv2025

Conceptual Design Report for the MATHUSLA Long-Lived Particle Detector near CMS

We present the Conceptual Design Report (CDR) for the MATHUSLA (MAssive Timing Hodoscope for Ultra-Stable neutraL pArticles) long-lived particle detector at the HL-LHC, covering the design, fabrication and installation at CERN Point 5. MATHUSLA is a 40 m-scale detector with an air-filled decay volume that is instrumented with scintillator tracking detectors, to be located near CMS. Its large size, close proximity to the CMS interaction point and about 100 m of rock shielding from HL-LHC backgrounds allows it to detect LLP production rates and lifetimes that are one to two orders of magnitude beyond the ultimate sensitivity of the HL-LHC main detectors for many highly motivated LLP signals. Data taking is projected to commence with the start of HL-LHC operations. We present a new 40m design for the detector: its individual scintillator bars and wavelength-shifting fibers, their organization into tracking layers, tracking modules, tower modules and the veto detector; define a high-level design for the supporting electronics, DAQ and trigger system, including supplying a hardware trigger signal to CMS to record the LLP production event; outline computing systems, civil engineering and safety considerations; and present preliminary cost estimates and timelines for the project. We also conduct detailed simulation studies of the important cosmic ray and HL-LHC muon backgrounds, implementing full track/vertex reconstruction and background rejection, to ultimately demonstrate high signal efficiency and $\ll 1$ background event in realistic LLP searches for the main physics targets at MATHUSLA. This sensitivity is robust with respect to detector design or background simulation details. Appendices provide various supplemental information.

physics.ins-det↗
arXiv2022

Muon Detector for Underground Tomography

We utilise muons from cosmic ray to explore hidden underground archaeological structures. Presented here is the design, simulation studies and first laboratory results of a compact, scintillators based, cosmic ray muon telescope for underground muon radiography.

physics.ins-det↗
arXiv2022

Recent Progress and Next Steps for the MATHUSLA LLP Detector

We report on recent progress and next steps in the design of the proposed MATHUSLA Long Lived Particle (LLP) detector for the HL-LHC as part of the Snowmass 2021 process. Our understanding of backgrounds has greatly improved, aided by detailed simulation studies, and significant R&D has been performed on designing the scintillator detectors and understanding their performance. The collaboration is on track to complete a Technical Design Report, and there are many opportunities for interested new members to contribute towards the goal of designing and constructing MATHUSLA in time for HL-LHC collisions, which would increase the sensitivity to a large variety of highly motivated LLP signals by orders of magnitude.

hep-ex↗
arXiv2020

The MATHUSLA Test Stand

The rate of muons from LHC $pp$ collisions reaching the surface above the ATLAS interaction point is measured and compared with expected rates from decays of $W$ and $Z$ bosons and $b$- and $c$-quark jets. In addition, data collected during periods without beams circulating in the LHC provide a measurement of the background from cosmic ray inelastic backscattering that is compared to simulation predictions. Data were recorded during 2018 in a 2.5 $\times$ 2.5 $\times$ 6.5~$\rm{m}^3$ active volume MATHUSLA test stand detector unit consisting of two scintillator planes, one at the top and one at the bottom, which defined the trigger, and six layers of RPCs between them, grouped into three $(x,y)$-measuring layers separated by 1.74 m from each other. Triggers selecting both upward-going tracks and downward-going tracks were used.

physics.ins-det↗
arXiv2020

An Update to the Letter of Intent for MATHUSLA: Search for Long-Lived Particles at the HL-LHC

We report on recent progress in the design of the proposed MATHUSLA Long Lived Particle (LLP) detector for the HL-LHC, updating the information in the original Letter of Intent (LoI), see CDS:LHCC-I-031, arXiv:1811.00927. A suitable site has been identified at LHC Point 5 that is closer to the CMS Interaction Point (IP) than assumed in the LoI. The decay volume has been increased from 20 m to 25 m in height. Engineering studies have been made in order to locate much of the decay volume below ground, bringing the detector even closer to the IP. With these changes, a 100 m x 100 m detector has the same physics reach for large c$τ$ as the 200 m x 200 m detector described in the LoI and other studies. The performance for small c$τ$ is improved because of the proximity to the IP. Detector technology has also evolved while retaining the strip-like sensor geometry in Resistive Plate Chambers (RPC) described in the LoI. The present design uses extruded scintillator bars read out using wavelength shifting fibers and silicon photomultipliers (SiPM). Operations will be simpler and more robust with much lower operating voltages and without the use of greenhouse gases. Manufacturing is straightforward and should result in cost savings. Understanding of backgrounds has also significantly advanced, thanks to new simulation studies and measurements taken at the MATHUSLA test stand operating above ATLAS in 2018. We discuss next steps for the MATHUSLA collaboration, and identify areas where new members can make particularly important contributions.

physics.ins-det↗
arXiv2020

Liquid Scintillators for Large Area Tracking System

We report on studies of non-toxic scintillating liquid useful for large surface detectors. Arrays of liquid scintillators offer a rather simple tool for detecting charged particles traversing a surface and tracking their path through a defined volume. Insertion of wavelength shifting fibres along the liquid scintillating containers significantly improves the light collection at the two ends of the scintillators. We have demonstrated that we can achieve timing resolution of O(1 ns) allowing good spatial resolution. Liquid scintillators with fibres read by Photo-multipliers or SiPMs provide an inexpensive alternative technology which suits well the requirement of the MATHUSLA experiment tracking system.

physics.ins-det↗
arXiv2019

MATHUSLA: A Detector Proposal to Explore the Lifetime Frontier at the HL-LHC

The observation of long-lived particles at the LHC would reveal physics beyond the Standard Model, could account for the many open issues in our understanding of our universe, and conceivably point to a more complete theory of the fundamental interactions. Such long-lived particle signatures are fundamentally motivated and can appear in virtually every theoretical construct that address the Hierarchy Problem, Dark Matter, Neutrino Masses and the Baryon Asymmetry of the Universe. We describe in this document a large detector, MATHUSLA, located on the surface above an HL-LHC $pp$ interaction point, that could observe long-lived particles with lifetimes up to the Big Bang Nucleosynthesis limit of 0.1 s. We also note that its large detector area allows MATHUSLA to make important contributions to cosmic ray physics. Because of the potential for making a major breakthrough in our conceptual understanding of the universe, long-lived particle searches should have the highest level of priority.

hep-ex↗
arXiv2018

A Letter of Intent for MATHUSLA: a dedicated displaced vertex detector above ATLAS or CMS

In this Letter of Intent (LOI) we propose the construction of MATHUSLA (MAssive Timing Hodoscope for Ultra-Stable neutraL pArticles), a dedicated large-volume displaced vertex detector for the HL-LHC on the surface above ATLAS or CMS. Such a detector, which can be built using existing technologies with a reasonable budget in time for the HL-LHC upgrade, could search for neutral long-lived particles (LLPs) with up to several orders of magnitude better sensitivity than ATLAS or CMS, while also acting as a cutting-edge cosmic ray telescope at CERN to explore many open questions in cosmic ray and astro-particle physics. We review the physics motivations for MATHUSLA and summarize its LLP reach for several different possible detector geometries, as well as outline the cosmic ray physics program. We present several updated background studies for MATHUSLA, which help inform a first detector-design concept utilizing modular construction with Resistive Plate Chambers (RPCs) as the primary tracking technology. We present first efficiency and reconstruction studies to verify the viability of this design concept, and we explore some aspects of its total cost. We end with a summary of recent progress made on the MATHUSLA test stand, a small-scale demonstrator experiment currently taking data at CERN Point 1, and finish with a short comment on future work.

physics.ins-det↗
arXiv2013

Plasma panel-based radiation detectors

The plasma panel sensor (PPS) is a gaseous micropattern radiation detector under current development. It has many operational and fabrication principles common to plasma display panels. It comprises a dense matrix of small, gas plasma discharge cells within a hermetically sealed panel. As in plasma display panels, it uses nonreactive, intrinsically radiation-hard materials such as glass substrates, refractory metal electrodes, and mostly inert gas mixtures. We are developing these devices primarily as thin, low-mass detectors with gas gaps from a few hundred microns to a few millimeters. The PPS is a high gain, inherently digital device with the potential for fast response times, fine position resolution (<50-mm RMS) and low cost. In this paper, we report on prototype PPS experimental results in detecting betas, protons, and cosmic muons, and we extrapolate on the PPS potential for applications including the detection of alphas, heavy ions at low-to-medium energy, thermal neutrons, and X-rays.

physics.ins-det↗
arXiv2012

Plasma Panel Sensors for Particle and Beam Detection

The plasma panel sensor (PPS) is an inherently digital, high gain, novel variant of micropattern gas detectors inspired by many operational and fabrication principles common to plasma display panels (PDPs). The PPS is comprised of a dense array of small, plasma discharge, gas cells within a hermetically-sealed glass panel, and is assembled from non-reactive, intrinsically radiation-hard materials such as glass substrates, metal electrodes and mostly inert gas mixtures. We are developing the technology to fabricate these devices with very low mass and small thickness, using gas gaps of at least a few hundred micrometers. Our tests with these devices demonstrate a spatial resolution of about 1 mm. We intend to make PPS devices with much smaller cells and the potential for much finer position resolutions. Our PPS tests also show response times of several nanoseconds. We report here our results in detecting betas, cosmic-ray muons, and our first proton beam tests.

physics.ins-det↗
arXiv2012

Development of a plasma panel radiation detector: recent progress and key issues

A radiation detector based on plasma display panel technology, which is the principal component of plasma television displays is presented. Plasma Panel Sensor (PPS) technology is a variant of micropattern gas radiation detectors. The PPS is conceived as an array of sealed plasma discharge gas cells which can be used for fast response (O(5ns) per pixel), high spatial resolution detection (pixel pitch can be less than 100 micrometer) of ionizing and minimum ionizing particles. The PPS is assembled from non-reactive, intrinsically radiation-hard materials: glass substrates, metal electrodes and inert gas mixtures. We report on the PPS development program, including simulations and design and the first laboratory studies which demonstrate the usage of plasma display panels in measurements of cosmic ray muons, as well as the expansion of experimental results on the detection of betas from radioactive sources.

physics.ins-det↗
arXiv2010

Progress in the Development of Plasma Panel Radiation Detectors

Plasma Display Panels (PDP), the underlying engine of panel plasma television displays, are being investigated for their utility as radiation detectors called Plasma Panel Sensors (PPS). The PPS a novel variant of a micropattern radiation detector, is intended to be a fast, high resolution detector comprised of an array of plasma discharge cells operating in a hermetically sealed gas mixture. We report on the PPS development effort, including recent laboratory measurements.

physics.ins-det↗
arXiv2010

A search for heavy Kaluza-Klein electroweak gauge bosons at the LHC

The feasibility for the observation of a certain leptonic Kaluza-Klein (KK) hard process in {\em pp} interactions at the LHC is presented. Within the $S^1/Z_2$ TeV$^{-1}$ extra dimensional theoretical framework with the focus on the KK excitations of the Standard Model $γ$ and $Z^0$ gauge bosons, the hard-process, $f\bar f \to \sum_n\left(γ^*/Z^*\right)_n \to F \bar F$, has been used where $f$ is the initial state parton, $F$ the final state lepton and $\left(γ^*/Z^*\right)_{n}$ is the $n^{\rm th}$ KK excitation of the $γ/Z^0$ boson. For this study the analytic form for the hard process cross section has been independently calculated by the authors and has been implemented using the {\sc Moses} framework. The Moses framework itself, that has been written by the authors, was used as an external process within the {\sc Pythia} Monte Carlo generator which provides the phase space generation for the final state leptons and partons from the initial state hadrons, and the simulation of initial and final state radiation and hadronization. A brief discussion of the possibility for observing and identifying the unique signature of the KK signal given the current LHC program is also presented.

hep-ex↗