arXiv subjects

Yong Liang Guan

Publications and source records attributed to Yong Liang Guan.

At least 91 records · Page 5Linked to original sources

arXiv2023

OTFS Signaling for SCMA With Coordinated Multi-Point Vehicle Communications

This paper investigates an uplink coordinated multi-point (CoMP) coverage scenario, in which multiple mobile users are grouped for sparse code multiple access (SCMA), and served by the remote radio head (RRH) in front of them and the RRH behind them simultaneously. We apply orthogonal time frequency space (OTFS) modulation for each user to exploit the degrees of freedom arising from both the delay and Doppler domains. As the signals received by the RRHs in front of and behind the users experience respectively positive and negative Doppler frequency shifts, our proposed OTFS-based SCMA (OBSCMA) with CoMP system can effectively harvest extra Doppler and spatial diversity for better performance. Based on maximum likelihood (ML) detector, we analyze the single-user average bit error rate (ABER) bound as the benchmark of the ABER performance for our proposed OBSCMA with CoMP system. We also develop a customized Gaussian approximation with expectation propagation (GAEP) algorithm for multi-user detection and propose efficient algorithm structures for centralized and decentralized detectors. Our proposed OBSCMA with CoMP system leads to stronger performance than the existing solutions. The proposed centralized and decentralized detectors exhibit effective reception and robustness under channel state information uncertainty.

eess.SP↗

arXiv2022

Design of Protograph LDPC-Coded MIMO-VLC Systems with Generalized Spatial Modulation

This paper investigates the bit-interleaved coded generalized spatial modulation (BICGSM) with iterative decoding (BICGSM-ID) for multiple-input multiple-output (MIMO) visible light communications (VLC). In the BICGSM-ID scheme, the information bits conveyed by the signal-domain (SiD) symbols and the spatial-domain (SpD) light emitting diode (LED)-index patterns are coded by a protograph low-density parity-check (P-LDPC) code. Specifically, we propose a signal-domain symbol expanding and re-allocating (SSER) method for constructing a type of novel generalized spatial modulation (GSM) constellations, referred to as SSERGSM constellations, so as to boost the performance of the BICGSM-ID MIMO-VLC systems. Moreover, by applying a modified PEXIT (MPEXIT) algorithm, we further design a family of rate-compatible P-LDPC codes, referred to as enhanced accumulate-repeat-accumulate (EARA) codes, which possess both excellent decoding thresholds and linear-minimum-distance-growth property. Both analysis and simulation results illustrate that the proposed SSERGSM constellations and P-LDPC codes can remarkably improve the convergence and decoding performance of MIMO-VLC systems. Therefore, the proposed P-LDPC-coded SSERGSM-mapped BICGSM-ID configuration is envisioned as a promising transmission solution to satisfy the high-throughput requirement of MIMO-VLC applications.

cs.IT↗

arXiv2022

Protograph Bit-Interleaved Coded Modulation: A Bandwidth-Efficient Design Paradigm for 6G Wireless Communications

Bit-interleaved coded modulation (BICM) has attracted considerable attention from the research community in the past three decades, because it can achieve desirable error performance with relatively low implementation complexity for a large number of communication and storage systems. By exploiting the iterative demapping and decoding (ID), the BICM is able to approach capacity limits of coded modulation over various channels. In recent years, protograph low-density parity-check (PLDPC) codes and their spatially-coupled (SC) variants have emerged to be a pragmatic forward-error-correction (FEC) solution for BICM systems due to their tremendous error-correction capability and simple structures, and found widespread applications such as deep-space communication, satellite communication, wireless communication, optical communication, and data storage. This article offers a comprehensive survey on the state-of-the-art development of PLDPC-BICM and its innovative SC variants over a variety of channel models, e.g., additive white Gaussian noise (AWGN) channels, fading channels, Poisson pulse position modulation (PPM) channels, and flash-memory channels. Of particular interest is code construction, constellation shaping, as well as bit-mapper design, where the receiver is formulated as a serially-concatenated decoding framework consisting of a soft-decision demapper and a belief-propagation decoder. Finally, several promising research directions are discussed, which have not been adequately addressed in the current literature.

cs.IT↗

arXiv2022

Capacity Optimal Generalized Multi-User MIMO: A Theoretical and Practical Framework

Conventional multi-user multiple-input multiple-output (MU-MIMO) mainly focused on Gaussian signaling, independent and identically distributed (IID) channels, and a limited number of users. It will be laborious to cope with the heterogeneous requirements in next-generation wireless communications, such as various transmission data, complicated communication scenarios, and massive user access. Therefore, this paper studies a generalized MU-MIMO (GMU-MIMO) system with more practical constraints, i.e., non-Gaussian signaling, non-IID channel, and massive users and antennas. These generalized assumptions bring new challenges in theory and practice. For example, there is no accurate capacity analysis for GMU-MIMO. In addition, it is unclear how to achieve the capacity optimal performance with practical complexity. To address these challenges, a unified framework is proposed to derive the GMU-MIMO capacity and design a capacity optimal transceiver, which jointly considers encoding, modulation, detection, and decoding. Group asymmetry is developed to make a tradeoff between user rate allocation and implementation complexity. Specifically, the capacity region of group asymmetric GMU-MIMO is characterized by using the celebrated mutual information and minimum mean-square error (MMSE) lemma and the MMSE optimality of orthogonal approximate message passing (OAMP)/vector AMP (VAMP). Furthermore, a theoretically optimal multi-user OAMP/VAMP receiver and practical multi-user low-density parity-check (MU-LDPC) codes are proposed to achieve the capacity region of group asymmetric GMU-MIMO. Numerical results verify that the gaps between theoretical detection thresholds of the proposed framework with optimized MU-LDPC codes and QPSK modulation and the sum capacity of GMU-MIMO are about 0.2 dB. Moreover, their finite-length performances are about 1~2 dB away from the associated sum capacity.

cs.IT↗

arXiv2022

Capacity Optimal Coded Generalized MU-MIMO

With the complication of future communication scenarios, most conventional signal processing technologies of multi-user multiple-input multiple-output (MU-MIMO) become unreliable, which are designed based on ideal assumptions, such as Gaussian signaling and independent identically distributed (IID) channel matrices. As a result, this paper considers a generalized MU-MIMO (GMU-MIMO) system with more general assumptions, i.e., arbitrarily fixed input distributions, and general unitarily-invariant channel matrices. However, there is still no accurate capacity analysis and capacity optimal transceiver with practical complexity for GMU-MIMO under the constraint of coding. To address these issues, inspired by the replica method, the constrained sum capacity of coded GMU-MIMO with fixed input distribution is calculated by using the celebrated mutual information and minimum mean-square error (MMSE) lemma and the MMSE optimality of orthogonal/vector approximate message passing (OAMP/VAMP). Then, a capacity optimal multiuser OAMP/VAMP receiver is proposed, whose achievable rate is proved to be equal to the constrained sum capacity. Moreover, a design principle of multi-user codes is presented for the multiuser OAMP/VAMP, based on which a kind of practical multi-user low-density parity-check (MU-LDPC) code is designed. Numerical results show that finite-length performances of the proposed MU-LDPC codes with multi-user OAMP/VAMP are about 2 dB away from the constrained sum capacity and outperform those of the existing state-of-art methods.

cs.IT↗

arXiv2022

Federated Spectrum Learning for Reconfigurable Intelligent Surfaces-Aided Wireless Edge Networks

Increasing concerns on intelligent spectrum sensing call for efficient training and inference technologies. In this paper, we propose a novel federated learning (FL) framework, dubbed federated spectrum learning (FSL), which exploits the benefits of reconfigurable intelligent surfaces (RISs) and overcomes the unfavorable impact of deep fading channels. Distinguishingly, we endow conventional RISs with spectrum learning capabilities by leveraging a fully-trained convolutional neural network (CNN) model at each RIS controller, thereby helping the base station to cooperatively infer the users who request to participate in FL at the beginning of each training iteration. To fully exploit the potential of FL and RISs, we address three technical challenges: RISs phase shifts configuration, user-RIS association, and wireless bandwidth allocation. The resulting joint learning, wireless resource allocation, and user-RIS association design is formulated as an optimization problem whose objective is to maximize the system utility while considering the impact of FL prediction accuracy. In this context, the accuracy of FL prediction interplays with the performance of resource optimization. In particular, if the accuracy of the trained CNN model deteriorates, the performance of resource allocation worsens. The proposed FSL framework is tested by using real radio frequency (RF) traces and numerical results demonstrate its advantages in terms of spectrum prediction accuracy and system utility: a better CNN prediction accuracy and FL system utility can be achieved with a larger number of RISs and reflecting elements.

cs.NI↗

arXiv2021

Collaborative Radio SLAM for Multiple Robots based on WiFi Fingerprint Similarity

Simultaneous Localization and Mapping (SLAM) enables autonomous robots to navigate and execute their tasks through unknown environments. However, performing SLAM in large environments with a single robot is not efficient, and visual or LiDAR-based SLAM requires feature extraction and matching algorithms, which are computationally expensive. In this paper, we present a collaborative SLAM approach with multiple robots using the pervasive WiFi radio signals. A centralized solution is proposed to optimize the trajectory based on the odometry and radio fingerprints collected from multiple robots. To improve the localization accuracy, a novel similarity model is introduced that combines received signal strength (RSS) and detection likelihood of an access point (AP). We perform extensive experiments to demonstrate the effectiveness of the proposed similarity model and collaborative SLAM framework.

cs.RO↗

arXiv2021

A Blockchain based Federated Learning for Message Dissemination in Vehicular Networks

Message exchange among vehicles plays an important role in ensuring road safety. Emergency message dissemination is usually carried out by broadcasting. However, high vehicle density and mobility usually lead to challenges in message dissemination such as broadcasting storm and low probability of packet reception. This paper proposes a federated learning based blockchain-assisted message dissemination solution. Similar to the incentive-based Proof-of-Work consensus in blockchain, vehicles compete to become a relay node (miner) by processing the proposed Proof-of-Federated-Learning (PoFL) consensus which is embedded in the smart contract of blockchain. Both theoretical and practical analysis of the proposed solution are provided. Specifically, the proposed blockchain based federated learning results in more number of vehicles uploading their models in a given time, which can potentially lead to a more accurate model in less time as compared to the same solution without using blockchain. It also outperforms the other blockchain approaches for message dissemination by reducing 65.2% of time delay in consensus, improving at least 8.2% message delivery rate and preserving privacy of neighbor vehicle more efficiently. The economic model to incentivize vehicles participating in federated learning and message dissemination is further analyzed using Stackelberg game model.

cs.CR↗

arXiv2021

Spectrum Learning-Aided Reconfigurable Intelligent Surfaces for 'Green' 6G Networks

In the sixth-generation (6G) era, emerging large-scale computing based applications (for example processing enormous amounts of images in real-time in autonomous driving) tend to lead to excessive energy consumption for the end users, whose devices are usually energy-constrained. In this context, energy-efficiency becomes a critical challenge to be solved for harnessing these promising applications to realize 'green' 6G networks. As a remedy, reconfigurable intelligent surfaces (RIS) have been proposed for improving the energy efficiency by beneficially reconfiguring the wireless propagation environment. In conventional RIS solutions, however, the received signal-to-interference-plus-noise ratio (SINR) sometimes may even become degraded. This is because the signals impinging upon an RIS are typically contaminated by interfering signals which are usually dynamic and unknown. To address this issue, `learning' the properties of the surrounding spectral environment is a promising solution, motivating the convergence of artificial intelligence and spectrum sensing, termed here as spectrum learning (SL). Inspired by this, we develop an SL-aided RIS framework for intelligently exploiting the inherent characteristics of the radio frequency (RF) spectrum for green 6G networks. Given the proposed framework, the RIS controller becomes capable of intelligently `{think-and-decide}' whether to reflect or not the incident signals. Therefore, the received SINR can be improved by dynamically configuring the binary ON-OFF status of the RIS elements. The energy-efficiency benefits attained are validated with the aid of a specific case study. Finally, we conclude with a list of promising future research directions.

eess.SP↗

arXiv2020

Perturbed Adaptive Belief Propagation Decoding for High-Density Parity-Check Codes

Algebraic codes such as BCH code are receiving renewed interest as their short block lengths and low/no error floors make them attractive for ultra-reliable low-latency communications (URLLC) in 5G wireless networks. This paper aims at enhancing the traditional adaptive belief propagation (ABP) decoding, which is a soft-in-soft-out (SISO) decoding for high-density parity-check (HDPC) algebraic codes, such as Reed-Solomon (RS) codes, Bose-Chaudhuri-Hocquenghem (BCH) codes, and product codes. The key idea of traditional ABP is to sparsify certain columns of the parity-check matrix corresponding to the least reliable bits with small log-likelihood-ratio (LLR) values. This sparsification strategy may not be optimal when some bits have large LLR magnitudes but wrong signs. Motivated by this observation, we propose a Perturbed ABP (P-ABP) to incorporate a small number of unstable bits with large LLRs into the sparsification operation of the parity-check matrix. In addition, we propose to apply partial layered scheduling or hybrid dynamic scheduling to further enhance the performance of P-ABP. Simulation results show that our proposed decoding algorithms lead to improved error correction performances and faster convergence rates than the prior-art ABP variants.

cs.IT↗

arXiv2020

Edge Intelligence for Autonomous Driving in 6G Wireless System: Design Challenges and Solutions

In a level-5 autonomous driving system, the autonomous driving vehicles (AVs) are expected to sense the surroundings via analyzing a large amount of data captured by a variety of onboard sensors in near-real-time. As a result, enormous computing costs will be introduced to the AVs for processing the tasks with the deployed machine learning (ML) model, while the inference accuracy may not be guaranteed. In this context, the advent of edge intelligence (EI) and sixth-generation (6G) wireless networking are expected to pave the way to more reliable and safer autonomous driving by providing multi-access edge computing (MEC) together with ML to AVs in close proximity. To realize this goal, we propose a two-tier EI-empowered autonomous driving framework. In the autonomous-vehicles tier, the autonomous vehicles are deployed with the shallow layers by splitting the trained deep neural network model. In the edge-intelligence tier, an edge server is implemented with the remaining layers (also deep layers) and an appropriately trained multi-task learning (MTL) model. In particular, obtaining the optimal offloading strategy (including the binary offloading decision and the computational resources allocation) can be formulated as a mixed-integer nonlinear programming (MINLP) problem, which is solved via MTL in near-real-time with high accuracy. On another note, an edge-vehicle joint inference is proposed through neural network segmentation to achieve efficient online inference with data privacy-preserving and less communication delay. Experiments demonstrate the effectiveness of the proposed framework, and open research topics are finally listed.

cs.NI↗

arXiv2020

Blockchain for the Internet of Vehicles towards Intelligent Transportation Systems: A Survey

Internet of Vehicles (IoV) is an emerging concept that is believed to help realise the vision of intelligent transportation systems (ITS). IoV has become an important research area of impactful applications in recent years due to the rapid advancements in vehicular technologies, high throughput satellite communication, Internet of Things and cyber-physical systems. IoV enables the integration of smart vehicles with the Internet and system components attributing to their environment such as public infrastructures, sensors, computing nodes, pedestrians and other vehicles. By allowing the development of a common information exchange platform between vehicles and heterogeneous vehicular networks, this integration aims to create a better environment and public space to the people as well as to enhance safety for all road users. Being a participatory data exchange and storage, the underlying information exchange platform of IoV needs to be secure, transparent and immutable in order to achieve the intended objectives of ITS. In this connection, the adoption of blockchain as a system platform for supporting the information exchange needs of IoV has been explored. Due to their decentralized and immutable nature, IoV applications enabled by blockchain are believed to have a number of desirable properties such as decentralization, security, transparency, immutability, and automation. In this paper, we present a contemporary survey on the latest advancement in blockchain for IoV. Particularly, we highlight the different application scenarios of IoV after carefully reviewing the recent literatures. We also investigate several key challenges where blockchain is applied in IoV. Furthermore, we present the future opportunities and explore further research directions of IoV as a key enabler of ITS.

cs.CR↗

arXiv2020

Communication and Computing Resource Optimization for Connected Autonomous Driving

Transportation system is facing a sharp disruption since the Connected Autonomous Vehicles (CAVs) can free people from driving and provide good driving experience with the aid of Vehicle-to-Vehicle (V2V) communications. Although CAVs bring benefits in terms of driving safety, vehicle string stability, and road traffic throughput, most existing work aims at improving only one of these performance metrics. However, these metrics may be mutually competitive, as they share the same communication and computing resource in a road segment. From the perspective of joint optimizing driving safety, vehicle string stability, and road traffic throughput, there is a big research gap to be filled on the resource management for connected autonomous driving. In this paper, we first explore the joint optimization on driving safety, vehicle string stability, and road traffic throughput by leveraging on the consensus Alternating Directions Method of Multipliers algorithm (ADMM). However, the limited communication bandwidth and on-board processing capacity incur the resource competition in CAVs. We next analyze the multiple tasks competition in the contention based medium access to attain the upper bound delay of V2V-related application offloading. An efficient sleeping multi-armed bandit tree-based algorithm is proposed to address the resource assignment problem. A series of simulation experiments are carried out to validate the performance of the proposed algorithms.

cs.IT↗

arXiv2020

User Activity Detection and Channel Estimation for Grant-Free Random Access in LEO Satellite-Enabled Internet-of-Things

With recent advances on the dense low-earth orbit (LEO) constellation, LEO satellite network has become one promising solution to providing global coverage for Internet-of-Things (IoT) services. Confronted with the sporadic transmission from randomly activated IoT devices, we consider the random access (RA) mechanism, and propose a grant-free RA (GF-RA) scheme to reduce the access delay to the mobile LEO satellites. A Bernoulli-Rician message passing with expectation maximization (BR-MP-EM) algorithm is proposed for this terrestrial-satellite GF-RA system to address the user activity detection (UAD) and channel estimation (CE) problem. This BR-MP-EM algorithm is divided into two stages. In the inner iterations, the Bernoulli messages and Rician messages are updated for the joint UAD and CE problem. Based on the output of the inner iterations, the expectation maximization (EM) method is employed in the outer iterations to update the hyper-parameters related to the channel impairments. Finally, simulation results show the UAD and CE accuracy of the proposed BR-MP-EM algorithm, as well as the robustness against the channel impairments.

cs.IT↗

arXiv2020

Thermodynamically Stable DNA Code Design using a Similarity Significance Model

DNA code design aims to generate a set of DNA sequences (codewords) with minimum likelihood of undesired hybridizations among sequences and their reverse-complement (RC) pairs (cross-hybridization). Inspired by the distinct hybridization affinities (or stabilities) of perfect double helix constructed by individual single-stranded DNA (ssDNA) and its RC pair, we propose a novel similarity significance (SS) model to measure the similarity between DNA sequences. Particularly, instead of directly measuring the similarity of two sequences by any metric/approach, the proposed SS works in a way to evaluate how more likely will the undesirable hybridizations occur over the desirable hybridizations in the presence of the two measured sequences and their RC pairs. With this SS model, we construct thermodynamically stable DNA codes subject to several combinatorial constraints using a sorting-based algorithm. The proposed scheme results in DNA codes with larger code sizes and wider free energy gaps (hence better cross-hybridization performance) compared to the existing methods.

cs.IT↗

arXiv2020

New Complementary Sets with Low PAPR Property under Spectral Null Constraints

Complementary set sequences (CSSs) are useful for dealing with the high peak-to-average power ratio (PAPR) problem in orthogonal frequency division multiplexing (OFDM) systems. In practical OFDM transmission, however, certain sub-carriers maybe reserved and/or prohibited to transmit signals, leading to the so-called \emph{spectral null constraint} (SNC) design problem. For example, the DC sub-carrier is reserved to avoid the offsets in D/A and A/D converter in the LTE systems. While most of the current research focus on the design of low PAPR CSSs to improve the code-rate, few works address the aforementioned SNC in their designs. This motivates us to investigate CSSs with SNC as well as low PAPR property. In this paper, we present systematic constructions of CSSs under SNCs and low PAPR. First, we show that mutually orthogonal complementary sets (MOCSs) can be used as \emph{seed sequences} to generate new CSSs with SNC and low PAPR, and then provide an iterative technique for the construction of MOCSs which can be further used to generate complementary sets (CSs) with low PAPRs and spectral nulls at \emph{varying} positions in the designed sequences. Next, inspired by a recent idea of Chen, we propose a novel construction of these \emph{seed} MOCSs with non-power-of-two lengths from generalized Boolean functions.

cs.IT↗

arXiv2020

Random NOMA With Cross-Slot Successive Interference Cancellation Packet Recovery

Conventional power-domain non-orthogonal multiple access (NOMA) relies on precise power control, which requires real-time channel state information at transmitters. This requirement severely limits its application to future wireless communication systems. To address this problem, we consider NOMA without power allocation, where we exploit the random channel fading and opportunistically perform successive interference cancellation (SIC) detection. To mitigate the multi-user interference, we propose a random NOMA where users randomly transmit their data packets with a certain probability. Then a cross-slot SIC packet recovery scheme is proposed to recover transmitted data packets. We model the cross-slot SIC packet recovery as a Markov process, and provide a throughput analysis, based on which the sum rate is maximized by jointly optimizing the transmission probability and the encoding rate of users.

cs.IT↗

arXiv2020

Low-PMEPR Preamble Sequence Design for Dynamic Spectrum Allocation in OFDMA Systems

Orthogonal Frequency Division Multiple Access (OFDMA) with Dynamic spectrum allocation (DSA) is able to provide a wide range of data rate requirements. This paper is focused on the design of preamble sequences in OFDMA systems with low peak-to-mean envelope power ratio (PMEPR) property in the context of DSA. We propose a systematic preamble sequence design which gives rise to low PMEPR for possibly non-contiguous spectrum allocations. With the aid of Golay-Davis-Jedwab (GDJ) sequences, two classes of preamble sequences are presented. We prove that their PMEPRs are upper bounded by 4 for any DSA over a chunk of four contiguous resource blocks.

cs.IT↗