arXiv subjects

Yong Zeng

Publications and source records attributed to Yong Zeng.

At least 73 records · Page 4Linked to original sources

arXiv2025

CKMImageNet: A Dataset for AI-Based Channel Knowledge Map Towards Environment-Aware Communication and Sensing

With the increasing demand for real-time channel state information (CSI) in sixth-generation (6G) mobile communication networks, channel knowledge map (CKM) emerges as a promising technique, offering a site-specific database that enables environment-awareness and significantly enhances communication and sensing performance by leveraging a priori wireless channel knowledge. However, efficient construction and utilization of CKMs require high-quality, massive, and location-specific channel knowledge data that accurately reflects the real-world environments. Inspired by the great success of ImageNet dataset in advancing computer vision and image understanding in artificial intelligence (AI) community, we introduce CKMImageNet, a dataset developed to bridge AI and environment-aware wireless communications and sensing by integrating location-specific channel knowledge data, high-fidelity environmental maps, and their visual representations. CKMImageNet supports a wide range of AI-driven approaches for CKM construction with spatially consistent and location-specific channel knowledge data, including both supervised and unsupervised, as well as discriminative and generative AI methods.

eess.SP↗

arXiv2025

How Does CP Length Affect the Sensing Range for OFDM-ISAC?

Orthogonal frequency division multiplexing (OFDM), which has been the dominating waveform for contemporary wireless communications, is also regarded as a competitive candidate for future integrated sensing and communication (ISAC) systems. Existing works on OFDM-ISAC usually assume that the maximum sensing range should be limited by the cyclic prefix (CP) length since inter-symbol interference (ISI) and inter-carrier interference (ICI) should be avoided. However, in this paper, we provide rigorous analysis to reveal that the random data embedded in OFDM-ISAC signal can actually act as a free ``mask" for ISI, which makes ISI/ICI random and hence greatly attenuated after radar signal processing. The derived signal-to-interference-plus-noise ratio (SINR) in the range profile demonstrates that the maximum sensing range of OFDM-ISAC can greatly exceed the ISI-free distance that is limited by the CP length, which is validated by simulation results. To further mitigate power degradation for long-range targets, a novel sliding window sensing method is proposed, which iteratively detects and cancels short-range targets before shifting the detection window. The shifted detection window can effectively compensate the power degradation due to insufficient CP length for long-range targets. Such results provide valuable guidance for the CP length design in OFDM-ISAC systems.

eess.SP↗

arXiv2025

Wireless Communication with Flexible Reflector: Joint Placement and Rotation Optimization for Coverage Enhancement

Passive metal reflectors for communication enhancement have appealing advantages such as ultra low cost, zero energy expenditure, maintenance-free operation, long life span, and full compatibility with legacy wireless systems. To unleash the full potential of passive reflectors for wireless communications, this paper proposes a new passive reflector architecture, termed flexible reflector (FR), for enabling the flexible adjustment of beamforming direction via the FR placement and rotation optimization. We consider the multi-FR aided area coverage enhancement and aim to maximize the minimum expected receive power over all locations within the target coverage area, by jointly optimizing the placement positions and rotation angles of multiple FRs. To gain useful insights, the special case of movable reflector (MR) with fixed rotation is first studied to maximize the expected receive power at a target location, where the optimal single-MR placement positions for electrically large and small reflectors are derived in closed-form, respectively. It is shown that the reflector should be placed at the specular reflection point for electrically large reflector. While for area coverage enhancement, the optimal placement is obtained for the single-MR case and a sequential placement algorithm is proposed for the multi-MR case. Moreover, for the general case of FR, joint placement and rotation design is considered for the single-/multi-FR aided coverage enhancement, respectively. Numerical results are presented which demonstrate significant performance gains of FRs over various benchmark schemes under different practical setups in terms of receive power enhancement.

cs.IT↗

arXiv2025

A Tutorial on Movable Antennas for Wireless Networks

Movable antenna (MA) has been recognized as a promising technology to enhance the performance of wireless communication and sensing by enabling antenna movement. Such a significant paradigm shift from conventional fixed antennas (FAs) to MAs offers tremendous new opportunities towards realizing more versatile, adaptive and efficient next-generation wireless networks such as 6G. In this paper, we provide a comprehensive tutorial on the fundamentals and advancements in the area of MA-empowered wireless networks. First, we overview the historical development and contemporary applications of MA technologies. Next, to characterize the continuous variation in wireless channels with respect to antenna position and/or orientation, we present new field-response channel models tailored for MAs, which are applicable to narrowband and wideband systems as well as far-field and near-field propagation conditions. Subsequently, we review the state-of-the-art architectures for implementing MAs and discuss their practical constraints. A general optimization framework is then formulated to fully exploit the spatial degrees of freedom (DoFs) in antenna movement for performance enhancement in wireless systems. In particular, we delve into two major design issues for MA systems. First, we address the intricate antenna movement optimization problem for various communication and/or sensing systems to maximize the performance gains achievable by MAs. Second, we deal with the challenging channel acquisition issue in MA systems for reconstructing the channel mapping between arbitrary antenna positions inside the transmitter and receiver regions. Moreover, we show existing prototypes developed for MA-aided communication/sensing and the experimental results based on them. Finally, the extension of MA design to other wireless systems and its synergy with other emerging wireless technologies are discussed.

cs.IT↗

arXiv2025

Integrated Localization and Communication with Sparse MIMO: Will Virtual Array Technology also Benefit Wireless Communication?

For the 6G wireless networks, achieving high-performance integrated localization and communication (ILAC) is critical to unlock the full potential of wireless networks. To simultaneously enhance localization and communication performance cost-effectively, this paper proposes sparse multiple-input multiple-output (MIMO) based ILAC with nested and co-prime sparse arrays deployed at the base station. Sparse MIMO relaxes the traditional half-wavelength antenna spacing constraint to enlarge the antenna aperture, thus enhancing localization degrees of freedom and providing finer spatial resolution. However, it also leads to undesired grating lobes, which may cause severe inter-user interference for communication and angular ambiguity for localization. While the latter issue can be effectively addressed by the virtual array technology, by forming sum or difference co-arrays via signal (conjugate) correlation among array elements, it is unclear whether the similar virtual array technology also benefits wireless communications for ILAC systems. In this paper, we first reveal that the answer to the above question is negative, by showing that forming virtual arrays for wireless communication will cause destruction of phase information, degradation of signal-to-noise ratio and aggravation of multi-user interference. Therefore, we propose the hybrid processing for sparse MIMO based ILAC, i.e., physical array based communication while virtual array based localization. To this end, we characterize the beam pattern of sparse arrays by three metrics, demonstrating that despite of the introduction of grating lobes, sparse arrays can also bring benefits to communications thanks to its narrower main lobe beam width than the conventional compact arrays. Extensive simulation results are presented to demonstrate the performance gains of sparse MIMO based ILAC over that based on the conventional compact MIMO.

eess.SP↗

arXiv2025

Prototyping and Experimental Results for ISAC-based Channel Knowledge Map

Channel knowledge map (CKM) is a novel approach for achieving environment-aware communication and sensing. This paper presents an integrated sensing and communication (ISAC)-based CKM prototype system, demonstrating the mutualistic relationship between ISAC and CKM. The system consists of an ISAC base station (BS), a user equipment (UE), and a server. By using a shared orthogonal frequency division multiplexing (OFDM) waveform over the millimeter wave (mmWave) band, the ISAC BS is able to communicate with the UE while simultaneously sensing the environment and acquiring the UE's location. The prototype showcases the complete process of the construction and application of the ISAC-based CKM. For CKM construction phase, the BS stores the UE's channel feedback information in a database indexed by the UE's location, including beam indices and channel gain. For CKM application phase, the BS looks up the best beam index from the CKM based on the UE's location to achieve training-free mmWave beam alignment. The experimental results show that ISAC can be used to construct or update CKM while communicating with UEs, and the pre-learned CKM can assist ISAC for training-free beam alignment.

eess.SP↗

arXiv2025

Machine learning for modelling unstructured grid data in computational physics: a review

Unstructured grid data are essential for modelling complex geometries and dynamics in computational physics. Yet, their inherent irregularity presents significant challenges for conventional machine learning (ML) techniques. This paper provides a comprehensive review of advanced ML methodologies designed to handle unstructured grid data in high-dimensional dynamical systems. Key approaches discussed include graph neural networks, transformer models with spatial attention mechanisms, interpolation-integrated ML methods, and meshless techniques such as physics-informed neural networks. These methodologies have proven effective across diverse fields, including fluid dynamics and environmental simulations. This review is intended as a guidebook for computational scientists seeking to apply ML approaches to unstructured grid data in their domains, as well as for ML researchers looking to address challenges in computational physics. It places special focus on how ML methods can overcome the inherent limitations of traditional numerical techniques and, conversely, how insights from computational physics can inform ML development. To support benchmarking, this review also provides a summary of open-access datasets of unstructured grid data in computational physics. Finally, emerging directions such as generative models with unstructured data, reinforcement learning for mesh generation, and hybrid physics-data-driven paradigms are discussed to inspire future advancements in this evolving field.

cs.LG↗

arXiv2024

An Overview of Cellular ISAC for Low-Altitude UAV: New Opportunities and Challenges

Low-altitude unmanned aerial vehicles (UAVs) are expected to play an important role in future wireless networks, either as aerial base stations (BSs) or aerial users connected to the cellular network. In addition, integrated sensing and communication (ISAC) has been identified as one of the six usage scenarios for the forthcoming sixth-generation (6G) mobile networks, aimed at improving network functionalities and realizing situational awareness of the physical world. While most existing research efforts focus on terrestrial two-dimensional (2D) communication and sensing, UAV as an aerial platform offers a new degree of freedom for designing three-dimensional (3D) air-ground (AG) ISAC networks. In this article, we provide an overview of cellular-connected UAV ISAC, by elaborating the UAV's roles as a target to be sensed and as an aerial anchor to provide sensing functionality, respectively. In particular, we pay attention to the network coverage issue and topics specific to UAV networking, emphasizing the new opportunities as well as unique challenges to be addressed.

cs.IT↗

arXiv2024

Achieving Full-Bandwidth Sensing Performance with Partial Bandwidth Allocation for ISAC

This letter studies an uplink integrated sensing and communication (ISAC) system using discrete Fourier transform spread orthogonal frequency division multiplexing (DFT-s-OFDM) transmission. We try to answer the following fundamental question: With only a fractional bandwidth allocated to the user with sensing task, can the same delay resolution and unambiguous range be achieved as if all bandwidth were allocated to it? We affirmatively answer the question by proposing a novel two-stage delay estimation (TSDE) method that exploits the following facts: without increasing the allocated bandwidth, higher delay resolution can be achieved via distributed subcarrier allocation compared to its collocated counterpart, while there is a trade-off between delay resolution and unambiguous range by varying the decimation factor of subcarriers. Therefore, the key idea of the proposed TSDE method is to first perform coarse delay estimation with collocated subcarriers to achieve a large unambiguous range, and then use distributed subcarriers with optimized decimation factor to enhance delay resolution while avoiding delay ambiguity. Our analysis shows that the proposed TSDE method can achieve the full-bandwidth delay resolution and unambiguous range, by using only at most half of the full bandwidth, provided that the channel delay spread is less than half of the unambiguous range. Numerical results show the superiority of the proposed method over the conventional method with collocated subcarriers.

cs.IT↗

arXiv2024

Generative CKM Construction using Partially Observed Data with Diffusion Model

Channel knowledge map (CKM) is a promising technique that enables environment-aware wireless networks by utilizing location-specific channel prior information to improve communication and sensing performance. A fundamental problem for CKM construction is how to utilize partially observed channel knowledge data to reconstruct a complete CKM for all possible locations of interest. This problem resembles the long-standing ill-posed inverse problem, which tries to infer from a set of limited observations the cause factors that produced them. By utilizing the recent advances of solving inverse problems with generative artificial intelligence (AI), in this paper, we propose generative CKM construction method using partially observed data by solving inverse problems with diffusion models. Simulation results show that the proposed method significantly improves the performance of CKM construction compared with benchmarking schemes.

eess.SP↗

arXiv2024

FFT-Enhanced Low-Complexity Near-Field Super-Resolution Sensing

In this letter, a fast Fourier transform (FFT)-enhanced low-complexity super-resolution sensing algorithm for near-field source localization with both angle and range estimation is proposed. Most traditional near-field source localization algorithms suffer from excessive computational complexity or incompatibility with existing array architectures. To address such issues, this letter proposes a novel near-field sensing algorithm that combines coarse and fine granularity of spectrum peak search. Specifically, a spectral pattern in the angle domain is first constructed using FFT to identify potential angles where sources are present. Afterwards, a 1D beamforming is performed in the distance domain to obtain potential distance regions. Finally, a refined 2D multiple signal classification (MUSIC) is conducted within each narrowed angle-distance region to estimate the precise location of the sources. Numerical results demonstrate that the proposed algorithm can significantly reduce the computational complexity of 2D spectrum peak searches and achieve target localization with high-resolution.

eess.SP↗

arXiv2024

Generating CKM Using Others' Data: Cross-AP CKM Inference with Deep Learning

Channel knowledge map (CKM) is a promising paradigm shift towards environment-aware communication and sensing by providing location-specific prior channel knowledge before real-time communication. Although CKM is particularly appealing for dense networks such as cell-free networks, it remains a challenge to efficiently generate CKMs in dense networks. For a dense network with CKMs of existing access points (APs), it will be useful to efficiently generate CKMs of potentially new APs with only AP location information. The generation of inferred CKMs across APs can help dense networks achieve convenient initial CKM generation, environment-aware AP deployment, and cost-effective CKM updates. Considering that different APs in the same region share the same physical environment, there exists a natural correlation between the channel knowledge of different APs. Therefore, by mining the implicit correlation between location-specific channel knowledge, cross-AP CKM inference can be realized using data from other APs. This paper proposes a cross-AP inference method to generate CKMs of potentially new APs with deep learning. The location of the target AP is fed into the UNet model in combination with the channel knowledge of other existing APs, and supervised learning is performed based on the channel knowledge of the target AP. Based on the trained UNet and the channel knowledge of the existing APs, the CKM inference of the potentially new AP can be generated across APs. The generation results of the inferred CKM validate the feasibility and effectiveness of cross-AP CKM inference with other APs' channel knowledge.

eess.SP↗

arXiv2024

Deep Learning-Based CKM Construction with Image Super-Resolution

Channel knowledge map (CKM) is a novel technique for achieving environment awareness, and thereby improving the communication and sensing performance for wireless systems. A fundamental problem associated with CKM is how to construct a complete CKM that provides channel knowledge for a large number of locations based solely on sparse data measurements. This problem bears similarities to the super-resolution (SR) problem in image processing. In this letter, we propose an effective deep learning-based CKM construction method that leverages the image SR network known as SRResNet. Unlike most existing studies, our approach does not require any additional input beyond the sparsely measured data. In addition to the conventional path loss map construction, our approach can also be applied to construct channel angle maps (CAMs), thanks to the use of a new dataset called CKMImageNet. The numerical results demonstrate that our method outperforms interpolation-based methods such as nearest neighbour and bicubic interpolation, as well as the SRGAN method in CKM construction. Furthermore, only 1/16 of the locations need to be measured in order to achieve a root mean square error (RMSE) of 1.1 dB in path loss.

eess.SP↗

arXiv2024

Double-Side Delay Alignment Modulation for Multi-User Millimeter Wave and TeraHertz Communications

Delay alignment modulation (DAM) is an innovative broadband modulation technique well suited for millimeter wave (mmWave) and terahertz (THz) massive multiple-input multiple-output (MIMO) communication systems. Leveraging the high spatial resolution and sparsity of multi-path channels, DAM mitigates inter-symbol interference (ISI) effectively, by aligning all multi-path components through a combination of delay pre/post-compensation and path-based beamforming. As such, ISI is eliminated while preserving multi-path power gains. In this paper, we explore multi-user double-side DAM with both delay pre-compensation at the transmitter and post-compensation at the receiver, contrasting with prior one-side DAM that primarily focuses on delay pre-compensation only. Firstly, we reveal the constraint for the introduced delays and the delay pre/post-compensation vectors tailored for multi-user double-side DAM, given a specific number of delay pre/post-compensations. Furthermore, we show that as long as the number of base station (BS)/user equipment (UE) antennas is sufficiently large, single-side DAM, where delay compensation is only performed at the BS/UE, is preferred than double-side DAM since the former results in less ISI to be spatially eliminated. Next, we propose two low-complexity path-based beamforming strategies based on the eigen-beamforming transmission and ISI-zero forcing (ZF) principles, respectively, based on which the achievable sum rates are studied. Simulation results verify that with sufficiently large BS/UE antennas, single-side DAM is sufficient. Furthermore, compared to the benchmark scheme of orthogonal frequency division multiplexing (OFDM), multi-user BS-side DAM achieves higher spectral efficiency and/or lower peak-to-average power ratio (PAPR).

eess.SP↗

arXiv2024

Group Movable Antenna With Flexible Sparsity: Joint Array Position and Sparsity Optimization

Movable antenna (MA) is a promising technology to exploit the spatial variation of wireless channel for performance enhancement, by dynamically varying the antenna position within a certain region. However, for multi-antenna communication systems, moving each antenna independently not only requires prohibitive complexity to find the optimal antenna positions, but also incurs sophisticated movement control in practice. To address this issue, this letter proposes a new MA architecture termed group MA (GMA), enabling the group movement of all elements collectively in a continuous manner, and simultaneously achieving flexible array architecture by antenna selection (AS). In this letter, we focus on the uniform sparse array based GMA, where equally spaced antenna elements are selected to achieve desired array sparsity. The array position and sparsity level are jointly optimized to maximize the sum rate of the multi-user communication system. Numerical results verify the necessity to optimize the position and sparsity of GMA, and considerable performance gain is achieved as compared to the conventional fixed-position antenna (FPA).

cs.IT↗

arXiv2024

CKMImageNet: A Comprehensive Dataset to Enable Channel Knowledge Map Construction via Computer Vision

Environment-aware communication and sensing is one of the promising paradigm shifts towards 6G, which fully leverages prior information of the local wireless environment to optimize network performance. One of the key enablers for environment-aware communication and sensing is channel knowledge map (CKM), which provides location-specific channel knowledge that is crucial for channel state information (CSI) acquisition. To support the efficient construction of CKM, large-scale location-specific channel data is essential. However, most existing channel datasets do not have the location information nor visual representations of channel data, making them inadequate for exploring the intrinsic relationship between the channel knowledge and the local environment, nor for applying advanced artificial intelligence (AI) algorithms such as computer vision (CV) for CKM construction. To address such issues, in this paper, a large-scale dataset named CKMImageNet is established, which can provide both location-tagged numerical channel data and visual images, providing a holistic view of the channel and environment. Built using commercial ray tracing software, CKMImageNet captures electromagnetic wave propagation in different scenarios, revealing the relationships between location, environment and channel knowledge. By integrating detailed channel data and the corresponding image, CKMImageNet not only supports the verification of various communication and sensing algorithms, but also enables CKM construction with CV algorithms.

cs.IT↗

arXiv2024

Delay Alignment Modulation with Hybrid Analog/Digital Beamforming for Millimeter Wave and Terahertz Communications

For millimeter wave (mmWave) or Terahertz (THz) communications, by leveraging the high spatial resolution offered by large antenna arrays and the multi-path sparsity of mmWave/THz channels, a novel inter-symbol interference (ISI) mitigation technique called delay alignment modulation (DAM) has been recently proposed. The key ideas of DAM are delay pre-compensation and path-based beamforming. However, existing research on DAM is mainly based on fully digital beamforming, which requires the number of radio frequency (RF) chains to be equal to the number of antennas. This paper proposes the hybrid analog/digital beamforming based DAM, including both fully and partially connected structures. The analog and digital beamforming matrices are designed to achieve performance close to DAM based on fully digital beamforming. While DAM was considered for the path-based channel model with integer delays in the previous work, this paper extends DAM to a more general tap-based model that accounts for fractional path delays. To further reduce the cost of channel estimation and improve the performance for wireless channels with fractional delays, DAM with codebook-based beam alignment and DAM-orthogonal frequency division multiplexing (DAM-OFDM) with hybrid beamforming are proposed. The effectiveness of the proposed techniques is verified by extensive simulation results.

eess.SP↗

arXiv2024

Convolutional Beamspace Beamforming for Low-Complexity Far-Field and Near-Field MU-MIMO Communications

Inter-user interference (IUI) mitigation has been an essential issue for multi-user multiple-input multiple-output (MU-MIMO) communications. The commonly used linear processing schemes include the maximum-ratio combining (MRC), zero-forcing (ZF) and minimum mean squared error (MMSE) beamforming, which may result in the unfavorable performance or complexity as the antenna number grows. In this paper, we introduce a low-complexity linear beamforming solution for the IUI mitigation by using the convolutional beamspace (CBS) technique. Specifically, the dimension of channel matrix can be significantly reduced via the CBS preprocessing, thanks to its beamspace and spatial filtering effects. However, existing methods of the spatial filter design mainly benefit from the Vandermonde structure of channel matrix, which only holds for the far-field scenario with the uniform plane wave (UPW) model. As the antenna size increases, this characteristic may vanish in the near-field region of the array, where the uniform spherical wave (USW) propagation becomes dominant. To gain useful insights, we first investigate the beamforming design and performance analysis of the CBS-based beamforming based on the UPW model. Our results unveil that the proposed CBS-based MMSE beamforming is able to achieve a near-optimal performance but demands remarkably lower complexity than classical ZF and MMSE schemes. Furthermore, our analysis is also extended to the near-field case. To this end, a novel optimization-based CBS approach is proposed for preserving spatial filtering effects, thus rendering the compatibility of the CBS-based beamforming. Finally, numerical results are provided to demonstrate the effectiveness of our proposed CBS-based beamforming method.

eess.SP↗