arXiv subjects

Yong Zeng

Publications and source records attributed to Yong Zeng.

At least 91 records · Page 5Linked to original sources

arXiv2024

Single-BS Simultaneous Environment Sensing and UE Localization without LoS Path by Exploiting Near-Field Scatterers

As the mobile communication network evolves over the past few decades, localizing user equipment (UE) has become an important network service. While localization in line-of-sight (LoS) scenarios has reached a level of maturity, it is known that in far-field scenarios without a LoS path nor any prior information about the scatterers, accurately localizing the UE is impossible. In this letter, we show that this becomes possible if there are scatterers in the near-field region of the base station (BS) antenna arrays. Specifically, by exploiting the additional distance sensing capability of extremely large-scale antenna arrays (XL-arrays) provided by near-field effects, we propose a novel method that simultaneously performs environment sensing and non-line-of-sight (NLoS) UE localization using one single BS. In the proposed method, the BS leverages the near-field characteristics of XL-arrays to directly estimate the locations of the near-field scatterers with array signal processing, which then serves as virtual anchors for UE localization. Then, the propagation delay for each path is estimated and the position of the UE is obtained based on the positions of scatterers and the path delays. Simulation results demonstrate that the proposed method achieves superior accuracy and robustness with similar complexity compared with benchmark methods.

eess.SP↗

arXiv2024

Movable Antenna for Wireless Communications:Prototyping and Experimental Results

Movable antenna (MA), which can flexibly change the position of antenna in three-dimensional (3D) continuous space, is an emerging technology for achieving full spatial performance gains. In this paper, a prototype of MA communication system with ultra-accurate movement control is presented to verify the performance gain of MA in practical environments. The prototype utilizes the feedback control to ensure that each power measurement is performed after the MA moves to a designated position. The system operates at 3.5 GHz or 27.5 GHz, where the MA moves along a one-dimensional horizontal line with a step size of 0.01λ and in a two-dimensional square region with a step size of 0.05λ, respectively, with λ denoting the signal wavelength. The scenario with mixed line-of-sight (LoS) and non-LoS (NLoS) links is considered. Extensive experimental results are obtained with the designed prototype and compared with the simulation results, which validate the great potential of MA technology in improving wireless communication performance. For example, the maximum variation of measured power reaches over 40 dB and 23 dB at 3.5 GHz and 27.5 GHz, respectively, thanks to the flexible antenna movement. In addition, experimental results indicate that the power gain of MA system relies on the estimated path state information (PSI), including the number of paths, their delays, elevation and azimuth angles of arrival (AoAs), as well as the power ratio of each path.

cs.IT↗

arXiv2024

Channel Knowledge Map for Cellular-Connected UAV via Binary Bayesian Filtering

Channel knowledge map (CKM) is a promising technology to enable environment-aware wireless communications and sensing. Link state map (LSM) is one particular type of CKM that aims to learn the location-specific line-of-sight (LoS) link probability between the transmitter and the receiver at all possible locations, which provides the prior information to enhance the communication quality of dynamic networks. This paper investigates the LSM construction for cellularconnected unmanned aerial vehicles (UAVs) by utilizing both the expert empirical mathematical model and the measurement data. Specifically, we first model the LSM as a binary spatial random field and its initial distribution is obtained by the empirical model. Then we propose an effective binary Bayesian filter to sequentially update the LSM by using the channel measurement. To efficiently update the LSM, we establish the spatial correlation models of LoS probability on the location pairs in both the distance and angular domains, which are adopted in the Bayesian filter for updating the probabilities at locations without measurements. Simulation results demonstrate the effectiveness of the proposed algorithm for LSM construction, which significantly outperforms the benchmark scheme, especially when the measurements are sparse.

cs.IT↗

arXiv2024

Enhancing Spatial Multiplexing and Interference Suppression for Near- and Far-Field Communications with Sparse MIMO

Multiple-input multiple-output has been a key technology for wireless systems for decades. For typical MIMO communication systems, antenna array elements are usually separated by half of the carrier wavelength, thus termed as conventional MIMO. In this paper, we investigate the performance of multi-user MIMO communication, with sparse arrays at both the transmitter and receiver side, i.e., the array elements are separated by more than half wavelength. Given the same number of array elements, the performance of sparse MIMO is compared with conventional MIMO. On one hand, sparse MIMO has a larger aperture, which can achieve narrower main lobe beams that make it easier to resolve densely located users. Besides, increased array aperture also enlarges the near-field communication region, which can enhance the spatial multiplexing gain, thanks to the spherical wavefront property in the near-field region. On the other hand, element spacing larger than half wavelength leads to undesired grating lobes, which, if left unattended, may cause severe inter-user interference. To gain further insights, we first study the spatial multiplexing gain of the basic single-user sparse MIMO communication system, where a closed-form expression of the near-field effective degree of freedom is derived. The result shows that the EDoF increases with the array sparsity for sparse MIMO before reaching its upper bound, which equals to the minimum value between the transmit and receive antenna numbers. Furthermore, the scaling law for the achievable data rate with varying array sparsity is analyzed and an array sparsity-selection strategy is proposed. We then consider the more general multi-user sparse MIMO communication system. It is shown that sparse MIMO is less likely to experience severe IUI than conventional MIMO.

eess.SP↗

arXiv2024

Parkinson's Disease Detection from Resting State EEG using Multi-Head Graph Structure Learning with Gradient Weighted Graph Attention Explanations

Parkinson's disease (PD) is a debilitating neurodegenerative disease that has severe impacts on an individual's quality of life. Compared with structural and functional MRI-based biomarkers for the disease, electroencephalography (EEG) can provide more accessible alternatives for clinical insights. While deep learning (DL) techniques have provided excellent outcomes, many techniques fail to model spatial information and dynamic brain connectivity, and face challenges in robust feature learning, limited data sizes, and poor explainability. To address these issues, we proposed a novel graph neural network (GNN) technique for explainable PD detection using resting state EEG. Specifically, we employ structured global convolutions with contrastive learning to better model complex features with limited data, a novel multi-head graph structure learner to capture the non-Euclidean structure of EEG data, and a head-wise gradient-weighted graph attention explainer to offer neural connectivity insights. We developed and evaluated our method using the UC San Diego Parkinson's disease EEG dataset, and achieved 69.40% detection accuracy in subject-wise leave-one-out cross-validation while generating intuitive explanations for the learnt graph topology.

cs.LG↗

arXiv2024

Efficient Channel Estimation for Millimeter Wave and Terahertz Systems Enabled by Integrated Super-resolution Sensing and Communication

Integrated super-resolution sensing and communication (ISSAC) has emerged as a promising technology to achieve extremely high precision sensing for those key parameters, such as the angles of the sensing targets. In this paper, we propose an efficient channel estimation scheme enabled by ISSAC for millimeter wave (mmWave) and TeraHertz (THz) systems with a hybrid analog/digital beamforming architecture, where both the pilot overhead and the cost of radio frequency (RF) chains are significantly reduced. The key idea is to exploit the fact that subspace-based super-resolution algorithms such as multiple signal classification (MUSIC) can estimate channel parameters accurately without requiring dedicate a priori known pilots. In particular, the proposed method consists of two stages. First, the angles of the multi-path channel components are estimated in a pilot-free manner during the transmission of data symbols. Second, the multi-path channel coefficients are estimated with very few pilots. Compared to conventional channel estimation schemes that rely solely on channel training, our approach requires the estimation of much fewer parameters in the second stage. Furthermore, with channel multi-path angles obtained, the beamforming gain can be achieved when pilots are sent to estimate the channel path gains. To comprehensively investigate the performance of the proposed scheme, we consider both the basic line-of-sight (LoS) channels and more general multi-path channels. We compare the performance of the minimum mean square error (MMSE) of channel estimation and the resulting beamforming gains of our proposed scheme with the traditional scheme that rely exclusively on channel training. It is demonstrated that our proposed method significantly outperforms the benchmarking scheme. Simulation results are presented to validate our theoretical findings.

eess.SP↗

arXiv2024

Integrated Sensing and Communication with Nested Array: Beam Pattern and Performance Analysis

Towards the upcoming 6G wireless networks, integrated sensing and communication (ISAC) has been identified as one of the typical usage scenarios. To further enhance the performance of ISAC, increasing the number of antennas as well as array aperture is one of the effective approaches. However, simply increasing the number of antennas will increase the cost of radio frequency chains and power consumption. To address this issue, in this paper, we consider an uplink ISAC system with nested array deployed at the base station. Nested array is a classic sparse array architecture that is able to enlarge the array aperture without increasing the number of physical antennas. While nested array for wireless sensing has been extensively studied, its potential for ISAC system has not been fully exploited. To fill this gap, in this paper, we provide the beam pattern analysis of nested arrays, and derive the closed-form expressions for the three beam pattern metrics, namely, the main lobe beam width, peak-to-local-minimum ratio, and prominent side lobes height. Extensive simulation results are provided to show that compared with conventional uniform arrays, nested arrays can achieve higher communication performance for densely located users while maintaining its advantage of sensing.

cs.IT↗

arXiv2024

Fixed and Movable Antenna Technology for 6G Integrated Sensing and Communication

By deploying antenna arrays at the transmitter/receiver to provide additional spatial-domain degrees of freedom (DoFs), multi-antenna technology greatly improves the reliability and efficiency of wireless communication. Meanwhile, the application of multi-antenna technology in the radar field has achieved spatial angle resolution and improved sensing DoF, thus significantly enhancing wireless sensing performance. However, wireless communication and radar sensing have undergone independent development over the past few decades. As a result, although multi-antenna technology has dramatically advanced in these two fields separately, it has not been deeply integrated by exploiting their synergy. A new opportunity to fill up this gap arises as the integration of sensing and communication has been identified as one of the typical usage scenarios of the 6G communication network. Motivated by the above, this article aims to explore the multi-antenna technology for 6G ISAC, with the focus on its future development trends such as continuous expansion of antenna array scale, more diverse array architectures, and more flexible antenna designs. First, we introduce several new and promising antenna architectures, including the centralized antenna architectures based on traditional compact arrays or emerging sparse arrays, the distributed antenna architectures exemplified by the cell-free massive MIMO, and the movable/fluid antennas with flexible positions and/or orientations in a given 3D space. Next, for each antenna architecture mentioned above, we present the corresponding far-field/near-field channel models and analyze the communication and sensing performance. Finally, we summarize the characteristics of different antenna architectures and look forward to new ideas for solving the difficulties in acquiring CSI caused by the continuous expansion of antenna array scale and flexible antenna designs.

cs.AR↗

arXiv2024

Orthogonal Time Frequency Space with Delay-Doppler Alignment Modulation

Delay-Doppler alignment modulation (DDAM) is a novel technique to mitigate time-frequency doubly selective channels by leveraging the high spatial resolution offered by large antenna arrays and multi-path sparsity of millimeter wave (mmWave) and TeraHertz (THz) channels. By introducing per-path delay and Doppler compensations, followed by path-based beamforming, it is possible to reshape the channel features with significantly reduced channel delay and Doppler spreads. This offers new degrees-of-freedom for waveform designs such as orthogonal time frequency space (OTFS), since the reshaped channel can significantly relax the constraints on OTFS parameter selection and reduce the complexity of signal detection at the receiver. Therefore, in this paper, by combing DDAM with OTFS, we propose a novel technique termed DDAM-OTFS. Two implementation schemes are introduced for DDAM-OTFS, namely path-based alignment and bin-based alignment. Simulation results are provided to demonstrate the superior performance of the proposed DDAM-OTFS in terms of spectral efficiency (SE) and peak-to-average power ratio (PAPR) compared to the conventional OTFS.

eess.SP↗

arXiv2024

Multi-Functional Beamforming Design for Integrated Sensing, Communication, and Computation

Integrated sensing and communication (ISAC) systems may face a heavy computation burden since the sensory data needs to be further processed. This paper studies a novel system that integrates sensing, communication, and computation, aiming to provide services for different objectives efficiently. This system consists of a multi-antenna multi-functional base station (BS), an edge server, a target, and multiple singleantenna communication users. The BS needs to allocate the available resources to efficiently provide sensing, communication, and computation services. Due to the heavy service burden and limited power budget, the BS can partially offload the tasks to the nearby edge server instead of computing them locally. We consider the estimation of the target response matrix, a general problem in radar sensing, and utilize Cramer-Rao bound (CRB) as the corresponding performance metric. To tackle the non-convex optimization problem, we propose both semidefinite relaxation (SDR)-based alternating optimization and SDR-based successive convex approximation (SCA) algorithms to minimize the CRB of radar sensing while meeting the requirement of communication users and the need for task computing. Furthermore, we demonstrate that the optimal rankone solutions of both the alternating and SCA algorithms can be directly obtained via the solver or further constructed even when dealing with multiple functionalities. Simulation results show that the proposed algorithms can provide higher target estimation performance than state-of-the-art benchmarks while satisfying the communication and computation constraints.

eess.SP↗

arXiv2024

Sparse MIMO for ISAC: New Opportunities and Challenges

Multiple-input multiple-output (MIMO) has been a key technology of wireless communications for decades. A typical MIMO system employs antenna arrays with the inter-antenna spacing being half of the signal wavelength, which we term as compact MIMO. Looking forward towards the future sixth-generation (6G) mobile communication networks, MIMO system will achieve even finer spatial resolution to not only enhance the spectral efficiency of wireless communications, but also enable more accurate wireless sensing. To this end, by removing the restriction of half-wavelength antenna spacing, sparse MIMO has been proposed as a new architecture that is able to significantly enlarge the array aperture as compared to conventional compact MIMO with the same number of array elements. In addition, sparse MIMO leads to a new form of virtual MIMO systems for sensing with their virtual apertures considerably larger than physical apertures. As sparse MIMO is expected to be a viable technology for 6G, we provide in this article a comprehensive overview of it, especially focusing on its appealing advantages for integrated sensing and communication (ISAC) towards 6G. Specifically, assorted sparse MIMO architectures are first introduced, followed by their new benefits as well as challenges. We then discuss the main design issues of sparse MIMO, including beam pattern synthesis, signal processing, grating lobe suppression, beam codebook design, and array geometry optimization. Last, we provide numerical results to evaluate the performance of sparse MIMO for ISAC and point out promising directions for future research.

cs.IT↗

arXiv2024

Rethinking Waveform for 6G: Harnessing Delay-Doppler Alignment Modulation

Waveform design has served as a cornerstone for each generation of mobile communication systems. The future sixth-generation (6G) mobile communication networks are expected to employ larger-scale antenna arrays and exploit higher-frequency bands for further boosting data transmission rate and providing ubiquitous wireless sensing. This brings new opportunities and challenges for 6G waveform design. In this article, by leveraging the super spatial resolution of large antenna arrays and the multi-path spatial sparsity of highfrequency wireless channels, we introduce a new approach for waveform design based on the recently proposed delay-Doppler alignment modulation (DDAM). In particular, DDAM makes a paradigm shift of waveform design from the conventional manner of tolerating channel delay and Doppler spreads to actively manipulating them. First, we review the fundamental constraints and performance limitations of orthogonal frequency division multiplexing (OFDM) and introduce new opportunities for 6G waveform design. Next, the motivations and basic principles of DDAM are presented, followed by its various extensions to different wireless system setups. Finally, the main design considerations for DDAM are discussed and the new opportunities for future research are highlighted.

eess.SP↗

arXiv2024

Performance Analysis of Hybrid Cellular and Cell-free MIMO Network

Cell-free wireless communication is envisioned as one of the most promising network architectures, which can achieve stable and uniform communication performance while improving the system energy and spectrum efficiency. The deployment of cell-free networks is envisioned to be a longterm evolutionary process, in which cell-free access points (APs) will be gradually introduced into the communication network and collaborate with the existing cellular base stations (BSs). To further explore the performance limits of hybrid cellular and cell-free networks, this paper develops a hybrid network model based on stochastic geometric toolkits, which reveals the coupling of the signal and interference from both the cellular and cell-free networks. Specifically, the conjugate beamforming is applied in hybrid cellular and cell-free networks, which enables user equipment (UE) to benefit from both cellular BSs and cell-free APs. The aggregate signal received from the hybrid network is approximated via moment matching, and coverage probability is characterized by deriving the Laplace transform of the interference. The analysis of signal strength and coverage probability is verified by extensive simulations.

eess.SP↗

arXiv2024

Environment-aware UAV Communications: CKM Construction and Predictive Beamforming

Predictive millimeter-wave (mmWave) beamforming is a promising technique to enable low-latency and high-rate ground-air communications for cellular-connected unmanned aerial vehicles (UAVs). However, the high vulnerability of mmWave to blockages poses practical challenges to the implementation of such a technology. In this paper, we tackle the challenges by proposing a channel knowledge map (CKM)-assisted predictive beamforming approach based on the echoed joint communication and sensing signal, whereby the line-of-sight (LoS) link identification is performed via hypothesis testing using prior information provided by CKM. Depending on the identification result, extended Kalman filtering (EKF) is adopted to reliably track the target UAV. Furthermore, if the non-line-of-sight (NLoS) state is identified, the target UAV will be immediately connected to a candidate base station (BS), namely a handover will be triggered to alleviate the communication outage. The simulation results show that the proposed method can significantly enhance the UAV tracking and mmWave communication performance compared to the benchmarking schemes without using CKM or LoS identification.

eess.SP↗

arXiv2024

Little Pilot is Needed for Channel Estimation with Integrated Super-Resolution Sensing and Communication

Integrated super-resolution sensing and communication (ISSAC) is a promising technology to achieve extremely high sensing performance for critical parameters, such as the angles of the wireless channels. In this paper, we propose an ISSAC-based channel estimation method, which requires little or even no pilot, yet still achieves accurate channel state information (CSI) estimation. The key idea is to exploit the fact that subspace-based super-resolution algorithms such as multiple signal classification (MUSIC) do not require a priori known pilots for accurate parameter estimation. Therefore, in the proposed method, the angles of the multi-path channel components are first estimated in a pilot-free manner while communication data symbols are sent. After that, the multi-path channel coefficients are estimated, where very little pilots are needed. The reasons are two folds. First, compared to the conventional channel estimation methods purely relying on channel training, much fewer parameters need to be estimated once the multi-path angles are accurately estimated. Besides, with angles obtained, the beamforming gain is also enjoyed when pilots are sent to estimate the channel path gains. To rigorously study the performance of the proposed method, we first consider the basic line-of-sight (LoS) channel. By analyzing the minimum mean square error (MMSE) of channel estimation and the resulting beamforming gains, we show that our proposed method significantly outperforms the conventional methods purely based on channel training. We then extend the study to the more general multipath channels. Simulation results are provided to demonstrate our theoretical results.

eess.SP↗

arXiv2024

A Tutorial on Near-Field XL-MIMO Communications Towards 6G

Extremely large-scale multiple-input multiple-output (XL-MIMO) is a promising technology for the sixth-generation (6G) mobile communication networks. By significantly boosting the antenna number or size to at least an order of magnitude beyond current massive MIMO systems, XL-MIMO is expected to unprecedentedly enhance the spectral efficiency and spatial resolution for wireless communication. The evolution from massive MIMO to XL-MIMO is not simply an increase in the array size, but faces new design challenges, in terms of near-field channel modelling, performance analysis, channel estimation, and practical implementation. In this article, we give a comprehensive tutorial overview on near-field XL-MIMO communications, aiming to provide useful guidance for tackling the above challenges. First, the basic near-field modelling for XL-MIMO is established, by considering the new characteristics of non-uniform spherical wave (NUSW) and spatial non-stationarity. Next, based on the near-field modelling, the performance analysis of XL-MIMO is presented, including the near-field signal-to-noise ratio (SNR) scaling laws, beam focusing pattern, achievable rate, and degrees-of-freedom (DoF). Furthermore, various XL-MIMO design issues such as near-field beam codebook, beam training, channel estimation, and delay alignment modulation (DAM) transmission are elaborated. Finally, we point out promising directions to inspire future research on near-field XL-MIMO communications.

cs.IT↗

arXiv2024

Fractional Delay Alignment Modulation for Spatially Sparse Wireless Communications

Delay alignment modulation (DAM) is a novel transmission technique for wireless systems with high spatial resolution by leveraging delay compensation and path-based beamforming, to mitigate the inter-symbol interference (ISI) without resorting to complex channel equalization or multi-carrier transmission. However, most existing studies on DAM consider a simplified scenario by assuming that the channel multi-path delays are integer multiples of the signal sampling interval. This paper investigates DAM for the more general and practical scenarios with fractional multi-path delays. We first analyze the impact of fractional multi-path delays on the existing DAM design, termed integer DAM (iDAM), which can only achieve delay compensations that are integer multiples of the sampling interval. It is revealed that the existence of fractional multi-path delays renders iDAM no longer possible to achieve perfect delay alignment. To address this issue, we propose a more generic DAM design called fractional DAM (fDAM), which achieves fractional delay pre-compensation via upsampling and fractional delay filtering. By leveraging the Farrow filter structure, the proposed approach can eliminate ISI without real-time computation of filter coefficients, as typically required in traditional channel equalization techniques. Simulation results demonstrate that the proposed fDAM outperforms the existing iDAM and orthogonal frequency division multiplexing (OFDM) in terms of symbol error rate (SER) and spectral efficiency, while maintaining a comparable peak-to-average power ratio (PAPR) as iDAM, which is considerably lower than OFDM.

eess.SP↗

arXiv2024

Prototyping and Experimental Results for Environment-Aware Millimeter Wave Beam Alignment via Channel Knowledge Map

Channel knowledge map (CKM), which aims to directly reflect the intrinsic channel properties of the local wireless environment, is a novel technique for achieving environmentaware communication. In this paper, to alleviate the large training overhead in millimeter wave (mmWave) beam alignment, an environment-aware and training-free beam alignment prototype is established based on a typical CKM, termed beam index map (BIM). To this end, a general CKM construction method is first presented, and an indoor BIM is constructed offline to learn the candidate transmit and receive beam index pairs for each grid in the experimental area. Furthermore, based on the location information of the receiver (or the dynamic obstacles) from the ultra-wide band (UWB) positioning system, the established BIM is used to achieve training-free beam alignment by directly providing the beam indexes for the transmitter and receiver. Three typical scenarios are considered in the experiment, including quasi-static environment with line-of-sight (LoS) link, quasistatic environment without LoS link and dynamic environment. Besides, the receiver orientation measured from the gyroscope is also used to help CKM predict more accurate beam indexes. The experiment results show that compared with the benchmark location-based beam alignment strategy, the CKM-based beam alignment strategy can achieve much higher received power, which is close to that achieved by exhaustive beam search, but with significantly reduced training overhead.

eess.SY↗