arXiv subjects

Yong Zeng

Publications and source records attributed to Yong Zeng.

At least 145 records · Page 8Linked to original sources

arXiv2022

Near-Field Spatial Correlation for Extremely Large-Scale Array Communications

Extremely large-scale array (XL-array) communications correspond to systems whose antenna sizes are so large that the scatterers and/or users may no longer be located in the far-field region. By discarding the conventional far-field uniform plane wave (UPW) assumption, this letter studies the near-field spatial correlation of XL-array communications, by taking into account the more generic non-uniform spherical wave (NUSW) characteristics. It is revealed that different from the far-field channel spatial correlation which only depends on the power angular spectrum (PAS), the near-field spatial correlation depends on the scattered power distribution not just characterized by their arriving angles, but also by the scatterers' distances, which is termed as power location spectrum (PLS). A novel integral expression is derived for the near-field spatial correlation in terms of the scatterers' location distribution, which includes the far-field spatial correlation as a special case. The result shows that different from the far-field case, the near-field spatial correlation no longer exhibits spatial stationarity in general, since the correlation coefficient for each pair of antennas depends on their specific positions, rather than their relative distance only. To gain further insights, we propose a generalized one-ring model for scatterer distribution, by allowing the ring center to be flexibly located rather than coinciding with the array center as in the conventional one-ring model. Numerical results are provided to show the necessity of the near-field spatial correlation modelling for XL-array communications.

cs.IT↗

arXiv2022

Delay Alignment Modulation: Enabling Equalization-Free Single-Carrier Communication

This paper proposes a novel broadband transmission technology, termed delay alignment modulation (DAM), which enables the low-complexity equalization-free single-carrier communication, yet without suffering from inter-symbol interference (ISI). The key idea of DAM is to deliberately introduce appropriate delays for information-bearing symbols at the transmitter side, so that after propagating over the time-dispersive channel, all multi-path signal components will arrive at the receiver simultaneously and constructively. We first show that by applying DAM for the basic multiple-input single-output (MISO) communication system, an ISI-free additive white Gaussian noise (AWGN) system can be obtained with the simple zero-forcing (ZF) beamforming. Furthermore, the more general DAM scheme is studied with the ISI-maximal-ratio transmission (MRT) and the ISI-minimum mean-square error (MMSE) beamforming. Simulation results are provided to show that when the channel is sparse and/or the antenna dimension is large, DAM not only resolves the notorious practical issues suffered by orthogonal frequency-division multiplexing (OFDM) such as high peak-to-average-power ratio (PAPR), severe out-of-band (OOB) emission, and vulnerability to carrier frequency offset (CFO), with low complexity, but also achieves higher spectral efficiency due to the saving of guard interval overhead.

cs.IT↗

arXiv2021

Environment-Aware Beam Selection for IRS-Aided Communication with Channel Knowledge Map

Intelligent reflecting surface (IRS)-aided communication is a promising technology for beyond 5G (B5G) systems, to reconfigure the radio environment proactively. However, IRS-aided communication in practice requires efficient channel estimation or passive beam training, whose overhead and complexity increase drastically with the number of reflecting elements/beam directions. To tackle this challenge, we propose in this paper a novel environment-aware joint active and passive beam selection scheme for IRS-aided wireless communication, based on the new concept of channel knowledge map (CKM). Specifically, by utilizing both the location information of the user equipment (UE), which is readily available in contemporary wireless systems with ever-increasing accuracy, and the environment information offered by CKM, the proposed scheme achieves efficient beam selection with either no real-time training required (training-free beam selection) or only moderate training overhead (light-training beam selection). Numerical results based on practical channels obtained using commercial ray tracing software are presented, which demonstrate the superior performance of the proposed scheme over various benchmark schemes.

cs.IT↗

arXiv2021

Channel Knowledge Map for Environment-Aware Communications: EM Algorithm for Map Construction

Channel knowledge map (CKM) is an emerging technique to enable environment-aware wireless communications, in which databases with location-specific channel knowledge are used to facilitate or even obviate real-time channel state information acquisition. One fundamental problem for CKM-enabled communication is how to efficiently construct the CKM based on finite measurement data points at limited user locations. Towards this end, this paper proposes a novel map construction method based on the \emph{expectation maximization} (EM) algorithm, by utilizing the available measurement data, jointly with the expert knowledge of well-established statistic channel models. The key idea is to partition the available data points into different groups, where each group shares the same modelling parameter values to be determined. We show that determining the modelling parameter values can be formulated as a maximum likelihood estimation problem with latent variables, which is then efficiently solved by the classic EM algorithm. Compared to the pure data-driven methods such as the nearest neighbor based interpolation, the proposed method is more efficient since only a small number of modelling parameters need to be determined and stored. Furthermore, the proposed method is extended for constructing a specific type of CKM, namely, the channel gain map (CGM), where closed-form expressions are derived for the E-step and M-step of the EM algorithm. Numerical results are provided to show the effectiveness of the proposed map construction method as compared to the benchmark curve fitting method with one single model.

cs.IT↗

arXiv2021

Waveform Design and Performance Analysis for Full-Duplex Integrated Sensing and Communication

Integrated sensing and communication (ISAC) is a promising technology to fully utilize the precious spectrum and hardware in wireless systems, which has attracted significant attentions recently. This paper studies ISAC for the important and challenging monostatic setup, where one single ISAC node wishes to simultaneously sense a radar target while communicating with a communication receiver. Different from most existing schemes that rely on either radar-centric half-duplex (HD) pulsed transmission with information embedding that suffers from extremely low communication rate, or communication-centric waveform that suffers from degraded sensing performance, we propose a novel full-duplex (FD) ISAC scheme that utilizes the waiting time of conventional pulsed radars to transmit dedicated communication signals. Compared to radar-centric pulsed waveform with information embedding, the proposed design can drastically increase the communication rate, and also mitigate the sensing eclipsing and near-target blind range issues, as long as the self-interference (SI) is effectively suppressed. On the other hand, compared to communication-centric ISAC waveform, the proposed design has better auto-correlation property as it preserves the classic radar waveform for sensing. Performance analysis is developed by taking into account the residual SI, in terms of the probability of detection and ambiguity function for sensing, as well as the spectrum efficiency for communication. Numerical results are provided to show the significant performance gain of our proposed design over benchmark schemes.

eess.SP↗

arXiv2021

Acoustic Geometric-Phase Meta-Array

Metasurfaces based on geometric phase acquired from the conversion of the optical spin states provide a robust control over the wavefront of light, and have been widely employed for construction of various types of functional metasurface devices. However, this powerful approach cannot be readily transferred to the manipulation of acoustic waves because acoustic waves do not possess the spin degree of freedom. Here, we propose the concept of acoustic geometric-phase meta-array by leveraging the conversion of orbital angular momentum of acoustic waves, where well-defined geometric-phases can be attained through versatile topological charge conversion processes. This work extends the concept of geometric-phase metasurface from optics to acoustics, and provides a new route for acoustic wave control.

physics.app-ph↗

arXiv2021

Multi-User Communication with Extremely Large-Scale MIMO

Extremely large-scale multiple-input multiple-output (XL-MIMO) communication aims to further boost the antenna size significantly than current massive MIMO systems, for which conventional far-field assumption with uniform plane wave (UPW) model may become invalid. This paper studies the modelling and performance analysis for multi-user XL-MIMO communication. With the spherical wavefront phase modelling, and also by taking into account the variations of signal amplitude and projected aperture across array elements, the performance of the three typical beamforming schemes are analyzed, namely the maximal-ratio combining (MRC), zero-forcing (ZF), and minimum mean-square error (MMSE) beamforming. For the special case of two-users, we analytically show that the signal-to-interference-plus-noise ratio (SINR) of all the three beamforming schemes increases as the channels' correlation coefficient decreases. Furthermore, compared to existing UPW model where inter-user interference (IUI) can only be suppressed in angular domain, XL-MIMO enables a new degree-of-freedom (DoF) for IUI suppression by distance separation, even for users along the same direction. Simulation results are provided to validate the modelling and performance analysis of multi-user XL-MIMO communications.

cs.IT↗

arXiv2021

A Comprehensive Overview on 5G-and-Beyond Networks with UAVs: From Communications to Sensing and Intelligence

Due to the advancements in cellular technologies and the dense deployment of cellular infrastructure, integrating unmanned aerial vehicles (UAVs) into the fifth-generation (5G) and beyond cellular networks is a promising solution to achieve safe UAV operation as well as enabling diversified applications with mission-specific payload data delivery. In particular, 5G networks need to support three typical usage scenarios, namely, enhanced mobile broadband (eMBB), ultra-reliable low-latency communications (URLLC), and massive machine-type communications (mMTC). On the one hand, UAVs can be leveraged as cost-effective aerial platforms to provide ground users with enhanced communication services by exploiting their high cruising altitude and controllable maneuverability in three-dimensional (3D) space. On the other hand, providing such communication services simultaneously for both UAV and ground users poses new challenges due to the need for ubiquitous 3D signal coverage as well as the strong air-ground network interference. Besides the requirement of high-performance wireless communications, the ability to support effective and efficient sensing as well as network intelligence is also essential for 5G-and-beyond 3D heterogeneous wireless networks with coexisting aerial and ground users. In this paper, we provide a comprehensive overview of the latest research efforts on integrating UAVs into cellular networks, with an emphasis on how to exploit advanced techniques (e.g., intelligent reflecting surface, short packet transmission, energy harvesting, joint communication and radar sensing, and edge intelligence) to meet the diversified service requirements of next-generation wireless systems. Moreover, we highlight important directions for further investigation in future work.

cs.IT↗

arXiv2021

Wireless Communication with Extremely Large-Scale Intelligent Reflecting Surface

Intelligent reflecting surface (IRS) is a promising technology for wireless communications, thanks to its potential capability to engineer the radio environment. However, in practice, such an envisaged benefit is attainable only when the passive IRS is of a sufficiently large size, for which the conventional uniform plane wave (UPW)-based channel model may become inaccurate. In this paper, we pursue a new channel modelling and performance analysis for wireless communications with extremely large-scale IRS (XL-IRS). By taking into account the variations in signal's amplitude and projected aperture across different reflecting elements, we derive both lower- and upper-bounds of the received signal-to-noise ratio (SNR) for the general uniform planar array (UPA)-based XL-IRS. Our results reveal that, instead of scaling quadratically with the increased number of reflecting elements M as in the conventional UPW model, the SNR under the more practically applicable non-UPW model increases with M only with a diminishing return and gets saturated eventually. To gain more insights, we further study the special case of uniform linear array (ULA)-based XL-IRS, for which a closed-form SNR expression in terms of the IRS size and transmitter/receiver location is derived. This result shows that the SNR mainly depends on the two geometric angles formed by the transmitter/receiver locations with the IRS, as well as the boundary points of the IRS. Numerical results validate our analysis and demonstrate the importance of proper channel modelling for wireless communications aided by XL-IRS.

cs.IT↗

arXiv2021

Cell-Free Symbiotic Radio: Channel Estimation Method and Achievable Rate Analysis

Cell-free massive MIMO and symbiotic radio are promising beyond 5G (B5G) networking architecture and transmission technology, respectively. This paper studies cell-free symbiotic radio systems, where a number of distributed access points (APs) cooperatively send primary information to a receiver, and simultaneously support the backscattering communication of the secondary backscatter device (BD). An efficient two-phase uplink-training based channel estimation method is proposed to estimate the direct-link channel and cascaded backscatter channel, and the achievable primary and secondary communication rates taking into account the channel estimation errors are derived. Furthermore, to achieve a flexible trade-off between the primary and secondary communication rates, we propose a low-complexity weighted-maximal-ratio transmission (weighted-MRT) beamforming scheme, which only requires local processing at each AP without having to exchange the estimated channel state information. Simulation results are provided to show the impact of the channel training lengths on the performance of the cell-free symbiotic radio systems.

cs.IT↗

arXiv2021

SNR Scaling Laws for Radio Sensing with Extremely Large-Scale MIMO

Mobile communication networks were designed to mainly support ubiquitous wireless communications, yet they are expected to also achieve radio sensing capabilities in the near future. Most prior studies on radar sensing focus on distant targets, which usually rely on far-field assumption with uniform plane wave (UPW) models. However, with ever-increasing antenna size, together with the growing need to also sense nearby targets, the far-field assumption may become invalid. This paper studies radar sensing with extremely large-scale (XL) antenna arrays, where a generic model that takes into account both spherical wavefront and amplitude variations across array elements is developed. Furthermore, new closed-form expressions of the sensing signal-to-noise ratios (SNRs) are derived for both XL-MIMO radar and XL-phased-array radar modes. Our results reveal that different from the conventional UPW model where the SNR scales linearly and unboundedly with N for MIMO radar and with MN for phased-array radar, with M and N being the transmit and receive antenna numbers, respectively, more practical SNR scaling laws are obtained. For XL-phased-array radar with optimal power allocation, the SNR increases with M and N with diminishing returns, governed by new parameters called the transmit and receive angular spans. On the other hand, for XL-MIMO radar, while the same SNR scaling as XL-phased-array radar is obeyed for N, the SNR first increases and then decreases with M.

eess.SP↗

arXiv2021

Enabling Full Mutualism for Symbiotic Radio with Massive Backscatter Devices

Symbiotic radio is a promising technology to achieve spectrum- and energy-efficient wireless communications, where the secondary backscatter device (BD) leverages not only the spectrum but also the power of the primary signals for its own information transmission. In return, the primary communication link can be enhanced by the additional multipaths created by the BD. This is known as the mutualism relationship of symbiotic radio. However, as the backscattering link is much weaker than the direct link due to double attenuations, the improvement of the primary link brought by one single BD is extremely limited. To address this issue and enable full mutualism of symbiotic radio, in this paper, we study symbiotic radio with massive number of BDs. For symbiotic radio multiple access channel (MAC) with successive interference cancellation (SIC), we first derive the achievable rate of both the primary and secondary communications, based on which a receive beamforming optimization problem is formulated and solved. Furthermore, considering the asymptotic regime of massive number of BDs, closed-form expressions are derived for the primary and the secondary communication rates, both of which are shown to be increasing functions of the number of BDs. This thus demonstrates that the mutualism relationship of symbiotic radio can be fully exploited with massive BD access.

eess.SP↗

arXiv2021

Communicating with Extremely Large-Scale Array/Surface: Unified Modelling and Performance Analysis

Wireless communications with extremely large-scale array (XL-array) correspond to systems whose antenna sizes are so large that conventional modelling assumptions, such as uniform plane wave (UPW) impingement, are longer valid. This paper studies the mathematical modelling and performance analysis of XL-array communications. By deviating from the conventional modelling approach that treats the array elements as sizeless points, we explicitly model their physical area/aperture, which enables a unified modelling for the classical discrete antenna arrays and the emerging continuous surfaces. As such, a generic array/surface model that accurately takes into account the variations of signal phase, amplitude and projected aperture across array elements is proposed. Based on the proposed model, a closed-form expression of the resulting SNR with the optimal single-user MRC/MRT beamforming is derived. The expression reveals that instead of scaling linearly with the antenna number M as in conventional UPW modelling, the SNR with the more generic model increases with M with diminishing return, which is governed by the collective properties of the array, such as the array occupation ratio and the physical sizes of the array along each dimension, while irrespective of the properties of the individual array element. Additionally, we have derived an alternative insightful expression for the optimal SNR in terms of the vertical and horizontal angular spans. Furthermore, we also show that our derived results include the far-field UPW modelling as a special case. One important finding during the study of far-field approximation is the necessity to introduce a new distance criterion to complement the classical Rayleigh distance, termed uniform-power distance (UPD), which concerns the signal amplitude/power variations across array elements, instead of phase variations as for Rayleigh distance.

cs.IT↗

arXiv2021

Enabling Smart Reflection in Integrated Air-Ground Wireless Network: IRS Meets UAV

Intelligent reflecting surface (IRS) and unmanned aerial vehicle (UAV) have emerged as two promising technologies to boost the performance of wireless communication networks, by proactively altering the wireless communication channels via smart signal reflection and maneuver control, respectively. However, they face different limitations in practice, which restrain their future applications. In this article, we propose new methods to jointly apply IRS and UAV in integrated air-ground wireless networks by exploiting their complementary advantages. Specifically, terrestrial IRS is used to enhance the UAV-ground communication performance, while UAV-mounted IRS is employed to assist in the terrestrial communication. We present their promising application scenarios, new communication design issues as well as potential solutions. In particular, we show that it is practically beneficial to deploy both the terrestrial and aerial IRSs in future wireless networks to reap the benefits of smart reflections in three-dimensional (3D) space.

cs.IT↗

arXiv2021

Environment-Aware and Training-Free Beam Alignment for mmWave Massive MIMO via Channel Knowledge Map

Millimeter wave (mmWave) massive multiple-input multiple-output (MIMO) communication system is expected to achieve enormous transmission rate, provided that the transmit and receive beams are properly aligned with the MIMO channel. However, existing beam alignment techniques rely on either channel estimation or beam sweeping, which incur prohibitively high training overhead, especially for future wireless systems with further increased antenna dimensions and more stringent requirement on cost-effective hardware architectures. In this paper, we propose a new beam alignment technique, which is environment-aware and training-free, by utilizing the emerging concept of channel knowledge map (CKM), together with the user location information that is readily available in contemporary wireless systems. CKM is a site-specific database, tagged with the transmitter/receiver locations, which contains useful channel information to facilitate or even obviate real-time channel state information (CSI) acquistion. Two instances of CKM are proposed for beam alignment in mmWave massive MIMO systems, namely channel path map (CPM) and beam index map (BIM). It is shown that compared with existing training-based beam alignment schemes, the proposed CKM-enabled environment-aware beam alignment is able to drastically improve the effective communication rate, even with moderate user location errors, thanks to its significant saving of the prohibitive training overhead.

eess.SP↗

arXiv2020

Communication and Localization with Extremely Large Lens Antenna Array

Achieving high-rate communication with accurate localization and wireless environment sensing has emerged as an important trend of beyond-fifth and sixth generation cellular systems. Extension of the antenna array to an extremely large scale is a potential technology for achieving such goals. However, the super massive operating antennas significantly increases the computational complexity of the system. Motivated by the inherent advantages of lens antenna arrays in reducing system complexity, we consider communication and localization problems with an \uline{ex}tremely large \uline{lens} antenna array, which we call "ExLens". Since radiative near-field property emerges in the setting, we derive the closed-form array response of the lens antenna array with spherical wave, which includes the array response obtained on the basis of uniform plane wave as a special case. Our derivation result reveals a window effect for energy focusing property of ExLens, which indicates that ExLens has great potential in position sensing and multi-user communication. We also propose an effective method for location and channel parameters estimation, which is able to achieve the localization performance close to the Cramér-Rao lower bound. Finally, we examine the multi-user communication performance of ExLens that serves coexisting near-field and far-field users. Numerical results demonstrate the effectiveness of the proposed channel estimation method and show that ExLens with a minimum mean square error receiver achieves significant spectral efficiency gains and complexity-and-cost reductions compared with a uniform linear array.

cs.IT↗

arXiv2020

Aerial Intelligent Reflecting Surface: Joint Placement and Passive Beamforming Design with 3D Beam Flattening

This paper proposes a new three-dimensional (3D) wireless passive relaying system enabled by aerial IRS (AIRS). Compared to the conventional terrestrial IRS, AIRS enjoys more deployment flexibility as well as wider-range signal reflection, thanks to its high altitude and thus more likelihood of establishing line-of-sight (LoS) links with ground source/destination nodes. Specifically, we aim to maximize the worst-case signal-to-noise ratio (SNR) over all locations in a target area by jointly optimizing the transmit beamforming for the source node and the placement as well as 3D passive beamforming for the AIRS. The formulated problem is non-convex and thus difficult to solve. To gain useful insights, we first consider the special case of maximizing the SNR at a given target location, for which the optimal solution is obtained in closed-form. The result shows that the optimal horizontal AIRS placement only depends on the ratio between the source-destination distance and the AIRS altitude. Then for the general case of AIRS-enabled area coverage, we propose an efficient solution by decoupling the AIRS passive beamforming design to maximize the worst-case array gain, from its placement optimization by balancing the resulting angular span and the cascaded channel path loss. Our proposed solution is based on a novel 3D beam broadening and flattening technique, where the passive array of the AIRS is divided into sub-arrays of appropriate size, and their phase shifts are designed to form a flattened beam pattern with adjustable beamwidth catering to the size of the coverage area. Both the uniform linear array (ULA)-based and uniform planar array (UPA)-based AIRSs are considered in our design, which enable two-dimensional (2D) and 3D passive beamforming, respectively. Numerical results show that the proposed designs achieve significant performance gains over the benchmark schemes.

eess.SP↗

arXiv2020

How Does Performance Scale with Antenna Number for Extremely Large-Scale MIMO?

Extremely large-scale multiple-input multiple-output (XL-MIMO) communications correspond to systems whose antenna size is so large that conventional assumptions, such as uniform plane wave (UPW) impingement, are no longer valid. This paper studies the channel modelling and performance analysis of XL-MIMO communication based on the generic spherical wavefront propagation model. First, for the single-user uplink/downlink communication with the optimal maximum ratio combining/transmission (MRC/MRT), we rigorously derive a new closed-form expression for the resulting signal-to-noise ratio (SNR), which includes the conventional SNR expression based on UPW assumption as a special case. Our result shows that instead of scaling linearly with the base station (BS) antenna number $M$, the SNR with the more generic spherical wavefront model increases with $M$ with diminishing return, governed by a new parameter called angular span. One important finding from our derivation is the necessity to introduce a new distance criterion, termed critical distance, to complement the classical Rayleigh distance for separating the near- and far-field propagation regions. While Rayleigh distance is based on the phase difference across array elements and hence depends on the electrical size of the antenna, the critical distance cares about the amplitude/power difference and only depends on its physical size. We then extend the study to the multi-user XL-MIMO communication system, for which we demonstrate that inter-user interference (IUI) can be mitigated not just by angle separation, but also by distance separation along the same direction. This offers one new degree of freedom (DoF) for interference suppression with XL-MIMO.

cs.IT↗