arXiv subjects

Yong-Wei Zhang

Publications and source records attributed to Yong-Wei Zhang.

At least 55 records · Page 3Linked to original sources

arXiv2016

Highly Itinerant Atomic Vacancies in Phosphorene

Using detailed first-principles calculations, we investigate the hopping rate of vacancies in phosphorene, an emerging elemental 2D material besides graphene. Our work predicts that a direct observation of these mono-vacancies (MVs), showing a highly mobile and anisotropic motion, is possible only at low temperatures around 70 K or below where the thermal activity is greatly suppressed. At room temperature, the motion of a MV is sixteen orders faster than that in graphene, because of the low diffusion barrier of 0.3 eV. Built-in strain associated with the vacancies extends far along the zigzag direction while attenuating rapidly along the armchair direction. We reveal new features of the motion of di-vacancies (DVs) in phosphorene via multiple dissociation-recombination processes of vacancies owing to a small energy cost of ~ 1.05 eV for the splitting of a DV into two MVs. Furthermore, we find that uniaxial tensile strain along the zigzag direction can promote the motion of MVs, while the tensile strain along the armchair direction has the opposite effect. These itinerant features of vacancies, rooted in the unique puckering structure facilitating bond reorganization, enable phosphorene to be a bright new opportunity to broaden the knowledge of the evolution of vacancies, and a proper control of the exceedingly active and anisotropic movement of the vacancies should be critical for applications based on phosphorene.

cond-mat.mtrl-sci↗

arXiv2016

Quantum thermal transport in stanene

By way of the non-equilibrium Green's function simulations and analytical expressions, the quantum thermal conductance of stanene is studied. We find that, due to the existence of Dirac fermion in stanene, the ratio of electron thermal conductance and electric conductance becomes a chemical-potential-dependent quantity, violating the Wiedemann-Franz law. This finding is applicable to any two-dimensional (2D) materials that possess massless Dirac fermions. In strong contrast to the negligible electronic contribution in graphene, surprisingly, the electrons and phonons in stanene carry a comparable heat current. The unusual behaviours in stanene widen our knowledge of quantum thermal transport in 2D materials.

cond-mat.mtrl-sci↗

arXiv2016

From Brittle to Ductile: A Structure Dependent Ductility of Diamond Nanothread

As a potential building block for the next generation of devices or multifunctional materials that are spreading almost every technology sector, one-dimensional (1D) carbon nanomaterial has received intensive research interests. Recently, a new ultra-thin diamond nanothread (DNT) has joined this palette, which is a 1D structure with poly-benzene sections connected by Stone-Wales (SW) transformation defects. Using large-scale molecular dynamics simulations, we found that this sp3 bonded DNT can transit from a brittle to a ductile characteristic by varying the length of the poly-benzene sections, suggesting that DNT possesses entirely different mechanical responses than other 1D carbon allotropies. Analogously, the SW defects behave like a grain boundary that interrupts the consistency of the poly-benzene sections. For a DNT with a fixed length, the yield strength fluctuates in the vicinity of a certain value and is independent of the "grain size". On the other hand, both yield strength and yield strain show a clear dependence on the total length of DNT, which is due to the fact that the failure of the DNT is dominated by the SW defects. Its highly tunable ductility together with its ultra-light density and high Young's modulus makes diamond nanothread ideal for creation of extremely strong three-dimensional nano-architectures.

cond-mat.mtrl-sci↗

arXiv2016

Diamond nanothread as a new reinforcement for nanocomposites

This work explores the application of a new one-dimensional carbon nanomaterial, the diamond nanothread (DNT), as a reinforcement for nanocomposites. Owing to the existence of Stone-Wales transformation defects, the DNT intrinsically possesses irregular surfaces, which is expected to enhance the non-covalent interfacial load transfer. Through a series of in silico pull-out studies of the DNT in polyethylene (PE) matrix, we found that the load transfer between DNT and PE matrix is dominated by the non-covalent interactions, in particular the van der Waals interactions. Although the hydrogenated surface of the DNT reduces the strength of the van der Waals interactions at the interface, the irregular surface of the DNT can compensate for the weak bonds. These factors lead to an interfacial shear strength of the DNT/PE interface comparable with that of the carbon nanotube (CNT)/PE interface. Our results show that the DNT/PE interfacial shear strength remains high even as the number of Stone-Wales transformation defects decreases. It can be enhanced further by increasing the PE density or introduction of functional groups to the DNT, both of which greatly increase the non-covalent interactions.

cond-mat.mtrl-sci↗

arXiv2015

Exciton-dominated Dielectric Function of Atomically Thin MoS2 Films

We systematically measure the dielectric function of atomically thin MoS2 films with different layer numbers and demonstrate that excitonic effects play a dominant role in the dielectric function when the films are less than 5-7 layers thick. The dielectric function shows an anomalous dependence on the layer number. It decreases with the layer number increasing when the films are less than 5-7 layers thick but turns to increase with the layer number for thicker films. We show that this is because the excitonic effect is very strong in the thin MoS2 films and its contribution to the dielectric function may dominate over the contribution of the band structure. We also extract the value of layer-dependent exciton binding energy and Bohr radius in the films by fitting the experimental results with an intuitive model. The dominance of excitonic effects is in stark contrast with what reported at conventional materials whose dielectric functions are usually dictated by band structures. The knowledge of the dielectric function may enable capabilities to engineer the light-matter interactions of atomically thin MoS2 films for the development of novel photonic devices, such as metamaterials, waveguides, light absorbers, and light emitters.

cond-mat.mtrl-sci↗

arXiv2015

Realization of Room-Temperature Phonon-limited Carrier Transport in Monolayer MoS2 by Dielectric and Carrier Screening

We show that by combining high-k dielectric substrate and high density of charge carriers, Coulomb impurity can be effectively screened, leading to an unprecedented room-temperature mobility of ~150cm2/Vs in monolayer MoS2. The high sample quality enables us to quantitatively extract the mobility components limited by Coulomb impurities, intrinsic and surface optical phonons, and study their scaling with temperature, carrier density and dielectric constant. The excellent agreement between our theoretical analysis and experimental data demonstrates unambiguously that room-temperature phonon-limited transport is achieved in monolayer MoS2, which is a necessary factor for electronic device applications.

cond-mat.mtrl-sci↗

arXiv2015

High-Performance Monolayer WS2 Field-effect Transistors on High-k Dielectrics

The combination of high-quality Al2O3 dielectric and thiol chemistry passivation can effectively reduce the density of interface traps and Coulomb impurities of WS2, leading to a significant improvement of the mobility and a transition of the charge transport from the insulating to the metallic regime. A record high mobility of 83 cm2/Vs (337 cm2/Vs) is reached at room temperature (low temperature) for monolayer WS2. A theoretical model for electron transport is also developed.

cond-mat.mtrl-sci↗

arXiv2015

The Electronic Properties of Phosphorene/Graphene and Phosphorene/Hexagonal Boron Nitride Heterostructures

Vertical integration of two-dimensional materials has recently emerged as an exciting method for the design of novel electronic and optoelectronic devices. Using density functional theory, we investigatethe structural and electronic properties of two heterostruc-tures, graphene/phosphorene (G/BP) and hexagonal boron nitride/phosphorene (BN/BP). We found that the interlayer distance, binding energy, and charge transfer in G/BP and BN/BP are similar. Interlayer noncovalentbonding is predicted due to the weak coupling between the pz orbital of BP and the π orbital of graphene and BN. A small amount of electron transfer from graphene and BN, scaling with the vertical strain, renders BP slightly n-doped for both heterostructures. Several attractive characteristics of BP, including direct band gap and linear dichroism, are preserved. However, a large redistribution of electrostatic potential across the interface is observed, which may significantly renormalize the carrier dynamics and affect the excitonic behavior of BP. Our work suggests that graphene and BN can be used not only as an effective capping layer to protect BP from its structural and chemical degradation while still maintain its major electronic characteristics, but also as an active layer to tune the carrier dynamics and optical properties of BP.

cond-mat.mtrl-sci↗

arXiv2015

Giant Phononic Anisotropy and Unusual Anharmonicity of Phosphorene: Interlayer Coupling and Strain Engineering

Phosphorene, an emerging elemental two-dimensional (2D) direct band gap semiconductor with fascinating structural and electronic properties distinctively different from other 2D materials such as graphene and MoS2, is promising for novel nanoelectronic and optoelectronic applications. Phonons, as one of the most important collective excitations, are at the heart for the device performance, as their interactions with electrons and photons govern the carrier mobility and light-emitting efficiency of the material. Here, through a detailed first-principles study, it is demonstrated that monolayer phosphorene exhibits a giant phononic anisotropy, and remarkably, this anisotropy is squarely opposite to its electronic counterpart and can be tuned effectively by strain engineering. By sampling the whole Brillouin zone for the mono-layer phosphorene, several "hidden" directions are found, along which small-momentum phonons are "frozen" with strain and possess the smallest degree of anharmonicity. Unexpectedly, these "hidden" directions are intrinsically different from those usually studied armchair and zigzag directions. Light is also shed on the anisotropy of interlayer coupling of few-layer phosphorene by examining the rigid-layer vibrations. These highly anisotropic and strain-tunable characteristics of phosphorene offer new possibilities for its applications in thermal management, thermoelectronics, nanoelectronics and phononics.

cond-mat.mtrl-sci↗

arXiv2015

Energetics, Charge Transfer and Magnetism of Small Molecules Physisorbed on Phosphorene

First-principles calculations are performed to investigate the interaction of physisorbed small molecules, including CO, H2, H2O, NH3, NO, NO2, and O2, with phosphorene, and their energetics, charge transfer, and magnetic moment are evaluated on the basis of dispersion corrected density functional theory. Our calculations reveal that CO, H2, H2O and NH3 molecules act as a weak donor, whereas O2 and NO2 act as a strong acceptor. While NO molecule donates electrons to graphene, it receives electrons from phosphorene. Among all the investigated molecules, NO2 has the strongest interaction through hybridizing its frontier orbitals with the 3p orbital of phosphorene. The nontrivial and distinct charge transfer occurring between phosphorene and these physisorbed molecules not only renders phosphorene promising for application as a gas sensor, but also provides an effective route to modulating the polarity and density of carriers in phosphorene. In addition, the binding energy of H2 on phosphorene is found to be 0.13 eV/H2, indicating that phosphorene is suitable for both stable room-temperature hydrogen storage and its subsequent facile release.

cond-mat.mtrl-sci↗

arXiv2014

Layer-dependent Band Alignment and Work Function of Few-Layer Phosphorene

Using first-principles calculations, we study the electronic properties of few-layer phosphorene focusing on layer-dependent behavior of band gap, work function and band alignment and carrier effective mass. It is found that few-layer phosphorene shows a robust direct band gap character, and its band gap decreases with the number of layers following a power law. The work function decreases rapidly from monolayer (5.16 eV) to trilayer (4.56 eV), and then slowly upon further increasing the layer number. Compared to monolayer phosphorene, there is a drastic decrease of hole effective mass along the ridge (zigzag) direction for bilayer phosphorene, indicating a strong interlayer coupling and screening effect. Our study suggests that 1). Few-layer phosphorene with a layer-dependent band gap and a robust direct band gap character is promising for efficient solar energy harvest. 2). Few-layer phosphorene outperforms monolayer counterpart in terms of a lighter carrier effective mass, a higher carrier density and a weaker scattering due to enhanced screening. 3). The layer-dependent band edges and work functions of few-layer phosphorene allow for modification of Schottky barrier with enhanced carrier injection efficiency. It is expected that few-layer phosphorene will present abundant opportunities for a plethora of new electronic applications.

cond-mat.mtrl-sci↗

arXiv2014

Strong Thermal Transport Anisotropy and Strain Modulation in Single-Layer Phosphorene

Using first-principles calculations and non-equilibrium Green's function method, we investigate the ballistic thermal transport in single-layer phosphorene. A significant crystallographic orientation dependence of thermal conductance is observed, with room temperature thermal conductance along zigzag direction being 40 percent higher than that along armchair direction. Furthermore, we find that the thermal conductance anisotropy with the orientation can be tuned by applying strain. In particular, the zigzag-oriented thermal conductance is enhanced when a zigzag-oriented strain is applied but decreases when an armchair-oriented strain is applied; whereas the armchair-oriented thermal conductance always decreases when either a zigzag- or an armchair-oriented strain is applied. The present work suggests that the remarkable thermal transport anisotropy and its strain-modulated effect in single-layer phosphorene may be used for thermal management in phosphorene-based electronics and optoelectronic devices.

cond-mat.mes-hall↗

arXiv2014

A Gapless MoS$_2$ Allotrope Possessing Both Massless Dirac and Heavy Fermions

MoS$_2$, a member of transition metal dichalcogenides (TMDs), recently emerged as one of the fastest growing two-dimensional materials due to its fascinating mechanical, thermal, electronic and optical properties. Unlike graphene which possesses massless Dirac fermions with ultra-high electron mobility, monolayer MoS$_2$ is a direct band gap semiconductor. An interesting question arises: Can monolayer MoS$_2$ also possess massless Dirac fermions with ultra-high electron mobility? Here, using first-principles calculations, we show that a monolayer MoS$_2$ allotrope, which consists of repeated square-octagon rings (abbreviated as so-MoS$_2$ to distinguish from the normal hexagonal lattice, h-MoS$_2$) possesses both massless Dirac fermions and heavy fermions. Distinct from the $p$-orbital Dirac fermions of graphene, the Dirac fermions of so-MoS$_2$ are $d$-electrons and possess Fermi velocity comparable to that of graphene. The Dirac cone structure in so-MoS$_2$ demonstrated here greatly enriches our understanding on the physical properties of TMDs and opens up new possibilities for developing novel electronic/spintronic devices.

cond-mat.mes-hall↗

arXiv2013

Lattice Vibrational Modes and Phonon Thermal Conductivity of Monolayer MoS2

The anharmonic behavior of phonons and intrinsic thermal conductivity associated with the Umklapp scattering in monolayer MoS2 sheet are investigated via first-principles calculations within the framework of density functional perturbation theory. In contrast to the negative Gruneissen parameter occurring in low frequency modes in graphene, positive Gruneissen parameter in the whole Brillouin zone is demonstrated in monolayer MoS2 with much larger Gruneissen parameter for acoustic modes than that for the optical modes, suggesting that monolayer MoS2 sheet possesses a positive coefficient of thermal-expansion. The calculated phonon lifetimes of the infrared active modes are 5.50 and 5.72 ps for E'and A2'' respectively, in good agreement with experimental result obtained by fitting the dielectric oscillators with the infrared reflectivity spectrum. The lifetime of Raman A1' mode (38.36 ps) is about 7 times longer than those of the infrared modes. The dominated phonon mean free path of monolayer MoS2 is less than 20 nm, about 30-fold smaller than that of graphene. Combined with the non-equilibrium Green's function calculations, the room temperature thermal conductivity of monolayer MoS2 is found to be around 23.2 Wm-1K-1, two orders of magnitude lower than that of graphene.

cond-mat.mtrl-sci↗

arXiv2013

Polarity Reversed Robust Carrier Mobility in Monolayer MoS2 Nanoribbons

Using first-principles calculations and deformation potential theory, we investigate the intrinsic carrier mobility (μ) of monolayer MoS2 sheet and nanoribbons. In contrast to the dramatic three orders of magnitude of deterioration of μ in graphene upon forming nanoribbons, the magnitude of μ in armchair MoS2 nanoribbons is comparable to that in monolayer MoS2 sheet, albeit oscillating with width. Surprisingly, a room-temperature transport polarity reversal is observed with μ of hole (h) and electron (e) being 200.52 (h) and 72.16 (e) cm2V-1s-1 in sheet, and 49.72 (h) and 190.89 (e) cm2V-1s-1 in 4 nm-wide nanoribbon. The robust magnitudes of μ and polarity reversal are attributable to the different characteristics of edge states inherent in MoS2 nanoribbons. Our study suggests that width-reduction together with edge engineering provide a promising route for improving the transport properties of MoS2 nanostructures.

cond-mat.mtrl-sci↗

arXiv2013

Constructing Metallic Nanoroad on MoS2 Monolayer via Hydrogenation

Monolayer transition metal dichalcogenides recently emerge as a new family of two-dimensional material potentially suitable for numerous applications in electronic and optoelectronic devices due to the presence of finite band gap. Many proposed applications require efficient transport of charge carriers within these semiconducting monolayers. However, how to construct a stable conducting nanoroad on these atomically thin semiconductors is still a challenge. Here we demonstrate that hydrogenation on the surface of MoS2 monolayer induces a semiconductor-metal transition, and strip-patterned hydrogenation is able to generate a conducting nanoroad. The band-gap closing arises from the formation of in-gap hybridized states mainly consisting of Mo 4d orbitals, as well as the electron donation from hydrogen to the lattice host. Ballistic conductance calculations reveal that such a nanoroad on the MoS2 surface exhibits an integer conductance, indicating small carrier scattering, and thus is ideal for serving as a conducting channel or interconnect without compromising the mechanical and structural integrity of the monolayer.

cond-mat.mtrl-sci↗

arXiv2013

Flaw-driven Failure in Nanostructures

Understanding failure in nanomaterials is critical for the design of reliable structural materials and small-scale devices that have components or microstructural elements at the nanometer length scale. No consensus exists on the effect of flaws on fracture in bulk nanostructured materials or in nanostructures. Proposed theories include nanoscale flaw tolerance and maintaining macroscopic fracture relationships at the nanoscale with virtually no experimental support. We explore fracture mechanisms in nanomaterials via nanomechanical experiments on nanostructures with pre-fabricated surface flaws in combination with molecular dynamics simulations. Nanocrystalline Pt cylinders with diameters of 120 nm with intentionally introduced surface notches were created using a template-assisted electroplating method and tested in uniaxial tension in in-situ SEM. Experiments demonstrate that 8 out of 12 samples failed at the notches and that tensile failure strengths were 1.8 GPa regardless of whether failure occurred at or away from the flaw. These findings suggest that failure location was sensitive to the presence of flaws, while strength was flaw-insensitive. Molecular dynamics simulations support these observations and show that incipient plastic deformation commences via nucleation and motion of dislocations in concert with grain boundary sliding. We postulate that such local plasticity reduces stress concentration ahead of the flaw to levels comparable with the strengths of intrinsic microstructural features like grain boundary triple junctions, a phenomenon unique to nano-scale solids that contain an internal microstructural energy landscape. This mechanism causes failure to occur at the weakest link, be it an internal inhomogeneity or a surface feature with a high local stress.

cond-mat.mtrl-sci↗

arXiv2013

Quasiparticle band structures and optical properties of strained monolayer MoS2 and WS2

The quasiparticle (QP) band structures of both strainless and strained monolayer MoS$_{2}$ are investigated using more accurate many body perturbation \emph{GW} theory and maximally localized Wannier functions (MLWFs) approach. By solving the Bethe-Salpeter equation (BSE) including excitonic effects on top of the partially self-consistent \emph{GW$_{0}$} (sc\emph{GW$_{0}$}) calculation, the predicted optical gap magnitude is in a good agreement with available experimental data. With increasing strain, the exciton binding energy is nearly unchanged, while optical gap is reduced significantly. The sc\emph{GW$_{0}$} and BSE calculations are also performed on monolayer WS$_{2}$, similar characteristics are predicted and WS$_{2}$ possesses the lightest effective mass at the same strain among monolayers Mo(S,Se) and W(S,Se). Our results also show that the electron effective mass decreases as the tensile strain increases, resulting in an enhanced carrier mobility. The present calculation results suggest a viable route to tune the electronic properties of monolayer transition-metal dichalcogenides (TMDs) using strain engineering for potential applications in high performance electronic devices.

cond-mat.mtrl-sci↗