arXiv subjects
Publications and source records attributed to Yoshihiko Takano.
Structural and physical properties of layered chalcogenide superconductors are summarized. In particular, we review the remarkable properties of the Fe-chalcogenide superconductors, FeSe and FeTe-based materials. Furthermore, we introduce the recently-discovered new BiS2-based layered superconductors and discuss its prospects.
We report $^{77}$Se-nuclear magnetic resonance (NMR) results down to sufficiently low temperatures under magnetic fields parallel to both the $ab$-plane and the c-axis in a paramagnetic/superconducting (PM/SC) phase of K$_x$Fe$_{2-y}$Se$_2$. The observation of anisotropy in the orbital part of the Knight shift results in the anisotropy of its spin part increasing on approaching the transition temperature. The anisotropy of the Korringa relation suggests the presence of the weak spin fluctuations with a finite wave vector $\bm{q}$, which induce the magnetic fluctuations along the ab-plane at the Se site. Such fluctuations do not correspond to the stripe $(π,0)$ correlation of the Fe moment observed in many Fe-based superconductors, and are not contradictory to weak $(π,π)$ correlations. The nuclear spin-lattice relaxation rate $1/T_1$ shows a field-independent $T_1T \sim const.$ behavior at low temperatures for $H \parallel ab$, which is attributed to the nonzero density of states at the Fermi level and can be explained by the sign-changing order parameter even for nodeless gaps. The temperature dependence of $1/T_1$ is reproduced well by nodeless models with two isotropic gaps or a single anisotropic gap. The obtained gap magnitude in the isotropic two-gap model is comparable to those obtained in the angle-resolved photoemission spectroscopy experiments.
We report the electrical resistivity measurements under pressure for the recently discovered BiS2-based layered superconductors Bi4O4S3 and La(O,F)BiS2. In Bi4O4S3, the transition temperature Tc decreases monotonically without a distinct change in the metallic behavior in the normal state. In La(O,F)BiS2, on the other hand, Tc initially increases with increasing pressure and then decreases above ? 1 GPa. The semiconducting behavior in the normal state is suppressed markedly and monotonically, whereas the evolution of Tc is nonlinear. The strong suppression of the semiconducting behavior without doping in La(O,F)BiS2 suggests that the Fermi surface is located in the vicinity of some instability. In the present study, we elucidate that the superconductivity in the BiS2 layer favors the Fermi surface at the boundary between the semiconducting and metallic behaviors.
We have successfully synthesized a new BiS2-based superconductor NdOBiS2 with F-doping. This compound is composed of superconducting BiS2 layers and blocking NdO layers, which indicates that the BiS2 layer is the one of the common superconducting layers like the CuO2 layer of cuprates or Fe-As layer of Fe-based superconductors. We can obtain NdO1-xFxBiS2 with bulk superconductivity by a solid-state reaction under ambient pressure. Therefore, NdO1-xFxBiS2 should be the suitable material to elucidate the mechanism of superconductivity in the BiS2-layer.
Exotic superconductivity has often been discovered in materials with a layered (two-dimensional) crystal structure. The low dimensionality can affect the electronic structure and can realize high transition temperatures (Tc) and/or unconventional superconductivity mechanisms. As standard examples, we now have two types of high-Tc superconductors. The first group is the Cu-oxide superconductors whose crystal structure is basically composed of a stacking of spacer (blocking) layers and superconducting CuO2 layers.1-4 The second group is the Fe-based superconductors which also possess a stacking structure of spacer layers and superconducting Fe2An2 (An = P, As, Se, Te) layers.5-13 In both systems, dramatic enhancements of Tc are achieved by optimizing the spacer layer structure, for instance, a variety of composing elements, spacer thickness, and carrier doping levels with respect to the superconducting layers. In this respect, to realize higher-Tc superconductivity, other than Cu-oxide and Fe-based superconductors, the discovery of a new prototype of layered superconductors needs to be achieved. Here we show superconductivity in a new bismuth-oxysulfide layered compound Bi4O4S3. Crystal structure analysis indicates that this superconductor has a layered structure composed of stacking of Bi4O4(SO4)1-x and Bi2S4 layers; the parent compound (x = 0) is Bi6O8S5. Band calculation suggests that Bi4O4S3 (x = 0.5) is metallic while Bi6O8S5 (x = 0) is a band insulator with Bi3+. Furthermore, the Fermi level for Bi4O4S3 is just on the peak position of the partial density of states of the Bi 6p orbital within the BiS2 layer. The BiS2 layer is a basic structure which provides another universality class for layered superconducting family, and this opens up a new field in the physics and chemistry of low-dimensional superconductors.
We report successful fabrication of multi- and mono-core FeSe wires with high transport critical current density Jc using a simple in-situ Fe-diffusion process based on the powder-in-tube (Fe-diffusion PIT) method. The seven-core wire showed transport Jc of as high as 1027 A/cm2 at 4.2 K. The superconducting transition temperature Tczero was observed at 10.5 K in the wire-samples, which is about 2 K higher than that of bulk FeSe. The Fe-diffusion PIT method is suitable for fabricating multi-core wires of the binary FeSe superconductors with superior properties.
We have successfully synthesized FeSe films by the electrochemical deposition in the electrolyte containing FeCl_{2}\cdot4H_{2}O, SeO_{2} and Na_{2}SO_{4}. The composition ratio of Fe and Se was controlled by the synthesis voltage and pH value. The FeSe film with the composition ratio of Fe : Se = 1 : 1 is fabricated at a voltage of -0.9 V and pH 2.1 in our electrochemical deposition. This sample has a highly crystalline tetragonal FeSe structure and exhibits a superconducting transition at 8.1 K, comparable to FeSe synthesized by other methods.
We use scanning tunnelling microscopy and spectroscopy to explore the electronic structure of Fe$_{1.07}$Te which is the parent compound of the iron-chalcogenide superconductors. A unidirectional electronic structure with a period of $a_{0}$ (where $a_{0}$ is the lattice constant) along the a-axis is observed. The unidirectional pattern is visible within an energy range from approximately -200 to +130 meV. Since the direction of the unidirectional electronic structure coincides with those of the underlying antiferromagnetic and the predicted orbital orders, it is presumable that the observed unidirectional structure is closely tied to these orders and is peculiar to the parent state in iron-based superconductors.
We have established a simple process that allows for the one-step synthesis of KxFe2-ySe2 single crystals, which exhibit high critical current density Jc. The post annealing and quenching technique has improved the homogeneity of as-grown crystals, resulting in full shielding of the external magnetic field. The quenched crystals show a superconducting transition at Tconset = 32.9 K and Tczero = 32.1 K. The upper critical fields μ_{0}Hc2(0) for H//ab and H//c are estimated to be ~206 and ~50 T, respectively. The critical current densities Jc for H//ab and H//c reach as high as 1.0\times10^{5} and 3.4\times10^{4} A/cm2 at 5 K. Furthermore, Jc exhibits a high field performance and a significantly weak temperature dependence up to 5 T, suggesting strong pinning. These results demonstrate that KxFe2-ySe2 would be a promising candidate material for practical applications.
Superconductivity of Fe0.95Te0.85S0.15 was induced and enhanced by immersing the as-grown (non-superconducting) sample into sulfuric acid. Dissolved Fe was detected in the sulfuric acid treatment, indicating that excess Fe was removed from the Fe0.95Te0.85S0.15 sample.
We have measured local structure of superconducting K_{0.8}Fe_{1.6}Se_{2} chalcogenide (T_{c}=31.8 K) by temperature dependent polarized extended x-ray absorption fine structure (EXAFS) at the Fe and Se K-edges. We find that the system is characterized by a large local disorder. The Fe-Se and Fe-Fe distances are found to be shorter than the distances measured by diffraction, while the corresponding mean square relative displacements reveal large Fe-site disorder and relatively large c-axis disorder. The local force constant for Fe-Se bondlength (k ~ 5.8 eV/Å^{2}) is similar to the one found in the binary FeSe superconductor, however, the Fe-Fe bondlength appears to get flexible (k ~ 2.1 eV/Å^{2}) in comparison to the binary FeSe (k ~ 3.5 eV/Å^{2}), an indication of partly relaxed Fe-Fe networks in K_{0.8}Fe_{1.6}Se_{2}. The results suggest glassy nature of the title system, with the superconductivity being similar to the one in the granular materials.
The transport and structural properties of Fe1+yTe1-xSx (x=0, 0.05, and 0.10) crystals were studied in pulsed magnetic fields up to 65 T. The application of high magnetic fields results in positive magnetoresistance effect with prominent hystereses in the antiferromagnetic state. Polarizing microscope images obtained at high magnetic fields showed simultaneous occurrence of structural transitions. These results indicate that magnetoelastic coupling is the origin of the bicollinear magnetic order in iron chalcogenides.
The red wine dependence of superconductivity in FeTe0.8S0.2 was investigated. Samples with a higher shielding volume fraction had a tendency to show a higher concentration of tartaric acid in red wine. We found the tartaric acid is one of the key factors to induce superconductivity in FeTe0.8S0.2.
Enhancements of superconducting properties were observed in FeSe wires using a quenching technique. Zero resistivity was achieved at about 10 K in quenched wires, which is about 2 K higher than that of polycrystalline FeSe bulk. Furthermore, transport Jc of quenched wires showed three times higher than that of furnace-cooled wires. In contrast, the quenched polycrystalline FeSe bulks did not show the enhancement of Tc. The quenching technique is a greatly promising for fabricating FeSe wires with high Tc and high Jc, and quenched FeSe wires have high potential for superconducting wire applications.
We report the successful fabrication of mono- and seven-core superconducting wires of FeSe1-xTex using an in-situ Fe-diffusion process based on the powder-in-tube (Fe-diffusion PIT) method. The reacted layer in these wires were found to have composite structure with composition nearly FeSe and FeTe for the inner and outer layers, although a single layer of composition FeSe0.5Te0.5 was supposed to be formed. The self-field transport Jc values at 4.2 K were found to be 226.2 A/cm2 and 100.3 A/cm2 respectively for mono- and seven-core wires. The Jc's of mono- and seven-core wires dropped rapidly at low fields and then showed a gradual decrease with increasing magnetic fields. In addition, the seven-core wire showed higher Jc than the mono-core wire under higher magnetic fields, indicating that the seven-core wire of FeSe1-xTex superconductor using Fe-diffusion PIT method is advantageous for the superconducting-wire application under high magnetic fields.
The superconducting FeSe films were successfully fabricated using the electrochemical synthesis. The composition ratio of Fe and Se can be controlled by the electric potential and pH value. We found that the FeSe films deposited at the electric potential -1.75 V and pH 2.3 show the superconducting transition at 3.5 K. The establishment of this electrochemical synthesis technique will provide many advantages for application.
Intrinsic Josephson junction (IJJ) stacks of cuprate superconductors have potential to be implemented as intrinsic phase qubits working at relatively high temperatures. We report success in fabricating submicron La$_{2-x}$Sr$_{x}$CuO$_{4}$ (LSCO) IJJ stacks carved out of single crystals. We also show a new fabrication method in which argon ion etching is performed after focused ion beam etching. As a result, we obtained an LSCO IJJ stack in which resistive multi-branches appeared. It may be possible to control the number of stacked IJJs with an accuracy of a single IJJ by developing this method.
Temperature dependent single-crystal x-ray diffraction (XRD) in transmission mode probing the bulk of the newly discovered K0.8Fe1.6Se2 superconductor (Tc = 31.8 K) using synchrotron radiation is reported. A clear evidence of intrinsic phase separation at 520 K between two competing phases, (i) a first majority magnetic phase with a ThCr2Si2-type tetragonal lattice modulated by the iron vacancy ordering and (ii) a minority non-magnetic phase having an in-plane compressed lattice volume and a weak superstructure, is reported. The XRD peaks due to the Fe vacancy ordering in the majority phase disappear by increasing the temperature at 580 K, well above phase separation temperature confirming the order-disorder phase transition. The intrinsic phase separation at 520K between a competing first magnetic phase and a second non-magnetic phase in the normal phase both having lattice superstructures (that imply different Fermi surface topology reconstruction and charge density) is assigned to a lattice-electronic instability of the K0.8Fe1.6Se2 system typical of a system tuned at a Lifshitz critical point of an electronic topological transition that gives a multi-gaps superconductor tuned a shape resonance.