arXiv subjects

Yoshinori Sueno

Publications and source records attributed to Yoshinori Sueno.

13 recordsLinked to original sources

arXiv2026

The Simons Observatory: Frequency-resolved beam calibration for the SO SATs with POLOCALC

We present a far-field beam calibration of the Simons Observatory (SO) Small Aperture Telescopes (SATs) using scanned single-frequency measurements of a drone-mounted source emitting in the 90 GHz band, where the SATs have an angular resolution of $\sim$30$'$. We then compare the results from two campaigns in April and December 2025 to the band-averaged beams from planet observations by the SATs. Measuring the telescope beam response at different frequencies across the observing bands enables modeling the system's frequency-dependent behavior. This helps track optical non-idealities. The comparison with planet beams informs the frequency resolution necessary to accurately reconstruct the band-averaged beams in this way; it uses only the average drone and planet products, as it is intended to demonstrate the feasibility of the frequency-resolved calibration scheme rather than to set the precise beam covariance and instrument requirements. We find that the beams of the two SATs near 90 GHz follow the frequency scaling expected for diffraction-limited optics, with only modest deviations observed in the nearest lobes of one telescope. We establish consistency between the real band-averaged planet beams and the synthesized drone band-averaged beams for the center wafers of both telescopes, with an average deviation smaller than 4% for multipoles $\ell < 500$.

astro-ph.IM↗

arXiv2026

The Simons Observatory: Rotation Performance of Cryogenic Half-Wave Plate Polarization Modulators

We present the on-site rotation performance of the first three cryogenic continuously rotating half-wave plate (HWP) polarization modulators for the Simons Observatory small aperture telescopes (SATs). The SATs operate at an altitude of 5200 m in the Atacama Desert in northern Chile, and measure the degree-scale cosmic microwave background polarization to search for primordial $B$-mode polarization. To this end, the SATs employ a 505 mm diameter 50 K cryogenic HWP polarization modulator to suppress atmospheric $1/f$ noise and to mitigate systematic uncertainties. We present methods for reconstructing the rotation of our polarization modulators, enabling detailed evaluations of their rotation angle accuracy, stability, displacements, and vibrations. We achieve the required rotation angle accuracy in more than 99.9% of observations, with a median noise level of $0.16\,μ\text{rad}\sqrt{\text{s}}$. We also achieve one-dimensional measurement of the rotor displacement with an accuracy of $0.06\,μ\text{m}\sqrt{\text{s}}$. Our results demonstrate the on-site rotation performance, rotation angle reconstruction method, and robustness of the polarization modulators. This is a crucial step towards achieving the SAT science goals.

astro-ph.IM↗

arXiv2026

The Simons Observatory: Commissioning of the Mid-Frequency Small Aperture Telescopes

The Simons Observatory (SO) is a cosmic microwave background (CMB) survey experiment observing from an altitude of 5,200 m in the Atacama Desert in Chile. The SO Small Aperture Telescopes (SATs) will cover six spectral bands between 30 and 280 GHz primarily to search for evidence of primordial gravitational waves in the large angular scale $B$-modes of the CMB polarization. The first two Mid-Frequency (MF) SATs, operating in the 90 and 150 GHz frequency bands, began commissioning observations in late 2023, and we present the results of those observations here. Each MF SAT operates with approximately 9,400 biased transition-edge sensors (TES) at 1 mm of precipitable water vapor (PWV), representing a typical 80% yield. Planet observations confirm the telescope optics performance, calibrate the instrument response, and measure the end-to-end optical efficiency of the SATs. The realized instrument efficiencies are within the range expected based on instrument model predictions. In nominal observing conditions, the noise equivalent temperatures from both telescopes combined are $2.4~\mathrm{μK_{CMB}\sqrt{s}}$ at 90 GHz and $3.2~\mathrm{μK_{CMB}\sqrt{s}}$ at 150 GHz, substantially outperforming the baseline instantaneous sensitivity targets for the observatory.

astro-ph.IM↗

arXiv2026

GroundBIRD: First On-Sky Responsivity Calibration at the Teide Observatory

GroundBIRD is a cosmic microwave background (CMB) experiment located at the Teide Observatory (altitude $\sim2400$ m, Spain) designed to measure large-angular-scale intensity and polarization anisotropies ($\ell \gtrsim 6$ to $\ell \sim 300$) to constrain the reionization optical depth, $τ$. The instrument employs a rapidly rotating telescope with a fixed elevation of $70$ deg and is equipped with 161 lenslet-coupled kinetic inductance detectors (KIDs): 138 at 145 GHz for CMB observations and 23 at 220 GHz for thermal dust characterization, all operated at $\sim280$ mK. This scan strategy provides daily coverage of $\sim$40% of the Northern Hemisphere sky. We present the first on-sky responsivity calibration model for GroundBIRD, derived from repeated observations of Jupiter using the twelve most stable KIDs from GroundBIRD array 6 (GB06). The analysis establishes and validates a calibration methodology for this detector subset while providing the first empirical characterization of detector responsivity as a function of precipitable water vapor (PWV). We find that the responsivity decreases by approximately 30% across the sampled PWV range and is well described by a linear PWV-dependent model. Comparison with Moon observations reveals distinct detector operating regimes associated with different optical loading conditions. The Jupiter-based calibration achieves better than 20% precision under typical observing conditions and better than 20% relative stability over a one-month timescale. These results establish the basis for extending the calibration methodology to the full GroundBIRD focal plane.

astro-ph.IM↗

arXiv2026

The Simons Observatory: Quantifying the impact of beam chromaticity on large-scale B-mode science

The Simons Observatory (SO) Small Aperture Telescopes (SATs) will observe the Cosmic Microwave Background (CMB) temperature and polarization at six frequency bands. Within these bands, the angular response of the telescope (beam) is convolved with the instrument's spectral response (commonly called bandpass) and the signal from the sky, which leads to the band-averaged telescope beam response, which is sampled and digitized. The spectral properties of the band-averaged beam depend on the natural variation of the beam within the band, referred to as beam chromaticity. In this paper, we quantify the impact of the interplay of beam chromaticity and intrinsic frequency scaling from the various components that dominate the polarized sky emission on the tensor-to-scalar ratio, $r$, and foreground parameters. We do so by employing a parametric power-spectrum-based foreground component separation algorithm, namely BBPower, to which we provide beam-convolved time domain simulations performed with the beamconv software while assuming an idealized version of the SO SAT optics. We find a small, $0.02σ$, bias on $r$, due to beam chromaticity, which seems to mostly impact the dust spatial parameters, causing a maximum $0.77 σ$ bias on the dust $B$-mode spectra amplitude, $A_{d}$, when employing Gaussian foreground simulations. However, we find all parameter biases to be smaller than $1σ$ at all times, independently of the foreground model. This includes the case where we introduce additional uncertainty on the bandpass shape, which accounts for approximately half of the total allowed gain uncertainty, as estimated in previous work for the SO SATs.

astro-ph.CO↗

arXiv2026

The Simons Observatory: On-sky performance of radio-transparent multi-layer insulation (RT-MLI) using Styroace-II Styrofoam

We present the on-sky performance of a Radio-Transparent Multi-Layer Insulation filter (RT-MLI) that uses Styroace-II styrofoam to reject ambient thermal radiation from entering a 0.42 m diameter aperture to a sub-100 mK bolometric detector array cooled by a dilution-refrigerator. We find that greater than 90% of the expected incident infra-red (IR) radiation is rejected, resulting in $<$12 W of measured transmitted power. Transmitted power in the detector passbands is consistent with a lower bound of 95%. We address filter design and placement, thermal loading, and mm-wave transmission.

astro-ph.IM↗

arXiv2025

The Simons Observatory: Detector Polarization Angle Calibration using Sparse Wire Grid with Initial Data Sets of the Small Aperture Telescope

Improved measurements of $B$-modes in the cosmic microwave background can be obtained through accurate calibration of the orientation of detector antennas as projected onto the sky. Miscalibration of the detector polarization angle leads to a leakage of $E$-modes into $B$-modes, which can bias the detection of the latter. To achieve a $σ(r)$ of 0.003, the Simons Observatory Small Aperture Telescopes are required to calibrate the global polarization angle on the sky with an accuracy ${\lesssim}0.1^\circ$. We demonstrate a fully remote-controllable calibration system using a ``sparse wire grid," which injects a rotatable linear polarized signal across the telescope's focal plane. This calibration system is installed and operational on a Small Aperture Telescope at its observing site at the Parque Astronómico in the Atacama desert in Chile. We developed a pipeline for the detector polarization angle calibration, and demonstrate it using initial data for 93~GHz and 145~GHz frequency bands. The observed distribution of detector polarization angles is in agreement with the instrument design. Statistical uncertainties for the relatively calibrated polarization angles are $0.02^\circ$ and $0.03^\circ$ at 93~GHz and 145~GHz, respectively. Systematic uncertainty was evaluated to be $0.08^\circ$ at the hardware development and fabrication stage. Their sum in quadrature is less than $0.1^\circ$.

astro-ph.IM↗

arXiv2025

The Simons Observatory: Validation of reconstructed power spectra from simulated filtered maps for the Small Aperture Telescope survey

We present a transfer function-based method to estimate angular power spectra from filtered maps for cosmic microwave background (CMB) surveys. This is especially relevant for experiments targeting the faint primordial gravitational wave signatures in CMB polarisation at large scales, such as the Simons Observatory (SO) small aperture telescopes. While timestreams can be filtered to mitigate the contamination from low-frequency noise, usual methods that calculate the mode coupling at individual multipoles can be challenging for experiments covering large sky areas or reaching few-arcminute resolution. The method we present here, although approximate, is more practical and faster for larger data volumes. We validate it through the use of simulated observations approximating the first year of SO data, going from half-wave plate-modulated timestreams to maps, and using simulations to estimate the mixing of polarisation modes induced by an example of time-domain filtering. We show its performance through an example null test and with an end-to-end pipeline that performs inference on cosmological parameters, including the tensor-to-scalar ratio $r$. The performance demonstration uses simulated observations at multiple frequency bands. We find that the method can recover unbiased parameters for our simulated noise levels.

astro-ph.CO↗

arXiv2024

Commissioning the CMB polarization telescope GroundBIRD with the full set of detectors

GroundBIRD is a ground-based cosmic microwave background (CMB) experiment for observing the polarization pattern imprinted on large angular scales ($\ell > 6$ ) from the Teide Observatory in Tenerife, Spain. Our primary scientific objective is a precise measurement of the optical depth $τ$ ($σ(τ) \sim 0.01$) to the reionization epoch of the Universe to cross-check systematic effects in the measurements made by previous experiments. GroundBIRD observes a wide sky area in the Northern Hemisphere ($\sim 40\%$ of the full sky) while continuously rotating the telescope at a high speed of up to 20 rotations per minute (rpm) to overcome the fluctuations of atmospheric radiation. We have adopted the NbTiN/Al hybrid microwave kinetic inductance detectors (MKIDs) as focal plane detectors. We observe two frequency bands centered at 145 GHz and 220 GHz. The 145 GHz band picks up the peak frequency of the CMB spectrum. The 220 GHz band helps accurate removal of the contamination of thermal emission from the Galactic interstellar dust. The MKID arrays (138 MKIDs for 145GHz and 23 MKIDs for 220GHz) were designed and optimized so as to minimize the contamination of the two-level-system noise and maximize the sensitivity. The MKID arrays were successfully installed in May 2023 after the performance verification tests were performed at a laboratory. GroundBIRD has been upgraded to use the full MKID arrays, and scientific observations are now underway. The telescope is automated, so that all observations are performed remotely. Initial validations, including polarization response tests and observations of Jupiter and the moon, have been completed successfully. We are now running scientific observations.

astro-ph.IM↗

arXiv2023

Search for Dark Photon Dark Matter in the Mass Range $74\mbox{--}110\,μ\mathrm{eV}/c^2$ with a Cryogenic Millimeter-Wave Receiver

We search for the dark photon dark matter (DPDM) using a cryogenic millimeter-wave receiver. DPDM has a kinetic coupling with electromagnetic fields with a coupling constant of $χ$, and is converted into ordinary photons at the surface of a metal plate. We search for signal of this conversion in the frequency range $18\text{--}26.5\,\mathrm{GHz}$, which corresponds to the mass range $74\text{--}110\,mu\mathrm{eV}/c^2$. We observed no significant signal excess, allowing us to set an upper bound of $χ< (0.3\text{--}2.0)\times 10^{-10}$ at 95\% confidence level. This is the most stringent constraint to date, and tighter than cosmological constraints. Improvements from previous studies are obtained by employing a cryogenic optical path and a fast spectrometer.

hep-ex↗

arXiv2022

Characterization of two-level system noise for microwave kinetic inductance detector comprising niobium film on silicon substrate

A microwave kinetic inductance detector (MKID) is a cutting-edge superconducting detector. It comprises a resonator circuit constructed with a superconducting film on a dielectric substrate. To expand its field of application, it is important to establish a method to suppress the two-level system (TLS) noise that is caused by the electric fluctuations between the two energy states at the surface of the substrate. The electric field density can be decreased by expanding the strip width (S) and gap width from the ground plane (W) in the MKID circuit, allowing the suppression of TLS noise. However, this effect has not yet been confirmed for MKIDs made with niobium films on silicon substrates. In this study, we demonstrate its effectiveness for such MKIDs. We expanded the dimension of the circuit from (S, W) = (3.00 $μ$m, 4.00 $μ$m) to (S, W) = (5.00 $μ$m, 23.7 $μ$m), and achieved an increased suppression of 5.5 dB in TLS noise.

physics.ins-det↗

arXiv2021

A forecast of the sensitivity on the measurement of the optical depth to reionization with the GroundBIRD experiment

We compute the expected sensitivity on measurements of optical depth to reionization for a ground-based experiment at Teide Observatory. We simulate polarized partial sky maps for the GroundBIRD experiment at the frequencies 145 and 220 GHz. We perform fits for the simulated maps with our pixel-based likelihood to extract the optical depth to reionization. The noise levels of polarization maps are estimated as 110 $μ\mathrm{K~arcmin}$ and 780 $ μ\mathrm{K~arcmin}$ for 145 and 220 GHz, respectively, by assuming a three-year observing campaign and sky coverages of 0.537 for 145 GHz and 0.462 for 220 GHz. Our sensitivities for the optical depth to reionization are found to be $σ_τ$=0.030 with the simulated GroundBIRD maps, and $σ_τ$=0.012 by combining with the simulated QUIJOTE maps at 11, 13, 17, 19, 30, and 40 GHz.

astro-ph.CO↗

arXiv2020

A method to measure superconducting transition temperature of microwave kinetic inductance detector by changing power of readout microwaves

A microwave kinetic inductance detector (MKID) is a cutting-edge superconducting detector, and its principle is based on a superconducting resonator circuit. The superconducting transition temperature (Tc) of the MKID is an important parameter because various MKID characterization parameters depend on it. In this paper, we propose a method to measure the Tc of the MKID by changing the applied power of the readout microwaves. A small fraction of the readout power is deposited in the MKID, and the number of quasiparticles in the MKID increases with this power. Furthermore, the quasiparticle lifetime decreases with the number of quasiparticles. Therefore, we can measure the relation between the quasiparticle lifetime and the detector response by rapidly varying the readout power. From this relation, we estimate the intrinsic quasiparticle lifetime. This lifetime is theoretically modeled by Tc, the physical temperature of the MKID device, and other known parameters. We obtain Tc by comparing the measured lifetime with that acquired using the theoretical model. Using an MKID fabricated with aluminum, we demonstrate this method at a 0.3 K operation. The results are consistent with those obtained by Tc measured by monitoring the transmittance of the readout microwaves with the variation in the device temperature. The method proposed in this paper is applicable to other types, such as a hybrid-type MKID.

physics.ins-det↗