arXiv subjects

Yotam Vaknin

Publications and source records attributed to Yotam Vaknin.

9 recordsLinked to original sources

arXiv2026

Fault-tolerant distributed quantum computing with a single nucleus per node

Distributed quantum computing interconnects small, high-quality nodes through optical links, but this architecture carries a pronounced asymmetry: in-node gates and measurements are cheap and high-fidelity, whereas inter-node communication relies on a low-coherence communication qubit and faulty photonics. Previous approaches overcame the noisy link by placing several high-quality data qubits in each node and consuming them for Bell pair and GHZ state distillation. Here we show that distillation can be avoided altogether. The key observation is that we can engineer a communication error bias, where photonic Bell pairs suffer frequent phase errors but only rare bit-flip errors. We design the syndrome-extraction circuits so that this phase noise appears solely as a measurement error that does not propagate to the data qubits, and is therefore suppressed by simply repeating the measurement; letting the error-correcting code itself, rather than a dedicated distillation subroutine, to purify the link. This dramatically reduces the need for ancillary nuclei: Floquet codes require only a single data qubit per node, while general stabilizer codes require just one additional ancilla. We demonstrate high error-correction thresholds throughout this regime, and we identify lattice surgery as inherently robust for this setting, enabling logical operations at a threshold close to that of quantum memory. As a result, the performance of the quantum computer is limited by the high-quality data qubits, while the requirements on photon indistinguishability and coherence of the communication qubit are substantially relaxed.

quant-ph↗

arXiv2026

Fast measurement of neutral atoms with a multi-atom gate

Measurement time represents a critical bottleneck limiting the operational speed of neutral atom quantum computers, as it cannot be accelerated through parallelization like other quantum operations. We present a protocol for fast measurement of neutral atoms based on a new, fast multi-atom Rydberg gate that significantly reduces the measurement integration time and improves the measurement fidelity. Our approach employs a multi-qubit register of $N$ ancilla atoms within a single Rydberg blockade region to measure a single data qubit. This enables an $N$-fold enhancement in photon emission collections, while reducing the measurement's sensitivity to loss. The scheme requires spectral separation between the data qubit and the ancillae, achievable through either a dual-species architecture or a targeted light shift. Beyond this, the scheme is straightforward to implement: it relies only on global pulses, global photon collection, and avoids both atom shuttling and numerically optimized pulses. Simulations of a Cs--Rb platform demonstrate that with only five ancillae ($N=5$), measurement infidelity below $10^{-3}$ within $6\ μ\text{s}$ is achievable.

quant-ph↗

arXiv2026

Efficient Magic State Cultivation on the Surface Code

Magic state cultivation is a leading approach for generating the resource states required for fault-tolerant quantum computation. Here we present a new cultivation protocol that increases the success probability of magic-state generation in platforms with flexible and non-local connectivity. Our method implements cultivation directly on the surface code, avoiding the detour through alternative, less efficient error-correcting codes used in prior approaches. This both improves the acceptance rate and preserves compatibility with the geometry of the code and the hardware. Numerical simulations show that our protocols improve success probabilities and reduce output error rates compared with protocols tailored to locally connected platforms. Under realistic noise models for cold-atom and trapped-ion systems, we improve the rate of magic state generation by more than a factor of 20. Finally, we study qubit loss and erasure, and show that very low error rates can be achieved with minimal overhead, reaching below $10^{-6}$ infidelity using only nine physical erasure qubits.

quant-ph↗

arXiv2026

Optimizing quantum error correction protocols with erasure qubits

Erasure qubits offer a promising avenue toward reducing the overhead of quantum error correction (QEC) protocols. However, they require additional operations, such as erasure checks, that may add extra noise and increase runtime of QEC protocols. To assess the benefits provided by erasure qubits, we focus on the performance of the surface code as a quantum memory. In particular, we analyze various erasure check schedules, find the correctable regions in the phase space of error parameters and probe the subthreshold scaling of the logical error rate. We then consider a realization of erasure qubits in the superconducting hardware architectures via dual-rail qubits. We use the standard transmon-based implementation of the surface code as the performance benchmark. Our results indicate that QEC protocols with erasure qubits can outperform the ones with state-of-the-art transmons, even in the absence of precise information about the locations of erasure errors.

quant-ph↗

arXiv2025

Magic State Injection with Erasure Qubits

Erasure qubits constitute a promising approach for tackling the daunting resources required for fault-tolerant quantum computing. By heralding erasure errors, both the error-correction threshold and the sub-threshold scaling of the logical error rate are significantly improved. While previous research has focused primarily on fault-tolerant quantum memories, we extend this investigation to magic state injection--a critical yet resource-intensive component of fault-tolerant quantum computation. We show that, after postselecting on erasures, the logical error rate of the injected magic state is set by the residual Pauli error, while the space-time overhead is only marginally increased as compared to non-erasure qubits with a similar noise strength. These conclusions hold both for injection into the surface code, and for injection and cultivation on the color code. For the former, we show that most of the gains can be achieved by using just three strategically placed erasure qubits in the surface code patch, independent of the patch size. For the latter, in contrast, it is beneficial to have all the qubits in the cultivation patch be erasure qubits. Our results for cultivation suggest that algorithmically relevant logical error rates may be within reach without magic state distillation for erasure rates $\lesssim 4\times 10^{-3}$ and residual Pauli error rates $\sim 10^{-4}$.

quant-ph↗

arXiv2024

Demonstrating a long-coherence dual-rail erasure qubit using tunable transmons

Quantum error correction with erasure qubits promises significant advantages over standard error correction due to favorable thresholds for erasure errors. To realize this advantage in practice requires a qubit for which nearly all errors are such erasure errors, and the ability to check for erasure errors without dephasing the qubit. We demonstrate that a "dual-rail qubit" consisting of a pair of resonantly coupled transmons can form a highly coherent erasure qubit, where transmon $T_1$ errors are converted into erasure errors and residual dephasing is strongly suppressed, leading to millisecond-scale coherence within the qubit subspace. We show that single-qubit gates are limited primarily by erasure errors, with erasure probability $p_\text{erasure} = 2.19(2)\times 10^{-3}$ per gate while the residual errors are $\sim 40$ times lower. We further demonstrate mid-circuit detection of erasure errors while introducing $< 0.1\%$ dephasing error per check. Finally, we show that the suppression of transmon noise allows this dual-rail qubit to preserve high coherence over a broad tunable operating range, offering an improved capacity to avoid frequency collisions. This work establishes transmon-based dual-rail qubits as an attractive building block for hardware-efficient quantum error correction.

quant-ph↗

arXiv2022

Erasure qubits: Overcoming the $T_1$ limit in superconducting circuits

The amplitude damping time, $T_1$, has long stood as the major factor limiting quantum fidelity in superconducting circuits, prompting concerted efforts in the material science and design of qubits aimed at increasing $T_1$. In contrast, the dephasing time, $T_ϕ$, can usually be extended above $T_1$ (via, e.g., dynamical decoupling), to the point where it does not limit fidelity. In this article we propose a scheme for overcoming the conventional $T_1$ limit on fidelity by designing qubits in a way that amplitude damping errors can be detected and converted into erasure errors. Compared to standard qubit implementations our scheme improves the performance of fault-tolerant protocols, as numerically demonstrated by the circuit-noise simulations of the surface code. We describe two simple qubit implementations with superconducting circuits and discuss procedures for detecting amplitude damping errors, performing entangling gates, and extending $T_ϕ$. Our results suggest that engineering efforts should focus on improving $T_ϕ$ and the quality of quantum coherent control, as they effectively become the limiting factor on the performance of fault-tolerant protocols.

quant-ph↗

arXiv2022

Coupled Surface Diffusion and Mean Curvature Motion: Axisymmetric Steady States with Two Grains and a Hole

The evolution of two grains, which lie on a substrate and are in contact with each other, can be roughly described by a model in which the exterior surfaces of the grains evolve by surface diffusion and the grain boundary, namely the contact surface between the adjacent grains, evolves by motion by mean curvature. We consider an axi-symmetric two grain system, contained within an inert bounding semi-infinite cylinder with a hole along the axis of symmetry. Boundary conditions are imposed reflecting the considerations of W.W. Mullins, 1958. We focus here on the steady states of this system. At steady state, the exterior surfaces have constant and equal mean curvatures, and the grain boundary has zero mean curvature; the exterior surfaces are nodoids and the grain boundary surface is a catenoid. The physical parameters in the model can be expressed via two angles $β$ and $θ_c$, which depend on the surface free energies. Typically if a steady state solution exists for given values of $(β, θ_c)$, then there exists a continuum of such solutions. In particular, we prove that there exists a continuum of solutions with $θ_c=π$ for any $β\in (π/2, π)$.

math.AP↗

arXiv2020

On the robustness of the NV-NMR spectrometer setup to magnetic field inhomogeneities

The NV-NMR spectrometer is a promising candidate for detection of NMR signals at the nano scale. Field inhomogeneities, however, are a major source of noise that limits spectral resolution in state of the art NV - NMR experiments and constitutes a major bottleneck in the development of nano scale NMR. Here we propose, a route in which this limitation could be circumvented in NV-NMR spectrometer experiments, by utilising the nanometric scale and the quantumness of the detector.

quant-ph↗