arXiv subjects

Yu Sheng

Publications and source records attributed to Yu Sheng.

27 records · Page 2Linked to original sources

arXiv2020

All-Linear Multistate Magnetic Switching Induced by Electrical Current

We present an alternative mechanism to control the domain wall motion, whose directions are manipulated by the amplitude of electrical currents when modulating the ratio of D/A (constants of Dzyaloshinskii-Moriya interaction over exchange interaction). To confirm this mechanism, we observe this type of domain wall motion and demonstrate linear magnetic switching without hysteresis effect via adjusting the D/A of Ta/Pt/Co/Ta multilayer device with ion implantations. We further find field-free biased and chirally controllable multistate switching at the lateral interface of ion exposed and unexposed area, which is due to the current induced Neel wall motion and a strong exchange coupling at this interface.

physics.app-ph↗

arXiv2019

Deterministic magnetization switching using lateral spin-orbit torque

Current-induced magnetization switching by spin-orbit torque (SOT) holds considerable promise for next generation ultralow-power memory and logic applications. In most cases, generation of spin-orbit torques has relied on an external injection of out-of-plane spin currents into the magnetic layer, while an external magnetic field along the electric current direction is generally required for realizing deterministic switching by SOT. Here, we report deterministic current-induced SOT full magnetization switching by lateral spin-orbit torque in zero external magnetic field. The Pt/Co/Pt magnetic structure was locally annealed by a laser track along the in-plane current direction, resulting in a lateral Pt gradient within the ferromagnetic layer, as confirmed by microstructure and chemical composition analysis. In zero magnetic field, the direction of the deterministic current-induced magnetization switching depends on the location of the laser track, but shows no dependence on the net polarization of external out-of-plane spin currents. From the behavior under external magnetic fields, we identify two independent mechanisms giving rise to SOT, i.e. the lateral Pt-Co asymmetry as well as out-of-plane injected spin currents, where the polarization and the magnitude of the SOT in the former case depends on the relative location and the laser power of the annealing track. Our results demonstrate an efficient field-free deterministic full magnetization switching scheme, without requiring out-of-plane spin current injection or complex external stack structures.

cond-mat.mes-hall↗

arXiv2019

Atomic Origin of Spin-Valve Magnetoresistance at the SrRuO3 Grain Boundary

Defects ubiquitously exist in crystal materials and usually exhibit a very different nature than the bulk matrix, and hence, their presence can have significant impacts on the properties of devices. Although it is well accepted that the properties of defects are determined by their unique atomic environments, the precise knowledge of such relationships is far from clear for most oxides due to the complexity of defects and difficulties in characterization. Here, we fabricate a 36.8° SrRuO3 grain boundary of which the transport measurements show a spin-valve magnetoresistance. We identify its atomic arrangement, including oxygen, using scanning transmission electron microscopy and spectroscopy. Based on the as-obtained atomic structure, the density functional theory calculations suggest that the spin-valve magnetoresistance is because of the dramatically reduced magnetic moments at the boundary. The ability to manipulate magnetic properties at the nanometer scale via defect control allows new strategies to design magnetic/electronic devices with low-dimensional magnetic order.

cond-mat.mtrl-sci↗

arXiv2019

Spin Logic Devices via Electric Field Controlled Magnetization Reversal by Spin-Orbit Torque

We describe a spin logic device with controllable magnetization switching of perpendicularly magnetized ferromagnet / heavy metal structures on a ferroelectric (1-x)[Pb(Mg1/3Nb2/3)O3]-x[PbTiO3] (PMN-PT) substrate using current-induced spin-orbit torque. The devices were operated without an external magnetic field and controlled by voltages as low as 10 V applied across the PMN-PT substrate, which is much lower compared to previous reports (500 V). The deterministic switching with smaller voltage was realized from the virgin state of the PMN-PT. Ferroelectric simulation shows the unsaturated minor loop exhibits obvious asymmetries in the polarizations. Larger polarization can be induced from the initial ferroelectric state, while it is difficult for opposite polarization. The XNOR, AND, NAND and NOT logic functions were demonstrated by the deterministic magnetization switching from the interaction between the spin-orbit torque and electric field at the PMN-PT/Pt interface. The nonvolatile spin logic scheme in this work is simple, scalable, programmable, which are favorable in the logic-in-memory design with low energy consumption.

physics.app-ph↗

arXiv2018

Tuning a binary ferromagnet into a multi-state synapse with spin-orbit torque induced plasticity

Inspired by ion-dominated synaptic plasticity in human brain, artificial synapses for neuromorphic computing adopt charge-related quantities as their weights. Despite the existing charge derived synaptic emulations, schemes of controlling electron spins in ferromagnetic devices have also attracted considerable interest due to their advantages of low energy consumption, unlimited endurance, and favorable CMOS compatibility. However, a generally applicable method of tuning a binary ferromagnet into a multi-state memory with pure spin-dominated synaptic plasticity in the absence of an external magnetic field is still missing. Here, we show how synaptic plasticity of a perpendicular ferromagnetic FM1 layer can be obtained when it is interlayer-exchange-coupled by another in-plane ferromagnetic FM2 layer, where a magnetic-field-free current-driven multi-state magnetization switching of FM1 in the Pt/FM1/Ta/FM2 structure is induced by spin-orbit torque. We use current pulses to set the perpendicular magnetization state which acts as the synapse weight, and demonstrate spintronic implementation of the excitatory/inhibitory postsynaptic potentials and spike timing-dependent plasticity. This functionality is made possible by the action of the in-plane interlayer exchange coupling field which leads to broadened, multi-state magnetic reversal characteristics. Numerical simulations, combined with investigations of a reference sample with a single perpendicular magnetized Pt/FM1/Ta structure, reveal that the broadening is due to the in-plane field component tuning the efficiency of the spin-orbit-torque to drive domain walls across a landscape of varying pinning potentials. The conventionally binary FM1 inside our Pt/FM1/Ta/FM2 structure with inherent in-plane coupling field is therefore tuned into a multi-state perpendicular ferromagnet and represents a synaptic emulator for neuromorphic computing.

cond-mat.mes-hall↗

arXiv2018

Adjustable current-induced magnetization switching utilizing interlayer exchange coupling

Electrical current-induced deterministic magnetization switching in a magnetic multilayer structure without external magnetic field is realized by utilizing interlayer exchange coupling. Two ferromagnetic Co layers, with in-plane and out-of-plane anisotropy respectively, are separated by a spacer Ta layer, which plays a dual role of inducing antiferromagnetic interlayer coupling, and contributing to the current-induced effective magnetic field through the spin Hall effect. The current-induced magnetization switching behavior can be tuned by pre-magnetizing the in-plane Co layer. The antiferromagnetic exchange coupling field increases with decreasing thickness of the Ta layer, reaching 630+-5 Oe for a Ta thickness of 1.5nm. The magnitude of the current-induced perpendicular effective magnetic field from spin-orbit torque is 9.2 Oe/(107Acm-2). The large spin Hall angle of Ta, opposite in sign to that of Pt, results in a low critical current density of 9*10^6A/cm^2. This approach is promising for the electrical switching of magnetic memory elements without external magnetic field.

cond-mat.mtrl-sci↗

arXiv2016

Piezo Voltage Controlled Planar Hall Effect Devices

The electrical control of the magnetization switching in ferromagnets is highly desired for future spintronic applications. Here we report on hybrid piezoelectric (PZT) /ferromagnetic (Co2FeAl) devices in which the planar Hall voltage in the ferromagnetic layer is tuned solely by piezo voltages. The change of planar Hall voltage is associated with magnetization switching through 90 in the plane under piezo voltages. Room temperature magnetic NOT and NOR gates are demonstrated based on the piezo voltage controlled Co2FeAl planar Hall effect devices without the external magnetic field. Our demonstration may lead to the realization of both information storage and processing using ferromagnetic materials.

cond-mat.mes-hall↗

arXiv2016

Electric field control of deterministic current-induced magnetization switching in a hybrid ferromagnetic/ferroelectric structure

All-electrical and programmable manipulations of ferromagnetic bits are highly pursued for the aim of high integration and low energy consumption in modern information technology. Methods based on the spin-orbit torque switching in heavy metal/ferromagnet structures have been proposed with magnetic field, and recently are heading toward deterministic switching without external magnetic field. Here we demonstrate that an in-plane effective magnetic field can be induced by an electric field without breaking the symmetry of the structure of the thin film, and realize the deterministic magnetization switching in a hybrid ferromagnetic/ferroelectric structure with Pt/Co/Ni/Co/Pt layers on PMN-PT substrate. The effective magnetic field can be reversed by changing the direction of the applied electric field on the PMN-PT substrate, which fully replaces the controllability function of the external magnetic field. The electric field is found to generate an additional spin-orbit torque on the CoNiCo magnets, which is confirmed by macrospin calculations.

cond-mat.mtrl-sci↗

arXiv2015

Spin-orbit torque in Pt/CoNiCo/Pt symmetric devices

Current induced magnetization switching by spin-orbit torques offers an energy-efficient means of writing information in heavy metal/ferromagnet (FM) multilayer systems. The relative contributions of field-like torques and damping-like torques to the magnetization switching induced by the electrical current are still under debate. Here, we describe a device based on a symmetric Pt/FM/Pt structure, in which we demonstrate a strong damping-like torque from the spin Hall effect and unmeasurable field-like torque from Rashba effect. The spin-orbit effective fields due to the spin Hall effect were investigated quantitatively and were found to be consistent with the switching effective fields after accounting for the switching current reduction due to thermal fluctuations from the current pulse. A non-linear dependence of deterministic switching of average Mz on the in-plane magnetic field was revealed, which could be explained and understood by micromagnetic simulation.

cond-mat.mes-hall↗