arXiv subjects

Yue Xiao

Publications and source records attributed to Yue Xiao.

At least 73 records · Page 4Linked to original sources

arXiv2022

Design of Reconfigurable Intelligent Surface-Aided Cross-Media Communications

A novel reconfigurable intelligent surface (RIS)-aided hybrid reflection/transmitter design is proposed for achieving information exchange in cross-media communications. In pursuit of the balance between energy efficiency and low-cost implementations, the cloud-management transmission protocol is adopted in the integrated multi-media system. Specifically, the messages of devices using heterogeneous propagation media, are firstly transmitted to the medium-matched AP, with the aid of the RIS-based dual-hop transmission. After the operation of intermediate frequency conversion, the access point (AP) uploads the received signals to the cloud for further demodulating and decoding process. Based on time division multiple access (TDMA), the cloud is able to distinguish the downlink data transmitted to different devices and transforms them into the input of the RIS controller via the dedicated control channel. Thereby, the RIS can passively reflect the incident carrier back into the original receiver with the exchanged information during the preallocated slots, following the idea of an index modulation-based transmitter. Moreover, the iterative optimization algorithm is utilized for optimizing the RIS phase, transmit rate and time allocation jointly in the delay-constrained cross-media communication model. Our simulation results demonstrate that the proposed RIS-based scheme can improve the end-to-end throughput than that of the AP-based transmission, the equal time allocation, the random and the discrete phase adjustment benchmarks.

eess.SP↗

arXiv2022

Pricing for Reconfigurable Intelligent Surface Aided Wireless Networks: Models and Principles

Owing to the recent advancements of meta-materials and meta-surfaces, the concept of reconfigurable intelligent surface (RIS) has been embraced to meet the spectral- and energy-efficient, and yet cost-effective solutions for the sixth-generation (6G) wireless networks. From an operational standpoint, RISs can be easily deployed on the facades of buildings and indoor walls. Albeit promising, in the actual network operation, the deployment of RISs may face challenges because of the willingness and benefits of RIS holders from the aspect of installing RISs on their properties. Accordingly, RIS-aided wireless networks are faced with a formidable mission: how to balance the wireless service providers (WSPs) and RIS holders in terms of their respective interests. To alleviate this deadlock, we focus on the application of pricing models in RIS-aided wireless networks in pursuit of a win-win solution for both sides. Specifically, we commence with a comprehensive introduction of RIS pricing with its potential applications in RIS networks, meanwhile the fundamentals of pricing models are summarized in order to benefit both RIS holders and WSPs. In addition, a Stackelberg game-based model is exemplified to illustrate the operation of utility-maximization pricing. Finally, we highlight open issues and future research directions of applying pricing models to the RIS-aided wireless networks.

eess.SY↗

arXiv2022

Multi-Resource Allocation for On-Device Distributed Federated Learning Systems

This work poses a distributed multi-resource allocation scheme for minimizing the weighted sum of latency and energy consumption in the on-device distributed federated learning (FL) system. Each mobile device in the system engages the model training process within the specified area and allocates its computation and communication resources for deriving and uploading parameters, respectively, to minimize the objective of system subject to the computation/communication budget and a target latency requirement. In particular, mobile devices are connect via wireless TCP/IP architectures. Exploiting the optimization problem structure, the problem can be decomposed to two convex sub-problems. Drawing on the Lagrangian dual and harmony search techniques, we characterize the global optimal solution by the closed-form solutions to all sub-problems, which give qualitative insights to multi-resource tradeoff. Numerical simulations are used to validate the analysis and assess the performance of the proposed algorithm.

eess.SY↗

arXiv2022

Secure and Efficient Multi-Signature Schemes for Fabric: An Enterprise Blockchain Platform

Digital signature is a major component of transactions on Blockchain platforms, especially in enterprise Blockchain platforms, where multiple signatures from a set of peers need to be produced to endorse a transaction. However, such process is often complex and time-consuming. Multi-signature, which can improve transaction efficiency by having a set of signers cooperate to produce a joint signature, has attracted extensive attentions. In this work, we propose two multi-signature schemes, GMS and AGMS, which are proved to be more secure and efficient than state-of-the-art multi-signature schemes. Besides, we implement the proposed schemes in a real Enterprise Blockchain platform, Fabric. Experiment results show that the proposed AGMS scheme helps achieve the goal of high transaction efficiency, low storage complexity, as well as high robustness against rogue-key attacks and k-sum problem attacks.

cs.CR↗

arXiv2022

Lalaine: Measuring and Characterizing Non-Compliance of Apple Privacy Labels at Scale

As a key supplement to privacy policies that are known to be lengthy and difficult to read, Apple has launched the app privacy labels, which purportedly help users more easily understand an app's privacy practices. However, false and misleading privacy labels can dupe privacy-conscious consumers into downloading data-intensive apps, ultimately eroding the credibility and integrity of the labels. Although Apple releases requirements and guidelines for app developers to create privacy labels, little is known about whether and to what extent the privacy labels in the wild are correct and compliant, reflecting the actual data practices of iOS apps. This paper presents the first systematic study, based on our new methodology named Lalaine, to evaluate data-flow to privacy-label (flow-to-label) consistency. Lalaine analyzed the privacy labels and binaries of 5,102 iOS apps, shedding light on the prevalence and seriousness of privacy-label non-compliance. We provide detailed case studies and analyze root causes for privacy label non-compliance that complements prior understandings. This has led to new insights for improving privacy-label design and compliance requirements, so app developers, platform stakeholders, and policy-makers can better achieve their privacy and accountability goals. Lalaine is thoroughly evaluated for its high effectiveness and efficiency. We are responsibly reporting the results to stakeholders.

cs.CR↗

arXiv2022

Learning Efficient Representations for Enhanced Object Detection on Large-scene SAR Images

It is a challenging problem to detect and recognize targets on complex large-scene Synthetic Aperture Radar (SAR) images. Recently developed deep learning algorithms can automatically learn the intrinsic features of SAR images, but still have much room for improvement on large-scene SAR images with limited data. In this paper, based on learning representations and multi-scale features of SAR images, we propose an efficient and robust deep learning based target detection method. Especially, by leveraging the effectiveness of adversarial autoencoder (AAE) which influences the distribution of the investigated data explicitly, the raw SAR dataset is augmented into an enhanced version with a large quantity and diversity. Besides, an auto-labeling scheme is proposed to improve labeling efficiency. Finally, with jointly training small target chips and large-scene images, an integrated YOLO network combining non-maximum suppression on sub-images is used to realize multiple targets detection of high resolution images. The numerical experimental results on the MSTAR dataset show that our method can realize target detection and recognition on large-scene images accurately and efficiently. The superior anti-noise performance is also confirmed by experiments.

cs.CV↗

arXiv2021

The Truth about Power Laws: Theory and Reality

Consensus about the universality of the power law feature in complex networks is experiencing profound challenges. To shine fresh light on this controversy, we propose a generic theoretical framework in order to examine the power law property. First, we study a class of birth-and-death networks that is ubiquitous in the real world, and calculate its degree distributions. Our results show that the tails of its degree distributions exhibits a distinct power law feature, providing robust theoretical support for the ubiquity of the power law feature. Second, we suggest that in the real world two important factors, network size and node disappearance probability, point to the existence of the power law feature in the observed networks. As network size reduces, or as the probability of node disappearance increases, then the power law feature becomes increasingly difficult to observe. Finally, we suggest that an effective way of detecting the power law property is to observe the asymptotic (limiting) behaviour of the degree distribution within its effective intervals.

physics.soc-ph↗

arXiv2020

Propagation mechanism of localized wave packet in plane-Poiseuille flow

The convection velocity of localized wave packet in plane-Poiseuille flow is found to be determined by a solitary wave at the centerline of a downstream vortex dipole in its mean field after deducting the basic flow. The fluctuation component following the vortex dipole oscillates with a global frequency selected by the upstream marginal absolute instability, and propagates obeying the local dispersion relation of the mean flow. By applying localized initial disturbances, a nonzero wave-packet density is achieved at the threshold state, suggesting a first order transition.

physics.flu-dyn↗

arXiv2020

Resource Allocation for Intelligent Reflecting Surface Aided Cooperative Communications

This paper investigates an intelligent reflecting surface (IRS) aided cooperative communication network, where the IRS exploits large reflecting elements to proactively steer the incident radio-frequency wave towards destination terminals (DTs). As the number of reflecting elements increases, the reflection resource allocation (RRA) will become urgently needed in this context, which is due to the non-ignorable energy consumption. The goal of this paper, therefore, is to realize the RRA besides the active-passive beamforming design, where RRA is based on the introduced modular IRS architecture. The modular IRS consists with multiple modules, each of which has multiple reflecting elements and is equipped with a smart controller, all the controllers can communicate with each other in a point-to-point fashion via fiber links. Consequently, an optimization problem is formulated to maximize the minimum SINR at DTs, subject to the module size constraint and both individual source terminal (ST) transmit power and the reflecting coefficients constraints. Whereas this problem is NP-hard due to the module size constraint, we develop an approximate solution by introducing the mixed row block $\ell_{1,F}$-norm to transform it into a suitable semidefinite relaxation. Finally, numerical results demonstrate the meaningfulness of the introduced modular IRS architecture.

eess.SP↗

arXiv2020

A Stackelberg Game Approach to Resource Allocation for IRS-aided Communications

It is known that the capacity of the intelligent reflecting surface (IRS) aided cellular network can be effectively improved by reflecting the incident signals from the transmitter in a low-cost passive reflecting way. Nevertheless, in the actual network operation, the base station (BS) and IRS may belong to different operators, consequently, the IRS is reluctant to help the BS without any payment. Therefore, this paper investigates price-based reflection resource (elements) allocation strategies for an IRS-aided multiuser multiple-input and single-output (MISO) downlink communication systems, in which all transmissions over the same frequency band. Assuming that the IRS is composed with multiple modules, each of which is attached with a smart controller, thus, the states (active/idle) of module can be operated by its controller, and all controllers can be communicated with each other via fiber links. A Stackelberg game-based alternating direction method of multipliers (ADMM) is proposed to jointly optimize the transmit beamforming at the BS and the passive beamforming of the active modules. Numerical examples are presented to verify the proposed algorithm. It is shown that the proposed scheme is effective in the utilities of both the BS and IRS.

cs.IT↗

arXiv2020

Performance Analysis of Low-Interference N-Continuous OFDM

The low-interference N-continuous orthogonal frequency division multiplexing (NC-OFDM) system [25], [26] is investigated in terms of power spectrum density (PSD) and bit error rate (BER), to prove and quantify its advantages over traditional NC-OFDM. The PSD and BER performances of the low-interference scheme are analyzed and compared under the parameters of the highest derivative order (HDO) and the length of the smooth signal. In the context of PSD, different from one discontinuous point per NC-OFDM symbol in [25], the sidelobe suppression performance is evaluated upon considering two discontinuous points due to the finite continuity of the smooth signal and its higher-order derivatives. It was shown that with an increased HDO and an increased length of the smooth signal, a more rapid sidelobe decaying is achieved, for the significant continuity improvement of the OFDM signal and its higher-order derivatives. However, our PSD analysis also shows that if the length of the smooth signal is set inappropriately, the performance may be degraded, even if the HDO is large. Furthermore, it was shown in the error performance analysis that under the assumptions of perfect and imperfect synchronization, the low-interference scheme incurs small BER performance degradation for a short length of the smooth signal or a small HDO as opposed to conventional NC-OFDM. Based on analysis and simulation results, the trade-offs between sidelobe suppression and BER are studied with the above two parameters.

cs.IT↗

arXiv2020

Reflection Resource Management for Intelligent Reflecting Surface Aided Wireless Networks

In this paper, the adoption of an intelligent reflecting surface (IRS) for multiple single-antenna source terminal (ST)-DT pairs in two-hop networks is investigated. Different from the previous studies on IRS that merely focused on tuning the reflection coefficient of all the reflection elements at IRS, in this paper, we consider the true reflection resource management. Specifically, the true reflection resource management can be realized via trigger module selection based on our proposed IRS architecture that all the reflection elements are partially controlled by multiple parallel switches of controller. As the number of reflection elements increases, the true reflection resource management will become urgently needed in this context, which is due to the non-ignorable energy consumption. Moreover, the proposed modular architecture of IRS is designed to make the reflection elements part independent and controllable. As such, our goal is to maximize the minimum signal-to-interference-plus-noise ratio (SINR) at DTs via a joint trigger module subset selection, transmit power allocation of STs, and the corresponding passive beamforming of the trigger modules, subject to per ST power budgets and module size constraint. Whereas this problem is NP-hard due to the module size constraint, to deal with it, we transform the hard module size constraint into the group sparse constraint by introducing the mixed row block norm, which yields a suitable semidefinite relaxation. Additionally, the parallel alternating direction method of multipliers (PADMM) is proposed to identify the trigger module subset, and then subsequently the transmit power allocation and passive beamforming can be obtained by solving the original minimum SINR maximization problem without the group sparse constraint via partial linearization for generalized fractional programs.

cs.IT↗

arXiv2020

Fully Decentralized Federated Learning Based Beamforming Design for UAV Communications

To handle the data explosion in the era of internet of things (IoT), it is of interest to investigate the decentralized network, with the aim at relaxing the burden to central server along with keeping data privacy. In this work, we develop a fully decentralized federated learning (FL) framework with an inexact stochastic parallel random walk alternating direction method of multipliers (ISPW-ADMM). Performing more communication efficient and enhanced privacy preservation compared with the current state-of-the-art, the proposed ISPW-ADMM can be partially immune to the impacts from time-varying dynamic network and stochastic data collection, while still in fast convergence. Benefits from the stochastic gradients and biased first-order moment estimation, the proposed framework can be applied to any decentralized FL tasks over time-varying graphs. Thus to further demonstrate the practicability of such framework in providing fast convergence, high communication efficiency, and system robustness, we study the extreme learning machine(ELM)-based FL model for robust beamforming (BF) design in UAV communications, as verified by the numerical simulations.

eess.SP↗

arXiv2020

A Stackelberg Game Approach to Resource Allocation for Intelligent Reflecting Surface Aided Communications

It is known that the capacity of the intelligent reflecting surface (IRS) aided cellular network can be effectively improved by reflecting the incident signals from the transmitter in a low-cost passive reflecting way. In this paper, we study the adoption of an IRS for downlink multi-user communication from a multi-antenna base station (BS). Nevertheless, in the actual network operation, the IRS operator can be selfish or have its own objectives due to competing/limited resources as well as deployment/maintenance cost. Therefore, in this paper, we develop a Stackelbeg game model to analyze the interaction between the BS and the IRS operator. Specifically, different from the existing studies on IRS that merely focus on tuning the reflection coefficient of all the reflection elements, we consider the reflection resource (elements) management, which can be realized via trigger module selection under our proposed IRS architecture that all the reflection elements are partially controlled by independent switches of controller. A Stackelberg game-based alternating direction method of multipliers (ADMM) is proposed to jointly optimize the transmit beamforming at the BS and the passive beamforming of the triggered reflection modules. Numerical examples are presented to verify the proposed studies. It is shown that the proposed scheme is effective in the utilities of both the BS and IRS.

eess.SP↗

arXiv2020

Reconfigurable Intelligent Surface for MISO Systems with Proportional Rate Constraints

This paper investigates the system spectral efficiency (SE) in reconfigurable intelligent surface (RIS)-aided multiuser multiple-input single-output (MISO) systems, where RIS can reconfigure the propagation environment via a large number of controllable and intelligent phase shifters. In order to explore the system SE performance behavior with user proportional fairness for such a system, an optimization problem is formulated to maximize the SE by jointly considering the power allocation at the base station (BS) and phase shift at the RIS, under nonlinear proportional rate fairness constraints. To solve the nonconvex optimization problem, an effective solution is developed, which capitalizes on an iterative algorithm with closed-form expressions, i.e., alternatively optimizing the transmit power at the BS and the reflecting phase shift at the RIS. Numerical simulations are provided to validate the theoretical analysis and assess the performance of the proposed alternative algorithm.

cs.IT↗

arXiv2020

Two-Step Modification of Phonon Mean Free Paths for Thermal Conductivity Predictions of Thin-Film-Based Nanostructures

As one simple metamaterial, nanopatterns are often fabricated across a thin film so that the thermal transport can be manipulated. The etched sidewalls for these nanostructures are usually rough due to surface defects introduced during the nanofabrication, whereas the top and bottom film surfaces are smoother. In existing analytical models, the contrast between these surfaces has not been addressed and all boundaries are assumed to be diffusive for phonon reflection. In this paper, a new two-step approach to address this issue is proposed for phonon transport modeling of general thin-film-based structures. In this approach, the effective in-plane phonon mean free paths (Λ_Film) are first modified from the bulk phonon MFPs to account for the influence of the top/bottom film surfaces, with possibly enhanced probability of specular phonon reflection at cryogenic temperatures. This Λ_Film is further modified to include the scattering by etched sidewalls with almost completely diffusive phonon scattering. Such a two-step phonon mean free path modification yields almost identical results as frequency-dependent phonon Monte Carlo simulations for etched nanowires and representative nanoporous thin films. This simple yet accurate analytical model can be applied to general thin-film-based nanostructures to combine the phonon size effects along orthogonal directions.

physics.app-ph↗

arXiv2019

Phonon Transport within Periodic Porous Structures -- From Classical Phonon Size Effects to Wave Effects

Tailoring thermal properties with nanostructured materials can be of vital importance for many applications. Generally classical phonon size effects are employed to reduce the thermal conductivity, where strong phonon scattering by nanostructured interfaces or boundaries can dramatically supress the heat conduction. When these boundaries or interfaces are arranged in a periodic pattern, coherent phonons may have interference and modify the phonon dispersion, leading to dramatically reduced thermal conductivity. Such coherent phonon transport has been widely studied for superlattice films and recently emphasized for periodic nanoporous patterns. Although the wave effects have been proposed for reducing the thermal conductivity, more recent experimental evidence shows that such effects can only be critical at an ultralow temperature, i.e., around 10 K or below. At room temperature, the impacted phonons are mostly restricted to hypersonic modes that contribute little to the thermal conductivity. In this review, the theoretical and experimental studies of periodic porous structures are summarized and compared. The general applications of periodic nanostructured materials are further discussed.

physics.app-ph↗

arXiv2019

Determining Phonon Mean Free Path Spectrum by Ballistic Phonon Resistance within a Nanoslot-Patterned Thin Film

At micro- to nano-scales, classical size effects in heat conduction play an important role in suppressing the thermal transport process. Such effects occur when the characteristic lengths become commensurate to the mean free paths (MFPs) of heat carriers that are mainly phonons for nonmetallic crystals. Beyond existing experimental efforts on thin films using laser-induced thermal gratings, this work provides the complete theoretical analysis for a new approach to extract the effective phonon MFP distribution for the in-plane heat conduction within a thin film or flake-like sample. In this approach, nanoslots are patterned on a suspended thin film. Phonons will transport ballistically through the neck region between adjacent nanoslots if the phonon MFPs are much longer than the neck width. The associated "ballistic thermal resistance" for varied neck dimensions can then be used to reconstruct the phonon MFP distribution within the film. The technique can be further extended to two-dimensional materials when the relaxation time approximation is reasonably accurate.

physics.app-ph↗