Searcharxiv⌕ Search

arXiv subjects

Yunfei Chen

Publications and source records attributed to Yunfei Chen.

At least 55 records · Page 3Linked to original sources

Knowledge Distillation Based Semantic Communications For Multiple Users

Deep learning (DL) has shown great potential in revolutionizing the traditional communications system. Many applications in communications have adopted DL techniques due to their powerful representation ability. However, the learning-based methods can be dependent on the training dataset and perform worse on unseen interference due to limited model generalizability and complexity. In this paper, we consider the semantic communication (SemCom) system with multiple users, where there is a limited number of training samples and unexpected interference. To improve the model generalization ability and reduce the model size, we propose a knowledge distillation (KD) based system where Transformer based encoder-decoder is implemented as the semantic encoder-decoder and fully connected neural networks are implemented as the channel encoder-decoder. Specifically, four types of knowledge transfer and model compression are analyzed. Important system and model parameters are considered, including the level of noise and interference, the number of interfering users and the size of the encoder and decoder. Numerical results demonstrate that KD significantly improves the robustness and the generalization ability when applied to unexpected interference, and it reduces the performance loss when compressing the model size.

eess.SP↗

Cooperative Perception with Learning-Based V2V communications

Cooperative perception has been widely used in autonomous driving to alleviate the inherent limitation of single automated vehicle perception. To enable cooperation, vehicle-to-vehicle (V2V) communication plays an indispensable role. This work analyzes the performance of cooperative perception accounting for communications channel impairments. Different fusion methods and channel impairments are evaluated. A new late fusion scheme is proposed to leverage the robustness of intermediate features. In order to compress the data size incurred by cooperation, a convolution neural network-based autoencoder is adopted. Numerical results demonstrate that intermediate fusion is more robust to channel impairments than early fusion and late fusion, when the SNR is greater than 0 dB. Also, the proposed fusion scheme outperforms the conventional late fusion using detection outputs, and autoencoder provides a good compromise between detection accuracy and bandwidth usage.

eess.SP↗

Communication-Efficient Design for Quantized Decentralized Federated Learning

Decentralized federated learning (DFL) is a variant of federated learning, where edge nodes only communicate with their one-hop neighbors to learn the optimal model. However, as information exchange is restricted in a range of one-hop in DFL, inefficient information exchange leads to more communication rounds to reach the targeted training loss. This greatly reduces the communication efficiency. In this paper, we propose a new non-uniform quantization of model parameters to improve DFL convergence. Specifically, we apply the Lloyd-Max algorithm to DFL (LM-DFL) first to minimize the quantization distortion by adjusting the quantization levels adaptively. Convergence guarantee of LM-DFL is established without convex loss assumption. Based on LM-DFL, we then propose a new doubly-adaptive DFL, which jointly considers the ascending number of quantization levels to reduce the amount of communicated information in the training and adapts the quantization levels for non-uniform gradient distributions. Experiment results based on MNIST and CIFAR-10 datasets illustrate the superiority of LM-DFL with the optimal quantized distortion and show that doubly-adaptive DFL can greatly improve communication efficiency.

cs.DC↗

Satellite-MEC Integration for 6G Internet of Things: Minimal Structures, Advances, and Prospects

The sixth-generation (6G) network is envisioned to shift its focus from the service requirements of human beings' to those of Internet-of-Things (IoT) devices'. Satellite communications are indispensable in 6G to support IoT devices operating in rural or disastrous areas. However, satellite networks face the inherent challenges of low data rate and large latency, which may not support computation-intensive and delay-sensitive IoT applications. Mobile Edge Computing (MEC) is a burgeoning paradigm by extending cloud computing capabilities to the network edge. By utilizing MEC technologies, the resource-limited IoT devices can access abundant computation resources with low latency, which enables the highly demanding applications while meeting strict delay requirements. Therefore, an integration of satellite communications and MEC technologies is necessary to better enable 6G IoT. In this survey, we provide a holistic overview of satellite-MEC integration. We first discuss the main challenges of the integrated satellite-MEC network and propose three minimal integrating structures. For each minimal structure, we summarize the current advances in terms of their research topics, after which we discuss the lessons learned and future directions of the minimal structure. Finally, we outline potential research issues to envision a more intelligent, more secure, and greener integrated satellite-MEC network.

cs.NI↗

Cramér-Rao Bounds of Near-Field Positioning Based on Electromagnetic Propagation Model

The adoption of large-scale antenna arrays at high-frequency bands is widely envisioned in the beyond 5G wireless networks. This leads to the near-field regime where the wavefront is no longer planar but spherical, bringing new opportunities and challenges for communications and positioning. In this paper, we improve the near-field positioning technology from the classical spherical wavefront model (SWM) to the more accurate and true electromagnetic propagation model (EPM). A generic near-field positioning model with different observation capabilities for three electric field types (vector, scalar, and overall scalar electric field) is developed based on the complete EPM. For these three observed electric field types, the Cramér-Rao bound (CRB) is adopted to evaluate the achievable estimation accuracy. The expressions of the CRBs for different electric field observations are derived by combining electromagnetic propagation concepts with estimation theory. Closed-form expressions can be further obtained as the terminal is assumed to be on the central perpendicular line (CPL) of the receiving antenna surface. Moreover, the above discussions are extended to the system with multiple receiving antennas. In this case, the CRBs using various electric field types are derived, and the effect of different numbers of receiving antennas is deeply investigated. Numerical results are provided to quantify the CRBs and validate the analytical results. Also, the impact of different system parameters, including electric field type, wavelength, size of the receiving antenna, and number of antennas, is evaluated.

eess.SP↗

Coexistence Designs of Radar and Communication Systems in a Multi-path Scenario

The focus of this study is on the spectrum sharing between multiple-input multiple-output (MIMO) communications and co-located MIMO radar systems in multi-path environments. The major challenge is to suppress the mutual interference between the two systems while combining the useful multi-path components received at each system. We tackle this challenge by jointly designing the communication precoder, radar transmit waveform and receive filter. Specifically, the signal-to-interference-plus-noise ratio (SINR) at the radar receiver is maximized subject to constraints on the radar waveform, communication rate and transmit power. The multi-path propagation complicates the expressions of the radar SINR and communication rate, leading to a non-convex problem. To solve it, a sub-optimal algorithm based on the alternating maximization is used to optimize the precoder, radar transmit waveform and receive filter iteratively. Simulation results are provided to demonstrate the effectiveness of the proposed design.

cs.IT↗

Joint Mobility Control and MEC Offloading for Hybrid Satellite-Terrestrial-Network-Enabled Robots

Benefiting from the fusion of communication and intelligent technologies, network-enabled robots have become important to support future machine-assisted and unmanned applications. To provide high-quality services for robots in wide areas, hybrid satellite-terrestrial networks are a key technology. Through hybrid networks, computation-intensive and latency-sensitive tasks can be offloaded to mobile edge computing (MEC) servers. However, due to the mobility of mobile robots and unreliable wireless network environments, excessive local computations and frequent service migrations may significantly increase the service delay. To address this issue, this paper aims to minimize the average task completion time for MEC-based offloading initiated by satellite-terrestrial-network-enabled robots. Different from conventional mobility-aware schemes, the proposed scheme makes the offloading decision by jointly considering the mobility control of robots. A joint optimization problem of task offloading and velocity control is formulated. Using Lyapunov optimization, the original optimization is decomposed into a velocity control subproblem and a task offloading subproblem. Then, based on the Markov decision process (MDP), a dual-agent reinforcement learning (RL) algorithm is proposed. The convergence and complexity of the improved RL algorithm are theoretically analyzed, and the simulation results show that the proposed scheme can effectively reduce the offloading delay.

cs.IT↗

On the Road to 6G: Visions, Requirements, Key Technologies and Testbeds

Fifth generation (5G) mobile communication systems have entered the stage of commercial development, providing users with new services and improved user experiences as well as offering a host of novel opportunities to various industries. However, 5G still faces many challenges. To address these challenges, international industrial, academic, and standards organizations have commenced research on sixth generation (6G) wireless communication systems. A series of white papers and survey papers have been published, which aim to define 6G in terms of requirements, application scenarios, key technologies, etc. Although ITU-R has been working on the 6G vision and it is expected to reach a consensus on what 6G will be by mid-2023, the related global discussions are still wide open and the existing literature has identified numerous open issues. This paper first provides a comprehensive portrayal of the 6G vision, technical requirements, and application scenarios, covering the current common understanding of 6G. Then, a critical appraisal of the 6G network architecture and key technologies is presented. Furthermore, existing testbeds and advanced 6G verification platforms are detailed for the first time. In addition, future research directions and open challenges are identified for stimulating the on-going global debate. Finally, lessons learned to date concerning 6G networks are discussed.

eess.SP↗

Joint Communication and Sensing: Models and Potential of Using MIMO

The sixth-generation (6G) network is envisioned to integrate communication and sensing functions, so as to improve the spectrum efficiency (SE) and support explosive novel applications. Although the similarities of wireless communication and radio sensing lay the foundation for their combination, there is still considerable incompatible interest between them. To simultaneously guarantee the communication capacity and the sensing accuracy, the multiple-input and multiple-output (MIMO) technique plays an important role due to its unique capability of spatial beamforming and waveform shaping. However, the configuration of MIMO also brings high hardware cost, high power consumption, and high signal processing complexity. How to efficiently apply MIMO to achieve balanced communication and sensing performance is still open. In this survey, we discuss joint communication and sensing (JCAS) in the context of MIMO. We first outline the roles of MIMO in the process of wireless communication and radar sensing. Then, we present current advances in both communication and sensing coexistence and integration in detail. Three novel JCAS MIMO models are subsequently discussed by combining cutting-edge technologies, i.e., cloud random access networks (C-RANs), unmanned aerial vehicles (UAVs) and reconfigurable intelligent surfaces (RISs). Examined from the practical perspective, the potential and challenges of MIMO in JCAS are summarized, and promising solutions are provided. Motivated by the great potential of the Internet of Things (IoT), we also specify JCAS in IoT scenarios and discuss the uniqueness of applying JCAS to IoT. In the end, open issues are outlined to envisage a ubiquitous, intelligent and secure JCAS network in the near future.

eess.SP↗

Hierarchical-Absolute Reciprocity Calibration for Millimeter-wave Hybrid Beamforming Systems

In time-division duplexing (TDD) millimeter-wave (mmWave) massive multiple-input multiple-output (MIMO) systems, the reciprocity mismatch severely degrades the performance of the hybrid beamforming (HBF). In this work, to mitigate the detrimental effect of the reciprocity mismatch, we investigate reciprocity calibration for the mmWave-HBF system with a fully-connected phase shifter network. To reduce the overhead and computational complexity of reciprocity calibration, we first decouple digital radio frequency (RF) chains and analog RF chains with beamforming design. Then, the entire calibration problem of the HBF system is equivalently decomposed into two subproblems corresponding to the digital-chain calibration and analog-chain calibration. To solve the calibration problems efficiently, a closed-form solution to the digital-chain calibration problem is derived, while an iterative-alternating optimization algorithm for the analog-chain calibration problem is proposed. To measure the performance of the proposed algorithm, we derive the Cramér-Rao lower bound on the errors in estimating mismatch coefficients. The results reveal that the estimation errors of mismatch coefficients of digital and analog chains are uncorrelated, and that the mismatch coefficients of receive digital chains can be estimated perfectly. Simulation results are presented to validate the analytical results and to show the performance of the proposed calibration approach.

eess.SP↗

On Secure Uplink Transmission in Hybrid RF-FSO Cooperative Satellite-Aerial-Terrestrial Networks

This work investigates the secrecy outage performance of the uplink transmission of a radio-frequency (RF)-free-space optical (FSO) hybrid cooperative satellite-aerial-terrestrial network (SATN). Specifically, in the considered cooperative SATN, a terrestrial source (S) transmits its information to a satellite receiver (D) via the help of a cache-enabled aerial relay (R) terminal with the most popular content caching scheme, while a group of eavesdropping aerial terminals (Eves) trying to overhear the transmitted confidential information. Moreover, RF and FSO transmissions are employed over S-R and R-D links, respectively. Considering the randomness of R, D, and Eves, and employing a stochastic geometry framework, the secrecy outage performance of the cooperative uplink transmission in the considered SATN is investigated and a closed-form analytical expression for the end-to-end secrecy outage probability is derived. Finally, Monte-Carlo simulations are shown to verify the accuracy of our analysis.

eess.SP↗

Surface-specific vibrational spectroscopy of interfacial water reveals large pH change near graphene electrode at low current densities

Molecular-level insight into interfacial water at buried electrode interfaces is essential in elucidating many phenomena of electrochemistry, but spectroscopic probing of the buried interfaces remains challenging. Here, using surface-specific vibrational spectroscopy, we probe and identify the interfacial water orientation and interfacial electric field at the calcium fluoride (CaF2)-supported electrified graphene/water interface under applied potentials. Our data shows that the water orientation changes drastically at negative potentials (<-0.03 V vs. Pd/H2), from O-H group pointing down towards bulk solution to pointing up away from the bulk solution, which arises from charging/discharging not of the graphene but of the CaF2 substrate. The potential-dependent spectra are nearly identical to the pH-dependent spectra, evidencing that the applied potentials change the local pH (more than five pH units) near the graphene electrode even at a current density below 1 microamp per square centimeter. Our work provides molecular-level insights into the dissociation and reorganization of interfacial water on an electrode/electrolyte interface.

physics.chem-ph↗

Integrating Satellites and Mobile Edge Computing for 6G Wide-Area Edge Intelligence: Minimal Structures and Systematic Thinking

The sixth-generation (6G) network will shift its focus to supporting everything including various machine-type devices (MTDs) in an everyone-centric manner. To ubiquitously cover the MTDs working in rural and disastrous areas, satellite communications become indispensable, while mobile edge computing (MEC) also plays an increasingly crucial role. Their sophisticated integration enables wide-area edge intelligence which promises to facilitate globally-distributed customized services. In this article, we present typical use cases of integrated satellite-MEC networks and discuss the main challenges therein. Inspired by the protein structure and the systematic engineering methodology, we propose three minimal integrating structures, based on which a complex integrated satellite-MEC network can be treated as their extension and combination. We discuss the unique characteristics and key problems of each minimal structure. Accordingly, we establish an on-demand network orchestration framework to enrich the hierarchy of network management, which further leads to a process-oriented network optimization method. On that basis, a case study is utilized to showcase the benefits of on-demand network orchestration and process-oriented network optimization. Finally, we outline potential research issues to envision a more intelligent, more secure, and greener integrated network.

eess.SY↗

Effect of Strong Time-Varying Transmission Distance on LEO Satellite-Terrestrial Deliveries

In this paper, we investigate the effect of the strong time-varying transmission distance on the performance of the low-earth orbit (LEO) satellite-terrestrial transmission (STT) system. We propose a new analytical framework using finite-state Markov channel (FSMC) model and time discretization method. Moreover, to demonstrate the applications of the proposed framework, the performances of two adaptive transmissions, rate-adaptive transmission (RAT) and power-adaptive transmission (PAT) schemes, are evaluated for the cases when the transmit power or the transmission rate at the LEO satellite is fixed. Closed-form expressions for the throughput, energy efficiency (EE), and delay outage rate (DOR) of the considered systems are derived and verified, which are capable of addressing the capacity, energy efficiency, and outage rate performance of the considered LEO STT scenarios with the proposed analytical framework.

eess.SP↗

On-Demand Networking for Ubiquitous Connectivity and Network Resilience: A Network-in-a-Box Solution

Recently, the wireless community has initiated research on the sixth generation (6G) cellular network for the next decade. The 6G visions are still under development but are converging toward ubiquitous, sustainable, and automated digital society. A network-in-a-box (NIB) is a portable and fully-fledged networking solution that has many potentials to stimulate 6G visions, especially for ubiquitous and resilient network connectivity. In this article, we highlight how NIB features suit 6G use cases and requirements and how it can be used for 6G communications. In addition, we discuss the challenges of the potential enabling technologies of 6G that can reinforce the NIB performance.

cs.NI↗

NOMA-Based Hybrid Satellite-UAV-Terrestrial Networks for Beyond 5G Maritime Internet of Things

Current fifth-generation (5G) networks do not cover maritime areas, causing difficulties in developing maritime Internet of Things (IoT). To tackle this problem, we establish a nearshore network by collaboratively using on-shore terrestrial base stations (TBSs) and tethered unmanned aerial vehicles (UAVs). These TBSs and UAVs form virtual clusters in a user-centric manner. Within each virtual cluster, non-orthogonal multiple access (NOMA) is adopted for agilely including various maritime IoT devices, which are usually sparsely distributed on the vast ocean. The nearshore network also shares spectrum with marine satellites. In such a NOMA-based hybrid satellite-UAV-terrestrial network, interference among different network segments, different clusters, as well as different users occurs. We thereby formulate a joint power allocation problem to maximize the sum rate of the network. Different from existing studies, we use large-scale channel state information (CSI) only for optimization to reduce system overhead. The large-scale CSI is obtained by using the position information of maritime IoT devices. The problem is non-convex with intractable non-linear constraints. We tackle these difficulties by adopting the max-min optimization, auxiliary function method, and successive convex approximation technique. An iterative power allocation algorithm is accordingly proposed, which is shown effective for coverage enhancement by simulations. This shows the potential of NOMA-based hybrid satellite-UAV-terrestrial networks for maritime on-demand coverage.

cs.IT↗

5G Embraces Satellites for 6G Ubiquitous IoT: Basic Models for Integrated Satellite Terrestrial Networks

Terrestrial communication networks mainly focus on users in urban areas but have poor coverage performance in harsh environments, such as mountains, deserts, and oceans. Satellites can be exploited to extend the coverage of terrestrial fifth-generation (5G) networks. However, satellites are restricted by their high latency and relatively low data rate. Consequently, the integration of terrestrial and satellite components has been widely studied, to take advantage of both sides and enable seamless broadband coverage. Due to the significant differences between satellite communications (SatComs) and terrestrial communications (TerComs) in terms of channel fading, transmission delay, mobility, and coverage performance, the establishment of an efficient hybrid satellite-terrestrial network (HSTN) still faces many challenges. In general, it is difficult to decompose a HSTN into a sum of separate satellite and terrestrial links due to the complicated coupling relationships therein. To uncover the complete picture of HSTNs, we regard the HSTN as a combination of basic cooperative models that contain the main traits of satellite-terrestrial integration but are much simpler and thus more tractable than the large-scale heterogeneous HSTNs. In particular, we present three basic cooperative models, i.e., model X, model L, and model V, and provide a survey of the state-of-the-art technologies for each of them. We discuss future research directions towards establishing a cell-free, hierarchical, decoupled HSTN. We also outline open issues to envision an agile, smart, and secure HSTN for the sixth-generation (6G) ubiquitous Internet of Things (IoT).

cs.IT↗

Hybrid Satellite-Terrestrial Communication Networks for the Maritime Internet of Things: Key Technologies, Opportunities, and Challenges

With the rapid development of marine activities, there has been an increasing number of maritime mobile terminals, as well as a growing demand for high-speed and ultra-reliable maritime communications to keep them connected. Traditionally, the maritime Internet of Things (IoT) is enabled by maritime satellites. However, satellites are seriously restricted by their high latency and relatively low data rate. As an alternative, shore & island-based base stations (BSs) can be built to extend the coverage of terrestrial networks using fourth-generation (4G), fifth-generation (5G), and beyond 5G services. Unmanned aerial vehicles can also be exploited to serve as aerial maritime BSs. Despite of all these approaches, there are still open issues for an efficient maritime communication network (MCN). For example, due to the complicated electromagnetic propagation environment, the limited geometrically available BS sites, and rigorous service demands from mission-critical applications, conventional communication and networking theories and methods should be tailored for maritime scenarios. Towards this end, we provide a survey on the demand for maritime communications, the state-of-the-art MCNs, and key technologies for enhancing transmission efficiency, extending network coverage, and provisioning maritime-specific services. Future challenges in developing an environment-aware, service-driven, and integrated satellite-air-ground MCN to be smart enough to utilize external auxiliary information, e.g., sea state and atmosphere conditions, are also discussed.

cs.NI↗