arXiv subjects

Yunlong Cai

Publications and source records attributed to Yunlong Cai.

At least 55 records · Page 3Linked to original sources

arXiv2023

Radar Sensing via OTFS Signaling

By multiplexing information symbols in the delay-Doppler (DD) domain, orthogonal time frequency space (OTFS) is a promising candidate for future wireless communication in high-mobility scenarios. In addition to the superior communication performance, OTFS is also a natural choice for radar sensing since the primary parameters (range and velocity of targets) in radar signal processing can be inferred directly from the delay and Doppler shifts. Though there are several works on OTFS radar sensing, most of them consider the integer parameter estimation only, while the delay and Doppler shifts are usually fractional in the real world. In this paper, we propose a two-step method to estimate the fractional delay and Doppler shifts. We first perform the two-dimensional (2D) correlation between the received and transmitted DD domain symbols to obtain the integer parts of the parameters. Then a difference-based method is implemented to estimate the fractional parts of delay and Doppler indices. Meanwhile, we implement a target detection method based on a generalized likelihood ratio test since the number of potential targets in the sensing scenario is usually unknown. The simulation results show that the proposed method can obtain the delay and Doppler shifts accurately and get the number of sensing targets with a high detection probability.

eess.SP↗

arXiv2023

One-shot Learning for Channel Estimation in Massive MIMO Systems

In conventional supervised deep learning based channel estimation algorithms, a large number of training samples are required for offline training. However, in practical communication systems, it is difficult to obtain channel samples for every signal-to-noise ratio (SNR). Furthermore, the generalization ability of these deep neural networks (DNN) is typically poor. In this work, we propose a one-shot self-supervised learning framework for channel estimation in multi-input multi-output (MIMO) systems. The required number of samples for offline training is small and our approach can be directly deployed to adapt to variable channels. Our framework consists of a traditional channel estimation module and a denoising module. The denoising module is designed based on the one-shot learning method Self2Self and employs Bernoulli sampling to generate training labels. Besides,we further utilize a blind spot strategy and dropout technique to avoid overfitting. Simulation results show that the performance of the proposed one-shot self-supervised learning method is very close to the supervised learning approach while obtaining improved generalization ability for different channel environments.

eess.SP↗

arXiv2023

Integrated Sensing, Computation, and Communication: System Framework and Performance Optimization

Integrated sensing, computation, and communication (ISCC) has been recently considered as a promising technique for beyond 5G systems. In ISCC systems, the competition for communication and computation resources between sensing tasks for ambient intelligence and computation tasks from mobile devices becomes an increasingly challenging issue. To address it, we first propose an efficient sensing framework with a novel action detection module. In this module, a threshold is used for detecting whether the sensing target is static and thus the overhead can be reduced. Subsequently, we mathematically analyze the sensing performance of the proposed framework and theoretically prove its effectiveness with the help of the sampling theorem. Based on sensing performance models, we formulate a sensing performance maximization problem while guaranteeing the quality-of-service (QoS) requirements of tasks. To solve it, we propose an optimal resource allocation strategy, in which the minimum resource is allocated to computation tasks, and the rest is devoted to the sensing task. Besides, a threshold selection policy is derived and the results further demonstrate the necessity of the proposed sensing framework. Finally, a real-world test of action recognition tasks based on USRP B210 is conducted to verify the sensing performance analysis. Extensive experiments demonstrate the performance improvement of our proposal by comparing it with some benchmark schemes.

cs.IT↗

arXiv2023

Rate-Adaptive Coding Mechanism for Semantic Communications With Multi-Modal Data

Recently, the ever-increasing demand for bandwidth in multi-modal communication systems requires a paradigm shift. Powered by deep learning, semantic communications are applied to multi-modal scenarios to boost communication efficiency and save communication resources. However, the existing end-to-end neural network (NN) based framework without the channel encoder/decoder is incompatible with modern digital communication systems. Moreover, most end-to-end designs are task-specific and require re-design and re-training for new tasks, which limits their applications. In this paper, we propose a distributed multi-modal semantic communication framework incorporating the conventional channel encoder/decoder. We adopt NN-based semantic encoder and decoder to extract correlated semantic information contained in different modalities, including speech, text, and image. Based on the proposed framework, we further establish a general rate-adaptive coding mechanism for various types of multi-modal semantic tasks. In particular, we utilize unequal error protection based on semantic importance, which is derived by evaluating the distortion bound of each modality. We further formulate and solve an optimization problem that aims at minimizing inference delay while maintaining inference accuracy for semantic tasks. Numerical results show that the proposed mechanism fares better than both conventional communication and existing semantic communication systems in terms of task performance, inference delay, and deployment complexity.

eess.SP↗

arXiv2023

Deep-Unfolding for Next-Generation Transceivers

The stringent performance requirements of future wireless networks, such as ultra-high data rates, extremely high reliability and low latency, are spurring worldwide studies on defining the next-generation multiple-input multiple-output (MIMO) transceivers. For the design of advanced transceivers in wireless communications, optimization approaches often leading to iterative algorithms have achieved great success for MIMO transceivers. However, these algorithms generally require a large number of iterations to converge, which entails considerable computational complexity and often requires fine-tuning of various parameters. With the development of deep learning, approximating the iterative algorithms with deep neural networks (DNNs) can significantly reduce the computational time. However, DNNs typically lead to black-box solvers, which requires amounts of data and extensive training time. To further overcome these challenges, deep-unfolding has emerged which incorporates the benefits of both deep learning and iterative algorithms, by unfolding the iterative algorithm into a layer-wise structure analogous to DNNs. In this article, we first go through the framework of deep-unfolding for transceiver design with matrix parameters and its recent advancements. Then, some endeavors in applying deep-unfolding approaches in next-generation advanced transceiver design are presented. Moreover, some open issues for future research are highlighted.

eess.SP↗

arXiv2023

FAST: Feature Arrangement for Semantic Transmission

Although existing semantic communication systems have achieved great success, they have not considered that the channel is time-varying wherein deep fading occurs occasionally. Moreover, the importance of each semantic feature differs from each other. Consequently, the important features may be affected by channel fading and corrupted, resulting in performance degradation. Therefore, higher performance can be achieved by avoiding the transmission of important features when the channel state is poor. In this paper, we propose a scheme of Feature Arrangement for Semantic Transmission (FAST). In particular, we aim to schedule the transmission order of features and transmit important features when the channel state is good. To this end, we first propose a novel metric termed feature priority, which takes into consideration both feature importance and feature robustness. Then, we perform channel prediction at the transmitter side to obtain the future channel state information (CSI). Furthermore, the feature arrangement module is developed based on the proposed feature priority and the predicted CSI by transmitting the prior features under better CSI. Simulation results show that the proposed scheme significantly improves the performance of image transmission compared to existing semantic communication systems without feature arrangement.

eess.SP↗

arXiv2023

Robust Semantic Communications with Masked VQ-VAE Enabled Codebook

Although semantic communications have exhibited satisfactory performance for a large number of tasks, the impact of semantic noise and the robustness of the systems have not been well investigated. Semantic noise refers to the misleading between the intended semantic symbols and received ones, thus cause the failure of tasks. In this paper, we first propose a framework for the robust end-to-end semantic communication systems to combat the semantic noise. In particular, we analyze sample-dependent and sample-independent semantic noise. To combat the semantic noise, the adversarial training with weight perturbation is developed to incorporate the samples with semantic noise in the training dataset. Then, we propose to mask a portion of the input, where the semantic noise appears frequently, and design the masked vector quantized-variational autoencoder (VQ-VAE) with the noise-related masking strategy. We use a discrete codebook shared by the transmitter and the receiver for encoded feature representation. To further improve the system robustness, we develop a feature importance module (FIM) to suppress the noise-related and task-unrelated features. Thus, the transmitter simply needs to transmit the indices of these important task-related features in the codebook. Simulation results show that the proposed method can be applied in many downstream tasks and significantly improve the robustness against semantic noise with remarkable reduction on the transmission overhead.

eess.SP↗

arXiv2023

DDPG-Driven Deep-Unfolding with Adaptive Depth for Channel Estimation with Sparse Bayesian Learning

Deep-unfolding neural networks (NNs) have received great attention since they achieve satisfactory performance with relatively low complexity. Typically, these deep-unfolding NNs are restricted to a fixed-depth for all inputs. However, the optimal number of layers required for convergence changes with different inputs. In this paper, we first develop a framework of deep deterministic policy gradient (DDPG)-driven deep-unfolding with adaptive depth for different inputs, where the trainable parameters of deep-unfolding NN are learned by DDPG, rather than updated by the stochastic gradient descent algorithm directly. Specifically, the optimization variables, trainable parameters, and architecture of deep-unfolding NN are designed as the state, action, and state transition of DDPG, respectively. Then, this framework is employed to deal with the channel estimation problem in massive multiple-input multiple-output systems. Specifically, first of all we formulate the channel estimation problem with an off-grid basis and develop a sparse Bayesian learning (SBL)-based algorithm to solve it. Secondly, the SBL-based algorithm is unfolded into a layer-wise structure with a set of introduced trainable parameters. Thirdly, the proposed DDPG-driven deep-unfolding framework is employed to solve this channel estimation problem based on the unfolded structure of the SBL-based algorithm. To realize adaptive depth, we design the halting score to indicate when to stop, which is a function of the channel reconstruction error. Furthermore, the proposed framework is extended to realize the adaptive depth of the general deep neural networks (DNNs). Simulation results show that the proposed algorithm outperforms the conventional optimization algorithms and DNNs with fixed depth with much reduced number of layers.

eess.SP↗

arXiv2023

Adaptive CSI Feedback for Deep Learning-Enabled Image Transmission

Recently, deep learning-enabled joint-source channel coding (JSCC) has received increasing attention due to its great success in image transmission. However, most existing JSCC studies only focus on single-input single-output (SISO) channels. In this paper, we first propose a JSCC system for wireless image transmission over multiple-input multiple-output (MIMO) channels. As the complexity of an image determines its reconstruction difficulty, the JSCC achieves quite different reconstruction performances on different images. Moreover, we observe that the images with higher reconstruction qualities are generally more robust to the noise, and can be allocated with less communication resources than the images with lower reconstruction qualities. Based on this observation, we propose an adaptive channel state information (CSI) feedback scheme for precoding, which improves the effectiveness by adjusting the feedback overhead. In particular, we develop a performance evaluator to predict the reconstruction quality of each image, so that the proposed scheme can adaptively decrease the CSI feedback overhead for the transmitted images with high predicted reconstruction qualities in the JSCC system. We perform experiments to demonstrate that the proposed scheme can significantly improve the image transmission performance with much-reduced feedback overhead.

eess.SP↗

arXiv2023

Design and Performance Analysis of Wireless Legitimate Surveillance Systems with Radar Function

Integrated sensing and communication (ISAC) has recently been considered as a promising approach to save spectrum resources and reduce hardware cost. Meanwhile, as information security becomes increasingly more critical issue, government agencies urgently need to legitimately monitor suspicious communications via proactive eavesdropping. Thus, in this paper, we investigate a wireless legitimate surveillance system with radar function. We seek to jointly optimize the receive and transmit beamforming vectors to maximize the eavesdropping success probability which is transformed into the difference of signal-to-interference-plus-noise ratios (SINRs) subject to the performance requirements of radar and surveillance. The formulated problem is challenging to solve. By employing the Rayleigh quotient and fully exploiting the structure of the problem, we apply the divide-and-conquer principle to divide the formulated problem into two subproblems for two different cases. For the first case, we aim at minimizing the total transmit power, and for the second case we focus on maximizing the jamming power. For both subproblems, with the aid of orthogonal decomposition, we obtain the optimal solution of the receive and transmit beamforming vectors in closed-form. Performance analysis and discussion of some insightful results are also carried out. Finally, extensive simulation results demonstrate the effectiveness of our proposed algorithm in terms of eavesdropping success probability.

eess.SP↗

arXiv2023

Simultaneously Transmitting and Reflecting (STAR) RIS Assisted Over-the-Air Computation Systems

The performance of over-the-air computation (AirComp) systems degrades due to the hostile channel conditions of wireless devices (WDs), which can be significantly improved by the employment of reconfigurable intelligent surfaces (RISs). However, the conventional RISs require that the WDs have to be located in the half-plane of the reflection space, which restricts their potential benefits. To address this issue, the novel family of simultaneously transmitting and reflecting reconfigurable intelligent surfaces (STAR-RIS) is considered in AirComp systems to improve the computation accuracy across a wide coverage area. To minimize the computation mean-squared-error (MSE) in STAR-RIS assisted AirComp systems, we propose a joint beamforming design for optimizing both the transmit power at the WDs, as well as the passive reflect and transmit beamforming matrices at the STAR-RIS, and the receive beamforming vector at the fusion center (FC). Specifically, in the updates of the passive reflect and transmit beamforming matrices, closed-form solutions are derived by introducing an auxiliary variable and exploiting the coupled binary phase-shift conditions. Moreover, by assuming that the number of antennas at the FC and that of elements at the STAR-RIS/RIS are sufficiently high, we theoretically prove that the STAR-RIS assisted AirComp systems provide higher computation accuracy than the conventional RIS assisted systems. Our numerical results show that the proposed beamforming design outperforms the benchmark schemes relying on random phase-shift constraints and the deployment of conventional RIS. Moreover, its performance is close to the lower bound achieved by the beamforming design based on the STAR-RIS dispensing with coupled phase-shift constraints.

eess.SP↗

arXiv2022

Secrecy Rate Maximization of RIS-assisted SWIPT Systems: A Two-Timescale Beamforming Design Approach

Reconfigurable intelligent surfaces (RISs) achieve high passive beamforming gains for signal enhancement or interference nulling by dynamically adjusting their reflection coefficients. Their employment is particularly appealing for improving both the wireless security and the efficiency of radio frequency (RF)-based wireless power transfer. Motivated by this, we conceive and investigate a RIS-assisted secure simultaneous wireless information and power transfer (SWIPT) system designed for information and power transfer from a base station (BS) to an information user (IU) and to multiple energy users (EUs), respectively. Moreover, the EUs are also potential eavesdroppers that may overhear the communication between the BS and IU. We adopt two-timescale transmission for reducing the signal processing complexity as well as channel training overhead, and aim for maximizing the average worst-case secrecy rate achieved by the IU. This is achieved by jointly optimizing the short-term transmit beamforming vectors at the BS as well as the long-term phase shifts at the RIS, under the energy harvesting constraints considered at the EUs and the power constraint at the BS. The stochastic optimization problem formulated is non-convex with intricately coupled variables, and is non-smooth due to the existence of multiple EUs/eavesdroppers. No standard optimization approach is available for this challenging scenario. To tackle this challenge, we propose a smooth approximation aided stochastic successive convex approximation (SA-SSCA) algorithm. Furthermore, a low-complexity heuristic algorithm is proposed for reducing the computational complexity without unduly eroding the performance. Simulation results show the efficiency of the RIS in securing SWIPT systems. The significant performance gains achieved by our proposed algorithms over the relevant benchmark schemes are also demonstrated.

cs.IT↗

arXiv2022

Latency Minimization for mmWave D2D Mobile Edge Computing Systems: Joint Task Allocation and Hybrid Beamforming Design

Mobile edge computing (MEC) and millimeter wave (mmWave) communications are capable of significantly reducing the network's delay and enhancing its capacity. In this paper we investigate a mmWave and device-to-device (D2D) assisted MEC system, in which user A carries out some computational tasks and shares the results with user B with the aid of a base station (BS). We propose a novel two-timescale joint hybrid beamforming and task allocation algorithm to reduce the system latency whilst cut down the required signaling overhead. Specifically, the high-dimensional analog beamforming matrices are updated in a frame-based manner based on the channel state information (CSI) samples, where each frame consists of a number of time slots, while the low-dimensional digital beamforming matrices and the offloading ratio are optimized more frequently relied on the low-dimensional effective channel matrices in each time slot. A stochastic successive convex approximation (SSCA) based algorithm is developed to design the long-term analog beamforming matrices. As for the short-term variables, the digital beamforming matrices are optimized relying on the innovative penalty-concave convex procedure (penalty-CCCP) for handling the mmWave non-linear transmit power constraint, and the offloading ratio can be obtained via the derived closed-form solution. Simulation results verify the effectiveness of the proposed algorithm by comparing the benchmarks.

eess.SP↗

arXiv2022

Multiband Delay Estimation for Localization Using a Two-Stage Global Estimation Scheme

The time of arrival (TOA)-based localization techniques, which need to estimate the delay of the line-of-sight (LoS) path, have been widely employed in location-aware networks. To achieve a high-accuracy delay estimation, a number of multiband-based algorithms have been proposed recently, which exploit the channel state information (CSI) measurements over multiple non-contiguous frequency bands. However, to the best of our knowledge, there still lacks an efficient scheme that fully exploits the multiband gains when the phase distortion factors caused by hardware imperfections are considered, due to that the associated multi-parameter estimation problem contains many local optimums and the existing algorithms can easily get stuck in a "bad" local optimum. To address these issues, we propose a novel two-stage global estimation (TSGE) scheme for multiband delay estimation. In the coarse stage, we exploit the group sparsity structure of the multiband channel and propose a Turbo Bayesian inference (Turbo-BI) algorithm to achieve a good initial delay estimation based on a coarse signal model, which is transformed from the original multiband signal model by absorbing the carrier frequency terms. The estimation problem derived from the coarse signal model contains less local optimums and thus a more stable estimation can be achieved than directly using the original signal model. Then in the refined stage, with the help of coarse estimation results to narrow down the search range, we perform a global delay estimation using a particle swarm optimization-least square (PSO-LS) algorithm based on a refined multiband signal model to exploit the multiband gains to further improve the estimation accuracy. Simulation results show that the proposed TSGE significantly outperforms the benchmarks with comparative computational complexity.

eess.SP↗

arXiv2022

Mixed-Timescale Deep-Unfolding for Joint Channel Estimation and Hybrid Beamforming

In massive multiple-input multiple-output (MIMO) systems, hybrid analog-digital beamforming is an essential technique for exploiting the potential array gain without using a dedicated radio frequency chain for each antenna. However, due to the large number of antennas, the conventional channel estimation and hybrid beamforming algorithms generally require high computational complexity and signaling overhead. In this work, we propose an end-to-end deep-unfolding neural network (NN) joint channel estimation and hybrid beamforming (JCEHB) algorithm to maximize the system sum rate in time-division duplex (TDD) massive MIMO. Specifically, the recursive least-squares (RLS) algorithm and stochastic successive convex approximation (SSCA) algorithm are unfolded for channel estimation and hybrid beamforming, respectively. In order to reduce the signaling overhead, we consider a mixed-timescale hybrid beamforming scheme, where the analog beamforming matrices are optimized based on the channel state information (CSI) statistics offline, while the digital beamforming matrices are designed at each time slot based on the estimated low-dimensional equivalent CSI matrices. We jointly train the analog beamformers together with the trainable parameters of the RLS and SSCA induced deep-unfolding NNs based on the CSI statistics offline. During data transmission, we estimate the low-dimensional equivalent CSI by the RLS induced deep-unfolding NN and update the digital beamformers. In addition, we propose a mixed-timescale deep-unfolding NN where the analog beamformers are optimized online, and extend the framework to frequency-division duplex (FDD) systems where channel feedback is considered. Simulation results show that the proposed algorithm can significantly outperform conventional algorithms with reduced computational complexity and signaling overhead.

cs.IT↗

arXiv2022

A Unified Multi-Task Semantic Communication System with Domain Adaptation

The task-oriented semantic communication systems have achieved significant performance gain, however, the paradigm that employs a model for a specific task might be limited, since the system has to be updated once the task is changed or multiple models are stored for serving various tasks. To address this issue, we firstly propose a unified deep learning enabled semantic communication system (U-DeepSC), where a unified model is developed to serve various transmission tasks. To jointly serve these tasks in one model with fixed parameters, we employ domain adaptation in the training procedure to specify the task-specific features for each task. Thus, the system only needs to transmit the task-specific features, rather than all the features, to reduce the transmission overhead. Moreover, since each task is of different difficulty and requires different number of layers to achieve satisfactory performance, we develop the multi-exit architecture to provide early-exit results for relatively simple tasks. In the experiments, we employ a proposed U-DeepSC to serve five tasks with multi-modalities. Simulation results demonstrate that our proposed U-DeepSC achieves comparable performance to the task-oriented semantic communication system designed for a specific task with significant transmission overhead reduction and much less number of model parameters.

eess.SP↗

arXiv2022

Robust Semantic Communications Against Semantic Noise

Although the semantic communications have exhibited satisfactory performance in a large number of tasks, the impact of semantic noise and the robustness of the systems have not been well investigated. Semantic noise is a particular kind of noise in semantic communication systems, which refers to the misleading between the intended semantic symbols and received ones. In this paper, we first propose a framework for the robust end-to-end semantic communication systems to combat the semantic noise. Particularly, we analyze the causes of semantic noise and propose a practical method to generate it. To remove the effect of semantic noise, adversarial training is proposed to incorporate the samples with semantic noise in the training dataset. Then, the masked autoencoder (MAE) is designed as the architecture of a robust semantic communication system, where a portion of the input is masked. To further improve the robustness of semantic communication systems, we firstly employ the vector quantization-variational autoencoder (VQ-VAE) to design a discrete codebook shared by the transmitter and the receiver for encoded feature representation. Thus, the transmitter simply needs to transmit the indices of these features in the codebook. Simulation results show that our proposed method significantly improves the robustness of semantic communication systems against semantic noise with significant reduction on the transmission overhead.

eess.SP↗

arXiv2022

Joint Pilot Optimization, Target Detection and Channel Estimation for Integrated Sensing and Communication Systems

Radar sensing will be integrated into the 6G communication system to support various applications. In this integrated sensing and communication system, a radar target may also be a communication channel scatterer. In this case, the radar and communication channels exhibit certain joint burst sparsity. We propose a two-stage joint pilot optimization, target detection and channel estimation scheme to exploit such joint burst sparsity and pilot beamforming gain to enhance detection/estimation performance. In Stage 1, the base station (BS) sends downlink pilots (DP) for initial target search, and the user sends uplink pilots (UP) for channel estimation. Then the BS performs joint target detection and channel estimation based on the reflected DP and received UP signals. In Stage 2, the BS exploits the prior information obtained in Stage 1 to optimize the DP signal to achieve beamforming gain and further refine the performance. A Turbo Sparse Bayesian inference algorithm is proposed for joint target detection and channel estimation in both stages. The pilot optimization problem in Stage 2 is a semi-definite programming with rank-1 constraints. By replacing the rank-1 constraint with a tight and smooth approximation, we propose an efficient pilot optimization algorithm based on the majorization-minimization method. Simulations verify the advantages of the proposed scheme.

cs.IT↗