arXiv subjects

Yutaro Enomoto

Publications and source records attributed to Yutaro Enomoto.

At least 19 recordsLinked to original sources

arXiv2026

Quantum Noise Reduction in the Space-based Gravitational Wave Antenna DECIGO Using Optical Springs and Homodyne Detection scheme

The DECi-hertz Interferometer Gravitational-wave Observatory (DECIGO) is a planned space-based, next-generation gravitational wave detector aimed at observing primordial gravitational waves originating form cosmic inflation. This work focuses on reducing the quantum noise, in the instrument's observation band of 0.1 to 10 Hz, by employing optical springs and a homodyne detection scheme. Although detuning 1000\,km long arm cavities was previously considered ineffective due to quantum state degradation from diffraction losses, we revisit this problem by formulating a new, rigorous model for quantum state of light by accounting for the vacuum state mixing as a result of diffraction losses. This work shows that high sensitivities can be achieved by employing optimal configurations of optical springs and homodyne detection schemes even with diffraction losses. These improvements alone are still not sufficient to achieve sensitivities to detect primordial gravitational waves as other technical noises limit further improvement.

gr-qc↗

arXiv2026

A Polarization-Decomposed Method for Simulating Inhomogeneous Birefringence in Laser-Interferometric Gravitational-Wave Detectors

Birefringence in test mass substrates is an emerging limitation for current and future laser-interferometric gravitational-wave detectors, particularly as detectors move toward higher circulating power, cryogenic operation, and crystalline optical materials. Spatially varying birefringence alters both the polarization state and spatial mode content of the intracavity field, reducing interference contrast and coupling into length and alignment control signals. Accurate modeling of these effects is complicated by the fact that most frequency-domain simulation tools employ scalar modal propagation and lack native support for polarization and two-dimensional substrate maps. In this work, we present a practical and general method for simulating inhomogeneous birefringence without modifying existing simulation frameworks. The approach represents the two polarization components as independent scalar fields and introduces their coupling through an equivalent triple-Mach-Zehnder construction that reproduces the Jones matrix of a birefringent medium. We demonstrate the method using realistic birefringence maps of the KAGRA sapphire input test masses. The technique is compatible with any frequency-domain interferometer model and enables efficient birefringence studies for next-generation gravitational-wave detectors.

physics.ins-det↗

arXiv2026

Quantum Noise from Vacuum Field Injection in Optical Cavities with Diffraction-related Loss

The space-based gravitational wave detector DECIGO is designed to observe primordial gravitational waves with 1,000 km Fabry-Perot cavities. Its sensitivity is limited by quantum noise, and although squeezing can suppress it, its effectiveness is reduced by diffraction-related loss, which leads to the injection of vacuum fields into the interferometer. This paper presents a rigorous treatment of quantum field propagation in the presence of diffraction and higher-order mode losses, deriving input-output relations, and modeling their impact via an optomechanical block diagram. The analysis shows that diffraction-induced vacuum fields slightly increase radiation pressure noise, while shot noise remains unaffected. Nevertheless, cavity detuning with homodyne detection yields a dip in the noise spectrum. By accurately capturing these effects, this framework enables a detailed study of sensitivity improvements made by either just detuning the main cavity while implementing homodyne detection, or by combining this with optical-spring quantum locking using auxiliary cavities, laying a firm foundation for enhancing DECIGO's capability to detect primordial gravitational waves.

physics.optics↗

arXiv2026

Clock Noise Cancellation in Heterodyne Links between Optical Cavities for Space-Borne Gravitational-Wave Telescopes

Space-borne gravitational-wave telescopes are key to extend the observation band below $10\,\mathrm{Hz}$. The use of inter-satellite optical cavities linked by heterodyne interferometry is a promising approach to reach the sensitivity level of $10^{-22}/\sqrt{\mathrm{Hz}}$ in the decihertz band. While heterodyne interferometry is advantageous for relaxing arm-length control requirements, it introduces susceptibility to clock jitter, which can be a significant noise source. In the back-linked Fabry--Perot (BLFP) interferometer aiming at the decihertz band, the required clock stability exceeds that of current space-qualified oscillators by more than an order of magnitude. We propose a clock noise cancellation scheme that uses two heterodyne signals with positive and negative beat-note frequencies, naturally obtained using both incoming and outgoing laser beams of arm cavities without additional clock modulation schemes. By forming a weighted combination of these signals with time-dependent coefficients, clock jitter contributions are eliminated while preserving gravitational-wave information. We present the theoretical framework, analyze performance under realistic arm-length drifts, and validate the approach through time-domain simulations using parameters from the B-DECIGO concept. Results show that the synthesized signal recovers the original sensitivity and even improves the signal-to-noise ratio by a factor of $\sqrt{2}$ for shot noise.

astro-ph.IM↗

arXiv2026

Jiggled interferometer: Ground-based gravitational wave detector using rapidly-repeated free-falling test masses

We propose the Jiggled Interferometer (JIGI), a novel ground-based gravitational wave detector employing low-frequency noise mitigation similar to that of space-based detectors. Using rapidly-repeated free-fall test masses, JIGI eliminates seismic and suspension thermal noise during free fall. Compared to the Juggled Interferometer, it offers improved angular stability and avoids tracking lasers. We analyze detrending -- a required step to remove actuation-induced noise -- and show sensitivity gains of about four orders of magnitude in the 0.1-0.3 Hz band, relative to seismic and suspension noise extrapolated from the Cosmic Explorer.

gr-qc↗

arXiv2025

Frequency-dependent squeezing for gravitational-wave detection through quantum teleportation

Ground-based interferometric gravitational wave detectors are highly precise sensors for weak forces, limited in sensitivity across their detection band by quantum fluctuations of light. Current and future instruments address this limitation by injecting frequency-dependent squeezed vacuum into the detection port, utilizing narrow-band, low-loss optical cavities for optimal rotation of the squeezing ellipse at each signal frequency. This study introduces a novel scheme employing the principles of quantum teleportation and entangled states of light. It allows achieving broadband suppression of quantum noise in detuned signal recycled-Fabry-Perot--Michelson interferometers, which is the baseline design of the low-frequency detector within the Einstein Telescope xylophone detector, without requiring additional filter cavities or modifications to the core optics of the main interferometer.

quant-ph↗

arXiv2024

Quantum-enhanced optical phase-insensitive heterodyne detection beyond 3-dB noise penalty of image band

Optical phase-insensitive heterodyne (beat-note) detection, which measures the relative phase of two beams at different frequencies through their interference, is a key sensing technology for various spatial/temporal measurements, such as frequency measurements in optical frequency combs. However, its sensitivity is limited not only by shot noise from the signal frequency band but also by the extra shot noise from an image band, known as the 3-dB noise penalty. Here, we propose a method to remove shot noise from all these bands using squeezed light. We also demonstrate beyond-3-dB noise reduction experimentally, confirming that our method actually reduces shot noise from both the signal and extra bands simultaneously. Our work should boost the sensitivity of various spatial/temporal measurements beyond the current limitations.

quant-ph↗

arXiv2023

Optimization of quantum noise in space gravitational-wave antenna DECIGO with optical-spring quantum locking considering mixture of vacuum fluctuations in homodyne detection

Quantum locking using optical spring and homodyne detection has been devised to reduce quantum noise that limits the sensitivity of DECIGO, a space-based gravitational wave antenna in the frequency band around 0.1 Hz for detection of primordial gravitational waves. The reduction in the upper limit of energy density $Ω_{\mathrm{GW}}$ from $2{\times}10^{-15}$ to $1{\times}10^{-16}$, as inferred from recent observations, necessitates improved sensitivity in DECIGO to meet its primary science goals. To accurately evaluate the effectiveness of this method, this paper considers a detection mechanism that takes into account the influence of vacuum fluctuations on homodyne detection. In addition, an advanced signal processing method is devised to efficiently utilize signals from each photodetector, and design parameters for this configuration are optimized for the quantum noise. Our results show that this method is effective in reducing quantum noise, despite the detrimental impact of vacuum fluctuations on its sensitivity.

gr-qc↗

arXiv2023

Continuous-variable quantum approximate optimization on a programmable photonic quantum processor

Variational quantum algorithms (VQAs) provide a promising approach to achieving quantum advantage for practical problems on near-term noisy intermediate-scale quantum (NISQ) devices. Thus far, most studies on VQAs have focused on qubit-based systems, but the power of VQAs can be potentially boosted by exploiting infinite-dimensional continuous-variable (CV) systems. Here, we implement the CV version of one VQA, a quantum approximate optimization algorithm by developing an automated collaborative computing system between a programmable photonic quantum computer and a classical computer. We experimentally demonstrate that this algorithm solves the minimization problem of simple continuous functions by implementing the quantum version of gradient descent to localize an initially broadly-distributed wavefunction to the minimum. This method allows the execution of a practical CV quantum algorithm on a physical platform. Our work can be extended to the minimization of more general functions, providing an alternative to achieve the quantum advantage in practical problems.

quant-ph↗

arXiv2023

Time-Domain Universal Linear-Optical Operations for Universal Quantum Information Processing

We demonstrate universal and programmable three-mode linear optical operations in the time domain by realizing a scalable dual-loop optical circuit suitable for universal quantum information processing (QIP). The programmability, validity, and deterministic operation of our circuit are demonstrated by performing nine different three-mode operations on squeezed-state pulses, fully characterizing the outputs with variable measurements, and confirming their entanglement. Our circuit can be scaled up just by making the outer loop longer and also extended to universal quantum computers by incorporating feedforward systems. Thus, our work paves the way to large-scale universal optical QIP.

quant-ph↗

arXiv2023

Programmable time-multiplexed squeezed light source

One of the leading approaches to large-scale quantum information processing (QIP) is the continuous-variable (CV) scheme based on time multiplexing (TM). As a fundamental building block for this approach, quantum light sources to sequentially produce time-multiplexed squeezed-light pulses are required; however, conventional CV TM experiments have used fixed light sources that can only output the squeezed pulses with the same squeezing levels and phases. We here demonstrate a programmable time-multiplexed squeezed light source that can generate sequential squeezed pulses with various squeezing levels and phases at a time interval below 100 ns. The generation pattern can be arbitrarily chosen by software without changing its hardware configuration. This is enabled by using a waveguide optical parametric amplifier and modulating its continuous pump light. Our light source will implement various large-scale CV QIP tasks.

quant-ph↗

arXiv2022

First-step experiment in developing optical-spring quantum locking for DECIGO: sensitivity optimization for simulated quantum noise by completing the square

DECi-hertz Interferometer Gravitational Wave Observatory (DECIGO) is a future mission for a space-borne laser interferometer. DECIGO has 1,000-km-long arm cavities mainly to detect the primordial gravitational waves (PGW) at lower frequencies around 0.1 Hz. Observations in the electromagnetic spectrum have lowered the bounds on the upper limit of PGW energy density ($Ω_{\rm gw} \sim 10^{-15} \to 10^{-16}$). As a result, DECIGO's target sensitivity, which is mainly limited by quantum noise, needs further improvement. To maximize the feasibility of detection while constrained by DECIGO's large diffraction loss, a quantum locking technique with an optical spring was theoretically proposed to improve the signal-to-noise ratio of the PGW. In this paper, we experimentally verify one key element of the optical-spring quantum locking: sensitivity optimization by completing the square of multiple detector outputs. This experiment is operated on a simplified tabletop optical setup with classical noise simulating quantum noise. We succeed in getting the best of the sensitivities with two different laser powers by the square completion method.

gr-qc↗

arXiv2022

Can the phase of radiation pressure fluctuations be flipped in a single path for laser interferometric gravitational wave detectors?

Radiation pressure (RP) noise, one component of quantum noise, can limit the sensitivity of laser interferometric gravitational wave (GW) detectors at lower frequencies. We conceived a possible RP noise cancellation method, using phase flipped ponderomotive-squeezed light (FPSL) incident on free-mass mirrors in interferometers' arms. This possibility is investigated under the constraint that the method is for space-based GW detectors in a broad frequency band lower than 1 Hz without using a long optical cavity. Considering various patterns in a single path small-scale case to generate the FPSL, we proved that no configuration exists in the single path case.

gr-qc↗

arXiv2022

Scattering Loss in Precision Metrology due to Mirror Roughness

Optical losses degrade the sensitivity of laser interferometric instruments. They reduce the number of signal photons and introduce technical noise associated with diffuse light. In quantum-enhanced metrology, they break the entanglement between correlated photons. Such decoherence is one of the primary obstacles in achieving high levels of quantum noise reduction in precision metrology. In this work, we compare direct measurements of cavity and mirror losses in the Caltech 40m gravitational-wave detector prototype interferometer with numerical estimates obtained from semi-analytic intra-cavity wavefront simulations using mirror surface profile maps. We show a unified approach to estimating the total loss in optical cavities (such as the LIGO gravitational detectors) that will lead towards the engineering of systems with minimum decoherence for quantum-enhanced precision metrology.

physics.optics↗

arXiv2021

Programmable and sequential Gaussian gates in a loop-based single-mode photonic quantum processor

A quantum processor to import, process, and export optical quantum states is a common core technology enabling various photonic quantum information processing. However, there has been no photonic processor which is simultaneously universal, scalable, and programmable. Here, we report on an original loop-based single-mode versatile photonic quantum processor which is designed to be universal, scalable, and programmable. Our processor can perform arbitrarily many steps of programmable quantum operations on a given single-mode optical quantum state by time-domain processing in a dynamically controlled loop-based optical circuit. We use this processor to demonstrate programmable single-mode Gaussian gates and multi-step squeezing gates. In addition, we prove that the processor can perform universal quantum operations by injecting appropriate ancillary states and also be straightforwardly extended to a multi-mode processor. These results show that our processor is programmable, scalable, and potentially universal, leading to be suitable for general-purpose applications.

quant-ph↗

arXiv2021

Improving force sensitivity by amplitude measurement of light reflected from a detuned optomechanical cavity

The measurement of weak continuous forces exerted on a mechanical oscillator is a fundamental problem in various physical experiments. It is fundamentally impeded by quantum back-action from the meter used to sense the displacement of the oscillator. In the context of interferometric displacement measurements, we here propose and demonstrate the working principle of a scheme for coherent back-action cancellation. By measuring the amplitude quadrature of the light reflected from a detuned optomechanical cavity inside which a stiff optical spring is generated, back-action can be cancelled in a narrow band of frequencies. This method provides a simple way to improve the sensitivity in experiments limited by quantum back-action without injection of squeezed light or stable homodyne readout.

quant-ph↗

arXiv2021

Cryogenic suspension design for a kilometer-scale gravitational-wave detector

We report the mirror suspension design for Large-scale Cryogenic Gravitational wave Telescope, KAGRA, during bKAGRA Phase 1. Mirror thermal noise is one of the fundamental noises for room-temperature gravitational-wave detectors such as Advanced LIGO and Advanced Virgo. Thus, reduction of thermal noise is required for further improvement of their sensitivity. One effective approach for reducing thermal noise is to cool the mirrors. There are many technical challenges that must be overcome to cool the mirrors, such as cryocooler induced vibrations, thermal drift in suspensions, and reduction in duty cycling due to the increased number of potential failure mechanisms. Our mirror suspension has a black coating that makes radiative cooling more efficient. For conduction cooling, we developed ultra high purity aluminum heat links, which yield high thermal conductivity while keeping the spring constant sufficiently small. A unique inclination adjustment system, called moving mass, is used for aligning the mirror orientation in pitch. Photo-reflective displacement sensors, which have a large range, are installed for damping control on marionette recoil mass and intermediate recoil mass. Samarium cobalt magnets are used for coil-magnet actuators to prevent significant change of magnetism between room temperature and cryogenic temperature. In this paper, the design of our first cryogenic payload and its performance during bKAGRA Phase 1 are discussed.

physics.ins-det↗

arXiv2020

Optimization of quantum noise by completing the square of multiple interferometer outputs in quantum locking for gravitational wave detectors

The quantum locking technique, which uses additional short low-loss sub-cavities, is effective in reducing quantum noise in space gravitational wave antenna DECIGO. However, the quantum noise of the main interferometer depends on the control systems in the sub-cavities. Here we demonstrate a new method to optimize the quantum noise independently of the feedback gain by completing the square in the quantum locking system. We successfully demonstrate in simulations that this method is effective in optimizing the homodyne angle to the best quantum-noise-limited sensitivity.

gr-qc↗