SearcharxivSearch

arXiv subjects

Yuxin Leng

Publications and source records attributed to Yuxin Leng.

At least 19 recordsLinked to original sources

Generation of dense relativistic electron beams via vortex laser-driven self-generated magnetic pinching

In multi-petawatt laser plasma accelerators, achieving high-density relativistic electron beams is typically accompanied by large transverse divergence, limiting the attainable effective electron density needed for high-flux interaction regimes relevant to laboratory astrophysics. Here we report experimental demonstration of self-generated magnetic pinching (SMP), a collective mechanism that actively regulates transverse beam dynamics using a Laguerre-Gaussian laser at strong relativistic intensity (~8 x 10^19 W/cm^2) interacting with an underdense plasma. The electron beam evolves from a two-lobe high-charge injection structure into a compressed, high-density profile, yielding a threefold reduction in divergence and nearly an order-of-magnitude enhancement in effective beam density compared with a Gaussian driver. Particle-in-cell simulations agree with the experimental observations and reveal that a self-generated azimuthal magnetic field governs the electron dynamics within the SMP regime, which is defined by the forming condition S = 0.717 l a0 [ne(10^18 cm^-3)]^-3/4 = 1, where l, a0, and ne are topological charge, laser amplitude, and plasma density, respectively. A transient kick from a dense inner sheath electron population drives collective magnetic pinching, transforming an initially separated electron distribution into a compressed and well-collimated beam. For higher-power laser systems, the forming condition can be extended to higher plasma densities and larger orbital angular momentum modes, potentially enabling electron beams with charges exceeding several nC and effective densities above 10^19 cm^-3. This mechanism provides a route to overcoming transverse expansion and enhancing rare interaction processes relevant to high-flux particle sources.

physics.plasm-ph

Low-threshold efficient N${_2^+}$ lasing driven by sub-cycle soliton dynamics in a hollow waveguide

The phenomenon of N${_2^+}$ lasing, observed in femtosecond-laser filamentation, attract considerable interests in recent several years, with great application potentials in fields of remote sensing and ultrafast spectroscopy. Efficient N${_2^+}$ lasing at relatively-low pump energies and with high beam quality, while being highly-demanded for applications, remains, however, quite challenging in practical experiments. Here, we demonstrate a new route of generating low-threshold N${_2^+}$ lasing with unprecedently-high efficiency, which is enabled by soliton dynamics in a gas-filled hollow-tapered-capillary system. High-order-soliton compression of a 12-fs, 10-$μ$J-level pump pulse forms a sub-cycle asymmetric transient that tunnel-ionizes N${_2}$ to N${_2^+}$ and, through direct, single-photon resonant excitation, creates population inversion between the ground state ${X^2Σ_g^+}$ and the excited state ${B^2Σ_u^+}$${-}$a dynamic process distinct from the widely adopted three-state coupling picture${-}$and remarkably at unexpectedly low pump energy. In the experiments, we obtained 100-nJ-level N${_2^+}$ lasing pulses at 391 nm with conversion efficiencies up to 3.3$\times$10$^{-3}$, at pump energies of less than 50 $μ$J. These results represent improvement of more than one orders of magnitude in both generation efficiency and lasing threshold, compared with prevailing filamentation-based schemes. Our study bridges two generally-disparate fields (sub-cycle soliton dynamics and N${_2^+}$ lasing), and paves the way for narrow-band, high-beam-quality lasing pulses that may find wide applications in advanced spectroscopy and nonlinear pump-probe experiments.

physics.optics

Enhanced electron injection for efficient proton acceleration and neutron production in femtosecond laser-driven nano-structured targets

Micro- or nano-structured targets are advantageous in enhancing and manipulating laser-proton acceleration, due to the increased absorption of laser energy and onset of direct laser acceleration for high-energy electrons. Here, we experimentally demonstrate that nano-wire-array printed on a flat substrate is an efficient nano-injector of relativistic electrons that leads to a significant boost of laser-driven proton acceleration and neutron production beyond normal geometry. By employing an ultra-intense (2*1021 W/cm2) femtosecond laser pulse to irradiate nano-wire-array targets, protons with cut-off energies of 62.8 MeV are generated, and notably, the energy conversion efficiency from laser to protons reaches up to 9% - 3.5 times higher than that of flat foils. After bombarding a beryllium converter, 1.1*1010 neutrons are produced. Full 3D particle-in-cell simulations have reproduced experimental results and reveal interference mechanisms between the nano-wires and substrate, leading to continuous pumping of electrons from the substrate and standing-wave enhanced re-injection from the wire tip. This efficient injection finally results in the large sheath field and thus high yield of energetic protons and neutrons. Dependence on the wire length and scaling with laser amplitude are further discussed. These results suggest that 3D-printed structures are promising in developing compact laser-driven high-flux proton and neutron sources for numerous applications.

physics.plasm-ph

Ho:YAG Thin-Disk Laser with 230 W Multimode and 150 W Single-Mode Output

We report a continuous-wave Ho:YAG thin-disk laser operating at the hundred-watt power level. In multimode operation, the laser delivers a maximum output power of 230 W, with a slope efficiency of 35.9% and an optical-to-optical conversion efficiency of 35.3%. In single-mode operation, an output power of 152.3 W is achieved, with beam quality factors M2 of 1.08 and 1.06 in the horizontal and vertical directions, respectively.

physics.optics

Enhancement of vacuum-ultraviolet dispersive-wave emission using gas-filled tapered hollow-core fibers

The recent breakthroughs in laser-driving 229Th nuclear transition have created an urgent demand for coherent vacuum-ultraviolet (VUV) sources delivering high spectral brightness at the critical 148.38 nm isomer energy. However, generating sufficient photon flux to overcome the low nuclear excitation probability remains a challenge for compact setups. While resonant dispersive wave emission in gas-filled hollow-core fibers offers a promising route, standard capillaries face a fundamental trade-off: maximizing input coupling requires large core diameters, whereas efficient nonlinear VUV conversion demands the high intensities using small cores. Here, we resolve this conflict using a gas-filled tapered capillary fiber. This architecture utilizes a longitudinally decreasing core diameter to combine a large input aperture with adiabatic field concentration, thereby continuously enhancing the nonlinear interaction. Experimentally, we demonstrate a widely tunable source (135-240 nm) that achieves a twofold efficiency enhancement specifically at the 148.38 nm wavelength compared to uniform geometries. By providing a scalable route to high-flux VUV generation, this work establishes a critical tabletop tool for advancing solid-state nuclear clocks and time-resolved spectroscopy.

physics.optics

Deep-ultraviolet Cherenkov radiation in all-normal-dispersion waveguide enabled by spatial-temporal dynamics

Nonlinear propagation of ultrashort pulses in multi-mode waveguides, featuring complex spatial-temporal dynamics, provides new degrees of freedom in the fields of nonlinear optics and ultrafast lasers. Here, we demonstrate a new scheme of ultraviolet Cherenkov (dispersive-wave) radiation in a gas-filled capillary with unprecedently-high pulse energy, enabled by spatial-temporal dynamics. We found that mJ-level, 40-fs pulses, launched into a large-core capillary filled with high-pressure noble gas, would experience self-phase-modulation and self-steepening effects in this normal-dispersion waveguide, leading to high-intensity shock wave generation and asymmetric spectral broadening. Spatial-temporal dynamics, stemming from strong nonlinear inter-mode coupling, causes spatial shrink and temporal deceleration of the pulse which dramatically alter the capillary dispersion landscape. As a result, a phase-matching point can be created in the ultraviolet, giving rise to the radiation of multi-mode dispersive waves with 100-μJ-level pulse energies and few-fs pulse widths. Our findings inspire new insights into multi-mode nonlinear optics, and the demonstrated high-energy ultraviolet light source with broadband tunability and compact set-up configuration, may find a few applications in time-resolved spectroscopy, ultrafast electronics and femtosecond chemistry.

physics.optics

Full-span reversible space-time birefringence

Birefringence, the polarization-dependent splitting of light in anisotropic crystals, enables diverse optical phenomena and advanced functionalities such as optical communication, nonlinear optics, and quantum optics. However, conventional methods for controlling birefringence typically rely on engineering the optical crystal structure or applying external stimuli such as electric fields, mechanical stress or thermal variations, which are often constrained by limited tunability, challenges in integration with compact photonic devices or slow response time. Here, we introduce a new degree of freedom to manipulate the birefringence of light propagation in optical crystals through programming the spatiotemporal spectral phase of the incident light wave. We demonstrate this approach achieves continuous tuning of birefringence across a spectrum more than 100 times broader than that achievable with conventional birefringence tuning, spanning from positive through zero to negative values, irrespective of the crystal's optical sign and without inherent physical limitations. This unique optical behavior provides a versatile platform for investigating the complex dynamics of wave flow in anisotropic media, while the broad tunability of this space-time birefringence will spur innovations in ultrafast optical manipulation, optical computation, and quantum information processing-applications that demand rapid and flexible device reconfiguration.

physics.optics

TF-UNet: Resolving Complex Speckles for Single-Shot Reconstruction of 512^2-Matrix Images Using a Micron-Sized Optical Fiber

Tapered optical fibers (TFs), with diameters gradually reduced from hundreds of microns to the micron scale, offer key advantages over conventional flat optical fibers (FFs), including uniform illumination, efficient long-range signal collection, and minimal invasiveness for applications in high-sensitivity biosensing, optogenetics, and photodynamic therapy. However, high-fidelity, single-shot imaging through a single TF remains underexplored due to intermodal coupling from the tapering geometry, which distorts output speckle patterns and poses challenges for image reconstruction using existing deep learning methods. Here, we propose a physics-inspired TF-UNet architecture that augments skip connections with hierarchical grouped-MLP fusion to effectively capture non-local, cross-scale dependencies caused by intermodal coupling in TFs. We experimentally validate our method on both FFs and TFs, demonstrating that TF-UNet outperforms standard U-Net variants in structural and perceptual fidelity while maintaining competitive PSNR at quadratic complexity. Our study offers a promising approach for deep learning-based imaging through micron-sized, ultrafine optical fibers, enabling scanning-free single-shot reconstruction on a 512x512 reconstruction matrix, and further validating the framework on biologically meaningful neuronal and vascular datasets for physically interpretable characterization.

physics.optics

10-W Sub-100-fs Ultrafast Cr:ZnS/ZnSe MOPA System enabled by doping gradient engineering

We report on a high-power mid-infrared femtosecond master oscillator power amplifier (MOPA) system, employing Cr:ZnS and Cr:ZnSe polycrystals with fine-tuned doping profiles. Based on the soft-aperture Kerr-lens mode-locking in the soliton regime, the seed oscillator generates ~40-fs pulses with a repetition rate ~173 MHz with an average power close to 400 mW. The amplification process of the seed pulse train is investigated in depth in a single-pass configuration for both Cr:ZnS and Cr:ZnSe crystal rods. For further power scaling, a dual-stage MOPA system has been implemented, generating pulse trains with an average power up to 10.4 W, limited only by the pump source, with a re-compressed pulse duration of 78 fs using a dispersion compensator comprising chirped mirrors and sapphire plates. This work paves the way for further power scaling of mid-infrared Cr:ZnS/ZnSe ultrafast laser systems without moving parts for applications in material processing, remote sensing and medicine.

physics.optics

Collimated Hard X-Rays from Hybrid Laser and Plasma Wakefield Accelerators

We report a synergistic enhancement of betatron radiation based on the hybrid laser and plasma wakefield acceleration scheme. Quasi-phase-stable acceleration in an up-ramp plasma density first generates GeV-energy electron beams that act as a drive beam for PWFA, which then further accelerates the witness beam to GeV energies, enhancing both photon energy and flux. A full width at half maximum divergence $(6.1 \pm 1.9)\times(5.8\pm 1.6) $ mrad$^2$ of betatron radiation, a critical energy of $71 \pm 8$ keV, and an average flux of more than $10^{14}$ photons per steradian above 5 keV were all experimentally obtained thanks to this scheme, which was an order of magnitude higher than the previous reports. Quasi-three-dimensional particle-in-cell simulations were used to model the acceleration and radiation of the electrons in our experimental conditions, establishing a new paradigm for compact collimated hard X-ray sources.

physics.plasm-ph

Isolated attosecond free-electron laser based on a sub-cycle driver from hollow capillary fibers

The attosecond light source provides an advanced tool for investigating electron motion using time-resolved-spectroscopy techniques. Isolated attosecond pulses, especially, will significantly advance the study of electron dynamics. However, achieving high-intensity isolated attosecond pulses is still challenging at the present stage. In this paper, we propose a novel scheme for generating high-intensity, isolated attosecond soft X-ray free-electron lasers (FELs) using a mid-infrared (MIR) sub-cycle modulation laser from gas-filled hollow capillary fibers (HCFs). The multi-cycle MIR pulses are first compressed to sub-cycle using a helium-filled HCF with decreasing pressure gradient due to soliton self-compression effect. By utilizing such sub-cycle MIR laser pulse to modulate the electron beam, we can obtain a quasi-isolated current peak, which can then produce an isolated FEL pulse with high signal-to-noise ratio (SNR), naturally synchronizing with the sub-cycle MIR laser pulse. Numerical simulations have been carried out, including the sub-cycle pulse generation, electron beam modulation and FEL radiation processes. The simulation results indicate that an isolated attosecond pulse with wavelength of 1 nm, peak power of ~28 GW, pulse duration of ~600 attoseconds and SNR of ~96.4% can be generated by our proposed method. The numerical results demonstrated here pave a new way for generating the high-intensity isolated attosecond soft X-ray pulse, which may have many applications in nonlinear spectroscopy and atomic-site electronic process.

physics.acc-ph

Flexible delivery of high-power picosecond laser in purely-single optical mode of anti-resonant hollow-core fiber for micromachining

We present the flexible delivery of picosecond laser pulses with up to 20 W average power over a 3-m-long sample of anti-resonant hollow-core fiber (AR-HCF) for laser micromachining applications. Our experiments highlight the importance of optical mode purity of the AR-HCF for the manufacturing precision. We demonstrate that compared with an AR-HCF sample with a capillary to core (d/D) ratio of ~0.5, the AR-HCF with a d/D ratio of ~0.68 exhibits better capability of high-order-mode suppression, giving rise to improved micromachining quality. Moreover, the AR-HCF delivery system exhibits better pointing stability and set-up flexibility than the free-space beam delivery system. These results pave the way to practical applications of AR-HCF in developing advanced equipment for ultrafast laser micromachining.

physics.optics

Enhanced Proton Acceleration via Petawatt Laguerre-Gaussian Lasers

High-energy, high-flux collimated proton beams with high repetition rates are critical for applications such as proton therapy, proton radiography, high-energy-density matter generation, and compact particle accelerators. However, achieving proton beam collimation has typically relied on complex and expensive target fabrication or precise control of auxiliary laser pulses, which poses significant limitations for high-repetition applications. Here, we demonstrate an all-optical method for collimated proton acceleration using a single femtosecond Laguerre-Gaussian (LG) laser with an intensity exceeding 1020 W/cm2 irradiating a simple planar target. Compared to conventional Gaussian laser-driven schemes, the maximum proton energy is enhanced by 60% (reaching 35 MeV) and beam divergence is much reduced. Particle-in-cell simulations reveal that a plasma jet is initially focused by the hollow electric sheath field of the LG laser, and then electrons in the jet are further collimated by self-generated magnetic fields. This process amplifies the charge-separation electric field between electrons and ions, leading to increased proton energy in the longitudinal direction and improved collimation in the transverse direction. This single-LG-laser-driven collimation mechanism offers a promising pathway for high-repetition, high-quality proton beam generation, with broad potential applications including proton therapy and fast ignition in inertial confinement fusion.

physics.plasm-ph

Three-stage dynamics of nonlinear pulse amplification in ultrafast mid-infrared fiber amplifier with anomalous dispersion

Nonlinear pulse amplification in optical fiber, with capability of breaking the gain-bandwidth limitation, is a key technique for high-energy, ultrafast pulse generation. In the longer wavelength region (including 1.55 μm, 2 μm and 2.8 μm) where the gain fiber has normally strong anomalous dispersion, the nonlinear amplification process over fiber exhibits more complicated dynamics than that of its 1-μm counterpart, and the underlying mechanism of the nonlinear pulse propagation process in high-gain anomalous fiber is still elusive so far. Here, we demonstrate an in-depth study on the nonlinear amplification process in high-gain ultrafast mid-infrared fiber, providing clear physical understanding on the debate of adiabatic soliton compression. We unveil that under the high-gain condition, the ultrafast pulse launched into the anomalous gain fiber experiences successively three distinct stages, named as the balance between linear and nonlinear chirp, high-order-soliton-like pulse compression and pulse splitting due to high-order effects. While a relatively-clean ultrafast pulse can be obtained immediately after the high-order-soliton-like compression stage, excessive gain fiber length could hardly enhance further the pulse peak power due to soliton splitting. Our findings can provide several critical guidelines for designing high-power ultrafast fiber amplifiers at near- and mid-infrared wavelengths.

physics.optics

Tunable ultraviolet dispersive-wave emission driven directly by 40-fs Ti: sapphire laser pulses in hollow capillary fiber

We demonstrate that by using 1-m-long gas-filled hollow capillary fiber (HCF) with a core diameter of 100 μm, tunable ultraviolet (UV) dispersive-wave (DW) pulses can be generated in a compact, single-stage set-up driven directly by 40-fs Ti: sapphire laser pulses. By adjusting the gas type and pressure inside the HCF, the central wavelength of the UV DW can be continuously tuned from 185 nm to ~450 nm. In the experiment, we found that for longer-wavelength (from ~320 to ~450 nm) DW generation, Raman-active gas filled in the HCF can efficiently suppress the pulse splitting effect of the high-order soliton due to the Raman-induced pulse energy dissipation, leading to the high-quality DW generation at these wavelengths with smooth, single-peak spectra. These results provide some useful insights for designing compact, wavelength-tunable ultrafast UV light sources with microjoule-level pulse energies.

physics.optics

Isolated Attosecond $γ$-Ray Pulse Generation with Transverse Orbital Angular Momentum Using Intense Spatiotemporal Optical Vortex Lasers

An isolated attosecond vortex $γ$-ray pulse is generated by using a relativistic spatiotemporal optical vortex (STOV) laser in particle-in-cell simulations. A $\sim$ 300-attosecond electron slice with transverse orbital angular momentum (TOAM) is initially selected and accelerated by the central spatiotemporal singularity of the STOV laser. This slice then collides with the laser's reflected Gaussian-like front from a planar target, initiating nonlinear Compton scattering and resulting in an isolated, attosecond ($\sim$ 300 as), highly collimated ($\sim$ 4$\degree$), ultra-brilliant ($\sim 5\times 10^{24}$ photons/s/mm$^2$/mrad$^2$/0.1\%BW at 1 MeV) $γ$-ray pulse. This STOV-driven approach overcomes the significant beam divergence and complex two-laser requirements of prior Gaussian-based methods while introducting TOAM to the attosecond $γ$-ray pulse, which opens avenues for ultrafast imaging, nuclear excitation, and detection applications.

physics.plasm-ph

First Proof of Principle Experiment for Muon Production with Ultrashort High Intensity Laser

Muons, which play a crucial role in both fundamental and applied physics, have traditionally been generated through proton accelerators or from cosmic rays. With the advent of ultra-short high-intensity lasers capable of accelerating electrons to GeV levels, it has become possible to generate muons in laser laboratories. In this work, we show the first proof of principle experiment for novel muon production with an ultra-short, high-intensity laser device through GeV electron beam bombardment on a lead converter target. The muon physical signal is confirmed by measuring its lifetime which is the first clear demonstration of laser-produced muons. Geant4 simulations were employed to investigate the photo-production, electro-production, and Bethe-Heitler processes response for muon generation and their subsequent detection. The results show that the dominant contributions of muons are attributed to the photo-production/electro-production and a significant yield of muons up to 0.01 $μ$/$e^-$ out of the converter target could be achieved. This laser muon source features compact, ultra-short pulse and high flux. Moreover, its implementation in a small laser laboratory is relatively straightforward, significantly reducing the barriers to entry for research in areas such as muonic X-ray elemental analysis, muon spin spectroscopy and so on.

physics.acc-ph

Superluminal spacetime boundary, time reflection and quantum light generation from relativistic plasma mirrors

A plasma mirror is an optical device for high-power, ultrashort-wavelength electromagnetic fields, utilizing a sheet of relativistic oscillating electrons to generate and manipulate light. In this work, we propose that the spatiotemporally varying plasma oscillation, induced by an ultra-high-intensity laser beam, functions as a "spacetime mirror" with significant potential for exploring quantum light. We find that the spacetime mirror exhibits several exotic features: (i) a superluminal spacetime boundary, (ii) time reflection and refraction, and (iii) quantum light sources with pair generation. Our theoretical and simulation results are in excellent agreement, and experimental verification is underway. Our work demonstrates the interplay with emerging fields such as time varying media, suggesting the plasma mirror as an ideal platform to study strong-field quantum optics at extremes.

physics.optics