arXiv subjects

Yuya Doi

Publications and source records attributed to Yuya Doi.

9 recordsLinked to original sources

arXiv2024

Dissipative particle dynamics simulation plus slip-springs for entangled polymers with various slip-spring densities

Slip-spring models are valuable tools for simulating entangled polymers, bridging the gap between bead-spring models with excluded volume and network models with presumed reptation motion. This study focuses on the DPD-SS (Dissipative Particle Dynamics - Slip-Spring) model, which introduces slip-springs into the standard DPD polymer model with soft-core interactions. By systematically adjusting the fugacity of slip-springs, the density of slip-springs within the system is varied. Simulation results demonstrate the compatibility of models with different slip-spring densities in terms of diffusion and linear relaxation modulus when the average number of slip-springs per chain is the same. The conversion between DPD-SS models concerning length and time is achieved through Rouse scaling, which utilizes the average number of DPD beads between consecutive anchoring points of slip-springs. Additionally, the modulus conversion is accomplished through the plateau modulus that takes account of fluctuations around entanglement. Notably, diffusion and relaxation modulus from the DPD-SS model align with those reported for standard Kremer-Grest and DPD models featuring strong repulsive interactions.

cond-mat.soft↗

arXiv2023

Modeling for heterogeneous oxidative aging of polymers using coarse-grained molecular dynamics

This study presents a coarse-grained molecular dynamics simulation model to investigate the process of oxidative aging in polymers. The chemical aging effect is attributed to the auto-oxidation mechanism, which is initiated by radicals, leading to the chain scission and crosslinking of polymer chains. In this study, we integrate a thermal oxidation kinetic model in the oxygen excess regime into the Kremer-Grest model, thereby enabling a reactive coarse-grained molecular dynamics simulation to capture the process of oxidative degradation. Our simulation reveals that when the timescale of the characteristic reaction step of oxidative degradation is shorter than the longest relaxation time of polymer chains, the scission sites exhibit spatial heterogeneity. This innovative simulation model possesses the potential to enhance our comprehension of polymer aging phenomena, thus making noteworthy contributions to the realm of polymer science and degradation chemistry.

cond-mat.soft↗

arXiv2023

Phantom-Chain Simulations for the Effect of Node Functionality on the Fracture of Star-Polymer Networks

The influence of node functionality (f) on the fracture of polymer networks remains unclear. While many studies have focused on multi-functional nodes with f>4, recent research suggests that networks with f=3 exhibit superior fracture properties compared to those with f=4. To clarify this discrepancy, we conducted phantom chain simulations for star-polymer networks varying f between 3 and 8. Our simulations utilized equimolar binary mixtures of star branch prepolymers with a uniform arm length. We employed a Brownian dynamics scheme to equilibrate sols and induce gelation through end-linking reactions. We prevented the formation of odd-order loops owing to the binary reaction and second-order loops algorithmically. We stored network structures at various conversion ratios ({\phi}_c) and minimized energy to reduce computation costs induced by structural relaxation. We subjected the networks to stretching until fracture to determine stress and strain at break and work for fracture, {\epsilon}_b, {\sigma}_b, and W_b. These fracture characteristics are highly dependent on {\phi}_c for networks with small f but relatively insensitive for those with large f. Thus, the networks with small f exhibit greater fracture properties than those with large f at high {\phi}_c, whereas the opposite relationship occurs at low {\phi}_c. We analyzed {\epsilon}_b, {\sigma}_b, and W_b concerning the cycle rank {\xi} and the broken strand fraction {\phi}_bb. We found {\epsilon}_b, {\sigma}_b/{\phi}_bb, and W_b/{\phi}_bb monotonically decrease with increasing {\xi}, and the data for various f and {\phi}_c superpose with each other to draw master curves. These results imply that the mechanical superiority of the networks with small f comes from their smaller {\xi} that gives higher {\epsilon}_b, {\sigma}_b/{\phi}_bb, and W_b/{\phi}_bb than the networks with large f.

cond-mat.soft↗

arXiv2023

Extension of Moving Particle Simulation including rotational degrees of freedom for dilute fiber suspension

We develop a novel Moving Particle Simulation (MPS) method to accurately reproduce the motion of fibers floating in sheared liquids. In conventional MPS schemes, if a fiber suspended in a liquid is represented by a one-dimensional array of MPS particles, it is entirely aligned to the flow direction due to the lack of shear stress difference between fiber-liquid interfaces. To address this problem, we employ the micropolar fluid model to introduce rotational degrees of freedom into the MPS particles. The translational motion of liquid and solid particles and the rotation of solid particles are calculated with the explicit MPS algorithm. The fiber is modeled as an array of micropolar fluid particles bonded with stretching and bending potentials. The motion of a single rigid fiber is simulated in a three-dimensional shear flow generated between two moving solid walls. We show that the proposed method is capable of reproducing the fiber motion predicted by Jeffery's theory being different from the conventional MPS simulations.

physics.flu-dyn↗

arXiv2023

Increase in rod diffusivity emerges even in Markovian nature

Rod-shaped particles embedded in certain matrices have been reported to exhibit an increase in their center of mass diffusivity upon increasing the matrix density. This increase has been considered to be caused by a kinetic constraint in analogy with tube models. We investigate a mobile rod-like particle in a sea of immobile point obstacles using a kinetic Monte Carlo scheme equipped with a Markovian process, that generates gas-like collision statistics, so that such kinetic constraints do essentially not exist. Even in such a system, provided the particle's aspect ratio exceeds a threshold value of about 24, the unusual increase in the rod diffusivity emerges. This result implies that the kinetic constraint is not a necessary condition for the increase in the diffusivity.

cond-mat.stat-mech↗

arXiv2022

Fluctuating Diffusivity Emerges even in Binary Gas Mixtures

Diffusivity in some soft matter and biological systems changes with time, called the fluctuating diffusivity. In this work, we propose a novel origin for fluctuating diffusivity based on stochastic simulations of binary gas mixtures. In this system, the fraction of one component is significantly small, and the mass of the minor component molecule is different from that of the major component. The minor component exhibits fluctuating diffusivity when its mass is sufficiently smaller than that of the major component. We elucidate that this fluctuating diffusivity is caused by the time scale separation between the relaxation of the velocity direction and the speed of the minor component molecule.

cond-mat.stat-mech↗

arXiv2022

Stress Tensor of Single Rigid Dumbbell by Virtual Work Method

We derive the stress tensor of a rigid dumbbell by using the virtual work method. In the virtual work method, we virtually apply a small deformation to the system, and relate the change of the energy to the work done by the stress tensor. A rigid dumbbell consists of two particles connected by a rigid bond of which length is constant (the rigid constraint). The energy of the rigid dumbbell consists only on the kinetic energy. Also, only the deformations which do not violate the rigid constraint are allowed. Thus we need the dynamic equations which is consistent with the rigid constraint to apply the virtual deformation. We rewrite the dynamic equations for the underdamped SLLOD-type dynamic equations into the forms which are consistent with the rigid constraint. Then we apply the virtual deformation to a rigid dumbbell based on the obtained dynamic equations. We derive the stress tensor for the rigid dumbbell model from the change of the kinetic energy. Finally, we take the overdamped limit and derive the stress tensor and the dynamic equation for the overdamped rigid dumbbell. We show that the Green-Kubo type linear response formula can be reproduced by combining the stress tensor and the dynamic equation at the overdamped limit.

cond-mat.soft↗

arXiv2022

Effects of attractive inter-particle interaction on cross-transport coefficient between mass and heat in binary fluids

In some binary fluids, mass transport is observed under a temperature gradient. This phenomenon is called the Soret effect. In this study, we discuss the influence of inter-particle interaction. We considered equimolar binary Lennard-Jones fluids with a mass contrast, whereas the interaction was common for all the particle pairs with various cut-off lengths. We performed molecular dynamics simulations of such fluids under equilibrium to obtain the cross-transport coefficients L1q between the fluxes of mass and heat. The simulation revealed that this quantity strongly depends on the cut-off length. Further, we decomposed the heat flux into kinetic and potential contributions and calculated the cross-correlations between decomposed fluxes and the mass flux. The result indicates that the potential contribution dominates L1q, implying that the Soret coefficient is altered by the inter-particle interaction.

cond-mat.stat-mech↗

arXiv2020

Multi-chain slip-spring simulations with various slip-spring densities

Although it has been established that the multi-chain slip-spring (MCSS) model can reproduce entangled polymer dynamics, the effects of model parameters have not been fully elucidated yet. In this study, we systematically investigated the effects of slip-spring density. For the diffusion and the linear viscoelasticity, the simulation results exhibited universality. Namely, the results from the simulations with various slip-spring densities can be superposed with each other by the conversion factors for the bead number per chain, unit of length, unit of time, and modulus. The diffusion and the viscoelasticity were in good agreement with the literature data for the standard bead-spring simulations, including the molecular weight dependence. The universality among the MCSS simulations with various slip-spring density also held under mild shear if the slip-spring density was not significantly high. The results imply that the level of coarse-graining for the MCSS model can be arbitrarily chosen as in the Rouse model.

cond-mat.soft↗