Searcharxiv⌕ Search

arXiv subjects

Z. Yang

Publications and source records attributed to Z. Yang.

At least 91 records · Page 5Linked to original sources
arXiv2017

Tunable Extremely Asymmetric Acoustic Metasurfaces Made by Coupled Membrane Resonators

We report the experimental demonstration of tunable asymmetric acoustic metasurfaces with extreme contrast, made by two decorated membrane resonators (DMRs) coupled via a sealed air column. The front side of the metasurface is impedance matched to air and perfectly absorbing, while the backside is hard and totally reflecting. When a suitable DC voltage is applied to the backside DMR with proper electrodes, the surface impedance of the back side of the metasurfaces can be tuned from one extreme to the other, such that the backside becomes impedance matched to air and totally absorbing, while the front side becomes perfectly reflecting. The metasurface also exhibits high transmission contrast around two frequencies. The tunability of the reflection is over 23 dB at 388 Hz, and that of the transmission is over 33 dB at 240 Hz and 590 Hz with 600 V of applied voltage. We further demonstrate one-side impedance matched metasurface with tunable working frequency 324.2 Hz to 335 Hz and reflection contrast over 31 dB.

physics.app-ph↗
arXiv2017

Revealing large-scale homogeneity and trace impurity sensitivity of GaAs nanoscale membranes

III-V nanostructures have the potential to revolutionize optoelectronics and energy harvesting. For this to become a reality, critical issues such as reproducibility and sensitivity to defects should be resolved. By discussing the optical properties of MBE grown GaAs nanomembranes we highlight several features that bring them closer to large scale applications. Uncapped membranes exhibit a very high optical quality, expressed by extremely narrow neutral exciton emission, allowing the resolution of the more complex excitonic structure for the first time. Capping of the membranes with an AlGaAs shell results in a strong increase of emission intensity but also to a shift and broadening of the exciton peak. This is attributed to the existence of impurities in the shell, beyond MBE-grade quality, showing the high sensitivity of these structures to the presence of impurities. Finally, emission properties are identical at the sub-micron and sub-millimeter scale, demonstrating the potential of these structures for large scale applications.

cond-mat.mes-hall↗
arXiv2017

Wave Manipulations by Coherent Perfect Channeling

We report experimental and theoretical investigations of coherent perfect channeling (CPC), a process that two incoming coherent waves in waveguides are completely channeled into one or two other waveguides with little energy dissipation via strong coherent interaction between the two waves mediated by a deep subwavelength dimension scatterer at the common junction of the waveguides. Two such scatterers for acoustic waves are discovered, one confirmed by experiments and the other predicted by theory, and their scattering matrices are formulated. Scatterers with other CPC scattering matrices are explored, and preliminary investigations of their properties are conducted. The scattering matrix formulism makes it possible to extend the applicable domain of CPC to other scalar waves, such as electromagnetic waves and quantum wavefunctions.

physics.class-ph↗
arXiv2017

Heavy-ion Physics at a Fixed-Target Experiment Using the LHC Proton and Lead Beams (AFTER@LHC): Feasibility Studies for Quarkonium and Drell-Yan Production

We outline the case for heavy-ion-physics studies using the multi-TeV lead LHC beams in the fixed-target mode. After a brief contextual reminder, we detail the possible contributions of AFTER@LHC to heavy-ion physics with a specific emphasis on quarkonia. We then present performance simulations for a selection of observables. These show that $Υ(nS)$, $J/ψ$ and $ψ(2S)$ production in heavy-ion collisions can be studied in new energy and rapidity domains with the LHCb and ALICE detectors. We also discuss the relevance to analyse the Drell-Yan pair production in asymmetric nucleus-nucleus collisions to study the factorisation of the nuclear modification of partonic densities and of further quarkonia to restore their status of golden probes of the quark-gluon plasma formation.

nucl-ex↗
arXiv2016

A Base Camp for Scaling AI

Modern statistical machine learning (SML) methods share a major limitation with the early approaches to AI: there is no scalable way to adapt them to new domains. Human learning solves this in part by leveraging a rich, shared, updateable world model. Such scalability requires modularity: updating part of the world model should not impact unrelated parts. We have argued that such modularity will require both "correctability" (so that errors can be corrected without introducing new errors) and "interpretability" (so that we can understand what components need correcting). To achieve this, one could attempt to adapt state of the art SML systems to be interpretable and correctable; or one could see how far the simplest possible interpretable, correctable learning methods can take us, and try to control the limitations of SML methods by applying them only where needed. Here we focus on the latter approach and we investigate two main ideas: "Teacher Assisted Learning", which leverages crowd sourcing to learn language; and "Factored Dialog Learning", which factors the process of application development into roles where the language competencies needed are isolated, enabling non-experts to quickly create new applications. We test these ideas in an "Automated Personal Assistant" (APA) setting, with two scenarios: that of detecting user intent from a user-APA dialog; and that of creating a class of event reminder applications, where a non-expert "teacher" can then create specific apps. For the intent detection task, we use a dataset of a thousand labeled utterances from user dialogs with Cortana, and we show that our approach matches state of the art SML methods, but in addition provides full transparency: the whole (editable) model can be summarized on one human-readable page. For the reminder app task, we ran small user studies to verify the efficacy of the approach.

cs.AI↗
arXiv2016

Finite element method for nonlinear Riesz space fractional diffusion equations on irregular domains

In this paper, we consider two-dimensional Riesz space fractional diffusion equations with nonlinear source term on convex domains. Applying Galerkin finite element method in space and backward difference method in time, we present a fully discrete scheme to solve Riesz space fractional diffusion equations. Our breakthrough is developing an algorithm to form stiffness matrix on unstructured triangular meshes, which can help us to deal with space fractional terms on any convex domain. The stability and convergence of the scheme are also discussed. Numerical examples are given to verify accuracy and stability of our scheme.

math.NA↗
arXiv2016

Hybrid membrane resonators for multiple frequency asymmetric absorption and reflection in large waveguide

We report that Hybrid membrane resonators (HMRs) made of a decorated membrane resonator backed by a shallow cavity can function as Helmholtz resonators (HRs) when mounted on the sidewall of a clear waveguide for air ventilation. When two single-frequency HMRs are used in the same scheme as two frequency-detuned HRs, asymmetric total absorption/reflection is demonstrated at 286.7 Hz with absorption coefficient over 97 % in a waveguide 9 cm x 9 cm in cross section. When two multiple-frequency HMRs are used, absorption in the range of near 60 % to above 80 % is observed at 403 Hz, 450 Hz, 688 Hz, 863 Hz and 945 Hz. Theoretical predictions agree well with the experimental data. The HMRs may replace HRs in duct noise reduction applications in that at a single operation frequency they have stronger strength to cover a much larger cross section area than that of HRs with similar cavity volume, and they can be designed to provide multiple frequency absorption band.

physics.class-ph↗
arXiv2016

Spatially resolved studies of the phases and morphology of methylammonium and formamidinium lead tri-halide perovskites

The family of organic-inorganic tri-halide perovskites including MA (MethylAmmonium)PbI$_{3}$, MAPbI$_{3-x}$Cl$_{x}$, FA (FormAmidinium)PbI$_{3}$ and FAPbBr$_{3}$ are having a tremendous impact on the field of photovoltaic cells due to their ease of deposition and efficiencies, but device performance can be significanly affected by inhomogeneities. Here we report a study of temperature dependent micro-photoluminescence which shows a strong spatial inhomogeneity related to the presence of microcrystalline grains, which can be both light and dark. In all of the tri-iodide based materials there is evidence that the tetragonal to orthorhombic phase transition observed around 160K does not occur uniformly across the sample with domain formation related to the underlying microcrystallite grains, some of which remain in the high temperature, tetragonal, phase even at very low temperatures. At low temperature the tetragonal domains can be significantly influenced by local defects in the layers. In FAPbBr$_{3}$ a more macroscopic domain structure is observed with large numbers of grains forming phase correlated regions.

cond-mat.mtrl-sci↗
arXiv2016

Collective spin excitations in bi-component magnonic crystals consisting of bi-layer Permalloy/Fe nanowires

In the developing field of magnonics,it is very important to achieve tailoring of spin wave propagation by both a proper combination of materials with different magnetic properties and their nanostructuring on the submicrometric scale. We have exploited deep ultra-violet lithography, in combination with tilted shadow deposition technique, to fabricate arrays of closely spaced bi-layer nanowires (NWs), with separation d=100 nm and periodicity a=440 nm, having bottom and top layers made of Permalloy and Iron, respectively. The NWs have either rectangular cross section (bottom and upper layers of equal width) or L-shaped cross section (upper layer of half width). The frequency dispersion of collective spin wave excitations in the above bi-layered NWs arrays has been measured by the Brillouin light scattering technique while sweeping the wave vector perpendicularly to the wire length over three Brillouin zones of the reciprocal space. For the rectangular NWs, the lowest frequency fundamental mode, characterized by a quasi- uniform profile of the amplitude of the dynamic magnetization across the NW width, exhibits a sizeable and periodic frequency dispersion. A similar dispersive mode is also present in L-shaped NWs, but the mode amplitude is concentrated in the thin side of the NWs. The width and the center frequency of the magnonic band associated with the above fundamental modes has been analyzed, showing that both can be tuned by varying the external applied field. Moreover, for the L-shaped NWs it is shown that there is also a second dispersive mode,at higher frequency,characterized by an amplitude concentrated in the thick side of the NW. These experimental results have been quantitatively reproduced by an original numerical model that includes two-dimensional Green's function of the dipole field of the dynamic magnetization and interlayer exchange coupling between the layers.

cond-mat.mtrl-sci↗
arXiv2016

Resistive Plate Chamber Digitization in a Hadronic Shower Environment

The CALICE Semi-Digital Hadron Calorimeter (SDHCAL) technological prototype is a sampling calorimeter using Glass Resistive Plate Chamber detectors with a three-threshold readout as the active medium. This technology is one of the two options proposed for the hadron calorimeter of the International Large Detector for the International Linear Collider. The prototype was exposed to beams of muons, electrons and pions of different energies at the CERN Super Proton Synchrotron. To be able to study the performance of such a calorimeter in future experiments it is important to ensure reliable simulation of its response. In this paper we present our prototype simulation performed with GEANT4 and the digitization procedure achieved with an algorithm called SimDigital. A detailed description of this algorithm is given and the methods to determinate its parameters using muon tracks and electromagnetic showers are explained. The comparison with hadronic shower data shows a good agreement up to 50 GeV. Discrepancies are observed at higher energies. The reasons for these differences are investigated.

physics.ins-det↗
arXiv2016

First results of the CALICE SDHCAL technological prototype

The CALICE Semi-Digital Hadronic Calorimeter (SDHCAL) prototype, built in 2011, was exposed to beams of hadrons, electrons and muons in two short periods in 2012 on two different beam lines of the CERN SPS. The prototype with its 48 active layers, made of Glass Resistive Plate Chambers and their embedded readout electronics, was run in triggerless and power-pulsing mode. The performance of the SDHCAL during the test beam was found to be very satisfactory with an efficiency exceeding 90% for almost all of the 48 active layers. A linear response (within 5%) and a good energy resolution are obtained for a large range of hadronic energies (5-80GeV) by applying appropriate calibration coefficients to the collected data for both the Digital (Binary) and the Semi-Digital (Multi-threshold) modes of the SDHCAL prototype. The Semi-Digital mode shows better performance at energies exceeding 30GeV

physics.ins-det↗
arXiv2016

Physics case for a polarised target for AFTER@LHC

We review a number of ideas put forward in favour of the use of a polarised target along with the proposed idea of a fixed-target experiment using the LHC beams -- AFTER@LHC. A number of recent studies have shown that single transverse-spin asymmetries (STSAs) are large enough to be precisely measured in the region accessible with AFTER@LHC, in particular as regards the Drell-Yan process as well as single-pion, isolated-photon and jet production. AFTER@LHC with a polarised target would also be the ideal experimental set-up to measure the gluon Sivers effect via a number of original quarkonium STSA studies. We discuss first figures-of-merit based on simulations for AFTER@LHC with a polarised target.

nucl-ex↗
arXiv2015

Microwave magnetic dynamics in ferromagnetic metallic nanostructures lacking inversion symmetry

In this work we carried out systematic experimental and theoretical investigations of the ferromagnetic (FMR) response of quasi-two-dimensional magnetic nano-objects - microscopically long nanostripes made of ferromagentic metals. We were interested in the impact of the symmetries of this geometry on the FMR response. Three possible scenarios, from which the inversion symmetry break originated, were investigated:(1) from the shape of the stripe cross-section, (2) from the double-layer structure of the stripes with exchange coupling between the layers, and (3) from the single-side incidence of the microwave magnetic field on the plane of the nano-pattern. The latter scenario is characteristic of the stripline FMR configuration. It was found that the combined effect of the three symmetry breaks is much stronger than the impacts of each of these symmetry breaks separately.

cond-mat.mtrl-sci↗
arXiv2015

Testing Hadronic Interaction Models using a Highly Granular Silicon-Tungsten Calorimeter

A detailed study of hadronic interactions is presented using data recorded with the highly granular CALICE silicon-tungsten electromagnetic calorimeter. Approximately 350,000 selected negatively charged pion events at energies between 2 and 10 GeV have been studied. The predictions of several physics models available within the Geant4 simulation tool kit are compared to this data. A reasonable overall description of the data is observed; the Monte Carlo predictions are within 20% of the data, and for many observables much closer. The largest quantitative discrepancies are found in the longitudinal and transverse distributions of reconstructed energy.

physics.ins-det↗
arXiv2015

Studies of Transverse-Momentum-Dependent distributions with A Fixed-Target ExpeRiment using the LHC beams (AFTER@LHC)

We report on the studies of Transverse-Momentum-Dependent distributions (TMDs) at a future fixed-target experiment --AFTER@LHC-- using the $p^+$ or Pb ion LHC beams, which would be the most energetic fixed-target experiment ever performed. AFTER@LHC opens new domains of particle and nuclear physics by complementing collider-mode experiments, in particular those of RHIC and the EIC projects. Both with an extracted beam by a bent crystal or with an internal gas target, the luminosity achieved by AFTER@LHC surpasses that of RHIC by up to 3 orders of magnitude. With an unpolarised target, it allows for measurements of TMDs such as the Boer-Mulders quark distributions and the distribution of unpolarised and linearly polarised gluons in unpolarised protons. Using polarised targets, one can access the quark and gluon Sivers TMDs through single transverse-spin asymmetries in Drell-Yan and quarkonium production. In terms of kinematics, the fixed-target mode combined with a detector covering $η_{\rm lab} \in [1,5]$ allows one to measure these asymmetries at large $x^\uparrow$ in the polarised nucleon.

nucl-ex↗
arXiv2014

Non-uniform Spatial Distribution of Spin Polarization in Topological Insulator (Bi2Te3) Surface

We found, through extensive study of micro reflectance difference spectroscopy images of Bi2Te3 topological insulator surface, the first clear experimental evidence that there is non-uniform spatial distribution of spin polarization (spin domains) in the surface of the topological insulator. These spin domains involve when they are at different temperatures, in an external magnetic field, and can be driven by electric current. Such surface spin domains in topological insulators have never been predicted by any theory so far.

cond-mat.mes-hall↗
arXiv2014

Rubbery layer on polystyrene surface well below the glassy temperature

The dynamics of polymer surfaces is a controversial subject. Many experimental evidences support the existence of a surface mobile layer, while there are a few equally strong experimental evidences that contradict it. Here we show, through careful studies of the topological evolution of nanometer-size ridges and ditches on rubbed polystyrene surfaces, that there is indeed a surface rubbery layer whose mobility decreases rapidly with depth. The segments in the layer can only be displaced by a finite distance comparable to the depth. The temperature and depth dependence of the surface effective compliance is quantitatively determined. At tens of degrees below the bulk glass transition temperature the thickness of the surface rubbery layer is only a fraction of nanometer while the rest of the polymer sample remains frozen. Such surface mobile layer can qualitatively explain the seemingly contradictory behaviors of polymer surfaces and resolve most of the controversy among the results obtained from different experimental approaches.

cond-mat.mtrl-sci↗