Searcharxiv⌕ Search

arXiv subjects

Z. Zhang

Publications and source records attributed to Z. Zhang.

At least 73 records · Page 4Linked to original sources
arXiv2024

Flattening-off of droplet bouncing trend under high ambient gas pressures

It was previously observed that colliding liquid droplets in a gaseous medium tend to bounce off at elevated gas pressure up to about 12 atm. In this letter, we extended the droplet collision experiment to up to 41 atm for the first time and reported a noticeable discovery that the tendency is flattened off at higher pressures. The colliding droplets stop bouncing but start to coalesce beyond a critical Weber number, which increases with pressure but tends to a limit value at 21 atm and above. A scaling analysis taking into account the gas-film dynamics, the rarefied gas effects, and van der Waals force well correlates with the experimental discovery.

physics.flu-dyn↗
arXiv2024

Characterisation of resistive MPGDs with 2D readout

Micro-Pattern Gaseous Detectors (MPGDs) with resistive anode planes provide intrinsic discharge robustness while maintaining good spatial and time resolutions. Typically read out with 1D strips or pad structures, here the characterisation results of resistive anode plane MPGDs with 2D strip readout are presented. A uRWELL prototype is investigated in view of its use as a reference tracking detector in a future gaseous beam telescope. A MicroMegas prototype with a fine-pitch mesh (730 line-pairs-per-inch) is investigated, both for comparison and to profit from the better field uniformity and thus the ability to operate the detector more stable at high gains. Furthermore, the measurements are another application of the RD51 VMM3a/SRS electronics.

physics.ins-det↗
arXiv2023

The First GECAM Observation Results on Terrestrial Gamma-ray Flashes and Terrestrial Electron Beams

Gravitational-wave high-energy Electromagnetic Counterpart All-sky Monitor (GECAM) is a space-borne instrument dedicated to monitoring high-energy transients, including Terrestrial Gamma-ray Flashes (TGFs) and Terrestrial Electron Beams (TEBs). We implemented a TGF/TEB search algorithm for GECAM, with which 147 bright TGFs, 2 typical TEBs and 2 special TEB-like events are identified during an effective observation time of $\sim$9 months. We show that, with gamma-ray and charged particle detectors, GECAM can effectively identify and distinguish TGFs and TEBs, and measure their temporal and spectral properties in detail. A very high TGF-lightning association rate of $\sim$80\% is obtained between GECAM and GLD360 in east Asia region.

astro-ph.HE↗
arXiv2023

The Lobster Eye Imager for Astronomy Onboard the SATech-01 Satellite

The Lobster Eye Imager for Astronomy (LEIA), a pathfinder of the Wide-field X-ray Telescope of the Einstein Probe (EP) mission, was successfully launched onboard the SATech-01 satellite of the Chinese Academy of Sciences on 27 July 2022. In this paper, we introduce the design and on-ground test results of the LEIA instrument. Using state-of-the-art Micro-Pore Optics (MPO), a wide field-of-view (FoV) of 346 square degrees (18.6 degrees * 18.6 degrees) of the X-ray imager is realized. An optical assembly composed of 36 MPO chips is used to focus incident X-ray photons, and four large-format complementary metal-oxide semiconductor (CMOS) sensors, each of 6 cm * 6 cm, are used as the focal plane detectors. The instrument has an angular resolution of 4 - 8 arcmin (in FWHM) for the central focal spot of the point spread function, and an effective area of 2 - 3 cm2 at 1 keV in essentially all the directions within the field of view. The detection passband is 0.5 - 4 keV in the soft X-rays and the sensitivity is 2 - 3 * 10-11 erg s-1 cm-2 (about 1 mini-Crab) at 1,000 second observation. The total weight of LEIA is 56 kg and the power is 85 W. The satellite, with a design lifetime of 2 years, operates in a Sun-synchronous orbit of 500 km with an orbital period of 95 minutes. LEIA is paving the way for future missions by verifying in flight the technologies of both novel focusing imaging optics and CMOS sensors for X-ray observation, and by optimizing the working setups of the instrumental parameters. In addition, LEIA is able to carry out scientific observations to find new transients and to monitor known sources in the soft X-ray band, albeit limited useful observing time available.

astro-ph.IM↗
arXiv2023

The Euclidean Adler Function and its Interplay with $Δα^{\mathrm{had}}_{\mathrm{QED}}$ and $α_s$

Three different approaches to precisely describe the Adler function in the Euclidean regime at around $2\, \mathrm{GeVs}$ are available: dispersion relations based on the hadronic production data in $e^+e^-$ annihilation, lattice simulations and perturbative QCD (pQCD). We make a comprehensive study of the perturbative approach, supplemented with the leading power corrections in the operator product expansion. All known contributions are included, with a careful assessment of uncertainties. The pQCD predictions are compared with the Adler functions extracted from $Δα^{\mathrm{had}}_{\mathrm{QED}}(Q^2)$, using both the DHMZ compilation of $e^+e^-$ data and published lattice results. Taking as input the FLAG value of $α_s$, the pQCD Adler function turns out to be in good agreement with the lattice data, while the dispersive results lie systematically below them. Finally, we explore the sensitivity to $α_s$ of the direct comparison between the data-driven, lattice and QCD Euclidean Adler functions. The precision with which the renormalisation group equation can be tested is also evaluated.

hep-ph↗
arXiv2023

The catalog-to-cosmology framework for weak lensing and galaxy clustering for LSST

We present TXPipe, a modular, automated and reproducible pipeline for ingesting catalog data and performing all the calculations required to obtain quality-assured two-point measurements of lensing and clustering, and their covariances, with the metadata necessary for parameter estimation. The pipeline is developed within the Rubin Observatory Legacy Survey of Space and Time (LSST) Dark Energy Science Collaboration (DESC), and designed for cosmology analyses using LSST data. In this paper, we present the pipeline for the so-called 3x2pt analysis -- a combination of three two-point functions that measure the auto- and cross-correlation between galaxy density and shapes. We perform the analysis both in real and harmonic space using TXPipe and other LSST-DESC tools. We validate the pipeline using Gaussian simulations and show that it accurately measures data vectors and recovers the input cosmology to the accuracy level required for the first year of LSST data under this simplified scenario. We also apply the pipeline to a realistic mock galaxy sample extracted from the CosmoDC2 simulation suite (Korytov et al. 2019). TXPipe establishes a baseline framework that can be built upon as the LSST survey proceeds. Furthermore, the pipeline is designed to be easily extended to science probes beyond the 3x2pt analysis.

astro-ph.CO↗
arXiv2023

Two superconducting states with broken time-reversal symmetry in FeSe1-xSx

Iron-chalcogenide superconductors FeSe$_{1-x}$S$_x$ possess unique electronic properties such as non-magnetic nematic order and its quantum critical point. The nature of superconductivity with such nematicity is important for understanding the mechanism of unconventional superconductivity. A recent theory suggested the possible emergence of a fundamentally new class of superconductivity with the so-called Bogoliubov Fermi surfaces (BFSs) in this system. However, such an {\em ultranodal} pair state requires broken time-reversal symmetry (TRS) in the superconducting state, which has not been observed experimentally. Here we report muon spin relaxation ($μ$SR) measurements in FeSe$_{1-x}$S$_x$ superconductors for $0\le x \le 0.22$ covering both orthorhombic (nematic) and tetragonal phases. We find that the zero-field muon relaxation rate is enhanced below the superconducting transition temperature $T_{\rm c}$ for all compositions, indicating that the superconducting state breaks TRS both in the nematic and tetragonal phases. Moreover, the transverse-field $μ$SR measurements reveal that the superfluid density shows an unexpected and substantial reduction in the tetragonal phase ($x>0.17$). This implies that a significant fraction of electrons remain unpaired in the zero-temperature limit, which cannot be explained by the known unconventional superconducting states with point or line nodes. The time-reversal symmetry breaking and the suppressed superfluid density in the tetragonal phase, together with the reported enhanced zero-energy excitations, are consistent with the ultranodal pair state with BFSs. The present results reveal two different superconducting states with broken TRS separated by the nematic critical point in FeSe$_{1-x}$S$_x$, which calls for the theory of microscopic origins that account for the relation between the nematicity and superconductivity.

cond-mat.supr-con↗
arXiv2023

Observation of Wigner cusps in a metallic carbon nanotube

Previous gate-dependent conductance measurements of metallic carbon nanotubes have revealed unexplainable conductance suppressions, occurring at two different gate voltages. These were previously attributed to the gate-dependency of contact resistance. Our gate-dependent conductivity measurements on a metallic nanotube with known chirality show that these bimodal conductance suppressions are the manifestations of Wigner cusps, often seen in atomic and nuclear physics experiments.

cond-mat.mes-hall↗
arXiv2023

Reanalysis of the X-ray burst associated FRB 200428 with Insight-HXMT observations

A double-peak X-ray burst from the Galactic magnetar SGR J1935+2154 was discovered as associated with the two radio pulses of FRB 200428 separated by 28.97+-0.02 ms. Precise measurements of the timing and spectral properties of the X-ray bursts are helpful for understanding the physical origin of fast radio bursts (FRBs). In this paper, we have reconstructed some information about the hard X-ray events, which were lost because the High Energy X-ray Telescope (HE) onboard the Insight-HXMT mission was saturated by this extremely bright burst, and used the information to improve the temporal and spectral analyses of the X-ray burst. The arrival times of the two X-ray peaks by fitting the new Insight-HXMT/HE lightcurve with multi-Gaussian profiles are 2.77+-0.45 ms and 34.30+-0.56 ms after the first peak of FRB 200428, respectively, while these two parameters are 2.57+-0.52 ms and 32.5+-1.4 ms if the fitting profile is a fast rise and exponential decay function. The spectrum of the two X-ray peaks could be described by a cutoff power-law with cutoff energy ~60 keV and photon index ~1.4, the latter is softer than that of the underlying bright and broader X-ray burst when the two X-ray peaks appeared.

astro-ph.HE↗
arXiv2022

Precise timing and recent advancements with segmented anode PICOSEC Micromegas prototypes

Timing information in current and future accelerator facilities is important for resolving objects (particle tracks, showers, etc.) in extreme large particles multiplicities on the detection systems. The PICOSEC Micromegas detector has demonstrated the ability to time 150\,GeV muons with a sub-25\,ps precision. Driven by detailed simulation studies and a phenomenological model which describes stochastically the dynamics of the signal formation, new PICOSEC designs were developed that significantly improve the timing performance of the detector. PICOSEC prototypes with reduced drift gap size ($\sim$\SI{119}{\micro\metre}) achieved a resolution of 45\,ps in timing single photons in laser beam tests (in comparison to 76\,ps of the standard PICOSEC detector). Towards large area detectors, multi-pad PICOSEC prototypes with segmented anodes has been developed and studied. Extensive tests in particle beams revealed that the multi-pad PICOSEC technology provides also very precise timing, even when the induced signal is shared among several neighbouring pads. Furthermore, new signal processing algorithms have been developed, which can be applied during data acquisition and provide real time, precise timing.

physics.ins-det↗
arXiv2022

First wide field-of-view X-ray observations by a lobster eye focusing telescope in orbit

As a novel X-ray focusing technology, lobster eye micro-pore optics (MPO) feature both a wide observing field of view and true imaging capability, promising sky monitoring with significantly improved sensitivity and spatial resolution in soft X-rays. Since first proposed by Angel (1979), the optics have been extensively studied, developed and trialed over the past decades. In this Letter, we report on the first-light results from a flight experiment of the Lobster Eye Imager for Astronomy ($LEIA$), a pathfinder of the wide-field X-ray telescope of the Einstein Probe mission. The piggyback imager, launched in July 2022, has a mostly un-vignetted field of view of $18.6^\circ \times 18.6^\circ $. Its spatial resolution is in the range of 4$-$7 arcmin in FWHM and the focal spot effective area is 2$-$3 cm$^2$, both showing only mild fluctuations across the field of view. We present images of the Galactic center region, Sco X-1 and the diffuse Cygnus Loop nebular taken in snapshot observations over 0.5$-$4 keV. These are truly wide-field X-ray images of celestial bodies observed, for the first time, by a focusing imaging telescope. Initial analyses of the in-flight data show excellent agreement between the observed images and the on-ground calibration and simulations. The instrument and its characterization are briefly described, as well as the flight experiment. The results provide a solid basis for the development of the present and proposed wide-field X-ray missions using lobster eye MPO.

astro-ph.HE↗
arXiv2022

Notch Fracture predictions using the Phase Field method for Ti-6Al-4V produced by Selective Laser Melting after different post-processing conditions

Ti-6Al-4V is a titanium alloy with excellent properties for lightweight applications and its production through Additive Manufacturing processes is attractive for different industrial sectors. In this work, the influence of mechanical properties on the notch fracture resistance of Ti-6Al-4V produced by Selective Laser Melting is numerically investigated. Literature data is used to inform material behaviour. The as-built brittle behaviour is compared to the enhanced ductile response after heat treatment (HT) and hot isostatic pressing (HIP) post-processes. A Phase Field framework is adopted to capture damage nucleation and propagation from two different notch geometries and a discussion on the influence of fracture energy and the characteristic length is carried out. In addition, the influence of oxygen uptake is analysed by reproducing non-inert atmospheres during HT and HIP, showing that oxygen shifts fracture to brittle failures due to the formation of an alpha case layer, especially for the V-notch geometry. Results show that a pure elastic behaviour can be assumed for the as-built SLM condition, whereas elastic-plastic phenomena must be modelled for specimens subjected to heat treatment or hot isostatic pressing. The present brittle Phase Field framework coupled with an elastic-plastic constitutive analysis is demonstrated to be a robust prediction tool for notch fracture after different post-processing routes.

cond-mat.mtrl-sci↗
arXiv2022

Pre-launch characterization of the spectrometer of Hard X-ray Imager (HXI) onboard the ASO-S mission

As one of the three payloads of the Advanced Space-based Solar Observatory (ASO-S), the pre-launch characterization of HXI includes the characterization of the collimator and the spectrometer. This article focuses on the pre-launch characterization of HXI's spectrometer, including detection efficiency, energy resolution, and energy to ADC channel (E-C) relationship. The detection efficiency characterization necessitates a sufficient number of calibrated energy points in the HXI observation energy range, with a refined measurement around the absorption edge of the lanthanum bromide crystal, and is calibrated with an X-ray beam. The characterization results are consistent with the simulations and show that the detection efficiency difference between detector modules is controlled within $\pm3\%$. Radioactive sources $^{133}\textrm{Ba}$ and $^{137}\textrm{Cs}$ are used to calibrate the energy resolution and E-C relationship. The characterization results show that all detector modules' energy resolutions are better than $26\%$ at 32 keV, meeting the design specification. And their E-C relationships vary regularly with voltage. All of the characterization results indicate that the flight model of the HXI spectrometer meets the performance requirements and is capable of performing on-orbit observation activities.

physics.ins-det↗
arXiv2022

Snowmass 2021 White Paper Instrumentation Frontier 05 -- White Paper 1: MPGDs: Recent advances and current R&D

This paper will review the origins, development, and examples of new versions of Micro-Pattern Gas Detectors. The goal for MPGD development was the creation of detectors that could cost-effectively cover large areas while offering excellent position and timing resolution, and the ability to operate at high incident particle rates. The early MPGD developments culminated in the formation of the RD51 collaboration which has become the critical organization for the promotion of MPGDs and all aspects of their production, characterization, simulation, and uses in an expanding array of experimental configurations. For the Snowmass 2021 study, a number of Letters of Interest were received that illustrate ongoing developments and expansion of the use of MPGDs. In this paper, we highlight high precision timing, high rate application, trigger capability expansion of the SRS readout system, and a structure designed for low ion backflow.

physics.ins-det↗
arXiv2022

Cosmological Constraints from DES Y1 Cluster Abundances and SPT Multi-wavelength data

We perform a joint analysis of the counts of redMaPPer clusters selected from the Dark Energy Survey (DES) Y1 data and multi-wavelength follow-up data collected within the 2500 deg$^2$ South Pole Telescope (SPT) SZ survey. The SPT follow-up data, calibrating the richness--mass relation of the optically selected redMaPPer catalog, enable the cosmological exploitation of the DES cluster abundance data. To explore possible systematics related to the modeling of projection effects, we consider two calibrations of the observational scatter on richness estimates: a simple Gaussian model which account only for the background contamination (BKG), and a model which further includes contamination and incompleteness due to projection effects (PRJ). Assuming either a $Λ$CDM+$\sum m_ν$ or $w$CDM+$\sum m_ν$ cosmology, and for both scatter models, we derive cosmological constraints consistent with multiple cosmological probes of the low and high redshift Universe, and in particular with the SPT cluster abundance data. This result demonstrates that the DES Y1 and SPT cluster counts provide consistent cosmological constraints, if the same mass calibration data set is adopted. It thus supports the conclusion of the DES Y1 cluster cosmology analysis which interprets the tension observed with other cosmological probes in terms of systematics affecting the stacked weak lensing analysis of optically--selected low--richness clusters. Finally, we analyse the first combined optically-SZ selected cluster catalogue obtained by including the SPT sample above the maximum redshift probed by the DES Y1 redMaPPer sample. Besides providing a mild improvement of the cosmological constraints, this data combination serves as a stricter test of our scatter models: the PRJ model, providing scaling relations consistent between the two abundance and multi-wavelength follow-up data, is favored over the BKG model.

astro-ph.CO↗
arXiv2021

The intrinsic (trap-free) transistors based on perovskite single crystals with self-passivated surfaces

Lead-halide perovskites emerged as novel semiconducting materials suitable for a variety of optoelectronic applications. However, fabrication of reliable perovskite field-effect transistors (FETs), the devices necessary for the fundamental and applied research on charge transport properties of this class of materials, has proven challenging. Here we demonstrate high-performance perovskite FETs based on epitaxial, single crystalline thin films of cesium lead bromide (CsPbBr3). An improved vapor-phase epitaxy has allowed growing truly large-area, atomically flat films of this perovskite with excellent structural and surface properties. FETs based on these CsPbBr3 films exhibit textbook transistor characteristics, with a very low hysteresis and high intrinsic charge carrier mobility. Availability of such high-performance devices has allowed the study of Hall effect in perovskite FETs for the first time. Our magneto-transport measurements show that the charge carrier mobility of CsPbBr3 FETs increases on cooling, from ~ 30 cm2V-1s-1 at room temperature, to ~ 250 cm2V-1s-1 at 50 K, exhibiting a band transport mostly limited by phonon scattering. The epitaxial growth and FET fabrication methodologies described here can be naturally extended to other perovskites, including the hybrid ones, thus representing a technological leap forward, overcoming the performance bottleneck in research on perovskite FETs.

cond-mat.mtrl-sci↗
arXiv2021

The Dark Machines Anomaly Score Challenge: Benchmark Data and Model Independent Event Classification for the Large Hadron Collider

We describe the outcome of a data challenge conducted as part of the Dark Machines Initiative and the Les Houches 2019 workshop on Physics at TeV colliders. The challenged aims at detecting signals of new physics at the LHC using unsupervised machine learning algorithms. First, we propose how an anomaly score could be implemented to define model-independent signal regions in LHC searches. We define and describe a large benchmark dataset, consisting of >1 Billion simulated LHC events corresponding to $10~\rm{fb}^{-1}$ of proton-proton collisions at a center-of-mass energy of 13 TeV. We then review a wide range of anomaly detection and density estimation algorithms, developed in the context of the data challenge, and we measure their performance in a set of realistic analysis environments. We draw a number of useful conclusions that will aid the development of unsupervised new physics searches during the third run of the LHC, and provide our benchmark dataset for future studies at https://www.phenoMLdata.org. Code to reproduce the analysis is provided at https://github.com/bostdiek/DarkMachines-UnsupervisedChallenge.

hep-ph↗