Searcharxiv⌕ Search

arXiv subjects

Zhangdui Zhong

Publications and source records attributed to Zhangdui Zhong.

At least 37 records · Page 2Linked to original sources
arXiv2024

Orthogonal Delay-Doppler Division Multiplexing Modulation with Tomlinson-Harashima Precoding

The orthogonal delay-Doppler (DD) division multiplexing(ODDM) modulation has been recently proposed as a promising modulation scheme for next-generation communication systems with high mobility. Despite its benefits, ODDM modulation and other DD domain modulation schemes face the challenge of excessive equalization complexity. To address this challenge, we propose time domain Tomlinson-Harashima precoding (THP) for the ODDM transmitter, to make the DD domain single-tap equalizer feasible, thereby reducing the equalization complexity. In our design, we first pre-cancel the inter-symbolinterference (ISI) using the linear time-varying (LTV) channel information. Second, different from classical THP designs, we introduce a modified modulo operation with an adaptive modulus, by which the joint DD domain data multiplexing and timedomain ISI pre-cancellation can be realized without excessively increasing the bit errors. We then analytically study the losses encountered in this design, namely the power loss, the modulo noise loss, and the modulo signal loss. Based on this analysis, BER lower bounds of the ODDM system with time domain THP are derived when 4-QAM or 16-QAM modulations are adopted for symbol mapping in the DD domain. Finally, through numerical results, we validate our analysis and then demonstrate that the ODDM system with time domain THP is a promising solution to realize better BER performance over LTV channels compared to orthogonal frequency division multiplexing systems with single-tap equalizer and ODDM systems with maximum ratio combining.

eess.SP↗
arXiv2024

Channel Spreading Function-Inspired Channel Transfer Function Estimation for OFDM Systems with High-Mobility

In this letter, we propose a novel channel transfer function (CTF) estimation approach for orthogonal frequency division multiplexing (OFDM) systems in high-mobility scenarios, that leverages the stationary properties of the delay-Doppler domain channel spreading function (CSF). First, we develop a CSF estimation model for OFDM systems that relies solely on discrete pilot symbols in the time-frequency (TF) domain, positioned at predefined resource elements. We then present theorems to elucidate the relationship between CSF compactness and pilot spacing in the TF domain for accurate CSF acquisition. Based on the estimated CSF, we finally estimate the CTF for data symbols. Numerical results show that, in high-mobility scenarios, the proposed approach outperforms traditional interpolation-based methods and closely matches the optimal estimator in terms of estimation accuracy. This work may pave the way for CSF estimation in commercial OFDM systems, benefiting high-mobility communications, integrated sensing and communications, and related applications.

eess.SP↗
arXiv2024

GNN-Enabled Optimization of Placement and Transmission Design for UAV Communications

This paper applies graph neural networks (GNN) in UAV communications to optimize the placement and transmission design. We consider a multiple-user multiple-input-single-output UAV communication system where a UAV intends to find a placement to hover and serve users with maximum energy efficiency (EE). To facilitate the GNN-based learning, we adopt the hybrid maximum ratio transmission and zero forcing scheme to design the beamforming vectors and a feature augment is implemented by manually setting edge features. Furthermore, we propose a two-stage GNN-based model where the first stage and the second stage yield the placement and the transmission design, respectively. The two stages are connected via a residual and their learnable weights are jointly optimized by via unsupervised learning. Numerical results illustrate the effectiveness and validate the scalability to both UAV antennas and users of the proposed model.

eess.SP↗
arXiv2024

A Cluster-Based Statistical Channel Model for Integrated Sensing and Communication Channels

The emerging 6G network envisions integrated sensing and communication (ISAC) as a promising solution to meet growing demand for native perception ability. To optimize and evaluate ISAC systems and techniques, it is crucial to have an accurate and realistic wireless channel model. However, some important features of ISAC channels have not been well characterized, for example, most existing ISAC channel models consider communication channels and sensing channels independently, whereas ignoring correlation under the consistent environment. Moreover, sensing channels have not been well modeled in the existing standard-level channel models. Therefore, in order to better model ISAC channel, a cluster-based statistical channel model is proposed in this paper, which is based on measurements conducted at 28 GHz. In the proposed model, a new framework based on 3GPP standard is proposed, which includes communication clusters and sensing clusters. Clustering and tracking algorithms are used to extract and analyze ISAC channel characteristics. Furthermore, some special sensing cluster structures such as shared sensing cluster, newborn sensing cluster, etc., are defined to model correlation and difference between communication and sensing channels. Finally, accuracy of the proposed model is validated based on measurements and simulations.

eess.SP↗
arXiv2023

Sum Rate Maximization under AoI Constraints for RIS-Assisted mmWave Communications

The concept of age of information (AoI) has been proposed to quantify information freshness, which is crucial for time-sensitive applications. However, in millimeter wave (mmWave) communication systems, the link blockage caused by obstacles and the severe path loss greatly impair the freshness of information received by the user equipments (UEs). In this paper, we focus on reconfigurable intelligent surface (RIS)-assisted mmWave communications, where beamforming is performed at transceivers to provide directional beam gain and a RIS is deployed to combat link blockage. We aim to maximize the system sum rate while satisfying the information freshness requirements of UEs by jointly optimizing the beamforming at transceivers, the discrete RIS reflection coefficients, and the UE scheduling strategy. To facilitate a practical solution, we decompose the problem into two subproblems. For the first per-UE data rate maximization problem, we further decompose it into a beamforming optimization subproblem and a RIS reflection coefficient optimization subproblem. Considering the difficulty of channel estimation, we utilize the hierarchical search method for the former and the local search method for the latter, and then adopt the block coordinate descent (BCD) method to alternately solve them. For the second scheduling strategy design problem, a low-complexity heuristic scheduling algorithm is designed. Simulation results show that the proposed algorithm can effectively improve the system sum rate while satisfying the information freshness requirements of all UEs.

cs.IT↗
arXiv2023

Reconfigurable Intelligent Surface Assisted High-Speed Train Communications: Coverage Performance Analysis and Placement Optimization

Reconfigurable intelligent surface (RIS) emerges as an efficient and promising technology for the next wireless generation networks and has attracted a lot of attention owing to the capability of extending wireless coverage by reflecting signals toward targeted receivers. In this paper, we consider a RIS-assisted high-speed train (HST) communication system to enhance wireless coverage and improve coverage probability. First, coverage performance of the downlink single-input-single-output system is investigated, and the closed-form expression of coverage probability is derived. Moreover, travel distance maximization problem is formulated to facilitate RIS discrete phase design and RIS placement optimization, which is subject to coverage probability constraint. Simulation results validate that better coverage performance and higher travel distance can be achieved with deployment of RIS. The impacts of some key system parameters including transmission power, signal-to-noise ratio threshold, number of RIS elements, number of RIS quantization bits, horizontal distance between base station and RIS, and speed of HST on system performance are investigated. In addition, it is found that RIS can well improve coverage probability with limited power consumption for HST communications.

cs.IT↗
arXiv2023

QoS-aware User Association and Transmission Scheduling for Millimeter-Wave Train-ground Communications

With the development of wireless communication, people have put forward higher requirements for train-ground communications in the high-speed railway (HSR) scenarios. With the help of mobile relays (MRs) installed on the roof of the train, the application of Millimeter-Wave (mm-wave) communication which has rich spectrum resources to the train-ground communication system can realize high data rate, so as to meet users' increasing demand for broad-band multimedia access. Also, full-duplex (FD) technology can theoretically double the spectral efficiency. In this paper, we formulate the user association and transmission scheduling problem in the mm-wave train-ground communication system with MR operating in the FD mode as a nonlinear programming problem. In order to maximize the system throughput and the number of users meeting quality of service (QoS) requirements, we propose an algorithm based on coalition game to solve the challenging NP-hard problem, and also prove the convergence and Nash-stable structure of the proposed algorithm. Extensive simulation results demonstrate that the proposed coalition game based algorithm can effectively improve the system throughput and meet the QoS requirements of as many users as possible, so that the communication system has a certain QoS awareness.

cs.IT↗
arXiv2023

Robust Train-to-Train Transmission Scheduling in mmWave Band for High Speed Train Communication Systems

Demands for data traffic in high-speed railway (HSR) has increased drastically. The increasing entertainment needs of passengers, safety control information exchanges of trains, etc., make train-to-train (T2T) communications face the challenge of achieving high-capacity and high-quality data transmissions. In order to greatly increase the communication capacity, it is urgent to introduce millimeter wave (mmWave) technology. Faced with the problem that mmWave link is easy to be blocked, this paper leverages the existing equipment to assist relay, and proposes an effective transmission scheduling scheme to improve the robustness of T2T communication systems. First of all, we formulate a mixed integer nonlinear programming (MINLP) optimization problem the transmission scheduling in T2T communication systems where mobile relays (MRs) are all working in the full-duplex (FD) mode. Then we propose a low complexity heuristic algorithm to solve the optimization problem, which consists of three components: relay selection, transmission mode selection, and transmission scheduling. The simulation results show that the proposed algorithm can greatly improve the number of completed flows and system throughput. Finally, we analyze the influence of different design parameters on the system performance. The results show that the proposed algorithm can achieve more data flows and system throughput within a reasonable communication distance threshold in T2T communication with obstacles in different orbits. It can balance the computational complexity and system performance to achieve an efficient and robust data transmission.

cs.IT↗
arXiv2023

RIS-assisted High-Speed Railway Integrated Sensing and Communication System

One technology that has the potential to improve wireless communications in years to come is integrated sensing and communication (ISAC). In this study, we take advantage of reconfigurable intelligent surface's (RIS) potential advantages to achieve ISAC while using the same frequency and resources. Specifically, by using the reflecting elements, the RIS dynamically modifies the radio waves' strength or phase in order to change the environment for radio transmission and increase the ISAC systems' transmission rate. We investigate a single cell downlink communication situation with RIS assistance. Combining the ISAC base station's (BS) beamforming with RIS's discrete phase shift optimization, while guaranteeing the sensing signal, The aim of optimizing the sum rate is specified. We take advantage of alternating maximization to find practical solutions with dividing the challenge into two minor issues. The first power allocation subproblem is non-convex that CVX solves by converting it to convex. A local search strategy is used to solve the second subproblem of phase shift optimization. According to the results of the simulation, using RIS with adjusted phase shifts can significantly enhance the ISAC system's performance.

eess.SP↗
arXiv2023

Joint User Association and Transmission Scheduling in Integrated mmWave Access and Terahertz Backhaul Networks

Terahertz wireless backhaul is expected to meet the high-speed backhaul requirements of future ultra-dense networks using millimeter-wave (mmWave) base stations (BSs). In order to achieve higher network capacity with limited resources and meet the quality of service (QoS) requirements of more users in the integrated mmWave access and terahertz backhaul network, this paper formulates a problem of maximizing the number of users successfully served in both the access and backhaul links. Since the problem is a non-linear integer optimization problem, a minimum rate ratio user association and transmission scheduling algorithm is proposed to obtain a suboptimal solution. The proposed algorithm takes the minimum rate ratio as the user association criterion and schedules first the users with fewer backhaul transmission slots. In addition, the algorithm will update the number of access transmission slots allocated to users and the access scheduling results after the backhaul scheduling phase. Numerical results show that the proposed algorithm outperforms several benchmark algorithms in terms of the number of served users and system throughput, and it can cope with a large number of bursty user requests.

cs.IT↗
arXiv2023

Joint Design of Access and Backhaul in Densely Deployed MmWave Small Cells

With the rapid growth of mobile data traffic, the shortage of radio spectrum resource has become increasingly prominent. Millimeter wave (mmWave) small cells can be densely deployed in macro cells to improve network capacity and spectrum utilization. Such a network architecture is referred to as mmWave heterogeneous cellular networks (HetNets). Compared with the traditional wired backhaul, The integrated access and backhaul (IAB) architecture with wireless backhaul is more flexible and cost-effective for mmWave HetNets. However, the imbalance of throughput between the access and backhaul links will constrain the total system throughput. Consequently, it is necessary to jointly design of radio access and backhaul link. In this paper, we study the joint optimization of user association and backhaul resource allocation in mmWave HetNets, where different mmWave bands are adopted by the access and backhaul links. Considering the non-convex and combinatorial characteristics of the optimization problem and the dynamic nature of the mmWave link, we propose a multi-agent deep reinforcement learning (MADRL) based scheme to maximize the long-term total link throughput of the network. The simulation results show that the scheme can not only adjust user association and backhaul resource allocation strategy according to the dynamics in the access link state, but also effectively improve the link throughput under different system configurations.

cs.IT↗
arXiv2023

Joint Optimization of Resource Allocation and User Association in Multi-Frequency Cellular Networks Assisted by RIS

Due to the development of communication technology and the rise of user network demand, a reasonable resource allocation for wireless networks is the key to guaranteeing regular operation and improving system performance. Various frequency bands exist in the natural network environment, and heterogeneous cellular network (HCN) has become a hot topic for current research. Meanwhile, Reconfigurable Intelligent Surface (RIS) has become a key technology for developing next-generation wireless networks. By modifying the phase of the incident signal arriving at the RIS surface, RIS can improve the signal quality at the receiver and reduce co-channel interference. In this paper, we develop a RIS-assisted HCN model for a multi-base station (BS) multi-frequency network, which includes 4G, 5G, millimeter wave (mmwave), and terahertz networks, and considers the case of multiple network coverage users, which is more in line with the realistic network characteristics and the concept of 6G networks. We propose the optimization objective of maximizing the system sum rate, which is decomposed into two subproblems, i.e., the user resource allocation and the phase shift optimization problem of RIS components. Due to the NP-hard and coupling relationship, we use the block coordinate descent (BCD) method to alternately optimize the local solutions of the coalition game and the local discrete phase search algorithm to obtain the global solution. In contrast, most previous studies have used the coalition game algorithm to solve the resource allocation problem alone. Simulation results show that the algorithm performs better than the rest of the algorithms, effectively improves the system sum rate, and achieves performance close to the optimal solution of the traversal algorithm with low complexity.

cs.IT↗
arXiv2023

Communication-Sensing Region for Cell-Free Massive MIMO ISAC Systems

This paper investigates the system model and the transmit beamforming design for the Cell-Free massive multi-input multi-output (MIMO) integrated sensing and communication (ISAC) system. The impact of the uncertainty of the target locations on the propagation of wireless signals is considered during both uplink and downlink phases, and especially, the main statistics of the MIMO channel estimation error are theoretically derived in the closed-form fashion. A fundamental performance metric, termed communication-sensing (C-S) region, is defined for the considered system via three cases, i.e., the sensing-only case, the communication-only case and the ISAC case. The transmit beamforming design problems for the three cases are respectively carried out through different reformulations, e.g., the Lagrangian dual transform and the quadratic fractional transform, and some combinations of the block coordinate descent method and the successive convex approximation method. Numerical results present a 3-dimensional C-S region with a dynamic number of access points to illustrate the trade-off between communication and radar sensing. The advantage for radar sensing of the Cell-Free massive MIMO system is also studied via a comparison with the traditional cellular system. Finally, the efficacy of the proposed beamforming scheme is validated in comparison with zero-forcing and maximum ratio transmission schemes.

cs.IT↗
arXiv2023

A 3D Modeling Method for Scattering on Rough Surfaces at the Terahertz Band

The terahertz (THz) band (0.1-10 THz) is widely considered to be a candidate band for the sixth-generation mobile communication technology (6G). However, due to its short wavelength (less than 1 mm), scattering becomes a particularly significant propagation mechanism. In previous studies, we proposed a scattering model to characterize the scattering in THz bands, which can only reconstruct the scattering in the incidence plane. In this paper, a three-dimensional (3D) stochastic model is proposed to characterize the THz scattering on rough surfaces. Then, we reconstruct the scattering on rough surfaces with different shapes and under different incidence angles utilizing the proposed model. Good agreements can be achieved between the proposed model and full-wave simulation results. This stochastic 3D scattering model can be integrated into the standard channel modeling framework to realize more realistic THz channel data for the evaluation of 6G.

eess.SP↗
arXiv2023

Resource Allocation for RIS-Assisted Device-to-Device Communications in Heterogeneous Cellular Networks

In recent years, with the explosive growth of data traffic, communication base stations (BSs) need to serve more and more users. Offloading traffic from BSs has become an efficient way to reduce the burden on BSs. Device-to-Device (D2D) communications have emerged to improve spectrum utilization by reusing the frequency spectrum of the cellular frequency band. In the general environment, Heterogeneous Cellular Networks (HCNs) including millimeter wave (mm-wave) have appeared. Since the D2D link allows to share of spectrum resources with the cellular user, it will bring potential interference to the cellular user. Fortunately, an emerging technology called Reconfigurable Intelligent Surface (RIS) can mitigate the severe interference caused by D2D links by shaping the incident beam and improving the multipath phase shift. In this paper, we study the resource allocation scheme to maximize the system sum rate, in the RISassisted single-cell heterogeneous D2D communication scenario. To solve the Block Coordinate Descent (BCD) problem, the problem of maximizing the sum rate is decomposed into three sub-problems. The resource allocation sub-problem is solved by a coalitional game method based on the game theory. The power allocation problem of the coalition converts the concave function into a convex optimization by mathematical transformation. The problem is solved by the gradient descent method. The local search method is adopted to find the optimum for the phase conversion problem. Then iterate until the difference of sum rate is less than the threshold. The simulation results show that the designed algorithm is superior to other benchmark schemes in the literature.

cs.IT↗
arXiv2023

A Ray-tracing and Deep Learning Fusion Super-resolution Modeling Method for Wireless Mobile Channel

Mobile channel modeling has always been the core part for design, deployment and optimization of communication system, especially in 5G and beyond era. Deterministic channel modeling could precisely achieve mobile channel description, however with defects of equipment and time consuming. In this paper, we proposed a novel super resolution (SR) model for cluster characteristics prediction. The model is based on deep neural networks with residual connection. A series of simulations at 3.5 GHz are conducted by a three-dimensional ray tracing (RT) simulator in diverse scenarios. Cluster characteristics are extracted and corresponding data sets are constructed to train the model. Experiments demonstrate that the proposed SR approach could achieve better power and cluster location prediction performance than traditional interpolation method and the root mean square error (RMSE) drops by 51% and 78% relatively. Channel impulse response (CIR) is reconstructed based on cluster characteristics, which could match well with the multi-path component (MPC). The proposed method can be used to efficiently and accurately generate big data of mobile channel, which significantly reduces the computation time of RT-only.

eess.SP↗
arXiv2022

RIS-assisted Scheduling for High-Speed Railway Secure Communications

With the rapid development of high-speed railway systems and railway wireless communication, the application of ultra-wideband millimeter wave band is an inevitable trend. However, the millimeter wave channel has large propagation loss and is easy to be blocked. Moreover, there are many problems such as eavesdropping between the base station (BS) and the train. As an emerging technology, reconfigurable intelligent surface (RIS) can achieve the effect of passive beamforming by controlling the propagation of the incident electromagnetic wave in the desired direction.We propose a RIS-assisted scheduling scheme for scheduling interrupted transmission and improving quality of service (QoS).In the propsed scheme, an RIS is deployed between the BS and multiple mobile relays (MRs). By jointly optimizing the beamforming vector and the discrete phase shift of the RIS, the constructive interference between direct link signals and indirect link signals can be achieved, and the channel capacity of eavesdroppers is guaranteed to be within a controllable range. Finally, the purpose of maximizing the number of successfully scheduled tasks and satisfying their QoS requirements can be practically realized. Extensive simulations demonstrate that the proposed scheme has superior performance regarding the number of completed tasks and the system secrecy capacity over four baseline schemes in literature.

cs.IT↗
arXiv2022

Energy Efficient Train-Ground mmWave Mobile Relay System for High Speed Railways

The rapid development of high-speed railways (HSRs) puts forward high requirements on the corresponding communication system. Millimeter wave (mmWave) can be a promising solution due to its wide bandwidth, narrow beams, and rich spectrum resources. However, with the large number of antenna elements employed, energy-efficient solutions at mmWave frequencies are in great demand. Based on a mmWave HSR communication system with multiple mobile relays (MRs) on top of the train, a dynamic power-control scheme for train-ground communications is proposed. The scheme follows the regular movement characteristics of high-speed trains and considers three phases of train movement: the train enters the cell, all MRs are covered in the cell, and the train leaves the cell. The transmit power is further refined according to the number of MRs in the cell and the distance between the train and the remote radio head. By minimizing energy consumption under the constraints of the transmitted data and transmit power budget, the transmit power is allocated to multiple MRs through the multiplier punitive function-based algorithm. Comprehensive simulation results, where the velocity estimation error is taken into account, are provided to demonstrate the effectiveness of the proposed scheme over several baseline schemes.

cs.IT↗