arXiv subjects

Zhangdui Zhong

Publications and source records attributed to Zhangdui Zhong.

At least 55 records · Page 3Linked to original sources

arXiv2022

Robust Transmission Scheduling for UAV-assisted Millimeter-Wave Train-Ground Communication System

With the explosive growth of mobile data, the demand of high-speed railway (HSR) passengers for broadband wireless access services urgently needs the support of ultra-highspeed scenario broadband wireless communication. Millimeterwave (mmWave) can achieve high data transmission rates, but it is accompanied by high propagation loss and vulnerability to blockage. To address this issue, developments of directional antennas and unmanned aerial vehicles (UAVs) enhance the robustness of the mmWave train-ground communication system. In this paper, we propose a UAV and MRs relay assistance (UMRA) algorithm to effectively overcome link blockage, which can maximize the number of transmission flows on the premise of meeting QoS requirements and channel qualities. First, we formulate a mixed integer nonlinear programming (MINLP) problem for UAV trajectory design and transmission scheduling in the full-duplex (FD) mode. Then, in UMRA, the relay decision algorithm and transmission scheduling algorithm based on graph theory are proposed, which make a good tradeoff between computation complexity and system performance. Extensive simulation results show that a suitable UAV position will greatly improve the performance of the UMRA algorithm and make it close to the optimal solution. Compared with the other two existing benchmark schemes, with the high channel quality requirements and large-area blockage, UMRA can greatly improve the number of completed flows and system throughput.

cs.IT↗

arXiv2022

5G for Railways: the Next Generation Railway Dedicated Communications

To overcome increasing traffic, provide various new services, further ensure safety and security, significantly improve travel comfort, a new communication system for railways is required. Since 2019, public networks have been evolving to the fifth generation communication (5G) worldwide, whereas the main communication system of railway is still based on the second generation communication (2G). It is thus necessary for railways to replace the current 2G-based technology with the next generation railway dedicated communication system with improved capacity and capability, and the 5G for railways (5G-R) technology is a promising solution for further intelligent railways. This article gives a review of the current developments of the next generation railway communications, followed by a discussion of the typical services that the 5G-R can provide to intelligent railways. Then, main application scenarios of 5G-R are summarized and system configurations are compared. Some key technologies of 5G-R such as network architecture, massive MIMO, millimeter-wave, multiple access scheme, ultra-reliable low latency communication, and advanced video processing are presented and analyzed. Finally, some challenges of 5G-R are highlighted.

eess.SY↗

arXiv2022

Resource Allocation and Computation Offloading in a Millimeter-Wave Train-Ground Network

In this paper, we consider an mmWave-based trainground communication system in the high-speed railway (HSR) scenario, where the computation tasks of users can be partially offloaded to the rail-side base station (BS) or the mobile relays (MRs) deployed on the roof of the train. The MRs operate in the full-duplex (FD) mode to achieve high spectrum utilization. We formulate the problem of minimizing the average task execution latency of all users, under local device and MRs energy consumption constraints. We propose a joint resource allocation and computation offloading scheme (JRACO) to solve the problem. It consists of a resource allocation and computation offloading (RACO) algorithm and an MR Energy constraint algorithm. RACO utilizes the matching game theory to iterate between two subproblems, i.e., data segmentation and user association and sub-channel allocation. With the RACO results, the MR energy constraint algorithm ensures that the MR energy consumption constraint is satisfied. Extensive simulations validate that JRACO can effectively reduce the average latency and increase the number of served users compared with three baseline schemes.

cs.IT↗

arXiv2022

Triple-Band Scheduling with Millimeter Wave and Terahertz Bands for Wireless Backhaul

With the explosive growth of mobile traffic demand, densely deployed small cells underlying macrocells have great potential for 5G and beyond wireless networks. In this paper, we consider the problem of supporting traffic flows with diverse QoS requirements by exploiting three high frequency bands, i.e., the 28GHz band, the E-band, and the Terahertz (THz) band. The cooperation of the three bands is helpful for maximizing the number of flows with their QoS requirements satisfied. To solve the formulated nonlinear integer programming problem, we propose a triple-band scheduling scheme which can select the optimum scheduling band for each flow among three different frequency bands. The proposed scheme also efficiently utilizes the resource to schedule flow transmissions in time slots. Extensive simulations demonstrate the superior performance of the proposed scheme over three baseline schemes with respect to the number of completed flows and the system throughput.

cs.IT↗

arXiv2022

Coverage Probability Analysis of RIS-Assisted High-Speed Train Communications

Reconfigurable intelligent surface (RIS) has received increasing attention due to its capability of extending cell coverage by reflecting signals toward receivers. This paper considers a RIS-assisted high-speed train (HST) communication system to improve the coverage probability. We derive the closed-form expression of coverage probability. Moreover, we analyze impacts of some key system parameters, including transmission power, signal-to-noise ratio threshold, and horizontal distance between base station and RIS. Simulation results verify the efficiency of RIS-assisted HST communications in terms of coverage probability.

cs.IT↗

arXiv2022

Scheduling of UAV-assisted Millimeter Wave Communications for High-Speed Railway

To exploit richer spectrum resources for even better service quality, millimeter wave (mmWave) communication has been considered for high-speed railway (HSR) communication systems. In this paper, we focus on scheduling as many flows as possible while satisfying their QoS requirements. Due to interference, eavesdropping, or other problems, some flows may not be directly transmitted from the track-side BS. In this paper, we propose an UAV-assisted scheduling scheme which utilizes a UAV to serve as relay for such flows. The proposed scheme also utilize two mmWave bands, one for the BS links and the other for the UAV links. The proposed algorithm aims to maximize the number of flows with their QoS requirements satisfied. Simulations demonstrate that the proposed scheme achieves a superior performance on the number of completed flows and the system throughput over two baseline schemes.

cs.IT↗

arXiv2022

Mobility Support for Millimeter Wave Communications: Opportunities and Challenges

Millimeter-wave (mmWave) communication technology offers a potential and promising solution to support 5G and B5G wireless networks in dynamic scenarios and applications. However, mobility introduces many challenges as well as opportunities to mmWave applications. To address these problems, we conduct a survey of the opportunities and technologies to support mmWave communications in mobile scenarios. Firstly, we summarize the mobile scenarios where mmWave communications are exploited, including indoor wireless local area network (WLAN) or wireless personal area network (WPAN), cellular access, vehicle-to-everything (V2X), high speed train (HST), unmanned aerial vehicle (UAV), and the new space-air-ground-sea communication scenarios. Then, to address users' mobility impact on the system performance in different application scenarios, we introduce several representative mobility models in mmWave systems, including human mobility, vehicular mobility, high speed train mobility and ship mobility. Next we survey the key challenges and existing solutions to mmWave applications, such as channel modeling, channel estimation, anti-blockage, and capacity improvement. Lastly, we discuss the open issues concerning mobility-aware mmWave communications that deserve further investigation. In particular, we highlight future heterogeneous mobile networks, dynamic resource management, artificial intelligence (AI) for mobility and integration of geographical information, deployment of large intelligent surface and reconfigurable antenna technology, and finally, the evolution to Terahertz (THz) communications.

cs.IT↗

arXiv2021

A Scheme of Channel Prediction Based on Artificial Neural Network

Accurate channel modeling is the foundation of communication system design. However, the traditional measurement-based modeling approach has increasing challenges for the scenarios with insufficient measurement data. To obtain enough data for channel modeling, the Artificial Neural Network (ANN) is used in this paper to predict channel data. The high mobility railway channel is considered, which is a typical scenario where it is challenging to obtain enough data for modeling within a short sampling interval. Three types of ANNs, the Back Propagation Network, Radial Basis Function Neural Network and Extreme Learning Machine, are considered to predict channel path loss and shadow fading. The Root-Mean-Square error is used to evaluate prediction accuracy. The factors that may influence prediction accuracy are compared and discussed, including the type of network, number of neurons and proportion of training data. It is found that a larger number of neurons can significantly reduce prediction error, whereas the influence of proportion of training data is relatively small. The results can be used to improve modeling accuracy of path loss and shadow fading when measurement data is reduced.

cs.IT↗

arXiv2021

Artificial intelligence enabled radio propagation for communications-Part I: Channel characterization and antenna-channel optimization

To provide higher data rates, as well as better coverage, cost efficiency, security, adaptability, and scalability, the 5G and beyond 5G networks are developed with various artificial intelligence techniques. In this two-part paper, we investigate the application of artificial intelligence (AI) and in particular machine learning (ML) to the study of wireless propagation channels. It firstly provides a comprehensive overview of ML for channel characterization and ML-based antenna-channel optimization in this first part, and then it gives a state-of-the-art literature review of channel scenario identification and channel modeling in Part II. Fundamental results and key concepts of ML for communication networks are presented, and widely used ML methods for channel data processing, propagation channel estimation, and characterization are analyzed and compared. A discussion of challenges and future research directions for ML-enabled next generation networks of the topics covered in this part rounds off the paper.

eess.SP↗

arXiv2021

Artificial intelligence enabled radio propagation for communications-Part II: Scenario identification and channel modeling

This two-part paper investigates the application of artificial intelligence (AI) and in particular machine learning (ML) to the study of wireless propagation channels. In Part I, we introduced AI and ML as well as provided a comprehensive survey on ML enabled channel characterization and antenna-channel optimization, and in this part (Part II) we review state-of-the-art literature on scenario identification and channel modeling here. In particular, the key ideas of ML for scenario identification and channel modeling/prediction are presented, and the widely used ML methods for propagation scenario identification and channel modeling and prediction are analyzed and compared. Based on the state-of-art, the future challenges of AI/ML-based channel data processing techniques are given as well.

eess.SP↗

arXiv2021

Robust Symbol-Level Precoding and Passive Beamforming for IRS-Aided Communications

This paper investigates a joint beamforming design in a multiuser multiple-input single-output (MISO) communication network aided with an intelligent reflecting surface (IRS) panel. The symbol-level precoding (SLP) is adopted to enhance the system performance by exploiting the multiuser interference (MUI) with consideration of bounded channel uncertainty. The joint beamforming design is formulated into a nonconvex worst-case robust programming to minimize the transmit power subject to single-to-noise ratio (SNR) requirements. To address the challenges due to the constant modulus and the coupling of the beamformers, we first study the single-user case. Specifically, we propose and compare two algorithms based on the semidefinite relaxation (SDR) and alternating optimization (AO) methods, respectively. It turns out that the AO-based algorithm has much lower computational complexity but with almost the same power to the SDR-based algorithm. Then, we apply the AO technique to the multiuser case and thereby develop an algorithm based on the proximal gradient descent (PGD) method. The algorithm can be generalized to the case of finite-resolution IRS and the scenario with direct links from the transmitter to the users. Numerical results show that the SLP can significantly improve the system performance. Meanwhile, 3-bit phase shifters can achieve near-optimal power performance.

cs.IT↗

arXiv2021

Cluster-based Characterization and Modeling for UAV Air-to-Ground Time-Varying Channels

With the deep integration between the unmanned aerial vehicle (UAV) and wireless communication, UAV-based air-to-ground (AG) propagation channels need more detailed descriptions and accurate models. In this paper, we aim to perform cluster-based characterization and modeling for AG channels. To our best knowledge, this is the first study that concentrates on the clustering and tracking of multipath components (MPCs) for time-varying AG channels. Based on measurement data at 6.5 GHz with 500 MHz of bandwidth, we first estimate potential MPCs utilizing the space-alternating generalized expectation-maximization (SAGE) algorithm. Then, we cluster the extracted MPCs considering their static and dynamic characteristics by employing K-Power-Means (KPM) algorithm under multipath component distance (MCD) measure. For characterizing time-variant clusters, we exploit a clustering-based tracking (CBT) method, which efficiently quantifies the survival lengths of clusters. Ultimately, we establish a cluster-based channel model, and validations illustrate the accuracy of the proposed model. This work not only promotes a better understanding of AG propagation channels but also provides a general cluster-based AG channel model with certain extensibility.

eess.SP↗

arXiv2021

Coverage Analysis of Cellular-Connected UAV Communications with 3GPP Antenna and Channel Models

For reliable and efficient communications of aerial platforms, such as unmanned aerial vehicles (UAVs), the cellular network is envisioned to provide connectivity for the aerial and ground user equipment (GUE) simultaneously, which brings challenges to the existing pattern of the base station (BS) tailored for ground-level services. Thus, we focus on the coverage probability analysis to investigate the coexistence of aerial and terrestrial users, by employing realistic antenna and channel models reported in the 3rd Generation Partnership Project (3GPP). The homogeneous Poisson point process (PPP) is used to describe the BS distribution, and the BS antenna is adjustable in the down-tilted angle and the number of the antenna array. Meantime, omnidirectional antennas are used for cellular users. We first derive the approximation of coverage probability and then conduct numerous simulations to evaluate the impacts of antenna numbers, down-tilted angles, carrier frequencies, and user heights. One of the essential findings indicates that the coverage probabilities of high-altitude users become less sensitive to the down-tilted angle. Moreover, we found that the aerial user equipment (AUE) in a certain range of heights can achieve the same or better coverage probability than that of GUE, which provides an insight into the effective deployment of cellular-connected aerial communications.

cs.IT↗

arXiv2021

Resource Allocation for Millimeter-Wave Train-Ground Communications in High-Speed Railway Scenarios

With the development of wireless communication, higher requirements arise for train-ground wireless communications in high-speed railway (HSR) scenarios. The millimeter-wave (mm-wave) frequency band with rich spectrum resources can provide users in HSR scenarios with high performance broadband multimedia services, while the full-duplex (FD) technology has become mature. In this paper, we study train-ground communication system performance in HSR scenarios with mobile relays (MRs) mounted on rooftop of train and operating in the FD mode. We formulate a nonlinear programming problem to maximize network capacity by allocation of spectrum resources. Then, we develop a sequential quadratic programming (SQP) algorithm based on the Lagrange function to solve the bandwidth allocation optimization problem for track-side base station (BS) and MRs in this mm-wave train-ground communication system. Extensive simulation results demonstrate that the proposed SQP algorithm can effectively achieve high network capacity for trainground communication in HSR scenarios while being robust to the residual self-interference (SI).

cs.IT↗

arXiv2021

Channel Modeling for UAV Communications: State of the Art, Case Studies, and Future Directions

As essential aerial platforms, unmanned aerial vehicles (UAVs) play an increasingly important role in broad wireless connectivity and high-data-rate transmission for future communication systems. Notably, various communication scenarios are involved in UAV communications, such as intercommunications between UAVs and communications with the ground user equipment, the cellular base station, and the ground station, to name a few. However, existing works mostly focus on a single communication scenario, a designated channel type, and a specific operating frequency, thus urgently requiring a comprehensive understanding of multi-scenario, multi-frequency, and multi-type UAV channels. This article pours attention into the essentials of corresponding air-to-air (A2A) and air-to-ground (A2G) channels in UAV communications. We first identify the latest key challenges of channel modeling for UAV communications. We then provide the state of the art for A2A and A2G channel properties and models based on extensive measurement campaigns. In particular, we conduct realistic case studies to further demonstrate critical channel characterizations and machine learning-based modeling methods. Last but not least, potential directions are widely discussed for paving the way towards more accurate and effective channel models for UAV communications.

eess.SP↗

arXiv2021

Radio Communication Scenarios in 5G-Railways

With the rapid development of railways, especially high-speed railways, there is an increasingly urgent demand for new wireless communication system for railways. Taking the mature 5G technology as an opportunity, 5G-railways (5G-R) have been widely regarded as a solution to meet the diversified demands of railway wireless communications. For the design, deployment and improvement of 5G-R networks, radio communication scenario classification plays an important role, affecting channel modeling and system performance evaluation. In this paper, a standardized radio communication scenario classification, including 18 scenarios, is proposed for 5G-R. This paper analyzes the differences of 5G-R scenarios compared with the traditional cellular networks and GSM-railways, according to 5G-R requirements and the unique physical environment and propagation characteristics. The proposed standardized scenario classification helps deepen the research of 5G-R and promote the development and application of the existing advanced technologies in railways.

cs.NI↗

arXiv2021

Coalition Game Based Full-duplex Popular Content Distribution in mmWave Vehicular Networks

The millimeter wave (mmWave) communication has drawn intensive attention with abundant band resources. In this paper, we consider the popular content distribution (PCD) problem in the mmWave vehicular network. In order to offload the communication burden of base stations (BSs), vehicle-to-vehicle (V2V) communication is introduced into the PCD problem to transmit contents between on-board units (OBUs) and improve the transmission efficiency. We propose a full-duplex (FD) cooperative scheme based on coalition formation game, and the utility function is provided based on the maximization of the number of received contents. The contribution of each member in the coalition can be transferable to its individual profit. While maximizing the number of received contents in the fixed time, the cooperative scheme also ensures the individual profit of each OBU in the coalition. We evaluate the proposed scheme by extensive simulations in mmWave vehicular networks. Compared with other existing schemes, the proposed scheme has superior performances on the number of possessed contents and system fairness. Besides, the low complexity of the proposed algorithm is demonstrated by the switch operation number and CPU time.

cs.IT↗

arXiv2020

Coverage Probability Analysis of IRS-Aided Communication Systems

The intelligent reflective surface (IRS) technology has received many interests in recent years, thanks to its potential uses in future wireless communications, in which one of the promising use cases is to widen coverage, especially in the line-of-sight-blocked scenarios. Therefore, it is critical to analyze the corresponding coverage probability of IRS-aided communication systems. To our best knowledge, however, previous works focusing on this issue are very limited. In this paper, we analyze the coverage probability under the Rayleigh fading channel, taking the number and size of the array elements into consideration. We first derive the exact closed-form of coverage probability for the unit element. Afterward, with the method of moment matching, the approximation of the coverage probability can be formulated as the ratio of upper incomplete Gamma function and Gamma function, allowing an arbitrary number of elements. Finally, we comprehensively evaluate the impacts of essential factors on the coverage probability, such as the coefficient of fading channel, the number and size of the element, and the angle of incidence. Overall, the paper provides a succinct and general expression of coverage probability, which can be helpful in the performance evaluation and practical implementation of the IRS.

eess.SP↗