Searcharxiv⌕ Search

arXiv subjects

Zhaohui Li

Publications and source records attributed to Zhaohui Li.

48 records · Page 3Linked to original sources
arXiv2021

Sorting OAM modes with metasurfaces based on raytracing improved optical coordinate transformation

Optical coordinate transformation (OCT) has attracted widespread attention in the field of orbital angular momentum (OAM) (de)multiplexing or manipulation, but the performance of OCT would suffer from its distortion. In this paper, we quantitatively analyze the distortion of OCT from the perspective of ray optics, and explain its rationality to work under non-normal incident light. For the special case of log-polar coordinate transformation (LPCT), we use a raytracing assisted optimization scheme to improve its distortion, which is related to a Zernike polynomial based phase compensation. After raytracing optimization, the root mean square error (RMSE) of the focused rays is reduced to 1/5 of the original value and the physical optic simulation also shows great improvement. In the experiment, we use three phase masks which are realized by metasurfaces, the measured results show well consistency with the simulation. Results in this paper have great potential to improve the performance of OCT related applications.

physics.optics↗
arXiv2021

The third- and fourth-order orbital angular momentum multiplexed amplification with ultra-low differential mode gain

In this Letter, a ring-core erbium-doped fiber (RC-EDF), with two-layer erbium-doped structure, supporting up to the fourth-order orbital angular momentum (OAM) mode is designed and fabricated for OAM mode multiplexed amplification. Using the RC-EDF, the third- and fourth-order OAM modes amplification with ultra-low differential mode gain (DMG) is demonstrated by observing both the modal intensity and phase distribution and measuring the modal gain under the fundamental mode core-pumping. The measured average gain of four modes (l=+3, -3, +4, -4) multiplexed amplification is higher than 19dB cover the C-band and the DMG is less than 1dB. Additionally, the gain of two conjugate OAM modes are almost the same under different pump power no matter they are amplified simultaneously or separately.

physics.optics↗
arXiv2021

Engineered Raman Lasing in Photonic Integrated Chalcogenide Microresonators

Chalcogenide glass (ChG) is an attractive material for integrated nonlinear photonics due to its wide transparency and high nonlinearity, and its capability of being directly deposited and patterned on Silicon wafer substrates. It has a singular Raman effect among amorphous materials. Yet, the Raman lasing performance in high quality and chip integrated ChG microresonators remains unexplored. Here, we demonstrate an engineered Raman lasing dynamic based on home developed photonic integrated high-Q ChG microresonators. With a quality factor above 10^6, we achieve the record-low lasing threshold 3.25 mW among integrated planar photonic platforms. Both the single-mode Raman lasers and a broadband Raman-Kerr comb are observed and characterized, which is dependent on the dispersion of our flexible photonic platform and engineered via tuning the waveguide geometric size. The tunability of such a chipscale Raman laser is also demonstrated through tuning the pump wavelength and tuning the operating temperature on the chip. This allows for the access of single-mode lasing at arbitrary wavelengths in the range 1615-1755 nm. Our results may contribute to the understanding of rich Raman and Kerr nonlinear interactions in dissipative and nonlinear microresonators, and on application aspect, may pave a way to chip-scale efficient Raman lasers that is highly desired in spectroscopic applications in the infrared.

physics.optics↗
arXiv2021

In Operando magnetometry study on the charge storage mechanism of SnCo alloy lithium ion batteries

In view of the long-standing controversy over the reversibility of transition metals in Sn-based alloys as anode for Li-ion batteries, an in situ real-time magnetic monitoring method was used to investigate the evolution of Sn-Co intermetallic during the electrochemical cycling. Sn-Co alloy film anodes with different compositions were prepared via magnetron sputtering without using binders and conductive additives. The magnetic responses showed that the Co particles liberated by Li insertion recombine fully with Sn during the delithiation to reform Sn-Co intermetallic into stannum richer phases Sn7Co3. However, as the Co content increases, it can only recombine partially with Sn into cobalt richer phases Sn3Co7. The unconverted Co particles may form a dense barrier layer and prevent the full reaction of Li with all the Sn in the anode, leading to lower capacities. These critical results shed light on understanding the reaction mechanism of transition metals, and provide valuable insights toward the design of high-performance Sn alloy based anodes.

cond-mat.mtrl-sci↗
arXiv2021

Burst-Error Propagation Suppression for Decision-Feedback Equalizer in Field-Trial Submarine Fiber-Optic Communications

In this paper, we present a field-trial C-band 72Gbit/s optical on-off keying (OOK) system over 18.8km dispersion-uncompensated submarine optical cable in the South China Sea. Chromatic dispersion (CD) of 18.8km submarine optical cable causes four spectral nulls on the 36GHz bandwidth of 72Gbit/s OOK signal, which is the main obstacle for achieving an acceptable bit-error-rate (BER) performance. Decision feedback equalizer (DFE) is effective to compensate for the spectral nulls. However, DFE has a serious defect of burst-error propagation when the burst errors emerge due to the unstable submarine environment. Weighted DFE (WDFE) can be used to mitigate the burst-error propagation, but it cannot fully compensate for the spectral nulls because only a part of feedback symbols is directly decided. Fortunately, maximum likelihood sequence estimation (MLSE) can be added after the WDFE to simultaneously eliminate the resisting spectral distortions and implement optimal detection. Compared to the joint DFE and MLSE algorithm, the joint WDFE and MLSE algorithm can effectively suppress the burst-error propagation to obtain a maximum 2.9dB improvement of $\boldsymbol{Q}$ factor and eliminate the phenomenon of BER floor. In conclusion, the joint WDFE and MLSE algorithm can solve the burst-error propagation for the field-trial fiber-optic communications.

cs.IT↗
arXiv2020

High-performance Coherent Optical Modulators based on Thin-film Lithium Niobate Platform

The coherent transmission technology using digital signal processing and advanced modulation formats, is bringing networks closer to the theoretical capacity limit of optical fibres, the Shannon limit. The in-phase quadrature electro-optic modulator that encodes information on both the amplitude and the phase of light, is one of the underpinning devices for the coherent transmission technology. Ideally, such modulator should feature low loss, low drive voltage, large bandwidth, low chirp and compact footprint. However, these requirements have been only met on separate occasions. Here, we demonstrate integrated thin-film lithium niobate in-phase/quadrature modulators that fulfil these requirements simultaneously. The presented devices exhibit greatly improved overall performance (half-wave voltage, bandwidth and optical loss) over traditional lithium niobate counterparts, and support modulation data rate up to 320 Gbit s-1. Our devices pave new routes for future high-speed, energy-efficient, and cost-effective communication networks.

physics.app-ph↗
arXiv2020

Adaptive Channel-Matched Detection for C-Band 64-Gbit/s Optical OOK System over 100-km Dispersion-Uncompensated Link

In this paper, we propose adaptive channel-matched detection (ACMD) for C-band 64-Gbit/s intensity-modulation and direct-detection (IM/DD) optical on-off keying (OOK) system over a 100-km dispersion-uncompensated link. The proposed ACMD can adaptively compensate most of the link distortions based on channel and noise characteristics, which includes a polynomial nonlinear equalizer (PNLE), a decision feedback equalizer (DFE) and maximum likelihood sequence estimation (MLSE). Based on the channel characteristics, PNLE eliminates the linear and nonlinear distortions, while the followed DFE compensates the spectral nulls caused by chromatic dispersion. Finally, based on the noise characteristics, a post filter can whiten the noise for implementing optimal signal detection using MLSE. To the best of our knowledge, we present a record C-band 64-Gbit/s IM/DD optical OOK system over a 100 km dispersion-uncompensated link achieving 7\% hard-decision forward error correction limit using only the proposed ACMD at the receiver side. In conclusion, ACMD-based C-band 64-Gbit/s optical OOK system shows great potential for future optical interconnects.

eess.SP↗
arXiv2019

BGD-based Adam algorithm for time-domain equalizer in PAM-based optical interconnects

To the best of our knowledge, for the first time, we propose adaptive moment estimation (Adam) algorithm based on batch gradient descent (BGD) to design a time-domain equalizer (TDE) for PAM-based optical interconnects. Adam algorithm has been widely applied in the fields of artificial intelligence. For TDE, BGD-based Adam algorithm can obtain globally optimal tap coefficients without being trapped in locally optimal tap coefficients. Therefore, fast and stable convergence can be achieved by BGD-based Adam algorithm with low mean square error. Meanwhile, BGD-based Adam algorithm is implemented by parallel processing, which is more efficient than conventional serial algorithms, such as least mean square and recursive least square algorithms. The experimental results demonstrate that BGD-based Adam feed-forward equalizer works well in 120-Gbit/s PAM8 optical interconnects. In conclusion, BGD-based Adam algorithm shows great potential for converging the tap coefficients of TDE in future optical interconnects.

cs.IT↗
arXiv2019

A Polarization-insensitive and High-speed Electro-optic Switch Based on a Hybrid Silicon and Lithium Niobate Platform

We propose and demonstrate a polarization-insensitive and high speed optical switch unit based on a silicon and lithium niobate hybrid integration platform. The presented device exhibits a sub nano-second switching time, low drive voltages of 4.97 V, and low power dissipation due to electrostatic operation. The measured polarization dependence loss was lower than 0.8 dB. The demonstrated optical switch could provide as a building block for polarization-insensitive and high-speed optical matrix switches.

physics.app-ph↗
arXiv2019

First insight into the regime transition dynamics of mode-locked fibre lasers

Mode-locked lasers exhibit complex nonlinear dynamics. Precise observation of these dynamics will aid in understanding of the underlying physics and provide new insights for laser design and applications. The starting dynamics, from initial noise fluctuations to the mode-locking regime, have previously been observed directly by time-stretched transform-based real-time spectroscopy. However, the regime transition dynamics, which are essential processes in mode-locked lasers, have not yet been resolved because regime transition process tracking is very challenging. Here we demonstrate the first insight into the regime transition dynamics enabled by our design of a real-time programmable mode-locked fibre laser, in which different operating regimes can be achieved and switched automatically. The regime transition dynamics among initial noise fluctuations, Q-switching, fundamental mode-locking and harmonic mode-locking regimes have been observed and thoroughly analysed by both temporal and spectral means. These findings will enrich our understanding of the complex dynamics inside mode-locked lasers.

physics.optics↗
arXiv2017

Ultra-broadband On-chip Twisted Light Emitter

On-chip twisted light emitters are essential components for orbital angular momentum (OAM) communication devices, which could address the growing demand for high-capacity communication systems by providing an additional degree of freedom for wavelength/frequency division multiplexing (WDM/FDM). Although whispering gallery mode enabled OAM emitters have been shown to possess some advantages, such as being compact and phase accurate, their inherent narrow bandwidth prevents them from being compatible with WDM/FDM techniques. Here, we demonstrate an ultra-broadband multiplexed OAM emitter that utilizes a novel joint path-resonance phase control concept. The emitter has a micron sized radius and nanometer sized features. Coaxial OAM beams are emitted across the entire telecommunication band from 1450 to 1650 nm. We applied the emitter for OAM communication with a data rate of 1.2 Tbit/s assisted by 30-channel optical frequency combs (OFC). The emitter provides a new solution to further increase of the capacity in the OFC communication scenario.

physics.optics↗