arXiv subjects

Zhen Chen

Publications and source records attributed to Zhen Chen.

250 records · Page 14Linked to original sources

arXiv2016

Melt Flow and Heat Transfer in Laser Drilling

During the laser drilling process the recoil pressure drives melt flow and affects the heat transfer and material removal rate. To get a more realistic picture of the melt flow, a series of differential equations are formulated here that govern the process from pre-heating to melting and evaporation. In particular, the Navier-Stokes equation governing the melt flow is solved with the use of the boundary layer theory and integral methods. Heat conduction in solid is investigated by using the classical method with the corrections that reflect the change in boundary condition from the constant heat flux to Stefan condition. The dependence of saturation temperature on the vapor pressure is taken into account by using the Clausius-Clapeyron equation. Both constantly rising radial velocity profiles and rising-fall velocity profiles are considered. The proposed approach is compared with existing ones. In spite of the assumed varying velocity profiles, the proposed model predicts that the drilling hole profiles are very close to each other in a specific super alloy for given laser beam intensity and pulse duration. The numerical results show that the effect of melt flow on material removal can be ignored in some cases. The findings obtained from the current work provide a better understanding of the effects of melt flow and vaporization on the laser drilling profile evolution, and could improve the solid material removal efficiency.

physics.comp-ph↗

arXiv2015

Superconducting dome and microstructure properties of Rb0.8Fe1.6+xSe2 superconductors

High quality Rb0.8Fe1.6+xSe2 single crystals are grown by a one step melting growth method. Superconductivity has been observed in all samples with x more than 0.05 and the maximum critical temperature Tc~32 K has been obtained in samples with x from 0.1 to 0.2 from electronic resistivity measurement. A superconducting dome in the electronic phase diagram of Tc as a function of Fe content has been observed for the first time in this AxFeySe2 (A=K,Rb) superconducting system. Two coexisting phases with structural modulation vectors of q1=1/5 [3a*+b*] and q2=1/2[a*+b*] have been observed in all superconducting samples by TEM observations. Moreover, phase separation in the superconducting crystals, which can be recognized as micro-stripes in the ab plane, are found to be highly dependent on the Fe content.

cond-mat.supr-con↗

arXiv2014

Locating Contagion Sources in Networks with Partial Timestamps

This paper studies the problem of identifying the contagion source when partial timestamps of a contagion process are available. We formulate the source localization problem as a ranking problem on graphs, where infected nodes are ranked according to their likelihood of being the source. Two ranking algorithms, cost-based ranking (CR) and tree-based ranking (TR), are proposed in this paper. Experimental evaluations with synthetic and real-world data show that our algorithms significantly improve the ranking accuracy compared with four existing algorithms.

cs.SI↗

arXiv2014

A Real-Time Detecting Algorithm for Tracking Community Structure of Dynamic Networks

In this paper a simple but efficient real-time detecting algorithm is proposed for tracking community structure of dynamic networks. Community structure is intuitively characterized as divisions of network nodes into subgroups, within which nodes are densely connected while between which they are sparsely connected. To evaluate the quality of community structure of a network, a metric called modularity is proposed and many algorithms are developed on optimizing it. However, most of the modularity based algorithms deal with static networks and cannot be performed frequently, due to their high computing complexity. In order to track the community structure of dynamic networks in a fine-grained way, we propose a modularity based algorithm that is incremental and has very low computing complexity. In our algorithm we adopt a two-step approach. Firstly we apply the algorithm of Blondel et al for detecting static communities to obtain an initial community structure. Then, apply our incremental updating strategies to track the dynamic communities. The performance of our algorithm is measured in terms of the modularity. We test the algorithm on tracking community structure of Enron Email and three other real world datasets. The experimental results show that our algorithm can keep track of community structure in time and outperform the well known CNM algorithm in terms of modularity.

cs.SI↗

arXiv2014

Centrosymmetric, Skew Centrosymmetric and Centrosymmetric Cauchy Tensors

Recently, Zhao and Yang introduced centrosymmetric tensors. In this paper, we further introduce skew centrosymmetric tensors and centrosymmetric Cauchy tensors, and discuss properties of these three classes of structured tensors. Some sufficient and necessary conditions for a tensor to be centrosymmetric or skew centrosymmetric are given. We show that, a general tensor can always be expressed as the sum of a centrosymmetric tensor and a skew centrosymmetric tensor. Some sufficient and necessary conditions for a Cauchy tensor to be centrosymmetric or skew centrosymmetric are also given. Spectral properties on H-eigenvalues and H-eigenvectors of centrosymmetric, skew centrosymmetric and centrosymmetric Cauchy tensors are discussed. Some further questions on these tensors are raised.

math.SP↗

arXiv2014

Realization of practical level current densities in Sr0.6K0.4Fe2As2 tape conductors for high-field applications

122 type pnictide superconductors are of particular interest for high-field applications because of their large upper critical fields Hc2 (> 100 T), low Hc2 anisotropy r (< 2), and high thin-film critical current densities Jc (> 1 MA/cm2 at 4.2 K). Successful magnet applications require fabrication of polycrystalline superconducting wires that exhibit large in-field Jc, which is limited by poor grain coupling and weak-link behavior at grain boundaries. Here we report our recent achievement in the developing Sr0.6K0.4Fe2As2 tapes with transport Jc up to 0.1 MA/cm2 at 10 T and 4.2 K. This value is by far the highest ever recorded for iron based superconducting wires and has surpassed the threshold for practical application for the first time. The synergy effects of enhanced grain connectivity, alleviation of the weak-link behavior at grain boundaries, and the strong intrinsic pinning characteristics led to the superior Jc performance exhibited in our samples. This advanced Jc result opens up the possibility for iron-pnictide superconducting wires to win the race in high-field magnet applications.

cond-mat.supr-con↗

arXiv2012

Nonparametric ROC Summary Statistics for Correlated Diagnostic Marker Data

We propose efficient nonparametric statistics to compare medical imaging modalities in multi-reader multi-test data and to compare markers in longitudinal ROC data. The proposed methods are based on the weighted area under the ROC curve which includes the area under the curve and the partial area under the curve as special cases. The methods maximize the local power for detecting the difference between imaging modalities. The asymptotic results of the proposed methods are developed under a complex correlation structure. Our simulation studies show that the proposed statistics result in much better powers than existing statistics. We applied the proposed statistics to an endometriosis diagnosis study.

stat.AP↗

arXiv2012

The nonlinear electromigration of analytes into confined spaces

We consider the problem of electromigration of a sample ion (analyte) within a uniform background electrolyte when the confining channel undergoes a sudden contraction. One example of such a situation arises in microfluidics in the electrokinetic injection of the analyte into a micro-capillary from a reservoir of much larger size. Here the sample concentration propagates as a wave driven by the electric field. The dynamics is governed by the Nerst-Planck-Poisson system of equations for ionic transport.A reduced one dimensional nonlinear equation describing the evolution of the sample concentration is derived.We integrate this equation numerically to obtain the evolution of the wave shape and determine how the the injected mass depends on the sample concentration in the reservoir.It is shown that due to the nonlinear coupling of the ionic concentrations and the electric field, the concentration of the injected sample could be substantially less than the concentration of the sample in the reservoir.

q-bio.QM↗

arXiv2012

Strongly nonlinear waves in capillary electrophoresis

In capillary electrophoresis, sample ions migrate along a micro-capillary filled with a background electrolyte under the influence of an applied electric field. If the sample concentration is sufficiently high, the electrical conductivity in the sample zone could differ significantly from the background.Under such conditions, the local migration velocity of sample ions becomes concentration dependent resulting in a nonlinear wave that exhibits shock like features. If the nonlinearity is weak, the sample concentration profile, under certain simplifying assumptions, can be shown to obey Burgers' equation (S. Ghosal and Z. Chen Bull. Math. Biol. 2010, 72(8), pg. 2047) which has an exact analytical solution for arbitrary initial condition.In this paper, we use a numerical method to study the problem in the more general case where the sample concentration is not small in comparison to the concentration of background ions. In the case of low concentrations, the numerical results agree with the weakly nonlinear theory presented earlier, but at high concentrations, the wave evolves in a way that is qualitatively different.

q-bio.QM↗

arXiv2012

A nonlinear equation for ionic diffusion in a strong binary electrolyte

The problem of the one dimensional electro-diffusion of ions in a strong binary electrolyte is considered. In such a system the solute dissociates completely into two species of ions with unlike charges. The mathematical description consists of a diffusion equation for each species augmented by transport due to a self consistent electrostatic field determined by the Poisson equation. This mathematical framework also describes other important problems in physics such as electron and hole diffusion across semi-conductor junctions and the diffusion of ions in plasmas. If concentrations do not vary appreciably over distances of the order of the Debye length, the Poisson equation can be replaced by the condition of local charge neutrality first introduced by Planck. It can then be shown that both species diffuse at the same rate with a common diffusivity that is intermediate between that of the slow and fast species (ambipolar diffusion). Here we derive a more general theory by exploiting the ratio of Debye length to a characteristic length scale as a small asymptotic parameter. It is shown that the concentration of either species may be described by a nonlinear integro-differential equation which replaces the classical linear equation for ambipolar diffusion but reduces to it in the appropriate limit. Through numerical integration of the full set of equations it is shown that this nonlinear equation provides a better approximation to the exact solution than the linear equation it replaces.

physics.chem-ph↗

arXiv2012

Nonlinear waves in capillary electrophoresis

Electrophoretic separation of a mixture of chemical species is a fundamental technique of great usefulness in biology, health care and forensics. In capillary electrophoresis the sample migrates in a microcapillary in the presence of a background electrolyte. When the ionic concentration of the sample is sufficiently high, the signal is known to exhibit features reminiscent of nonlinear waves including sharp concentration `shocks'.In this paper we consider a simplified model consisting of a single sample ion and a background electrolyte consisting of a single co-ion and a counterion in the absence of any processes that might change the ionization states of the constituents. If the ionic diffusivities are assumed to be the same for all constituents the concentration of sample ion is shown to obey a one dimensional advection diffusion equation with a concentration dependent advection velocity.If the analyte concentration is sufficiently low in a suitable non-dimensional sense, Burgers' equation is recovered, and thus, the time dependent problem is exactly solvable with arbitrary initial conditions. In the case of small diffusivity either a leading edge or trailing edge shock is formed depending on the electrophoretic mobility of the sample ion relative to the background ions. Analytical formulas are presented for the shape, width and migration velocity of the sample peak and it is shown that axial dispersion at long times may be characterized by an effective diffusivity that is exactly calculated. These results are consistent with known observations from physical and numerical simulation experiments.

q-bio.QM↗

arXiv2012

Electromigration dispersion in Capillary Electrophoresis

In a previous paper (S. Ghosal and Z. Chen Bull. Math. Biol. 2010, vol. 72, pg. 2047) it was shown that the evolution of the solute concentration in capillary electrophoresis is described by a nonlinear wave equation that reduced to Burger's equation if the nonlinearity was weak. It was assumed that only strong electrolytes (fully dissociated) were present. In the present paper it is shown that the same governing equation also describes the situation where the electrolytic buffer consists of a single weak acid (or base). A simple approximate formula is derived for the dimensionless peak variance which is shown to agree well with published experimental data.

physics.bio-ph↗

arXiv2010

On the Post-Peak Structural Response due to Softening with Localization

An analytical study is taken to investigate the relationship between material softening and structural softening through the use of a model problem in one dimension. With general nonlinear assumptions on the constitutive relations, it turns out that the governing equations can be viewed as a system of parametric equations, which couple the size effect and the nonlinear effect. Compared with the bilinear assumptions in previous literature, we find that the nonlinear assumptions herein capture more details in the post-peak structural response. After doing standard mathematical analysis to the nonlinear equations, we manage to derive necessary and sufficient conditions for the occurrence of four important post-peak cases, which are often observed in experiments. In particular, our analysis reveals that the mechanism of the snap-through phenomenon is due to the convexity change of the constitutive curve of the softening part. Mathematical examples are also given to illustrate the proposed procedures.

physics.bio-ph↗

arXiv2009

Ripple Texturing of Suspended Graphene Atomic Membranes

Graphene is the nature's thinnest elastic membrane, with exceptional mechanical and electrical properties. We report the direct observation and creation of one-dimensional (1D) and 2D periodic ripples in suspended graphene sheets, using spontaneously and thermally induced longitudinal strains on patterned substrates, with control over their orientations and wavelengths. We also provide the first measurement of graphene's thermal expansion coefficient, which is anomalously large and negative, ~ -7x10^-6 K^-1 at 300K. Our work enables novel strain-based engineering of graphene devices.

cond-mat.mes-hall↗

arXiv2008

On Constructing the Asymptotic Solutions for Phase Transitions in a Slender Cylinder Composed of a Compressible Hyperelastic Material with Clamped End Conditions

In this paper, we study phase transitions in a slender circular cylinder composed of a compressible hyperelastic material with a non-convex strain energy function. We aim to construct the asymptotic solutions based on an axisymmetrical three-dimensional setting and use the results to describe the key features (in particular, instability phenomena) observed in the experiments by others. The difficult problem of the solution bifurcations of the governing nonlinear partial differential equations (PDE's) is solved through a novel approach. By using a methodology involving coupled series-asymptotic expansions, we derive the normal form equation of the original complicated system of nonlinear PDE's. By writing the normal form equation into a first-order dynamical system and with a phase-plane analysis, we manage to deduce the global bifurcation properties and to solve the boundary-value problem analytically. The asymptotic solutions (including post-bifurcation solutions) in terms of integrals are obtained. The engineering stress-strain curve plotted from the asymptotic solutions can capture the key features of the curve measured in a few experiments (e.g., the stress drop, the stress plateau, and the small stress valley). It appears that the asymptotic solutions obtained shed certain light on the instability phenomena associated with phase transitions in a cylinder, in particular the role played by the radius-length ratio. Also, an important feature of this work is that we consider the clamped end conditions, which are more practical but rarely used in literature for phase transition problems.

physics.class-ph↗

arXiv2007

On Constructing the Analytical Solutions for Localizations in a Slender Cylinder Composed of an Incompressible Hyperelastic Material

In this paper, we study the localization phenomena in a slender cylinder composed of an incompressible hyperelastic material subjected to axial tension. We aim to construct the analytical solutions based on a three-dimensional setting and use the analytical results to describe the key features observed in the experiments by others. Using a novel approach of coupled series-asymptotic expansions, we derive the normal form equation of the original governing nonlinear partial differential equations. By writing the normal form equation into a first-order dynamical system and with the help of the phase plane, we manage to solve two boundary-value problems analytically. The explicit solution expressions (in terms of integrals) are obtained. By analyzing the solutions, we find that the width of the localization zone depends on the material parameters but remains almost unchanged for the same material in the post-peak region. Also, it is found that when the radius-length ratio is relatively small there is a snap-back phenomenon. These results are well in agreement with the experimental observations. Through an energy analysis, we also deduce the preferred configuration and give a prediction when a snap-through can happen. Finally, based on the maximum-energy-distortion theory, an analytical criterion for the onset of material failure is provided.

physics.class-ph↗