SearcharxivSearch

arXiv subjects

Zhenchao Wen

Publications and source records attributed to Zhenchao Wen.

At least 19 recordsLinked to original sources

Evidence for single variant in altermagnetic RuO2(101) thin films

Altermagnetism presents intriguing possibilities for spintronic devices due to its unique combination of strong spin-splitting and zero net magnetization. However, realizing its full potential hinges on fabricating single-variant altermagnetic thin films. In this work, we present definitive evidence for the formation of single-variant altermagnetic RuO2(101) thin films with fully epitaxial growth on Al2O3(1-102) r-plane substrates, confirmed through rigorous structural analyses using X-ray diffraction, atomic-resolution transmission electron microscopy and X-ray magnetic linear dichroism. The mutual correspondence of the occupancy of oxygen atoms on the surfaces of RuO2(101)[010] and Al2O3(1-102)[11-20] plays a decisive role in the formation of the single-variant RuO2, which is also supported by our first-principles density functional theory calculations. We further observed spin-splitting magnetoresistance in the single-variant RuO2(101)/CoFeB bilayers, highlighting the characteristic effect of single variant on spin transport. The demonstration of single-variant RuO2(101) films marks a significant advancement in the field of altermagnetism and paves the way for exploring their potential applications.

cond-mat.mtrl-sci

Fully epitaxial fcc(111) magnetic tunnel junctions with a Co90Fe10/MgAlO/Co90Fe10 structure

Magnetic tunnel junctions (MTJs) with bcc(001)-type structures such as Fe(001)/MgO(001)/Fe(001), have been widely used as the core of various spintronic devices such as magnetoresistive memories; however, the limited material selection of (001)-type MTJs hinders the further development of spintronic devices. Here, as an alternative to the (001)-type MTJs, an fcc(111)-type MTJ using a fully epitaxial CoFe/rock-salt MgAlO (MAO)/CoFe is explored to introduce close-packed lattice systems into MTJs. Using an atomically flat Ru(0001) epitaxial buffer layer, fcc(111) epitaxial growth of the CoFe/MAO/CoFe trilayer is achieved. Sharp CoFe(111)/MAO(111) interfaces are confirmed due to the introduction of periodic dislocations by forming a 5:6 in-plane lattice matching structure. The fabricated (111) MTJ exhibits a tunnel magnetoresistance ratio of 37% at room temperature (47% at 10 K). Symmetric differential conductance curves with respect to bias polarity are observed, indicating the achievement of nearly identical upper and lower MAO interface qualities. Despite the charge-uncompensated (111) orientation for a rock-salt-like MAO barrier, the achievement of flat, stable, and spin-polarized barrier interfaces opens a promising avenue for expanding the design of MTJ structures.

cond-mat.mtrl-sci

Observation of Fluctuation Spin Hall Effect in Antiferromagnet

The spin Hall effect (SHE) can generate a pure spin current by an electric current, which is promisingly used to electrically control magnetization. To reduce power consumption of this control, a giant spin Hall angle (SHA) in the SHE is desired in low-resistivity systems for practical applications. Here, critical spin fluctuation near the antiferromagnetic (AFM) phase-transition is proved as an effective mechanism to create an additional part of SHE, named as fluctuation spin Hall effect (FSHE). This FSHE enhances the SHA due to the AFM spin fluctuation between conduction electrons and local spins. We detect the FSHE with the inverse and direct spin Hall effect (ISHE and DSHE) set-up and their temperature (T) dependences in the Cr/MgO/Fe magnetic tunnel junctions (MTJs). The SHA is significantly enhanced when temperature is approached to the Néel temperature (T_N) and has a peak value of -0.34 at 200 K near T_N. This value is higher than the room-temperature value by 240% and comparable to that of heavy metals Ta and W. Furthermore, the spin Hall resistivity of Cr well fits the modeled T-dependence when T approaches T_N from low temperatures, implying the AFM spin fluctuation nature of strong SHA enhancement. Thus, this study demonstrates the critical spin fluctuation as a prospective way of increasing SHA and enriches the AFM material candidates for spin-orbitronic devices.

cond-mat.mes-hall

Giant oscillatory tunnel magnetoresistance in CoFe/MgO/CoFe(001) junctions

The tunnel magnetoresistance (TMR) effect observed in magnetic tunnel junctions (MTJs) is commonly used in many spintronic applications because the effect can easily convert from local magnetic states to electric signals in a wide range of device resistances. In this study, we demonstrated TMR ratios of up to 631% at room temperature (RT), which is two or more times larger than those used currently for magnetoresistive random access memory (MRAM) devices, using CoFe/MgO/CoFe(001) epitaxial MTJs. The TMR ratio increased up to 1143% at 10 K, which corresponds to an effective tunneling spin polarization of 0.923. The observed large TMR ratios resulted from the fine-tuning of atomic-scale structures of the MTJs, such as crystallographic orientations and MgO interface oxidation, in which the well-known Delta1 coherent tunneling mechanism for the giant TMR effect is expected to be pronounced. However, behavior that is not covered by the standard coherent tunneling theory was unexpectedly manifested; i.e., (i) TMR saturation at a thick MgO barrier region and (ii) enhanced TMR oscillation with a 0.32 nm period in MgO thickness. Particularly, the TMR oscillatory behavior dominates the transport in a wide range of MgO thicknesses; the peak-to-valley difference of the TMR oscillation exceeded 140% at RT, attributable to the appearance of large oscillatory components in resistance area product (RA). Further, we found that the oscillatory behaviors of the TMR ratio and RA survive, even under a +-1 V bias voltage application, indicating the robustness of the oscillation. Our demonstration of the giant RT-TMR ratio will be an essential step for establishing spintronic architectures, such as large-capacity MRAMs and spintronic artificial neural networks. More essentially, the present observations can trigger us to revisit the true TMR mechanism in crystalline MTJs.

cond-mat.mtrl-sci

Enhanced Tunnel magnetoresistance in Fe/Mg4Al-Ox/Fe(001) Magnetic Tunnel Junctions

Spinel MgAl2O4 and family oxides are emerging barrier materials useful for magnetic tunnel junctions (MTJs). We report large tunnel magnetoresistance (TMR) ratios up to 429% at room temperature (RT) and 1,034% at 10 K in a Fe/MgAl2O4/Fe(001)-based MTJ prepared using electron-beam evaporation of Mg4Al-Ox. Resistance oscillations with a MTJ barrier thickness of 0.3-nm were significantly enhanced compared to those of a Fe/MgO/Fe(001) MTJ, resulting in a large TMR oscillation peak-to-valley difference of 125% at RT. The differential conductance spectra were symmetric with bias polarity, and the spectrum in the parallel magnetization state at low temperature demonstrate significant peaks within broad local minima at |0.2-0.6| V, indicating improved barrier interfaces by the Mg4Al-Ox barrier. This study demonstrates that TMR ratios in Fe(001)-MTJs can still be improved.

cond-mat.mtrl-sci

Spin Hall effect in a spin-1 chiral semimetal

Spin-1 chiral semimetal is a new state of quantum matter hosting unconventional chiral fermions that extend beyond the common Dirac and Weyl fermions. B20-type CoSi is a prototypal material that accommodates such an exotic quasiparticle. To date, the spin transport properties in the spin-1 chiral semimetals, have not been explored yet. In this work, we fabricated B20-CoSi thin films on sapphire c-plane substrates by magnetron sputtering and studied the spin Hall effect (SHE) by combining experiments and first-principles calculations. The SHE of CoSi using CoSi/CoFeB/MgO heterostructures was investigated via spin Hall magnetoresistance and harmonic Hall measurements. First-principles calculations yield an intrinsic spin Hall conductivity (SHC) at the Fermi level that is consistent with the experiments and reveal its unique Fermi-energy dependence. Unlike the Dirac and Weyl fermion-mediated Hall conductivities that exhibit a peak-like structure centering around the topological node, SHC of B20-CoSi is odd and crosses zero at the node with two antisymmetric local extrema of opposite sign situated below and above in energy. Hybridization between Co d-Si p orbitals and spin-orbit coupling are essential for the SHC, despite the small (~1%) weight of Si p-orbital near the Fermi level. This work expands the horizon of topological spintronics and highlights the importance of Fermi-level tuning in order to fully exploit the topology of spin-1 chiral fermions for spin current generation.

cond-mat.mtrl-sci

Magnetization switching induced by spin-orbit torque from Co2MnGa magnetic Weyl semimetal thin films

This study reports the magnetization switching induced by spin-orbit torque (SOT) from the spin current generated in Co2MnGa magnetic Weyl semimetal (WSM) thin films. We deposited epitaxial Co2MnGa thin films with highly B2-ordered structure on MgO(001) substrates. The SOT was characterized by harmonic Hall measurements in a Co2MnGa/Ti/CoFeB heterostructure and a relatively large spin Hall efficiency of -7.8% was obtained.The SOT-induced magnetization switching of the perpendicularly magnetized CoFeB layer was further demonstrated using the structure. The symmetry of second harmonic signals, thickness dependence of spin Hall efficiency, and shift of anomalous Hall loops under applied currents were also investigated. This study not only contributes to the understanding of the mechanisms of spin-current generation from magnetic-WSM-based heterostructures, but also paves a way for the applications of magnetic WSMs in spintronic devices.

cond-mat.mtrl-sci

Exceeding 400% tunnel magnetoresistance at room temperature in epitaxial Fe/MgO/Fe(001) spin-valve-type magnetic tunnel junctions

Giant tunnel magnetoresistance (TMR) ratios of 417% at room temperature (RT) and 914% at 3 K were demonstrated in epitaxial Fe/MgO/Fe(001) exchanged-biased spin-valve magnetic tunnel junctions (MTJs) by tuning growth conditions for each layer, combining sputter deposition for the Fe layers, electron-beam evaporation of the MgO barrier, and barrier interface tuning. Clear TMR oscillation as a function of the MgO thickness with a large peak-to-valley difference of ~80% was observed when the layers were grown on a highly (001)-oriented Cr buffer layer. Specific features of the observed MTJs are symmetric differential conductance (dI/dV) spectra for the bias polarity and plateau-like deep local minima in dI/dV (parallel configuration) at |V| = 0.2~0.5 V. At 3K, fine structures with two dips emerge in the plateau-like dI/dV, reflecting highly coherent tunneling through the Fe/MgO/Fe. We also observed a 496% TMR ratio at RT by a 2.24-nm-thick-CoFe insertion at the bottom-Fe/MgO interface.

cond-mat.mtrl-sci

Voltage-controlled magnetic anisotropy under the electronic structure modulation in quantum wells

Voltage-controlled magnetic anisotropy (VCMA) offers an emerging approach to realize energy-efficient magnetization switching in spintronic devices such as magnetic random access memories (MRAMs). Here, we show that manipulating the condensed states, i.e., introducing quantum well (QW) can significantly influence the VCMA in a Cr/Fe-QW/MgAl2O4 based magnetic tunnel junction (MTJ). Only for the MTJ with an even number of Fe atomic layers, we observed a novel A-shaped VCMA curve for a particular QW state, where magnetic anisotropy energy (MAE) reaches a local maximum at zero bias and reduces when applying both positive and negative bias, i.e., a novel bi-polar VCMA effect. Our ab initio calculations demonstrate that the QW states give an additional contribution to perpendicular magnetic anisotropy (PMA), which can explain not only the A-shaped VCMA but also the Fe-layer-number parity dependence of VCMA. The present study suggests that the QW-modulated VCMA should open a new pathway to design VCMA-assisted MRAM.

cond-mat.mtrl-sci

Tunability of domain structure and magnonic spectra in antidot arrays of Heusler alloy

Materials suitable for magnonic crystals demand low magnetic damping and long spin wave (SW) propagation distance. In this context Co based Heusler compounds are ideal candidates for magnonic based applications. In this work, antidot arrays (with different shapes) of epitaxial $\mathrm{Co}_2\mathrm{Fe}_{0.4}\mathrm{Mn}_{0.6}\mathrm{Si}$ (CFMS) Heusler alloy thin films have been prepared using e-beam lithography and sputtering technique. Magneto-optic Kerr effect and ferromagnetic resonance analysis have confirmed the presence of dominant cubic and moderate uniaxial magnetic anisotropies in the thin films. Domain imaging via x-ray photoemission electron microscopy on the antidot arrays reveals chain like switching or correlated bigger domains for different shape of the antidots. Time-resolved MOKE microscopy has been performed to study the precessional dynamics and magnonic modes of the antidots with different shapes. We show that the optically induced spin-wave spectra in such antidot arrays can be tuned by changing the shape of the holes. The variation in internal field profiles, pinning energy barrier, and anisotropy modifies the spin-wave spectra dramatically within the antidot arrays with different shapes. We further show that by combining the magnetocrystalline anisotropy with the shape anisotropy, an extra degree of freedom can be achieved to control the magnonic modes in such antidot lattices.

cond-mat.mtrl-sci

Spin-charge conversion in NiMnSb Heusler alloy films

Half-metallic Heusler alloys are attracting considerable attention because of their unique half-metallic band structures which exhibit high spin polarization and yield huge magnetoresistance ratios. Besides serving as ferromagnetic electrodes, Heusler alloys also have the potential to host spin-charge conversion which has been recently demonstrated in other ferromagnetic metals. Here, we report on the spin-charge conversion effect in the prototypical Heusler alloy NiMnSb. Spin currents were injected from Y3Fe5O12 into NiMnSb films by spin pumping, and then the spin currents were converted to charge currents via spin-orbit interactions. Interestingly, an unusual charge signal was observed with a sign change at low temperature, which can be manipulated by film thickness and ordering structure. It is found that the spin-charge conversion has two contributions. First, the interfacial contribution causes a negative voltage signal, which is almost constant versus temperature. The second contribution is temperature dependent because it is dominated by minority states due to thermally excited magnons in the bulk part of the film. This work provides a pathway for the manipulation of spin-charge conversion in ferromagnetic metals by interface-bulk engineering for spintronic devices.

cond-mat.mtrl-sci

Anomaly in anomalous Nernst effect at low temperature for C1b-type NiMnSb half-Heusler alloy thin film

The anomaly in the anomalous Nernst effect (ANE) was observed for a C1b-type NiMnSb half-Heusler alloy thin film deposited on a MgO (001) substrate. The Nernst angle (θANE) showed maximum peak with decreasing temperature and reached 0.15 at 80 K, which is considered to be brought by the cross-over from half-metal to normal ferromagnet in NiMnSb at low temperature. This anomaly was also observed for the transport properties, that is, both the resistivity and the anomalous Hall resistivity in the same temperature range.

cond-mat.mes-hall

Tunable magnetization relaxation of Fe_{2}Cr_{1-x}Co_{x}Si half-metallic Heusler alloys by band structure engineering

We report a systematic investigation on the magnetization relaxation properties of iron-based half-metallic Heusler alloy Fe$_{2}$Cr$_{1-x}$Co_${x}$Si (FCCS) thin films using broadband angular-resolved ferromagnetic resonance. Band structure engineering through Co doping (x) demonstrated by first-principles calculations is shown to tune the intrinsic magnetic damping over an order of magnitude, namely 0.01-0.0008. Notably, the intrinsic damping constants for samples with high Co concentration are among the lowest reported for Heusler alloys and even comparable to magnetic insulator yttrium iron garnet. Furthermore, a significant reduction of both isotropic and anisotropic contributions of extrinsic damping of the FCCS alloys was found in the FCCS films with x=0.5-0.75, which is of particular importance for applications. These results demonstrate a practical recipe to tailor functional magnetization for Heusler alloy-based spintronics at room temperature

cond-mat.mtrl-sci

Nonlinear electric field effect on perpendicular magnetic anisotropy in Fe/MgO interfaces

The electric field effect on magnetic anisotropy was studied in an ultrathin Fe(001) monocrystalline layer sandwiched between Cr buffer and MgO tunnel barrier layers, mainly through post-annealing temperature and measurement temperature dependences. A large coefficient of the electric field effect of more than 200 fJ/Vm was observed in the negative range of electric field, as well as an areal energy density of perpendicular magnetic anisotropy (PMA) of around 600 uJ/m2. More interestingly, nonlinear behavior, giving rise to a local minimum around +100 mV/nm, was observed in the electric field dependence of magnetic anisotropy, being independent of the post-annealing and measurement temperatures. The insensitivity to both the interface conditions and the temperature of the system suggests that the nonlinear behavior is attributed to an intrinsic origin such as an inherent electronic structure in the Fe/MgO interface. The present study can contribute to the progress in theoretical studies, such as ab initio calculations, on the mechanism of the electric field effect on PMA.

cond-mat.mtrl-sci

Voltage control of magnetic anisotropy in epitaxial Ru/Co2FeAl/MgO heterostructures

Voltage control of magnetic anisotropy (VCMA) in magnetic heterostructures is a key technology for achieving energy-efficiency electronic devices with ultralow power consumption. Here, we report the first demonstration of the VCMA effect in novel epitaxial Ru/Co2FeAl(CFA)/MgO heterostructures with interfacial perpendicular magnetic anisotropy (PMA). Perpendicularly magnetized tunnel junctions with the structure of Ru/CFA/MgO were fabricated and exhibited an effective voltage control on switching fields for the CFA free layer. A large VCMA coefficient of 108 (139) fJ/Vm for the CFA film was achieved at room temperature (4 K). The interfacial stability in the heterostructure was confirmed by repeating measurements. Temperature dependences of both the interfacial PMA and the VCMA effect were also investigated. It is found that the temperature dependences follow power laws of the saturation magnetization with an exponent of ~2. The significant VCMA effect observed in this work indicates that the Ru/CFA/MgO heterostructure could be one of the promising candidates for spintronic devices with voltage control.

cond-mat.mtrl-sci

Interdiffusion in epitaxial ultrathin Co2FeAl/MgO heterostructures with interface-induced perpendicular magnetic anisotropy

The structures of epitaxial ultrathin Co2FeAl/MgO(001) heterostructures relating to the interface-induced perpendicular magnetic anisotropy (PMA) were investigated using scanning transmission electron microscopy, energy dispersive x-ray spectroscopy, and x-ray magnetic circular dichroism. We found that Al atoms from the Co2FeAl layer significantly interdiffuse into MgO, forming an Al-deficient Co-Fe-Al/Mg-Al-O structure near the Co2FeAl/MgO interface. This atomic replacement may play an additional role for enhancing PMA, which is consistent with the observed large perpendicular orbital magnetic moments of Fe atoms at the interface. This work suggests that control of interdiffusion at ferromanget/barrier interfaces is critical for designing an interface-induced PMA system.

cond-mat.mtrl-sci

Spin-orbit torque in Cr/CoFeAl/MgO and Ru/CoFeAl/MgO epitaxial magnetic heterostructures

We study the spin-orbit torque (SOT) effective fields in Cr/CoFeAl/MgO and Ru/CoFeAl/MgO magnetic heterostructures using the adiabatic harmonic Hall measurement. High-quality perpendicular-magnetic-anisotropy CoFeAl layers were grown on Cr and Ru layers. The magnitudes of the SOT effective fields were found to significantly depend on the underlayer material (Cr or Ru) as well as their thicknesses. The damping-like longitudinal effective field (ΔH_L) increases with increasing underlayer thickness for all heterostructures. In contrast, the field-like transverse effective field (ΔH_T) increases with increasing Ru thickness while it is almost constant or slightly decreases with increasing Cr thickness. The sign of ΔH_L observed in the Cr-underlayer devices is opposite from that in the Ru-underlayer devices while ΔH_T shows the same sign with a small magnitude. The opposite directions of ΔHL indicate that the signs of spin Hall angle in Cr and Ru are opposite, which are in good agreement with theoretical predictions. These results show sizable contribution from SOT even for elements with small spin orbit coupling such as 3d Cr and 4d Ru.

cond-mat.mtrl-sci

A 4-fold-symmetry hexagonal ruthenium for magnetic heterostructures exhibiting enhanced perpendicular magnetic anisotropy and tunnel magnetoresistance

An unusual crystallographic orientation of hexagonal Ru with a 4-fold symmetry emerging in epitaxial MgO/Ru/Co2FeAl/MgO heterostructures is reported, in which an approximately Ru(02-23) growth attributes to the lattice matching among MgO, Ru, and Co2FeAl. Perpendicular magnetic anisotropy of the Co2FeAl/MgO interface is substantially enhanced as compared with those with a Cr(001) layer. The MTJs incorporating this structure gave rise to the largest tunnel magnetoresistance for perpendicular MTJs using low damping Heusler alloys. The 4-fold-symmetry hexagonal Ru arises from an epitaxial growth with an unprecedentedly high crystal index, opening a unique pathway for the development of perpendicular anisotropy films of cubic and tetragonal ferromagnetic alloys.

cond-mat.mtrl-sci