Searcharxiv⌕ Search

arXiv subjects

Zhenzhen Kong

Publications and source records attributed to Zhenzhen Kong.

6 recordsLinked to original sources

Industrial RPCVD growth of high-purity 28Si epilayers with 29Si content below 30 ppm for high-fidelity electron spin qubits

Silicon quantum-dot spin qubits are among the most promising routes to large-scale quantum computation, but the residual 29Si nuclear spins in natural silicon impose a hyperfine dephasing limit that must be overcome by isotopic purification. Here, we report the epitaxial growth of high-purity 28Si on float-zone silicon using an industrial reduced-pressure chemical vapor deposition (RPCVD) system. Secondary-ion mass spectrometry (SIMS) confirms an 28Si isotopic purity of 99.997%, with the 29Si concentration below 30 ppm. Through a systematic vacuum annealing matrix (850-1150 C), combined with atomic force microscopy and SIMS, we investigate the defect-mediated decomposition of the native oxide and the injection of non-equilibrium vacancies. We identify a thermal-budget window below 950 C within which the thin-layer structure of 28Si remains intact. At 1.5 K, magnetotransport measurements reveal a peak Hall mobility of 12,858 cm^2 V^-1 s^-1 and a quantum scattering lifetime of 0.659 ps, corresponding to a single-particle level broadening of 499 micro-eV. A double quantum dot fabricated on this platform exhibits a T2* of 0.62 us, a Hahn-echo coherence time of 28.8 us, and single-qubit gate fidelities of up to 99.9% measured by randomized benchmarking. Our results establish industrial RPCVD as a promising route toward high-coherence, high-fidelity silicon spin qubits.

cond-mat.mes-hall↗

In-plane optimal qubit operation with control fidelities exceeding 99 %

Hole spin qubits based on semiconductor quantum dots are promising for building future large-scale quantum computers owing to their all-electrical manipulation. However, abundant physical mechanisms of valence band holes lead to anisotropic qubit properties. There is an opportunity to prolong the coherence time and achieve high-fidelity qubit manipulations. Here, we report a single-hole spin qubit in a planar germanium quantum dot and investigate its anisotropic susceptibility to charge noise under an in-plane magnetic field. By correlating the longitudinal spin-electric susceptibility with qubit coherence and control performance, we identify an optimal operating point where the sensitivity to charge noise is minimized. We find that optimizing the magnetic-field orientation reduces the spin-electric susceptibility, resulting in a five-fold enhancement of the Hahn-echo coherence time and a nearly tenfold suppression of control infidelity. At the optimal operating point, gate set tomography demonstrates the maximum gate fidelity of 99.82 %. Our finding enhances the prospects of hole spin qubits for scalable quantum information processing.

quant-ph↗

High-fidelity geometric quantum gates exceeding 99.9% in germanium quantum dots

Achieving high-fidelity and robust qubit manipulations is a crucial requirement for realizing faulttolerant quantum computation. Here, we demonstrate a single-hole spin qubit in a germanium quantum dot and characterize its control fidelity using gate set tomography. The maximum control fidelities reach 97.48%, 99.81%, 99.88% for the I, X/2 and Y /2 gate, respectively. These results reveal that off-resonance noise during consecutive I gates in gate set tomography sequences severely limits qubit performance. Therefore, we introduce geometric quantum computation to realize noiseresilient qubit manipulation. The geometric gate control fidelities remain above 99% across a wide range of Rabi frequencies. The maximum fidelity surpasses 99.9%. Furthermore, the fidelities of geometric X/2 and Y /2 (I) gates exceed 99% even when detuning the microwave frequency by +-2.5 MHz (+-1.2 MHz), highlighting the noise-resilient feature. These results demonstrate that geometric quantum computation is a potential method for achieving high-fidelity qubit manipulation reproducibly in semiconductor quantum computation.

quant-ph↗

High Mobility SiGe/Ge 2DHG Heterostructure Quantum Wells for Semiconductor Hole Spin Qubits

Strong spin-orbit coupling and relatively weak hyperfine interactions make germanium hole spin qubits a promising candidate for semiconductor quantum processors. The two-dimensional hole gas structure of strained Ge quantum wells serves as the primary material platform for spin hole qubits.A low disorder material environment is essential for this process. In this work, we fabricated a Ge/SiGe heterojunction with a 60 nm buried quantum well layer on a Si substrate using reduced pressure chemical vapor deposition technology. At a temperature of 16 mK, when the carrier density is 1.87*10^11/cm2, we obtained a mobility as high as 308.64*10^4cm2/Vs. Concurrently, double quantum dot and planar germanium coupling with microwave cavities were also successfully achieved.This fully demonstrates that this structure can be used for the preparation of higher-performance hole spin qubits.

cond-mat.mes-hall↗

Undoped Strained Ge Quantum Well with Ultrahigh Mobility Grown by Reduce Pressure Chemical Vapor Deposition

We fabricate an undoped Ge quantum well under 30 nm Ge0.8Si0.2 shallow barrier with reverse grading technology. The under barrier is deposited by Ge0.8Si0.2 followed by Ge0.9Si0.1 so that the variation of Ge content forms a sharp interface which can suppress the threading dislocation density penetrating into undoped Ge quantum well. And the Ge0.8Si0.2 barrier introduces enough in-plane parallel strain -0.41% in the Ge quantum well. The heterostructure field-effect transistors with a shallow buried channel get a high two-dimensional hole gas (2DHG) mobility over 2E6 cm2/Vs at a low percolation density of 2.51 E-11 cm2. We also discover a tunable fractional quantum Hall effect at high densities and high magnetic fields. This approach defines strained germanium as providing the material basis for tuning the spin-orbit coupling strength for fast and coherent quantum computation.

cond-mat.mes-hall↗

A Study of Selectively Digital Etching Silicon-Germanium with Nitric and Hydrofluoric Acids

A digital etching method was proposed to achieve excellent control of etching depth. The digital etching characteristics of p+ Si and Si0.7Ge0.3 using the combinations of HNO3 oxidation and BOE oxide removal processes were studied. Experiments showed that oxidation saturates with time due to low activation energy. A physical model was presented to describe the wet oxidation process with nitric acid. The model was calibrated with experimental data and the oxidation saturation time, final oxide thickness, and selectivity between Si0.7Ge0.3 and p+ Si were obtained. The digital etch of laminated Si0.7Ge0.3/p+ Si was also investigated. The depth of the tunnels formed by etching SiGe layers between two Si layers was found in proportion to digital etching cycles. And oxidation would also saturate and the saturated relative etched amount per cycle (REPC) was 0.5 nm (4 monolayers). A corrected selectivity calculation formula was presented. The oxidation model was also calibrated with Si0.7Ge0.3/p+ Si stacks, and selectivity from model was the same with the corrected formula. The model can also be used to analyze process variations and repeatability. And it could act as a guidance for experiment design. Selectivity and repeatability should make a trade-off.

physics.app-ph↗