Searcharxiv⌕ Search

arXiv subjects

Zhiyong Feng

Publications and source records attributed to Zhiyong Feng.

At least 145 records · Page 8Linked to original sources

Dual Identities Enabled Low-Latency Visual Networking for UAV Emergency Communication

The Unmanned Aerial Vehicle (UAV) swarm networks will play a crucial role in the B5G/6G network thanks to its appealing features, such as wide coverage and on-demand deployment. Emergency communication (EC) is essential to promptly inform UAVs of potential danger to avoid accidents, whereas the conventional communication-only feedback-based methods, which separate the digital and physical identities (DPI), bring intolerable latency and disturb the unintended receivers. In this paper, we present a novel DPI-Mapping solution to match the identities (IDs) of UAVs from dual domains for visual networking, which is the first solution that enables UAVs to communicate promptly with what they see without the tedious exchange of beacons. The IDs are distinguished dynamically by defining feature similarity, and the asymmetric IDs from different domains are matched via the proposed bio-inspired matching algorithm. We also consider Kalman filtering to combine the IDs and predict the states for accurate mapping. Experiment results show that the DPI-Mapping reduces individual inaccuracy of features and significantly outperforms the conventional broadcast-based and feedback-based methods in EC latency. Furthermore, it also reduces the disturbing messages without sacrificing the hit rate.

cs.NI↗

Energy-Efficient MIMO Integrated Sensing and Communications with On-off Non-transmission Power

This paper investigates the energy efficiency of a multiple-input multiple-output (MIMO) integrated sensing and communications (ISAC) system, in which one multi-antenna base station (BS) transmits unified ISAC signals to a multi-antenna communication user (CU) and at the same time use the echo signals to estimate an extended target. We focus on one particular ISAC transmission block and take into account the practical on-off non-transmission power at the BS. Under this setup, we minimize the energy consumption at the BS while ensuring a minimum average data rate requirement for communication and a maximum Cramér-Rao bound (CRB) requirement for target estimation, by jointly optimizing the transmit covariance matrix and the ``on'' duration for active transmission. We obtain the optimal solution to the rate-and-CRB-constrained energy minimization problem in a semi-closed form. Interestingly, the obtained optimal solution is shown to unify the spectrum-efficient and energy-efficient communications and sensing designs. In particular, for the special MIMO sensing case with rate constraint inactive, the optimal solution follows the isotropic transmission with shortest ``on'' duration, in which the BS radiates the required sensing energy by using sufficiently high power over the shortest duration. For the general ISAC case, the optimal transmit covariance solution is of full rank and follows the eigenmode transmission based on the communication channel, while the optimal ``on'' duration is determined based on both the rate and CRB constraints. Numerical results show that the proposed ISAC design achieves significantly reduced energy consumption as compared to the benchmark schemes based on isotropic transmission, always-on transmission, and sensing or communications only designs, especially when the rate and CRB constraints become stringent.

cs.IT↗

Kalman Filter-based Sensing in Communication Systems with Clock Asynchronism

In this paper, we propose a novel Kalman Filter (KF)-based uplink (UL) joint communication and sensing (JCAS) scheme, which can significantly reduce the range and location estimation errors due to the clock asynchronism between the base station (BS) and user equipment (UE). Clock asynchronism causes time-varying time offset (TO) and carrier frequency offset (CFO), leading to major challenges in uplink sensing. Unlike existing technologies, our scheme does not require knowing the location of the UE in advance, and retains the linearity of the sensing parameter estimation problem. We first estimate the angle-of-arrivals (AoAs) of multipaths and use them to spatially filter the CSI. Then, we propose a KF-based CSI enhancer that exploits the estimation of Doppler with CFO as the prior information to significantly suppress the time-varying noise-like TO terms in spatially filtered CSIs. Subsequently, we can estimate the accurate ranges of UE and the scatterers based on the KF-enhanced CSI. Finally, we identify the UE's AoA and range estimation and locate UE, then locate the dumb scatterers using the bi-static system. Simulation results validate the proposed scheme. The localization root mean square error of the proposed method is about 20 dB lower than the benchmarking scheme.

cs.IT↗

Complex CNN CSI Enhancer for Integrated Sensing and Communications

In this paper, we propose a novel complex convolutional neural network (CNN) CSI enhancer for integrated sensing and communications (ISAC), which exploits the correlation between the sensing parameters (such as angle-of-arrival and range) and the channel state information (CSI) to significantly improve the CSI estimation accuracy and further enhance the sensing accuracy. Within the CNN CSI enhancer, we use the complex-valued computation layers to form the CNN, which maintains the phase information of CSI. We also transform the CSI into the sparse angle-delay domain, leading to heatmap images with prominent peaks that can be efficiently processed by CNN. Based on the enhanced CSI outputs, we further propose a novel biased fast Fourier transform (FFT)-based sensing scheme for improving the range sensing accuracy, by artificially introducing phase biasing terms. Extensive simulation results show that the ISAC complex CNN CSI enhancer can converge within 30 training epochs. The normalized mean square error (NMSE) of its CSI estimates is about 17 dB lower than that of the linear minimum mean square error (LMMSE) estimator, and the bit error rate (BER) of demodulation using the enhanced CSI estimation approaches that with perfect CSI. Finally, the range estimation MSE of the proposed biased FFT-based sensing method approaches that of the subspace-based sensing method, at a much lower complexity.

cs.IT↗

Throughput of Hybrid UAV Networks with Scale-Free Topology

Unmanned Aerial Vehicles (UAVs) hold great potential to support a wide range of applications due to the high maneuverability and flexibility. Compared with single UAV, UAV swarm carries out tasks efficiently in harsh environment, where the network resilience is of vital importance to UAV swarm. The network topology has a fundamental impact on the resilience of UAV network. It is discovered that scale-free network topology, as a topology that exists widely in nature, has the ability to enhance the network resilience. Besides, increasing network throughput can enhance the efficiency of information interaction, improving the network resilience. Facing these facts, this paper studies the throughput of UAV Network with scale-free topology. Introducing the hybrid network structure combining both ad hoc transmission mode and cellular transmission mode into UAV Network, the throughput of UAV Network is improved compared with that of pure ad hoc UAV network. Furthermore, this work also investigates the optimal setting of the hop threshold for the selection of ad hoc or cellular transmission mode. It is discovered that the optimal hop threshold is related with the number of UAVs and the parameters of scale-free topology. This paper may motivate the application of hybrid network structure into UAV Network.

cs.IT↗

Spectrum Sharing between High Altitude Platform Network and Terrestrial Network: Modeling and Performance Analysis

Achieving seamless global coverage is one of the ultimate goals of space-air-ground integrated network, as a part of which High Altitude Platform (HAP) network can provide wide-area coverage. However, deploying a large number of HAPs will lead to severe congestion of existing frequency bands. Spectrum sharing improves spectrum utilization. The coverage performance improvement and interference caused by spectrum sharing need to be investigated. To this end, this paper analyzes the performance of spectrum sharing between HAP network and terrestrial network. We firstly generalize the Poisson Point Process (PPP) to curves, surfaces and manifolds to model the distribution of terrestrial Base Stations (BSs) and HAPs. Then, the closed-form expressions for coverage probability of HAP network and terrestrial network are derived based on differential geometry and stochastic geometry. We verify the accuracy of closed-form expressions by Monte Carlo simulation. The results show that HAP network has less interference to terrestrial network. Low height and suitable deployment density can improve the coverage probability and transmission capacity of HAP network.

cs.IT↗

Iterative Signal Processing for Integrated Sensing and Communication Systems

Integrated sensing and communication (ISAC), with sensing and communication sharing the same wireless resources and hardware, has the advantages of high spectrum efficiency and low hardware cost, which is regarded as one of the key technologies of the fifth generation advanced (5G-A) and sixth generation (6G) mobile communication systems. ISAC has the potential to be applied in the intelligent applications requiring both communication and high accurate sensing capabilities. The fundamental challenges of ISAC system are the ISAC signal design and ISAC signal processing. However, the existing ISAC signal has low anti-noise capability. And the existing ISAC signal processing algorithms have the disadvantages of quantization errors and high complexity, resulting in large energy consumption. In this paper, phase coding is applied in ISAC signal design to improve the anti-noise performance of ISAC signal. Then, the effect of phase coding method on improving the sensing accuracy is analyzed. In order to improve the sensing accuracy with low-complexity algorithm, the iterative ISAC signal processing methods are proposed. The proposed methods improve the sensing accuracy with low computational complexity, realizing energy efficient ISAC signal processing. Taking the scenarios of short distance and long distance sensing into account, the iterative two-dimensional (2D) fast Fourier transform (FFT) and iterative cyclic cross-correlation (CC) methods are proposed, respectively, realizing high sensing accuracy and low computational complexity. Finally, the feasibility of the proposed ISAC signal processing methods are verified by simulation results.

eess.SP↗

UAV-Enabled Integrated Sensing and Communication: Opportunities and Challenges

Unmanned aerial vehicle (UAV)-enabled integrated sensing and communication (ISAC) has attracted growing research interests in the context of sixth-generation (6G) wireless networks, in which UAVs will be exploited as aerial wireless platforms to provide better coverage and enhanced sensing and communication (S&C) services. However, due to the UAVs' size, weight, and power (SWAP) constraints, controllable mobility, and line-of-sight (LoS) air-ground channels, UAV-enabled ISAC introduces both new opportunities and challenges. This article provides an overview of UAV-enabled ISAC, and proposes various solutions for optimizing the S&C performance. In particular, we first introduce UAV-enabled joint S&C, and discuss UAV motion control, wireless resource allocation, and interference management for the cases of single and multiple UAVs. Then, we present two application scenarios for exploiting the synergy between S&C, namely sensing-assisted UAV communication and communication-assisted UAV sensing. Finally, we highlight several interesting research directions to guide and motivate future work.

cs.IT↗

Downlink and Uplink Cooperative Joint Communication and Sensing

Downlink (DL) and uplink (UL) joint communication and sensing (JCAS) technologies have been individually studied for realizing sensing using DL and UL communication signals, respectively. Since the spatial environment and JCAS channels in the consecutive DL and UL JCAS time slots are generally unchanged, DL and UL JCAS may be jointly designed to achieve better sensing performance. In this paper, we propose a novel DL and UL cooperative (DUC) JCAS scheme, including a unified multiple signal classification (MUSIC)-based JCAS sensing scheme for both DL and UL JCAS and a DUC JCAS fusion method. The unified MUSIC JCAS sensing scheme can accurately estimate AoA, range, and Doppler based on a unified MUSIC-based sensing module. The DUC JCAS fusion method can distinguish between the sensing results of the communication user and other dumb targets. Moreover, by exploiting the channel reciprocity, it can also improve the sensing and channel state information (CSI) estimation accuracy. Extensive simulation results validate the proposed DUC JCAS scheme. It is shown that the minimum location and velocity estimation mean square errors of the proposed DUC JCAS scheme are about 20 dB lower than those of the state-of-the-art separated DL and UL JCAS schemes.

cs.IT↗

Sensing Performance of Cooperative Joint Sensing-Communication UAV Network

We propose a novel cooperative joint sensing-communication (JSC) unmanned aerial vehicle (UAV) network that can achieve downward-looking detection and transmit detection data simultaneously using the same time and frequency resources by exploiting the beam sharing scheme. The UAV network consists of a UAV that works as a fusion center (FCUAV) and multiple subordinate UAVs (SU). All UAVs fly at the fixed height. FCUAV integrates the sensing data of network and carries out downward-looking detection. SUs carry out downward-looking detection and transmit the sensing data to FCUAV. To achieve the beam sharing scheme, each UAV is equipped with a novel JSC antenna array that is composed of both the sensing subarray (SenA) and the communication subarray (ComA) in order to generate the sensing beam (SenB) and the communication beam (ComB) for detection and communication, respectively. SenB and ComB of each UAV share a total amount of radio power. Because of the spatial orthogonality of communication and sensing, SenB and ComB can be easily formed orthogonally. The upper bound of average cooperative sensing area (UB-ACSA) is defined as the metric to measure the sensing performance, which is related to the mutual sensing interference and the communication capacity. Numerical simulations prove the validity of the theoretical expressions for UB-ACSA of the network. The optimal number of UAVs and the optimal SenB power are identified under the total power constraint.

cs.IT↗

Code-Division OFDM Joint Communication and Sensing System for 6G Machine-type Communication

The joint communication and sensing (JCS) system can provide higher spectrum efficiency and load-saving for 6G machine-type communication (MTC) applications by merging necessary communication and sensing abilities with unified spectrum and transceivers. In order to suppress the mutual interference between the communication and radar sensing signals to improve the communication reliability and radar sensing accuracy, we propose a novel code-division orthogonal frequency division multiplex (CD-OFDM) JCS MTC system, where MTC users can simultaneously and continuously conduct communication and sensing with each other. {\color{black} We propose a novel CD-OFDM JCS signal and corresponding successive-interference-cancellation (SIC) based signal processing technique that obtains code-division multiplex (CDM) gain, which is compatible with the prevalent orthogonal frequency division multiplex (OFDM) communication system.} To model the unified JCS signal transmission and reception process, we propose a novel unified JCS channel model. Finally, the simulation and numerical results are shown to verify the feasibility of the CD-OFDM JCS MTC system {\color{black} and the error propagation performance}. We show that the CD-OFDM JCS MTC system can achieve not only more reliable communication but also comparably robust radar sensing compared with the precedent OFDM JCS system, especially in low signal-to-interference-and-noise ratio (SINR) regime.

cs.IT↗

A Dual-Cluster-Head Based Medium Access Control for Large-Scale UAV Ad-Hoc Networks

Unmanned Aerial Vehicle (UAV) ad hoc network has achieved significant growth for its flexibility, extensibility, and high deployability in recent years. The application of clustering scheme for UAV ad hoc network is imperative to enhance the performance of throughput and energy efficiency. In conventional clustering scheme, a single cluster head (CH) is always assigned in each cluster. However, this method has some weaknesses such as overload and premature death of CH when the number of UAVs increased. In order to solve this problem, we propose a dual-cluster-head based medium access control (DCHMAC) scheme for large-scale UAV networks. In DCHMAC, two CHs are elected to manage resource allocation and data forwarding cooperatively. Specifically, two CHs work on different channels. One of CH is used for intra-cluster communication and the other one is for inter-cluster communication. A Markov chain model is developed to analyse the throughput of the network. Simulation result shows that compared with FM-MAC (flying ad hoc networks multi-channel MAC,FM-MAC), DCHMAC improves the throughput by approximately 20%-50% and prolongs the network lifetime by approximately 40%.

cs.NI↗

Joint Communication, Sensing and Computation enabled 6G Intelligent Machine System

With the rapid development of the smart city, high-level autonomous driving, intelligent manufacturing, and etc., the stringent industrial-level requirements of the extremely low latency and high reliability for communication and new trends for sub-centimeter sensing have transcended the abilities of 5G and call for the development of 6G. Based on analyzing the function design of the communication, sensing and the emerging intelligent computation systems, we propose the joint communication, sensing and computation (JCSC) framework for 6G intelligent machine-type communication (IMTC) network to realize low latency and high reliability of communication, highly accurate sensing and fast environment adaption. In the proposed JCSC framework, the communication, sensing and computation abilities cooperate to benefit each other by utilizing the unified hardware, resource and protocol design. Sensing information is exploited as priori information to enhance the reliability and latency performance of wireless communication and to optimize the resource utilization of the communication network, which further improves the distributed computation and cooperative sensing ability. We propose the promising enabling technologies such as joint communication and sensing (JCS) technique, JCSC wireless networking techniques and intelligent computation techniques. We also summarize the challenges to achieve the JCSC framework. Then, we introduce the intelligent flexible manufacturing as a typical use case of the IMTC with JCSC framework, where the enabling technologies are deployed. Finally, we present the simulation results to prove the feasibility of the JCSC framework by evaluating the JCS waveform, the JCSC enabled neighbor discovery (ND) and medium access control (MAC).

cs.NI↗

Learning Disentangled Semantic Representations for Zero-Shot Cross-Lingual Transfer in Multilingual Machine Reading Comprehension

Multilingual pre-trained models are able to zero-shot transfer knowledge from rich-resource to low-resource languages in machine reading comprehension (MRC). However, inherent linguistic discrepancies in different languages could make answer spans predicted by zero-shot transfer violate syntactic constraints of the target language. In this paper, we propose a novel multilingual MRC framework equipped with a Siamese Semantic Disentanglement Model (SSDM) to disassociate semantics from syntax in representations learned by multilingual pre-trained models. To explicitly transfer only semantic knowledge to the target language, we propose two groups of losses tailored for semantic and syntactic encoding and disentanglement. Experimental results on three multilingual MRC datasets (i.e., XQuAD, MLQA, and TyDi QA) demonstrate the effectiveness of our proposed approach over models based on mBERT and XLM-100. Code is available at:https://github.com/wulinjuan/SSDM_MRC.

cs.CL↗

5G PRS-Based Sensing: A Sensing Reference Signal Approach for Joint Sensing and Communication System

The emerging joint sensing and communication (JSC) technology is expected to support new applications and services, such as autonomous driving and extended reality (XR), in the future wireless communication systems. Pilot (or reference) signals in wireless communications usually have good passive detection performance, strong anti-noise capability and good auto-correlation characteristics, hence they bear the potential for applying in radar sensing. In this paper, we investigate how to apply the positioning reference signal (PRS) of the 5th generation (5G) mobile communications in radar sensing. This approach has the unique benefit of compatibility with the most advanced mobile communication system available so far. Thus, the PRS can be regarded as a sensing reference signal to simultaneously realize the functions of radar sensing, communication and positioning in a convenient manner. Firstly, we propose a PRS based radar sensing scheme and analyze its range and velocity estimation performance, based on which we propose a method that improves the accuracy of velocity estimation by using multiple frames. Furthermore, the Cramer-Rao lower bound (CRLB) of the range and velocity estimation for PRS based radar sensing and the CRLB of the range estimation for PRS based positioning are derived. Our analysis and simulation results demonstrate the feasibility and superiority of PRS over other pilot signals in radar sensing. Finally, some suggestions for the future 5G-Advanced and 6th generation (6G) frame structure design containing the sensing reference signal are derived based on our study.

eess.SP↗

UAV Assisted Data Collection for Internet of Things: A Survey

Thanks to the advantages of flexible deployment and high mobility, unmanned aerial vehicles (UAVs) have been widely applied in the areas of disaster management, agricultural plant protection, environment monitoring and so on. With the development of UAV and sensor technologies, UAV assisted data collection for Internet of Things (IoT) has attracted increasing attentions. In this article, the scenarios and key technologies of UAV assisted data collection are comprehensively reviewed. First, we present the system model including the network model and mathematical model of UAV assisted data collection for IoT. Then, we review the key technologies including clustering of sensors, UAV data collection mode as well as joint path planning and resource allocation. Finally, the open problems are discussed from the perspectives of efficient multiple access as well as joint sensing and data collection. This article hopefully provides some guidelines and insights for researchers in the area of UAV assisted data collection for IoT.

cs.RO↗

Concurrent Downlink and Uplink Joint Communication and Sensing for 6G Networks

Joint communication and sensing (JCAS) is a promising technology for 6th Generation (6G) mobile networks, such as intelligent vehicular networks, intelligent manufacturing, and so on. Equipped with two spatially separated antenna arrays, the base station (BS) can perform downlink active JCAS in a mono-static setup. This paper proposes a Concurrent Downlink and Uplink (CDU) JCAS system where the BS can use the echo of transmitted dedicated signals for sensing in the uplink timeslot, while performing reliable uplink communication. A novel successive interference cancellation-based CDU JCAS processing method is proposed to enable the estimation of uplink communication symbols and downlink sensing parameters. Extensive simulation results verify the feasibility of the CDU JCAS system, showing a performance improvement of more than 10 dB compared to traditional JCAS methods while maintaining reliable uplink communication.

cs.IT↗

Sensing-aided Uplink Channel Estimation for Joint Communication and Sensing

The joint communication and sensing (JCAS) technique has drawn great attention due to its high spectrum efficiency by using the same transmit signal for both communication and sensing. Exploiting the correlation between the uplink (UL) channel and the sensing results, we propose a sensing-aided Kalman filter (SAKF)-based channel state information (CSI) estimation method for UL JCAS, which exploits the angle-of-arrival (AoA) estimation to improve the CSI estimation accuracy. A Kalman filter (KF)-based CSI enhancement method is proposed to refine the least-square CSI estimation by exploiting the estimated AoA as the prior information. Simulation results show that the bit error rates (BER) of UL communication using the proposed SAKF-based CSI estimation method approach those using the minimum mean square error (MMSE) method, while at significantly reduced complexity.

cs.IT↗