Searcharxiv⌕ Search

arXiv subjects

Zhiyong Feng

Publications and source records attributed to Zhiyong Feng.

At least 163 records · Page 9Linked to original sources

Multiple Signal Classification Based Joint Communication and Sensing System

Joint communication and sensing (JCS) has become a promising technology for mobile networks because of its higher spectrum and energy efficiency. Up to now, the prevalent fast Fourier transform (FFT)-based sensing method for mobile JCS networks is on-grid based, and the grid interval determines the resolution. Because the mobile network usually has limited consecutive OFDM symbols in a downlink (DL) time slot, the sensing accuracy is restricted by the limited resolution, especially for velocity estimation. In this paper, we propose a multiple signal classification (MUSIC)-based JCS system that can achieve higher sensing accuracy for the angle of arrival, range, and velocity estimation, compared with the traditional FFT-based JCS method. We further propose a JCS channel state information (CSI) enhancement method by leveraging the JCS sensing results. Finally, we derive a theoretical lower bound for sensing mean square error (MSE) by using perturbation analysis. Simulation results show that in terms of the sensing MSE performance, the proposed MUSIC-based JCS outperforms the FFT-based one by more than 20 dB. Moreover, the bit error rate (BER) of communication demodulation using the proposed JCS CSI enhancement method is significantly reduced compared with communication using the originally estimated CSI.

cs.IT↗

Performance of Cooperative Detection in Joint Communication-Sensing Vehicular Network: A Data Analytic and Stochastic Geometry Approach

The increasing complexity of urban environments introduces additional uncertainty to the deployment of the autonomous vehicular network. A novel road infrastructure cooperative detection model using Joint Communication and Sensing (JCS) technology is proposed in this article to simultaneously achieve high-efficient communication and obstacle detection for urban autonomous vehicles. To suppress the performance fluctuation caused by shadowing and obstruction to the JCS signals, we first derive the statistic of road obstacles from the Geographic Information System (GIS). Then, the analysis of JCS channel characteristics and shadowing factors are presented using Line-of-Sight and Non-Line-of-Sight (LoS and NLoS) channel models under the complex urban scenario. A stochastic geometry approach is applied to analyze the interference factors and the probability distribution of successful JCS detection and communication. Simulations have been made to verify the cooperative detection model by probability analysis based on LoS and NLoS channels, and the numerical results demonstrate several different optimization methods for the deployment of JCS road infrastructures. Finally, we simulated and analyzed a deployment optimization method for JCS road infrastructures that complied with the standard of urban traffic-spot structure placement.

eess.SP↗

Geo-Spatio-Temporal Information Based 3D Cooperative Positioning in LOS/NLOS Mixed Environments

We propose a geographic and spatio-temporal information based distributed cooperative positioning (GSTICP) algorithm for wireless networks that require three-dimensional (3D) coordinates and operate in the line-of-sight (LOS) and nonline-of-sight (NLOS) mixed environments. First, a factor graph (FG) is created by factorizing the a posteriori distribution of the position-vector estimates and mapping the spatial-domain and temporal-domain operations of nodes onto the FG. Then, we exploit a geographic information based NLOS identification scheme to reduce the performance degradation caused by NLOS measurements. Furthermore, we utilize a finite symmetric sampling based scaled unscented transform (SUT) method to approximate the nonlinear terms of the messages passing on the FG with high precision, despite using only a small number of samples. Finally, we propose an enhanced anchor upgrading (EAU) mechanism to avoid redundant iterations. Our GSTICP algorithm supports any type of ranging measurement that can determine the distance between nodes. Simulation results and analysis demonstrate that our GSTICP has a lower computational complexity than the state-of-the-art belief propagation (BP) based localizers, while achieving an even more competitive positioning performance.

eess.SP↗

Distributed Spatio-Temporal Information Based Cooperative 3D Positioning in GNSS-Denied Environments

A distributed spatio-temporal information based cooperative positioning (STICP) algorithm is proposed for wireless networks that require three-dimensional (3D) coordinates and operate in the global navigation satellite system (GNSS) denied environments. Our algorithm supports any type of ranging measurements that can determine the distance between nodes. We first utilize a finite symmetric sampling based scaled unscented transform (SUT) method for approximating the nonlinear terms of the messages passing on the associated factor graph (FG) with high precision, despite relying on a small number of samples. Then, we propose an enhanced anchor upgrading mechanism to avoid any redundant iterations. Our simulation results and analysis show that the proposed STICP has a lower computational complexity than the state-of-the-art belief propagation based localizer, despite achieving an even more competitive positioning performance.

eess.SP↗

Improve Radar Sensing Performance of Multiple Roadside Units Cooperation via Space Registration

Roadside units (RSUs) can help vehicles sense the traffic environment, so as to improve traffic safety. Since the sensing capability of single RSU is limited, we propose a multiple RSUs cooperative radar sensing network (RSU-CRSN) with signal-level fusion technique. Spatial registration is an essential prerequisite and foundation for RSU-CRSN with signal-level fusion. In this paper, we present an adjustable beam enabled spatial registration algorithm (AB-SRA) that makes the sensing area of each RSU coincide by adjusting the sensing beam width of RSU. To adjust the width of sensing beam flexibly, a beamwidth adjustable beamforming algorithm (BABA) is proposed in this paper. Simulation results show that the performance of AB-SRA is close to perfect spatial registration.

cs.NI↗

Improve Sensing and Communication Performance of UAV via Integrated Sensing and Communication

The unmanned aerial vehicle (UAV) needs to sense the environment to ensure safe flight, and the sensing accuracy and communication delay performance are two important indicators of safe flight. The strategy of using integrated sensing and communication (ISAC) technology to improve the sensing and communication performance is proposed in this paper. On the one hand, the extended kalman filter (EKF) algorithm is adopted to achieve the fusion of communication location information and sensing information to improve the accuracy of target sensing. On the other hand, a Identification Friend or Foe (IFF) method based on ISAC is proposed to reduce communication delay. Compared with the traditional IFF method, the integrated technology used for IFF can realize the radar sensing and communication interrogating functions in parallel, greatly shortening the sensing time. Simulation results show that using ISAC technology, the sensing performance of UAV has been greatly improved, the communication delay can be reduced by up to 50%, the accuracy of target sensing can be improved by 24.2% when communication location information and radar sensing information have the same sensing accuracy.

cs.NI↗

Toward Multiple Integrated Sensing and Communication Base Station Systems: Collaborative Precoding Design with Power Constraint

The collaborative sensing of multiple Integrated sensing and communication (ISAC) base stations is one of the important technologies to achieve intelligent transportation. Interference elimination between ISAC base stations is the prerequisite for realizing collaborative sensing. In this paper, we focus on the mutual interference elimination problem in collaborative sensing of multiple ISAC base stations that can communicate and radar sense simultaneously by transmitting ISAC signals. We establish a mutual interference model of multiple ISAC base stations, which consists of communication and radar sensing related interference. Moreover, we propose a joint optimization algorithm (JOA) to solve the collaborative precoding problem with total power constraint (TPC) and perantenna power constraint (PPC). The optimal precoding design can be obtained by using JOA to set appropriate tradeoff coefficient between sensing and communication performance. The proposed collaborative precoding design algorithm is evaluated by considering sensing and communication performance via numerical results. The complexity of JOA for collaborative precoding under TPC and PPC is also compared and simulated in this paper.

cs.IT↗

Vehicular Connectivity on Complex Trajectories: Roadway-Geometry Aware ISAC Beam-tracking

In this paper, we propose sensing-assisted beamforming designs for vehicles on arbitrarily shaped roads by relying on integrated sensing and communication (ISAC) signalling.Specifically, we aim to address the limitations of conventional ISAC beam-tracking schemes that do not apply to complex road geometries. To improve the tracking accuracy and communication quality of service (QoS) in vehicle to infrastructure (V2I) networks, it is essential to model the complicated roadway geometry. To that end, we impose the curvilinear coordinate system (CCS) in an interacting multiple model extended Kalman filter (IMM-EKF) framework. By doing so, both the position and the motion of the vehicle on a complicated road can be explicitly modeled and precisely tracked attributing to the benefits from the CCS. Furthermore, an optimization problem is formulated to maximize the array gain through dynamically adjusting the array size and thereby controlling the beamwidth, which takes the performance loss caused by beam misalignment into account.Numerical simulations demonstrate that the roadway geometry-aware ISAC beamforming approach outperforms the communication-only based and ISAC kinematic-only based technique in the tracking performance. Moreover, the effectiveness of the dynamic beamwidth design is also verified by our numerical results.

eess.SP↗

Beam Training and Tracking in MmWave Communication: A Survey

Communicating on millimeter wave (mmWave) bands is ushering in a new epoch of mobile communication which provides the availability of 10 Gbps high data rate transmission. However, mmWave links are easily prone to short transmission range communication because of the serious free space path loss and the blockage by obstacles. To overcome these challenges, highly directional beams are exploited to achieve robust links by hybrid beamforming. Accurately aligning the transmitter and receiver beams, i.e. beam training, is vitally important to high data rate transmission. However, it may cause huge overhead which has negative effects on initial access, handover, and tracking. Besides, the mobility patterns of users are complicated and dynamic, which may cause tracking error and large tracking latency. An efficient beam tracking method has a positive effect on sustaining robust links. This article provides an overview of the beam training and tracking technologies on mmWave bands and reveals the insights for future research in the 6th Generation (6G) mobile network. Especially, some open research problems are proposed to realize fast, accurate, and robust beam training and tracking. We hope that this survey provides guidelines for the researchers in the area of mmWave communications.

eess.SP↗

Mobility Support for Millimeter Wave Communications: Opportunities and Challenges

Millimeter-wave (mmWave) communication technology offers a potential and promising solution to support 5G and B5G wireless networks in dynamic scenarios and applications. However, mobility introduces many challenges as well as opportunities to mmWave applications. To address these problems, we conduct a survey of the opportunities and technologies to support mmWave communications in mobile scenarios. Firstly, we summarize the mobile scenarios where mmWave communications are exploited, including indoor wireless local area network (WLAN) or wireless personal area network (WPAN), cellular access, vehicle-to-everything (V2X), high speed train (HST), unmanned aerial vehicle (UAV), and the new space-air-ground-sea communication scenarios. Then, to address users' mobility impact on the system performance in different application scenarios, we introduce several representative mobility models in mmWave systems, including human mobility, vehicular mobility, high speed train mobility and ship mobility. Next we survey the key challenges and existing solutions to mmWave applications, such as channel modeling, channel estimation, anti-blockage, and capacity improvement. Lastly, we discuss the open issues concerning mobility-aware mmWave communications that deserve further investigation. In particular, we highlight future heterogeneous mobile networks, dynamic resource management, artificial intelligence (AI) for mobility and integration of geographical information, deployment of large intelligent surface and reconfigurable antenna technology, and finally, the evolution to Terahertz (THz) communications.

cs.IT↗

Function-words Enhanced Attention Networks for Few-Shot Inverse Relation Classification

The relation classification is to identify semantic relations between two entities in a given text. While existing models perform well for classifying inverse relations with large datasets, their performance is significantly reduced for few-shot learning. In this paper, we propose a function words adaptively enhanced attention framework (FAEA) for few-shot inverse relation classification, in which a hybrid attention model is designed to attend class-related function words based on meta-learning. As the involvement of function words brings in significant intra-class redundancy, an adaptive message passing mechanism is introduced to capture and transfer inter-class differences.We mathematically analyze the negative impact of function words from dot-product measurement, which explains why message passing mechanism effectively reduces the impact. Our experimental results show that FAEA outperforms strong baselines, especially the inverse relation accuracy is improved by 14.33% under 1-shot setting in FewRel1.0.

cs.CL↗

MmWave Radar and Vision Fusion for Object Detection in Autonomous Driving: A Review

With autonomous driving developing in a booming stage, accurate object detection in complex scenarios attract wide attention to ensure the safety of autonomous driving. Millimeter wave (mmWave) radar and vision fusion is a mainstream solution for accurate obstacle detection. This article presents a detailed survey on mmWave radar and vision fusion based obstacle detection methods. First, we introduce the tasks, evaluation criteria, and datasets of object detection for autonomous driving. The process of mmWave radar and vision fusion is then divided into three parts: sensor deployment, sensor calibration, and sensor fusion, which are reviewed comprehensively. Specifically, we classify the fusion methods into data level, decision level, and feature level fusion methods. In addition, we introduce three-dimensional(3D) object detection, the fusion of lidar and vision in autonomous driving and multimodal information fusion, which are promising for the future. Finally, we summarize this article.

cs.CV↗

Anti-collision Technologies for Unmanned Aerial Vehicles: Recent Advances and Future Trends

Unmanned aerial vehicles (UAVs) are widely applied in civil applications, such as disaster relief, agriculture and cargo transportation, etc. With the massive number of UAV flight activities, the anti-collision technologies aiming to avoid the collisions between UAVs and other objects have attracted much attention. The anti-collision technologies are of vital importance to guarantee the survivability and safety of UAVs. In this article, a comprehensive survey on UAV anti-collision technologies is presented. We firstly introduce laws and regulations on UAV safety which prevent collision at the policy level. Then, the process of anti-collision technologies are reviewed from three aspects, i.e., obstacle sensing, collision prediction, and collision avoidance. We provide detailed survey and comparison of the methods of each aspect and analyze their pros and cons. Besides, the future trends on UAV anti-collision technologies are presented from the perspective of fast obstacle sensing and fast wireless networking. Finally, we summarize this article.

cs.RO↗

Block Modeling-Guided Graph Convolutional Neural Networks

Graph Convolutional Network (GCN) has shown remarkable potential of exploring graph representation. However, the GCN aggregating mechanism fails to generalize to networks with heterophily where most nodes have neighbors from different classes, which commonly exists in real-world networks. In order to make the propagation and aggregation mechanism of GCN suitable for both homophily and heterophily (or even their mixture), we introduce block modeling into the framework of GCN so that it can realize "block-guided classified aggregation", and automatically learn the corresponding aggregation rules for neighbors of different classes. By incorporating block modeling into the aggregation process, GCN is able to aggregate information from homophilic and heterophilic neighbors discriminately according to their homophily degree. We compared our algorithm with state-of-art methods which deal with the heterophily problem. Empirical results demonstrate the superiority of our new approach over existing methods in heterophilic datasets while maintaining a competitive performance in homophilic datasets.

cs.LG↗

Neighbor Discovery for VANET with Gossip Mechanism and Multi-packet Reception

Neighbor discovery (ND) is a key initial step of network configuration and prerequisite of vehicular ad hoc network (VANET). However, the convergence efficiency of ND is facing the requirements of multi-vehicle fast networking of VANET with frequent topology changes. This paper proposes gossip-based information dissemination and sensing information assisted ND with MPR (GSIM-ND) algorithm for VANET. GSIM-ND algorithm leverages efficient gossip-based information dissemination in the case of multi-packet reception (MPR). Besides, through multi-target detection function of multiple sensors installed in roadside unit (RSU), RSU can sense the distribution of vehicles and help vehicles to obtain the distribution of their neighbors. Thus, GSIM-ND algorithm leverages the dissemination of sensing information as well. The expected number of discovered neighbors within a given period is theoretically derived and used as the critical metric to evaluate the performance of GSIM-ND algorithm. The expected bounds of the number of time slots when a given number of neighbors needs to be discovered is derived as well. The simulation results verify the correctness of theoretical derivation. It is discovered that GSIM-ND algorithm proposed in this paper can always reach the short-term convergence quickly. Moreover, GSIM-ND algorithm is more efficient and stable compared with completely random algorithm (CRA), scan-based algorithm (SBA) and gossip-based algorithm. The convergence time of GSIM-ND algorithm is 40\%-90\% lower than that of these existing algorithms for both low density and high density networks. Thus, GSIM-ND can improve the efficiency of ND algorithm.

cs.NI↗

Symbiotic Sensing and Communications Towards 6G: Vision, Applications, and Technology Trends

Driven by the vision of intelligent connection of everything and digital twin towards 6G, a myriad of new applications, such as immersive extended reality, autonomous driving, holographic communications, intelligent industrial internet, will emerge in the near future, holding the promise to revolutionize the way we live and work. These trends inspire a novel technical design principle that seamlessly integrates two originally decoupled functionalities, i.e., wireless communication and sensing, into one system in a symbiotic way, which is dubbed symbiotic sensing and communications (SSaC), to endow the wireless network with the capability to "see" and "talk" to the physical world simultaneously. Noting that the term SSaC is used instead of ISAC (integrated sensing and communications) because the word ``symbiotic/symbiosis" is more inclusive and can better accommodate different integration levels and evolution stages of sensing and communications. Aligned with this understanding, this article makes the first attempts to clarify the concept of SSaC, illustrate its vision, envision the three-stage evolution roadmap, namely neutralism, commensalism, and mutualism of SaC. Then, three categories of applications of SSaC are introduced, followed by detailed description of typical use cases in each category. Finally, we summarize the major performance metrics and key enabling technologies for SSaC.

cs.IT↗

Joint Radar and Communication: A Survey

Joint radar and communication (JRC) technology has become important for civil and military applications for decades. This paper introduces the concepts, characteristics and advantages of JRC technology, presenting the typical applications that have benefited from JRC technology currently and in the future. This paper explores the state-of-the-art of JRC in the levels of coexistence, cooperation, co-design and collaboration. Compared to previous surveys, this paper reviews the entire trends that drive the development of radar sensing and wireless communication using JRC. Specifically, we explore an open research issue on radar and communication operating with mutual benefits based on collaboration, which represents the fourth stage of JRC evolution. This paper provides useful perspectives for future researches of JRC technology.

cs.IT↗

DoA-LF: A Location Fingerprint Positioning Algorithm with Millimeter-Wave

Location fingerprint (LF) has been widely applied in indoor positioning. However, the existing studies on LF mostly focus on the fingerprint of WiFi below 6 GHz, bluetooth, ultra wideband (UWB), etc. The LF with millimeter-wave (mmWave) was rarely addressed. Since mmWave has the characteristics of narrow beam, fast signal attenuation and wide bandwidth, etc., the positioning error can be reduced. In this paper, an LF positioning method with mmWave is proposed, which is named as DoA-LF. Besides received signal strength indicator (RSSI) of access points (APs), the fingerprint database contains direction of arrival (DoA) information of APs, which is obtained via DoA estimation. Then the impact of the number of APs, the interval of reference points (RPs), the channel model of mmWave and the error of DoA estimation algorithm on positioning error is analyzed with Cramer-Rao lower bound (CRLB). Finally, the proposed DoA-LF algorithm with mmWave is verified through simulations. The simulation results have proved that mmWave can reduce the positioning error due to the fact that mmWave has larger path loss exponent and smaller variance of shadow fading compared with low frequency signals. Besides, accurate DoA estimation can reduce the positioning error.

cs.IT↗