arXiv subjects

Zhou Wang

Publications and source records attributed to Zhou Wang.

At least 55 records · Page 3Linked to original sources

arXiv2025

Position reconstruction and surface background model for the PandaX-4T detector

We report the position reconstruction methods and surface background model for the PandaX-4T dark matter direct search experiment. This work develops two position reconstruction algorithms: template matching (TM) method and photon acceptance function (PAF) method. Both methods determine the horizontal position of events based on the light pattern of secondary scintillation collected by the light sensors. After a comprehensive evaluation of resolution, uniformity, and robustness, the PAF method was selected for position reconstruction, while the TM method was employed for verification. The PAF method achieves a bulk event resolution of 1.0 mm and a surface event resolution of 4.4 mm for a typical $S2$ signal with a bottom charge of 1500 PE (about 14 keV). The uniformity is around 20\%. Robustness studies reveal average deviations of 5.1 mm and 8.8 mm for the commissioning run (Run0) and the first science run (Run1), respectively, due to the deactivation of certain PMTs. A data-driven surface background model is developed based on the PAF method. The surface background is estimated to be $0.09 \pm 0.06$ events for Run0 (0.54 tonne$\cdot$year) and $0.17 \pm 0.11$ events for Run1 (1.00 tonne$\cdot$year).

physics.ins-det↗

arXiv2025

Dark Matter Search Results from 1.54 Tonne$\cdot$Year Exposure of PandaX-4T

In this letter, we report the dark matter search results from the commissioning run and the first science run of the PandaX-4T experiment. A blind analysis is carried out on the entire data set. The data processing is improved compared to previous work, unifying the low-level signal reconstruction in a wide energy range up to 120 keV. With a total exposure of 1.54 tonne$\cdot$year, no significant excess of nuclear recoil events is found. The lowest 90% confidence level exclusion on the spin-independent cross section is $1.6 \times 10^{-47}\,\mathrm{cm}^2$ at a dark matter mass of 40 GeV$/c^2$. Our results represent the most stringent constraint for a dark matter mass above 100 GeV$/c^2$.

hep-ex↗

arXiv2025

Exploring New Physics with PandaX-4T Low Energy Electronic Recoil Data

New particles beyond the standard model of particle physics, such as axions, can be effectively searched through their interactions with electrons. We use the large liquid xenon detector PandaX-4T to search for novel electronic recoil signals induced by solar axions, neutrinos with anomalous magnetic moment, axionlike particles, dark photons, and light fermionic dark matter. A detailed background model is established using the latest datasets with 1.54 $\rm ton \cdot yr$ exposure. No significant excess above the background has been observed, and we have obtained competitive constraints for axion couplings, neutrino magnetic moment, and fermionic dark matter interactions.

hep-ex↗

arXiv2025

Learning in Log-Domain: Subthreshold Analog AI Accelerator Based on Stochastic Gradient Descent

The rapid proliferation of AI models, coupled with growing demand for edge deployment, necessitates the development of AI hardware that is both high-performance and energy-efficient. In this paper, we propose a novel analog accelerator architecture designed for AI/ML training workloads using stochastic gradient descent with L2 regularization (SGDr). The architecture leverages log-domain circuits in subthreshold MOS and incorporates volatile memory. We establish a mathematical framework for solving SGDr in the continuous time domain and detail the mapping of SGDr learning equations to log-domain circuits. By operating in the analog domain and utilizing weak inversion, the proposed design achieves significant reductions in transistor area and power consumption compared to digital implementations. Experimental results demonstrate that the architecture closely approximates ideal behavior, with a mean square error below 0.87% and precision as low as 8 bits. Furthermore, the architecture supports a wide range of hyperparameters. This work paves the way for energy-efficient analog AI hardware with on-chip training capabilities.

cs.AR↗

arXiv2025

Magnetic properties and enhanced magnetocaloric effect in EuAl$_3$Si single crystals

This study presents systematic investigations into the growth and physical properties of EuAl$_3$Si single crystals, encompassing magnetic, transport, and thermodynamic analyses. EuAl$_3$Si undergoes a ferromagnetic transition at $T_C$ = 15 K. A significant reversible magnetocaloric effect was observed around $T_C$. Strikingly, with a small change of magnetic field 2 T, the maximum values of magnetic entropy change (13.4 J/kg K), refrigerant capacity (166 J/kg) and adiabatic temperature change (7.2 K) are found. These parameters respectively are 60%, 148% and 64% larger than those of the parent compound EuAl$_4$, and suggest EuAl$_3$Si as an excellent candidate for magnetic refrigeration applications near the temperature of liquid hydrogen. The possible mechanism for this enhancement is also discussed.

cond-mat.str-el↗

arXiv2024

Structural Similarity in Deep Features: Image Quality Assessment Robust to Geometrically Disparate Reference

Image Quality Assessment (IQA) with references plays an important role in optimizing and evaluating computer vision tasks. Traditional methods assume that all pixels of the reference and test images are fully aligned. Such Aligned-Reference IQA (AR-IQA) approaches fail to address many real-world problems with various geometric deformations between the two images. Although significant effort has been made to attack Geometrically-Disparate-Reference IQA (GDR-IQA) problem, it has been addressed in a task-dependent fashion, for example, by dedicated designs for image super-resolution and retargeting, or by assuming the geometric distortions to be small that can be countered by translation-robust filters or by explicit image registrations. Here we rethink this problem and propose a unified, non-training-based Deep Structural Similarity (DeepSSIM) approach to address the above problems in a single framework, which assesses structural similarity of deep features in a simple but efficient way and uses an attention calibration strategy to alleviate attention deviation. The proposed method, without application-specific design, achieves state-of-the-art performance on AR-IQA datasets and meanwhile shows strong robustness to various GDR-IQA test cases. Interestingly, our test also shows the effectiveness of DeepSSIM as an optimization tool for training image super-resolution, enhancement and restoration, implying an even wider generalizability. \footnote{Source code will be made public after the review is completed.

cs.CV↗

arXiv2024

Searching for Neutrinoless Double-Beta Decay of $^{136}$Xe with PandaX-4T

We report the search for neutrinoless double-beta decay of $^{136}$Xe from the PandaX-4T experiment with a 3.7-tonne natural xenon target. The data reconstruction and the background modeling are optimized in the MeV energy region. A blind analysis is performed with data from the commissioning run and the first science run. No significant excess of signal over the background is observed. A lower limit on the half-life of $^{136}$Xe neutrinoless double-beta decay is established to be $2.1 \times 10^{24}$~yr at the 90\% confidence level, with a $^{136}$Xe exposure of 44.6~kg$\cdot$year. Our result represents the most stringent constraint from a natural xenon detector to date.

nucl-ex↗

arXiv2024

PandaX-xT: a Multi-ten-tonne Liquid Xenon Observatory at the China Jinping Underground Laboratory

We propose a major upgrade to the existing PandaX-4T experiment in the China Jinping Underground Laboratory. The new experiment, PandaX-xT, will be a multi-ten-tonne liquid xenon, ultra-low background, and general-purpose observatory. The full-scaled PandaX-xT contains a 43-tonne liquid xenon active target. Such an experiment will significantly advance our fundamental understanding of particle physics and astrophysics. The sensitivity of dark matter direct detection will be improved by nearly two orders of magnitude compared to the current best limits, approaching the so-called "neutrino floor" for a dark matter mass above 10 GeV/$c^2$, providing a decisive test to the Weakly Interacting Massive Particle paradigm. By searching for the neutrinoless double beta decay of $^{136}$Xe isotope in the detector, the effective Majorana neutrino mass can be measured to a [10 -- 41] meV/$c^2$ sensitivity, providing a key test to the Dirac/Majorana nature of neutrino s. Astrophysical neutrinos and other ultra-rare interactions can also be measured and searched for with an unprecedented background level, opening up new windows of discovery. Depending on the findings, PandaX-xT will seek the next stage upgrade utilizing isotopic separation on natural xenon.

hep-ex↗

arXiv2024

Perceptual Quality Assessment of Trisoup-Lifting Encoded 3D Point Clouds

No-reference bitstream-layer point cloud quality assessment (PCQA) can be deployed without full decoding at any network node to achieve real-time quality monitoring. In this work, we develop the first PCQA model dedicated to Trisoup-Lifting encoded 3D point clouds by analyzing bitstreams without full decoding. Specifically, we investigate the relationship among texture bitrate per point (TBPP), texture complexity (TC) and texture quantization parameter (TQP) while geometry encoding is lossless. Subsequently, we estimate TC by utilizing TQP and TBPP. Then, we establish a texture distortion evaluation model based on TC, TBPP and TQP. Ultimately, by integrating this texture distortion model with a geometry attenuation factor, a function of trisoupNodeSizeLog2 (tNSL), we acquire a comprehensive NR bitstream-layer PCQA model named streamPCQ-TL. In addition, this work establishes a database named WPC6.0, the first and largest PCQA database dedicated to Trisoup-Lifting encoding mode, encompassing 400 distorted point clouds with both 4 geometric multiplied by 5 texture distortion levels. Experiment results on M-PCCD, ICIP2020 and the proposed WPC6.0 database suggest that the proposed streamPCQ-TL model exhibits robust and notable performance in contrast to existing advanced PCQA metrics, particularly in terms of computational cost. The dataset and source code will be publicly released at https://github.com/qdushl/Waterloo-Point-Cloud-Database-6.0

cs.CV↗

arXiv2024

Perceptual Quality Assessment of Octree-RAHT Encoded 3D Point Clouds

No-reference bitstream-layer point cloud quality assessment (PCQA) can be deployed without full decoding at any network node to achieve real-time quality monitoring. In this work, we focus on the PCQA problem dedicated to Octree-RAHT encoding mode. First, to address the issue that existing PCQA databases have a small scale and limited distortion levels, we establish the WPC5.0 database which is the first one dedicated to Octree-RAHT encoding mode with a scale of 400 distorted point clouds (PCs) including 4 geometric multiplied by 5 attitude distortion levels. Then, we propose the first PCQA model dedicated to Octree-RAHT encoding mode by parsing PC bitstreams without full decoding. The model introduces texture bitrate (TBPP) to predict texture complexity (TC) and further derives the texture distortion factor. In addition, the Geometric Quantization Parameter (PQS) is used to estimate the geometric distortion factor, which is then integrated into the model along with the texture distortion factor to obtain the proposed PCQA model named streamPCQ-OR. The proposed model has been compared with other advanced PCQA methods on the WPC5.0, BASICS and M-PCCD databases, and experimental results show that our model has excellent performance while having very low computational complexity, providing a reliable choice for time-critical applications. To facilitate subsequent research, the database and source code will be publicly released at https://github.com/qdushl/Waterloo-Point-Cloud-Database-5.0.

cs.MM↗

arXiv2024

First Indication of Solar $^8$B Neutrino Flux through Coherent Elastic Neutrino-Nucleus Scattering in PandaX-4T

The PandaX-4T liquid xenon detector at the China Jinping Underground Laboratory is used to measure the solar $^8$B neutrino flux by detecting neutrinos through coherent scattering with xenon nuclei. Data samples requiring the coincidence of scintillation and ionization signals (paired), as well as unpaired ionization-only signals (US2), are selected with energy threshold of approximately 1.1 keV (0.33 keV) nuclear recoil energy. Combining the commissioning run and the first science run of PandaX-4T, a total exposure of 1.20 and 1.04 tonne$\cdot$year are collected for the paired and US2, respectively. After unblinding, 3 and 332 events are observed with an expectation of 2.8$\pm$0.5 and 251$\pm$32 background events, for the paired and US2 data, respectively. A combined analysis yields a best-fit $^8$B neutrino signal of 3.5 (75) events from the paired (US2) data sample, with $\sim$37\% uncertainty, and the background-only hypothesis is disfavored at 2.64$σ$ significance. This gives a solar $^8$B neutrino flux of ($8.4\pm3.1$)$\times$10$^6$ cm$^{-2}$s$^{-1}$, consistent with the standard solar model prediction. It is also the first indication of solar $^8$B neutrino ``fog'' in a dark matter direct detection experiment.

hep-ex↗

arXiv2024

Search for Cosmic-ray Boosted Sub-MeV Dark-Matter-Electron Scattering in PandaX-4T

We report the first search for the elastic scatterings between cosmic-ray boosted sub-MeV dark matter and electrons in the PandaX-4T liquid xenon experiment. Sub-MeV dark matter particles can be accelerated by scattering with electrons in the cosmic rays and produce detectable electron recoil signals in the detector. Using the commissioning data from PandaX-4T of 0.63~tonne$\cdot$year exposure, we set new constraints on DM-electron scattering cross sections for DM masses ranging from 10~eV/$c^2$ to 3~keV/$c^2$.

hep-ex↗

arXiv2024

Constraints on the axial-vector and pseudo-scalar mediated WIMP-nucleus interactions from PandaX-4T experiment

We present the constraints on the axial-vector and pseudo-scalar mediated WIMP-nucleus interactions from the PandaX-4T experiment, using the data set corresponding to a total exposure of 0.63~tonne$\cdot$year. No significant signal excess is observed, and the most stringent upper limits to date on the spin-dependent WIMP-neutron scattering cross section are set at 90\% confidence level with the minimum WIMP-neutron scattering cross section of 5.8$\times 10^{-42}$\si{\cm^{2}} for WIMP mass of 40~\si{\GeV/}$c^2$. Exclusion limits on the axial-vector and pseudo-scalar simplified models are also derived.

hep-ex↗

arXiv2024

Perceptual Depth Quality Assessment of Stereoscopic Omnidirectional Images

Depth perception plays an essential role in the viewer experience for immersive virtual reality (VR) visual environments. However, previous research investigations in the depth quality of 3D/stereoscopic images are rather limited, and in particular, are largely lacking for 3D viewing of 360-degree omnidirectional content. In this work, we make one of the first attempts to develop an objective quality assessment model named depth quality index (DQI) for efficient no-reference (NR) depth quality assessment of stereoscopic omnidirectional images. Motivated by the perceptual characteristics of the human visual system (HVS), the proposed DQI is built upon multi-color-channel, adaptive viewport selection, and interocular discrepancy features. Experimental results demonstrate that the proposed method outperforms state-of-the-art image quality assessment (IQA) and depth quality assessment (DQA) approaches in predicting the perceptual depth quality when tested using both single-viewport and omnidirectional stereoscopic image databases. Furthermore, we demonstrate that combining the proposed depth quality model with existing IQA methods significantly boosts the performance in predicting the overall quality of 3D omnidirectional images.

cs.CV↗

arXiv2024

Measurement of Solar $pp$ Neutrino Flux using Electron Recoil Data from PandaX-4T Commissioning Run

The proton-proton ($pp$) fusion chain dominates the neutrino production from the Sun. The uncertainty of the predicted $pp$ neutrino flux is at the sub-percent level, whereas that of the best measurement is $\mathcal{O}(10\%)$. In this paper, we present the first result to measure the solar $pp$ neutrinos in the electron recoil energy range from 24 to 144 keV, using the PandaX-4T commissioning data with 0.63 tonne$\times$year exposure. The $pp$ neutrino flux is determined to be $(8.0 \pm 3.9 \,{\rm{(stat)}} \pm 10.0 \,{\rm{(syst)}} )\times 10^{10}\, $$\rm{s}^{-1} \rm{cm}^{-2}$, consistent with Standard Solar Model and existing measurements, corresponding to a flux upper limit of $23.3\times 10^{10}\, $$\rm{s}^{-1} \rm{cm}^{-2}$ at 90\% C.L..

hep-ex↗

arXiv2024

Signal Response Model in PandaX-4T

PandaX-4T experiment is a deep-underground dark matter direct search experiment that employs a dual-phase time projection chamber with a sensitive volume containing 3.7 tonne of liquid xenon. The detector of PandaX-4T is capable of simultaneously collecting the primary scintillation and ionization signals, utilizing their ratio to discriminate dark matter signals from background sources such as gamma rays and beta particles. The signal response model plays a crucial role in interpreting the data obtained by PandaX-4T. It describes the conversion from the deposited energy by dark matter interactions to the detectable signals within the detector. The signal response model is utilized in various PandaX-4T results. This work provides a comprehensive description of the procedures involved in constructing and parameter-fitting the signal response model for the energy range of approximately 1 keV to 25 keV for electronic recoils and 6 keV to 90 keV for nuclear recoils. It also covers the signal reconstruction, selection, and correction methods, which are crucial components integrated into the signal response model.

physics.ins-det↗

arXiv2024

Waveform Simulation in PandaX-4T

Signal reconstruction through software processing is a crucial component of the background and signal models in the PandaX-4T experiment, which is a multi-tonne dark matter direct search experiment. The accuracy of signal reconstruction is influenced by various detector artifacts, including noise, dark count of photomultiplier, impurity photoionization in the detector, and other relevant considerations. In this study, we present a detailed description of a semi-data-driven approach designed to simulate the signal waveform. This work provides a reliable model for the efficiency and bias of the signal reconstruction in the data analysis of PandaX-4T. By comparing critical variables which relate to the temporal shape and hit pattern of the signals, we demonstrate a good agreement between the simulation and data.

hep-ex↗

arXiv2024

Perceptual Crack Detection for Rendered 3D Textured Meshes

Recent years have witnessed many advancements in the applications of 3D textured meshes. As the demand continues to rise, evaluating the perceptual quality of this new type of media content becomes crucial for quality assurance and optimization purposes. Different from traditional image quality assessment, crack is an annoying artifact specific to rendered 3D meshes that severely affects their perceptual quality. In this work, we make one of the first attempts to propose a novel Perceptual Crack Detection (PCD) method for detecting and localizing crack artifacts in rendered meshes. Specifically, motivated by the characteristics of the human visual system (HVS), we adopt contrast and Laplacian measurement modules to characterize crack artifacts and differentiate them from other undesired artifacts. Extensive experiments on large-scale public datasets of 3D textured meshes demonstrate effectiveness and efficiency of the proposed PCD method in correct localization and detection of crack artifacts. %Specifically, We propose a full-reference crack artifact localization method that operates on a pair of input snapshots of distorted and reference 3D objects to generate a final crack map. Moreover, to quantify the performance of the proposed detection method and validate its effectiveness, we propose a simple yet effective weighting mechanism to incorporate the resulting crack map into classical quality assessment (QA) models, which creates significant performance improvement in predicting the perceptual image quality when tested on public datasets of static 3D textured meshes. A software release of the proposed method is publicly available at: https://github.com/arshafiee/crack-detection-VVM

cs.CV↗