arXiv subjects

Zihuai Lin

Publications and source records attributed to Zihuai Lin.

At least 19 recordsLinked to original sources

arXiv2026

BCH Coding Assisted Imaging

In modern correlation imaging systems, also known as ghost imaging (GI), particularly under low-light or noisy conditions, preserving high image fidelity presents a significant challenge. This paper introduces an innovative approach by integrating Bose-Chaudhuri-Hocquenghem (BCH) error control coding (ECC) into CGI systems to assist imaging. By encoding target image with BCH codes and using order-statistic decoding (OSD) for error correction during reconstruction, this approach significantly improves image quality across various signal-to-noise ratio (SNR) conditions. Simulation and experiment results validate that BCH coding assisted imaging achieves significantly enhanced robustness against additive white Gaussian noise (AWGN) and improved image reconstruction quality. In addition, the imaging performance of different BCH codes varies, with each code exhibiting distinct advantages based on factors such as code length and coding efficiency.

physics.optics↗

arXiv2025

Enhanced Ground-Satellite Direct Access via Onboard Rydberg Atomic Quantum Receivers

Ground-satellite links for 6G networks face critical challenges, including severe path loss, tight size-weight-power limits, and congested spectrum, all of which significantly hinder the performance of traditional radio frequency (RF) front ends. This article introduces the Rydberg Atomic Quantum Receiver (RAQR) for onboard satellite systems, a millimeter-scale front end that converts radio fields to optical signals through atomic electromagnetically induced transparency. RAQR's high sensitivity and high frequency selectivity address link budget, payload, and interference challenges while fitting within space constraints. A hybrid atomic-electronic design and supporting signal model demonstrate enhanced data rate, coverage, and sensing accuracy relative to conventional RF receivers. The article concludes with integration strategies, distributed-satellite concepts, and open research problems for bringing RAQR-enabled satellite payloads into service.

eess.SY↗

arXiv2025

Latency-Aware Resource Allocation for Integrated Communications, Computation, and Sensing in Cell-Free mMIMO Systems

In this paper, we investigate a cell-free massive multiple-input and multiple-output (MIMO)-enabled integration communication, computation, and sensing (ICCS) system, aiming to minimize the maximum computation latency to guarantee the stringent sensing requirements. We consider a two-tier offloading framework, where each multi-antenna terminal can optionally offload its local tasks to either multiple mobile-edge servers for distributed computation or the cloud server for centralized computation while satisfying the sensing requirements and power constraint. The above offloading problem is formulated as a mixed-integer programming and non-convex problem, which can be decomposed into three sub-problems, namely, distributed offloading decision, beamforming design, and execution scheduling mechanism. First, the continuous relaxation and penalty-based techniques are applied to tackle the distributed offloading strategy. Then, the weighted minimum mean square error (WMMSE) and successive convex approximation (SCA)-based lower bound are utilized to design the integrated communication and sensing (ISAC) beamforming. Finally, the other resources can be judiciously scheduled to minimize the maximum latency. A rigorous convergence analysis and numerical results substantiate the effectiveness of our method. Furthermore, simulation results demonstrate that multi-point cooperation in cell-free massive MIMO-enabled ICCS significantly reduces overall computation latency, in comparison to the benchmark schemes.

eess.SP↗

arXiv2024

Computational Ghost Imaging with Low-Density Parity-Check Code

Ghost imaging (GI) is a high-resolution imaging technology that has been a subject of interest to many fields in the past 20 years. Most GI researchers focus on the reconstruction of signal under-sampling, nevertheless, how to use information redundancy to improve the result's belief in a complex environment has hardly been studied. Motivated by this, we propose a computational GI system based on the low-density parity-check (LDPC) coded radiation field by exploiting the signal redundancy. The non-ideal factors generated within the imaging process can be eliminated by setting up the matching fading channel model. We have derived the analytical lower bound on the bit error rate for the proposed LDPC-coded GI system. The effectiveness and performance of the LDPC-coded GI system are further validated through numerical and experiment results.

eess.SP↗

arXiv2023

Index Modulation for Fluid Antenna-Assisted MIMO Communications: System Design and Performance Analysis

In this paper, we propose a transmission mechanism for fluid antennas (FAs) enabled multiple-input multiple-output (MIMO) communication systems based on index modulation (IM), named FA-IM, which incorporates the principle of IM into FAs-assisted MIMO system to improve the spectral efficiency (SE) without increasing the hardware complexity. In FA-IM, the information bits are mapped not only to the modulation symbols, but also the index of FA position patterns. Additionally, the FA position pattern codebook is carefully designed to further enhance the system performance by maximizing the effective channel gains. Then, a low-complexity detector, referred to efficient sparse Bayesian detector, is proposed by exploiting the inherent sparsity of the transmitted FA-IM signal vectors. Finally, a closed-form expression for the upper bound on the average bit error probability (ABEP) is derived under the finite-path and infinite-path channel condition. Simulation results show that the proposed scheme is capable of improving the SE performance compared to the existing FAs-assisted MIMO and the fixed position antennas (FPAs)-assisted MIMO systems while obviating any additional hardware costs. It has also been shown that the proposed scheme outperforms the conventional FA-assisted MIMO scheme in terms of error performance under the same transmission rate.

cs.IT↗

arXiv2023

Precise WiFi Indoor Positioning using Deep Learning Algorithms

This study demonstrates a WiFi indoor positioning system using Deep Learning algorithms. A new method using fitting function in MATLAB will be utilized to compute the path loss coefficient and log-normal fading variance. To reduce the error, a new hybrid localization approach utilizing Received Signal Strength Indicator (RSSI) and Angle of Arrival (AoA) has been created. Three Deep Learning algorithms would be utilized to decrease the adverse influence of the noise and interference. This paper compares the performance of two models in three different indoor environments. The average error of our hybrid positioning model trained by CNN in the big classroom is less than 250 mm.

eess.SP↗

arXiv2023

Probability of Error for Optimal Codes in a Reconfigurable Intelligent Surface Aided URLLC System

The lower bound on the decoding error probability for the optimal code given a signal-to-noise ratio and a code rate are investigated in this letter for the reconfigurable intelligent surface (RIS) communication system over a Rician fading channel at the short blocklength regime, which is the key characteristic of ultra-reliable low-latency communications (URLLC) to meet the need for strict adherence to quality of service (QoS) requirements. Sphere packing technique is used to derive our main results. The Wald sequential t-test lemma and the Gaussian-Chebyshev quadrature are the main tools to obtain the closed-form expression for the lower bound. Numerical results are provided to validate our results and demonstrate the tightness of our results compared to the Polyanskiy-Poor-Verdu (PPV) bound.

cs.IT↗

arXiv2023

A Novel Exploitative and Explorative GWO-SVM Algorithm for Smart Emotion Recognition

Emotion recognition or detection is broadly utilized in patient-doctor interactions for diseases such as schizophrenia and autism and the most typical techniques are speech detection and facial recognition. However, features extracted from these behavior-based emotion recognitions are not reliable since humans can disguise their emotions. Recording voices or tracking facial expressions for a long term is also not efficient. Therefore, our aim is to find a reliable and efficient emotion recognition scheme, which can be used for non-behavior-based emotion recognition in real-time. This can be solved by implementing a single-channel electrocardiogram (ECG) based emotion recognition scheme in a lightweight embedded system. However, existing schemes have relatively low accuracy. Therefore, we propose a reliable and efficient emotion recognition scheme - exploitative and explorative grey wolf optimizer based SVM (X - GWO - SVM) for ECG-based emotion recognition. Two datasets, one raw self-collected iRealcare dataset, and the widely-used benchmark WESAD dataset are used in the X - GWO - SVM algorithm for emotion recognition. This work demonstrates that the X - GWO - SVM algorithm can be used for emotion recognition and the algorithm exhibits superior performance in reliability compared to the use of other supervised machine learning methods in earlier works. It can be implemented in a lightweight embedded system, which is much more efficient than existing solutions based on deep neural networks.

eess.SP↗

arXiv2022

Quantum Sensing Based Joint 3D Beam Training for UAV-mounted STAR-RIS Aided TeraHertz Multi-user Massive MIMO Systems

Terahertz (THz) systems are capable of supporting ultra-high data rates thanks to large bandwidth, and the potential to harness high-gain beamforming to combat high pathloss. In this paper, a novel quantum sensing (Ghost Imaging (GI)) based beam training is proposed for Simultaneously Transmitting and Reflecting Reconfigurable Intelligent Surface (STAR RIS) aided THz multi-user massive MIMO systems. We first conduct GI by surrounding 5G downlink signals to obtain 3D images of the environment including users and obstacles. Based on the information, we calculate the optimal position of the UAV-mounted STAR by the proposed algorithm. Thus the position-based beam training can be performed. To enhance the beam-forming gain, we further combine with channel estimation and propose a semi-passive structure of the STAR and ambiguity elimination scheme for separated channel estimation. Thus the ambiguity in cascaded channel estimation, which may affect optimal passive beamforming, is avoided. The optimal active and passive beamforming are then carried out and data transmission is initiated. The proposed BS sub-array and sub-STAR spatial multiplexing architecture, optimal active and passive beamforming, digital precoding, and optimal position of the UAV- mounted STAR are investigated jointly to maximize the average achievable sum rate of the users. Moreover, the cloud radio access networks (CRAN) structured 5G downlink signal is proposed for GI with enhanced resolution. The simulation results show that the proposed scheme achieves beam training and separated channel estimation efficiently, and increases the spectral efficiency dramatically compared to the case when the STAR operates with random phase.

cs.IT↗

arXiv2022

Energy Efficiency Optimization of Intelligent Reflective Surface-assisted Terahertz-RSMA System

This paper examines the energy efficiency optimization problem of intelligent reflective surface (IRS)-assisted multi-user rate division multiple access (RSMA) downlink systems under terahertz propagation. The objective function for energy efficiency is optimized using the salp swarm algorithm (SSA) and compared with the successive convex approximation (SCA) technique. SCA technique requires multiple iterations to solve non-convex resource allocation problems, whereas SSA can consume less time to improve energy efficiency effectively. The simulation results show that SSA is better than SCA in improving system energy efficiency, and the time required is significantly reduced, thus optimizing the system's overall performance.

eess.SP↗

arXiv2022

Micro-Vibration Modes Reconstruction Based on Micro-Doppler Coincidence Imaging

Micro-vibration, a ubiquitous nature phenomenon, can be seen as a characteristic feature on the objects, these vibrations always have tiny amplitudes which are much less than the wavelengths of the sensing systems, thus these motions information can only be reflected in the phase item of echo. Normally the conventional radar system can detect these micro vibrations through the time frequency analyzing, but these vibration characteristics can only be reflected by time-frequency spectrum, the spatial distribution of these micro vibrations can not be reconstructed precisely. Ghost imaging (GI), a novel imaging method also known as Coincidence Imaging that originated in the quantum and optical fields, can reconstruct unknown images using computational methods. To reconstruct the spatial distribution of micro vibrations, this paper proposes a new method based on a coincidence imaging system. A detailed model of target micro-vibration is created first, taking into account two categories: discrete and continuous targets. We use the first-order field correlation feature to obtain objective different micro vibration distribution based on the complex target models and time-frequency analysis in this work.

eess.SP↗

arXiv2022

Performance Analysis for Reconfigurable Intelligent Surface Assisted MIMO Systems

This paper investigates the maximal achievable rate for a given average error probability and blocklength for the reconfigurable intelligent surface (RIS) assisted multiple-input and multiple-output (MIMO) system. The result consists of a finite blocklength channel coding achievability bound and a converse bound based on the Berry-Esseen theorem, the Mellin transform and the mutual information. Numerical evaluation shows fast speed of convergence to the maximal achievable rate as the blocklength increases and also proves that the channel variance is a sound measurement of the backoff from the maximal achievable rate due to finite blocklength.

cs.IT↗

arXiv2022

Feature Extraction, Modulation and Recognition of Mixed Signal Based on SVM

This paper introduces likelihood-based and feature-based modulation recognition methods. In the feature-based modulation simulation part, instantaneous feature, cyclic spectrum, high-order cumulants, and wavelet transform features are used as the entry point, and six digital signals including 2ASK, 4ASK, BPSK, QPSK, 2FSK and 4FSK are simulated, showing the difference of signals in multiple dimensions

eess.SP↗

arXiv2022

Smart Mat Used for Prevention of Hospital-Acquired Pressure Injuries

This work develops a smart mat for monitoring body positions. We use Velostat as a force sensor resistance (FSR) to construct a sensor matrix over the mat to receive the pressure distribution of the patient's body, and then upload the processed distribution information to the PC for data visualization through Arduino. Data visualization on the PC side is compiled through Python language to realize the functions of patient body pressure distribution monitoring, long-term pressure alarm and posture prediction. The purpose of this work is to relieve the work stress on medical staff caused by pressure injuries during the treatment and care of patients during the pandemic. This paper includes the literature review on similar previous works and combines the test results to design the structure and circuit of the smart mat.

eess.SP↗

arXiv2022

A Dynamic Subarray Structure in Reconfigurable Intelligent Surfaces for TeraHertz Communication Systems

Reconfigurable Intelligent Surface (RIS) has become a popular technology to improve the capability of a THz multiuser Multi-input multi-output (MIMO) communication system. THz wave characteristics, on the other hand, restrict THz beam coverage on RIS when using a uniform planar array (UPA) antenna. In this study, we propose a dynamic RIS subarray structure to improve the performance of a THz MIMO communication system. In more details, an RIS is divided into several RIS subarrays according to the number of users. Each RIS subarray is paired with a user and only reflects beams to the corresponding user. Based on the structure of RIS, we first propose a weighted minimum mean square error - RIS local search (WMMSE-LS) scheme, which requires that each RIS element has limited phase shifts. To improve the joint beamforming performance, we further develop an adaptive Block Coordinate Descent(BCD)-aided algorithm, an iterative optimization method. Numerical results demonstrate the effectiveness of the dynamic RIS subarray structure and the adaptive BCD-aided joint beamforming scheme and also show the merit of our proposed system.

eess.SP↗

arXiv2022

Design of an embedded system with on-demand image capturing and transmission for remote agricultural monitoring

The ability to visually verify some element of a remotely controlled agricultural automation system through a photograph is valuable in many cases, not only in the operational phase of the system, but especially in the design and implementation phases. Owing to the remote location of many of the application sites, cellular technology is one enabling medium through which wireless transmission of the photographs could be realized. As data usage is a concern for systems using cellular technology, MQTT chosen over other protocols due to its lower message-to-header overhead. This paper outlines the hardware and firmware design of the LTE Cat-M1 enabled embedded system and the backend web development of the cloud-based web application to facilitate the receiving of the photograph. A satisfactory degree of implementation success was achieved in this project, with deployment to a production environment possible after further refinements.

eess.SP↗

arXiv2022

Modulation and Classification of Mixed Signals Based on Deep Learning

With the rapid development of information nowadays, spectrum resources are becoming more and more scarce, leading to a shift in the research direction from the modulation classification of a single signal to the modulation classification of multiple signals on the same channel. Therefore, the emergence of an effective mixed signals automatic modulation classification technology have important significance. Considering that NOMA technology has deeper requirements for the modulation classification of mixed signals under different power, this paper mainly introduces and uses a variety of deep learning networks to classify such mixed signals. First, the modulation classification of a single signal based on the existing CNN model is reproduced. We then develop new methods to improve the basic CNN structure and apply it to the modulation classification of mixed signals. Meanwhile, the effects of the number of training sets, the type of training sets and the training methods on the recognition accuracy of mixed signals are studied. Second, we investigate some deep learning models based on CNN (ResNet34, hierarchical structure) and other deep learning models (LSTM, CLDNN). It can be seen although the time and space complexity of these algorithms have increased, different deep learning models have different effects on the modulation classification problem of mixed signals at different power. Generally speaking, higher accuracy gains can be achieved.

eess.SP↗

arXiv2022

AI Based Digital Twin Model for Cattle Caring

In this paper, we developed innovative digital twins of cattle status that are powered by artificial intelligence (AI). The work was built on a farm IoT system that remotely monitors and tracks the state of cattle. A digital twin model of cattle health based on Deep Learning (DL) was generated using the sensor data acquired from the farm IoT system. The health and physiological cycle of cattle can be monitored in real time, and the state of the next physiological cycle of cattle can be anticipated using this model. The basis of this work is the vast amount of data which is required to validate the legitimacy of the digital twins model. In terms of behavioural state, it was found that the cattle treated with a combination of topical anaesthetic and meloxicam exhibits the least pain reaction. The digital twins model developed in this work can be used to monitor the health of cattle

cs.AI↗