Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 1111.0004

Modelling of the "Pi of the Sky" detector

Lech Wiktor Piotrowski
View original source ↗Read source document ↗Export metadata ↓

Abstract

The ultimate goal of the "Pi of the Sky" apparatus is observation of optical flashes of astronomical origin and other light sources variable on short timescales. We search mainly for optical emission of Gamma Ray Bursts, but also for variable stars, novae, etc. This task requires an accurate measurement of the brightness, which is difficult as "Pi of the Sky" single camera has a field of view of about 20*20 deg. This causes a significant deformation of a point spread function (PSF), reducing quality of measurements with standard algorithms. Improvement requires a careful study and modelling of PSF, which is the main topic of the presented thesis. A dedicated laboratory setup has been created for obtaining isolated, high quality profiles, which in turn were used as the input for mathematical models. Two different models are shown: diffractive, simulating light propagation through lenses and effective, modelling the PSF shape in the image plane. The effective model, based on PSF parametrization with selected Zernike polynomials describes the data well and was used in photometry and astrometry analysis. No improvement compared to standard algorithms was observed in photometry, however more than factor of 2 improvement in astrometry accuracy was reached for bright stars. Additionally, the model was used to recalculate limits on the optical precursor to GRB080319B - a limit higher by 0.75 mag compared to previous calculations has been obtained. The PSF model was also used to develop a dedicated tool to generate Monte Carlo samples of images corresponding to the "Pi of the Sky" observations. The simulator allows for a detailed reproduction of the frame as seen by our cameras. A comparison of photometry performed on real and simulated data resulted in very similar results, proving the simulator a worthy tool for future "Pi of the Sky" hardware and software development.

Explore related subjects

astro-ph.IMastro-ph.COastro-ph.HEphysics.ins-det

Keep this discovery

BibTeXRIS

Lech Wiktor Piotrowski. 2011-10-31. Modelling of the "Pi of the Sky" detector. https://arxiv.org/abs/1111.0004

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

The EDD Radio Astronomy Backend Framework

Modern digital radio astronomy receivers produce increasingly wide-bandwidth, high bit-rate data streams that necessitate the development of flexible, scalable, and maintainable backend processing and recording systems. Historically, such backend instrumentation has been tightly coupled to telescope observing modes, limiting reuse between observatories and science cases. We present the Effelsberg Direct Digitisation (EDD) backend framework, a software-defined architecture for constructing real-time radio astronomy backends on commodity off-the-shelf computing infrastructure. We describe its design, implementation, supported observing modes, and operational deployments. EDD separates a common core framework from plugin-provided observing capabilities. The core provides orchestration, telescope interfaces, pipeline lifecycle management, monitoring, and deployment tooling, while plugins implement processing pipelines for specific observing modes. The framework is designed to support both single-dish and interferometric instruments through site-specific configuration and plugin selection. EDD currently supports spectroscopy and spectropolarimetry, pulsar timing and searching, baseband recording, very long baseline interferometry, correlation, and beamforming. Operational deployments include the Effelsberg 100-m telescope, the SKA-MPI prototype dish, the Thai National Radio Telescope, and the ARGOS interferometric prototype array. By separating common services, observing-mode plugins, and site-specific configuration, it allows backend capabilities to be deployed across heterogeneous telescope environments and provides a community resource for broadband radio astronomy instrumentation.

astro-ph.IM↗
arXiv2026

Bayesian Superiority in On/Off analysis

We present a detailed comparison of Bayesian criteria with three non-informative priors - flat, Jeffreys, and scale-invariant - for testing a signal against an unknown background and compare them with the classical frequentist Li-Ma approach in the On/Off problem. We perform Monte Carlo simulations for various background levels and evaluate the Li-Ma and Bayesian criteria by their Type I error rates. We then simulate a nonzero signal and compare the criteria in terms of Type II error rates. We find that the Bayesian criterion with the Jeffreys prior yields lower Type I and Type II error rates than the Li-Ma criterion. In addition, we show that the Bayesian criteria are more robust than the Li-Ma criterion when the background distribution is overdispersed relative to the Poisson distribution.

astro-ph.IM↗
arXiv2026

An RFSoC-based Backend and Timing System for the Balloon-borne Very Long Baseline Interferometry Experiment

We present the design and performance characterization of the digital backend and precision-timing system for the Balloon-borne Very Long Baseline Interferometry Experiment (BVEX), a pathfinder for high-frequency stratospheric VLBI at 22 GHz. The backend uses one of the four 14-bit analog-to-digital converter inputs on an AMD-Xilinx RFSoC 4x2. Although the converters support sampling rates up to 5 GSPS, the flight configuration digitizes the 2-4 GHz intermediate frequency at 4.096 GSPS. CASPER firmware provides both a high-resolution spectrometer for pointing and receiver verification, and a VLBI acquisition chain with two-bit requantization that records at a rate of about 8.2 Gbps. The timestamped data packets are sent over 100 Gigabit Ethernet (GbE) to a 16 TB NVMe array in a storage computer that draws approximately 70-80 W. The timing chain uses a Rakon oven-controlled crystal oscillator as a timing reference while a time-interval counter measures its drift relative to a GPS reference with approximately 60 ps resolution. This is the first deployment of an RFSoC-based VLBI backend and precision-timing system on a stratospheric balloon. Ground tests validated the backend, spectrometer, and timing chain. The August 2025 CSA STRATOS flight ended before reaching the target float altitude because of a balloon failure, and as a result no science observations were obtained. For the planned 2027 reflight, we are developing a conduction-cooled data storage computer with 24 TB of NVMe capacity and a direct data path from the 100 GbE interface to the NVMe array.

astro-ph.IM↗