SearcharxivSearch

arXiv · 1912.06065

Method for precision measurement of the Range -- Energy relation for protons in pure hydrogen gas

Abstract

The available experimental information on the Range-Energy relation for protons stopped in hydrogen gas is summarized in the SRIM software package. The estimated precision of this data is several percents. Here we describe a possibility to measure this relation with 0.1$\%$ precision in the course of an electron-proton elastic scattering experiment to be performed in the 720 MeV electron beam at the Mainz Microtron (MAMI). This experiment, aimed at precision measurement of the proton charge radius, exploits a large hydrogen "active target" to detect the recoiled protons and a forward tracker to detect the scattered electrons. The angles of the scattered electrons are measured with $2\cdot10^{-4}$ absolute precision. Also, the electron beam momentum is known at MAMI with $2\cdot10^{-4}$ absolute precision. This gives a possibility to determine with 0.1$\%$ absolute precision the four-momentum transfer $Q^2$ which, in its turn, is a direct measure of the recoiled proton energy $T_{p}$: $Q^2 = 2M_{p}T_{p}$, where M$_{p}$ is the proton mass. From this point of view, this experimental setup can be considered as a source of protons with well defined energies inside an "active target", which is a specially designed hydrogen high-pressure Time Projection Chamber (TPC). The design of the TPC allows to measure with high precision the energy of the protons corresponding to some selected values of the proton range. In this way, the Range-Energy relation can be established for the proton energies from 1 MeV to 9.3 MeV with 0.1$\%$ absolute precision, the maximal energy being limited by the size of the TPC and by the hydrogen gas pressure.

Explore related subjects

Keep this discovery

BibTeXRIS

A. Vorobyev, N. Sagidova. 2019-12-12. Method for precision measurement of the Range -- Energy relation for protons in pure hydrogen gas. https://arxiv.org/abs/1912.06065

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

High-Speed Semi-FE Readout Module for ATLAS MDT at HL-LHC: Design and Production-Level Characterization

The High-Luminosity upgrade of the Large Hadron Collider (HL-LHC) introduces increased demands on the ATLAS Muon Spectrometer, particularly in terms of data throughput, timing distribution and system reliability. The Phase-II Chamber Service Module (CSM) is a key component of the upgraded Monitored Drift Tube (MDT) trigger and readout system, providing a high-speed interface between the front-end electronics and the backend systems. This paper describes the design and implementation of the Phase-II CSM, together with its validation. The results show that the CSM supports two independent optical uplinks, each operating at a line rate of 10.24 Gbps, together with clock distribution and slow control in the expected operating environment. Integration with small-diameter MDT (sMDT) chambers and tests with the prototype L0MDT trigger system are also presented. The CSM boards are now in production and will be used for installation and integration during the upcoming LHC Long Shutdown.

physics.ins-det

Spectral Discrimination of Deposited Gamma-Ray Energies in a Simulated CeBr$_3$ Scintillator

We show that wavelength measurements of individual detected optical photons may provide additional information about gamma-ray energy deposited in a CeBr$_3$ crystal when the detected-photon-count distributions overlap for nearby gamma-ray energies. Monoenergetic 662 and 629 keV gammas are used in a Geant4 simulation of a $25\times25\times20~\mathrm{mm^3}$ CeBr$_3$ crystal. Assuming a light yield of $6.0\times10^4$ photons/MeV, a wavelength-independent photon-detection efficiency of 30%, and a wavelength resolution of $\sigma_{\lambda}=40$ nm, we find that the fraction of photons reconstructed above 385 nm gives an event-level separation of $\sim$ 2 standard deviations between the 662 and 629 keV event populations selected within the same $\sim$ 1%-wide detected-photon-count interval. No timing or reconstructed interaction-position information is used. The result demonstrates, within the present simulation model, that event-dependent optical spectra can retain energy information beyond an undifferentiated photon count.

physics.ins-det

Operation of a negative ion gas time projection chamber without electronegative fill gases

The high fidelity reconstruction of particle tracks in micropatterned gaseous time projection chambers renders this technology ideal for future rare-event searches, including direction-sensitive dark matter experiments. Large drift distances are typically required for such experiments, so that the overall spatial resolution is limited by diffusion. Negative ion drift exhibits lower diffusion than electron drift and is thus an attractive option for realising a large-scale detector. The use of electronegative gases to create negative ions introduces technical challenges, most notably a reduction in gain when compared to conventional gas mixtures. In this study, we demonstrate a new method for negative ion generation via dissociative electron attachment using the conventional molecular fill gas CF$_4$. Our optical measurements of negative ion drift indicate electron attachment lengths of $<$1 mm and comparable gain to electron avalanches. The individual negative ion avalanches were also time-resolved, allowing the number of ions reaching the readout to be counted. We measure an improved energy resolution by single ion counting, relative to an integrated electron avalanche signal measured under identical gain conditions.

physics.ins-det