Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 2104.08233

Critical processing temperature for high performance protected silver thin film mirrors

David M. Fryauf·Andrew C. Phillips·Nobuhiko P. Kobayashi
View original source ↗Read source document ↗Export metadata ↓

Abstract

Silver (Ag) mirrors for astronomical telescopes consist of multiple metallic and dielectric thin films. Furthermore, the topmost surface of such Ag mirrors needs to be covered by a protection coating. While the protection coating is often deposited at room temperature and the entire mirrors are also handled at room temperature, various thin film deposition techniques offer protection coatings with improved characteristics when carried out at elevated temperatures. Thus, in this work, high-performance Ag mirrors were designed and fabricated with a new benchmark. The resulting Ag mirrors were annealed (i.e., post-fabrication annealing) at various temperatures to investigate the viability of introducing thermal processes during and/or after fabrication in improving overall optical performance and durability of protected silver mirrors. In our experiments, Ag mirror samples were deposited by electron-beam evaporation and subsequently annealed at various temperatures in the range from 60 {\deg}C to 300 {\deg}C, and then the mirror samples underwent an environmental stress test at 80 {\deg}C and 80% humidity for 10 days. While all the mirror samples annealed below 200 {\deg}C showed negligible corrosion after undergoing the stress testing, those annealed below 160 {\deg}C presented spectral reflectivity comparable to or higher than that of as-deposited reference samples. In contrast, the mirror samples annealed above 200 {\deg}C exhibited significant degradation after the stress testing. The comprehensive analysis indicated that delamination and voids caused by the growth of Ag grains during the annealing are the primary mechanisms of the degradation.

Explore related subjects

astro-ph.IMcond-mat.mtrl-sci

Keep this discovery

BibTeXRIS

David M. Fryauf, Andrew C. Phillips, Nobuhiko P. Kobayashi. 2021-04-16. Critical processing temperature for high performance protected silver thin film mirrors. https://doi.org/10.1117/1.jatis.7.3.034002

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

The EDD Radio Astronomy Backend Framework

Modern digital radio astronomy receivers produce increasingly wide-bandwidth, high bit-rate data streams that necessitate the development of flexible, scalable, and maintainable backend processing and recording systems. Historically, such backend instrumentation has been tightly coupled to telescope observing modes, limiting reuse between observatories and science cases. We present the Effelsberg Direct Digitisation (EDD) backend framework, a software-defined architecture for constructing real-time radio astronomy backends on commodity off-the-shelf computing infrastructure. We describe its design, implementation, supported observing modes, and operational deployments. EDD separates a common core framework from plugin-provided observing capabilities. The core provides orchestration, telescope interfaces, pipeline lifecycle management, monitoring, and deployment tooling, while plugins implement processing pipelines for specific observing modes. The framework is designed to support both single-dish and interferometric instruments through site-specific configuration and plugin selection. EDD currently supports spectroscopy and spectropolarimetry, pulsar timing and searching, baseband recording, very long baseline interferometry, correlation, and beamforming. Operational deployments include the Effelsberg 100-m telescope, the SKA-MPI prototype dish, the Thai National Radio Telescope, and the ARGOS interferometric prototype array. By separating common services, observing-mode plugins, and site-specific configuration, it allows backend capabilities to be deployed across heterogeneous telescope environments and provides a community resource for broadband radio astronomy instrumentation.

astro-ph.IM↗
arXiv2026

Bayesian Superiority in On/Off analysis

We present a detailed comparison of Bayesian criteria with three non-informative priors - flat, Jeffreys, and scale-invariant - for testing a signal against an unknown background and compare them with the classical frequentist Li-Ma approach in the On/Off problem. We perform Monte Carlo simulations for various background levels and evaluate the Li-Ma and Bayesian criteria by their Type I error rates. We then simulate a nonzero signal and compare the criteria in terms of Type II error rates. We find that the Bayesian criterion with the Jeffreys prior yields lower Type I and Type II error rates than the Li-Ma criterion. In addition, we show that the Bayesian criteria are more robust than the Li-Ma criterion when the background distribution is overdispersed relative to the Poisson distribution.

astro-ph.IM↗
arXiv2026

An RFSoC-based Backend and Timing System for the Balloon-borne Very Long Baseline Interferometry Experiment

We present the design and performance characterization of the digital backend and precision-timing system for the Balloon-borne Very Long Baseline Interferometry Experiment (BVEX), a pathfinder for high-frequency stratospheric VLBI at 22 GHz. The backend uses one of the four 14-bit analog-to-digital converter inputs on an AMD-Xilinx RFSoC 4x2. Although the converters support sampling rates up to 5 GSPS, the flight configuration digitizes the 2-4 GHz intermediate frequency at 4.096 GSPS. CASPER firmware provides both a high-resolution spectrometer for pointing and receiver verification, and a VLBI acquisition chain with two-bit requantization that records at a rate of about 8.2 Gbps. The timestamped data packets are sent over 100 Gigabit Ethernet (GbE) to a 16 TB NVMe array in a storage computer that draws approximately 70-80 W. The timing chain uses a Rakon oven-controlled crystal oscillator as a timing reference while a time-interval counter measures its drift relative to a GPS reference with approximately 60 ps resolution. This is the first deployment of an RFSoC-based VLBI backend and precision-timing system on a stratospheric balloon. Ground tests validated the backend, spectrometer, and timing chain. The August 2025 CSA STRATOS flight ended before reaching the target float altitude because of a balloon failure, and as a result no science observations were obtained. For the planned 2027 reflight, we are developing a conduction-cooled data storage computer with 24 TB of NVMe capacity and a direct data path from the 100 GbE interface to the NVMe array.

astro-ph.IM↗