SearcharxivSearch

arXiv · 2110.01206

Global Weather for the Astronomical Observatories

Abstract

Astronomical sites occupying observing instruments have to be selected according to many factors. Among these factors, geographic location of the site and quality of atmosphere above the site play an important role in the decision process. The following factors were chosen to create layers at their geographic locations (observatories: 1905 northern, 235 southern) from the \href{https://www.astrogis.org}{astroGIS database}: CC (cloud coverage), PWV (precipitable water vapor), AOD (atmospheric optical depth), VWV (vertical wind velocity) and HWV (horizontal wind velocity). In order to estimate astronomical importance of geographic location of the sites and quality of airmass above the sites, DEM (digital elevation model) and LAT (latitude of observatory location) layers were also included. Two periodic variations have been produced from these factors: monthly and annual averages. In addition to the variations or trends a complete statistical analysis was carried out for all factors to investigate the potential correlations between the factors: There is a clear difference between northern and southern hemispheres. Exchange of meteorological seasons between hemispheres are also compliant within factors. The geographical locations of most of the observatories found to be "not suitable": On the average, DEM is low (550 m), CC is high (70\%) and PWV is high (14 mm). There seems to be no apparent long-term variations and/or patterns in all factors. We once again confirm the common expectation of astronomy: \textit{as DEM increases astronomical conditions get better} (CC, PWV and AOD gets lower values). All the results will be made available online through astroGIS database.

Explore related subjects

Keep this discovery

BibTeXRIS

Z. Kurt, S. K. Yerli, N. Aksaker, A. Aktay, M. Bayazit, M. A. Erdoğan. 2021-10-04. Global Weather for the Astronomical Observatories. https://arxiv.org/abs/2110.01206

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

The EDD Radio Astronomy Backend Framework

Modern digital radio astronomy receivers produce increasingly wide-bandwidth, high bit-rate data streams that necessitate the development of flexible, scalable, and maintainable backend processing and recording systems. Historically, such backend instrumentation has been tightly coupled to telescope observing modes, limiting reuse between observatories and science cases. We present the Effelsberg Direct Digitisation (EDD) backend framework, a software-defined architecture for constructing real-time radio astronomy backends on commodity off-the-shelf computing infrastructure. We describe its design, implementation, supported observing modes, and operational deployments. EDD separates a common core framework from plugin-provided observing capabilities. The core provides orchestration, telescope interfaces, pipeline lifecycle management, monitoring, and deployment tooling, while plugins implement processing pipelines for specific observing modes. The framework is designed to support both single-dish and interferometric instruments through site-specific configuration and plugin selection. EDD currently supports spectroscopy and spectropolarimetry, pulsar timing and searching, baseband recording, very long baseline interferometry, correlation, and beamforming. Operational deployments include the Effelsberg 100-m telescope, the SKA-MPI prototype dish, the Thai National Radio Telescope, and the ARGOS interferometric prototype array. By separating common services, observing-mode plugins, and site-specific configuration, it allows backend capabilities to be deployed across heterogeneous telescope environments and provides a community resource for broadband radio astronomy instrumentation.

astro-ph.IM

Bayesian Superiority in On/Off analysis

We present a detailed comparison of Bayesian criteria with three non-informative priors - flat, Jeffreys, and scale-invariant - for testing a signal against an unknown background and compare them with the classical frequentist Li-Ma approach in the On/Off problem. We perform Monte Carlo simulations for various background levels and evaluate the Li-Ma and Bayesian criteria by their Type I error rates. We then simulate a nonzero signal and compare the criteria in terms of Type II error rates. We find that the Bayesian criterion with the Jeffreys prior yields lower Type I and Type II error rates than the Li-Ma criterion. In addition, we show that the Bayesian criteria are more robust than the Li-Ma criterion when the background distribution is overdispersed relative to the Poisson distribution.

astro-ph.IM

An RFSoC-based Backend and Timing System for the Balloon-borne Very Long Baseline Interferometry Experiment

We present the design and performance characterization of the digital backend and precision-timing system for the Balloon-borne Very Long Baseline Interferometry Experiment (BVEX), a pathfinder for high-frequency stratospheric VLBI at 22 GHz. The backend uses one of the four 14-bit analog-to-digital converter inputs on an AMD-Xilinx RFSoC 4x2. Although the converters support sampling rates up to 5 GSPS, the flight configuration digitizes the 2-4 GHz intermediate frequency at 4.096 GSPS. CASPER firmware provides both a high-resolution spectrometer for pointing and receiver verification, and a VLBI acquisition chain with two-bit requantization that records at a rate of about 8.2 Gbps. The timestamped data packets are sent over 100 Gigabit Ethernet (GbE) to a 16 TB NVMe array in a storage computer that draws approximately 70-80 W. The timing chain uses a Rakon oven-controlled crystal oscillator as a timing reference while a time-interval counter measures its drift relative to a GPS reference with approximately 60 ps resolution. This is the first deployment of an RFSoC-based VLBI backend and precision-timing system on a stratospheric balloon. Ground tests validated the backend, spectrometer, and timing chain. The August 2025 CSA STRATOS flight ended before reaching the target float altitude because of a balloon failure, and as a result no science observations were obtained. For the planned 2027 reflight, we are developing a conduction-cooled data storage computer with 24 TB of NVMe capacity and a direct data path from the 100 GbE interface to the NVMe array.

astro-ph.IM