Enhancing the Electron Mobility in Si-doped (010) $\beta$-Ga$_2$O$_3$ films with Low-Temperature Buffer Layers

Arkka Bhattacharyya; Carl Peterson; Takeki Itoh; Saurav Roy; Jacqueline Cooke; Steve Rebollo; Praneeth Ranga; Berardi Sensale-Rodriguez; Sriram Krishnamoorthy

arXiv · 2212.02062

Enhancing the Electron Mobility in Si-doped (010) $\beta$-Ga$_2$O$_3$ films with Low-Temperature Buffer Layers

Arkka Bhattacharyya·Carl Peterson·Takeki Itoh·Saurav Roy·Jacqueline Cooke·Steve Rebollo·Praneeth Ranga·Berardi Sensale-Rodriguez·Sriram Krishnamoorthy

View original source ↗Read source document ↗Export metadata ↓

Abstract

We demonstrate a new substrate cleaning and buffer growth scheme in $\beta$-Ga$_2$O$_3$ epitaxial thin films using metalorganic vapor phase epitaxy (MOVPE). For the channel structure, a low-temperature (LT, 600 $^\circ$C) undoped Ga$_2$O$_3$ buffer is grown followed by transition layers to a high-temperature (HT, 810 $^\circ$C) Si-doped Ga$_2$O$_3$ channel layers without growth interruption. The (010) Ga$_2$O$_3$ Fe-doped substrate cleaning uses solvent cleaning followed by an additional HF (49% in water) treatment for 30 mins before the epilayer growth. This step is shown to compensate the parasitic Si channel at the epilayer-substrate interface that originates from the substrate polishing process or contamination from the ambient. SIMS analysis shows the Si peak atomic density at the substrate interface is several times lower than the Fe atomic density in the substrate - indicating full compensation. The elimination of the parasitic electron channel at the epi-substrate interface was also verified by electrical (capacitance-voltage profiling) measurements. In the LT-grown buffer layers, it is seen that the Fe forward decay tail from the substrate is very sharp with a decay rate of $\sim$ 9 nm$/$dec. These channels show record high electron mobility in the range of 196 - 85 cm$^2$/Vs in unintentionally doped and Si-doped films in the doping range of 2$\times$10$^{16}$ to 1$\times$10$^{20}$ cm$^{-3}$. Si delta-doped channels were also grown utilizing this substrate cleaning and the hybrid LT-buffers. Record high electron Hall mobility of 110 cm$^2$/Vs was measured for sheet charge density of 9.2$\times$10$^{12}$ cm$^{-2}$. This substrate cleaning combined with the LT-buffer scheme shows the potential of designing Si-doped $\beta$-Ga$_2$O$_3$ channels with exceptional transport properties for high performance gallium oxide-based electron devices.

Explore related subjects

cond-mat.mtrl-sci physics.app-ph

Keep this discovery

BibTeX RIS

Arkka Bhattacharyya, Carl Peterson, Takeki Itoh, Saurav Roy, Jacqueline Cooke, Steve Rebollo, Praneeth Ranga, Berardi Sensale-Rodriguez, Sriram Krishnamoorthy. 2022-12-05. Enhancing the Electron Mobility in Si-doped (010) $\beta$-Ga$_2$O$_3$ films with Low-Temperature Buffer Layers. https://arxiv.org/abs/2212.02062

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Measuring chiral phonons

Chiral phonons are quantized vibrations where the atomic motion in a solid breaks improper rotation symmetries. In many cases, chiral phonons possess angular momenta and are therefore selective to circularly polarized light. Both fundamental and applied research efforts on chiral phonons have been gaining increasing attention owing to their importance in a variety of fields including spintronics, spin-selective chemical reactions, thermal transport, quantum information processing and biosensing, where the bi-directional spin-lattice coupling enabled by chiral phonons can be harnessed in new ways, and potentially lead to new functionalities. Thus far, the studies of chiral phonons across diverse materials platforms have evolved largely independently within these fields, but the experimental techniques are often interrelated. In this perspective, we present a detailed description, as well as advantages and disadvantages of the current approaches for experimentally measuring chiral phonons in chiral and achiral materials. We conclude with a discussion of new methods for measuring chiral phonons. Ultimately, this work seeks to offer an experimental guide for systematically investigating the properties of chiral phonons in various materials systems and applications.

cond-mat.mtrl-sci↗

arXiv2026

A model of grain growth in UN integrating molecular dynamics, phase-field modeling, and uncertainty quantification

Grain growth kinetics and grain-boundary (GB) properties in uranium mononitride (UN) are investigated through an integrated multiscale framework combining molecular dynamics (MD), phase-field modeling, and surrogate-assisted uncertainty quantification. MD simulations yield GB energies for 27 symmetric tilt boundaries from 0--2000~K, which are consistent with available DFT values. The average GB energy is nearly temperature-independent below 1000~K and increases at higher temperatures. A mechanistic pore-drag model applied to the only available grain growth dataset for actinide nitrides yields a mobility reduction factor of $s \approx 0.93$--$0.99$, statistically indistinguishable from unity, confirming that pore drag is negligible under the experimental conditions. The intrinsic GB mobility is therefore extracted directly from the effective mobility, yielding $M_0 = 2.05\times10^{-15}$~m$^4$/(J$\cdot$s) and $Q_M = 0.89$~eV. Phase-field simulations conducted from 1500--2000~K confirm normal curvature-driven grain growth, with grain size distributions converging to the Hillert-like form. A surrogate-assisted global sensitivity analysis---combining principal component analysis, Gaussian process regression, and Sobol decomposition---reveals that the mobility prefactor $M_0$ dominates output variance at all times, followed by the activation energy $Q_M$, while the GB energy $\gamma$ contributes minimally. These results establish the first quantitative grain growth framework for UN and identify the reduction of uncertainty in $M_0$ and $Q_M$ as the highest-priority target for future experimental efforts.

cond-mat.mtrl-sci↗

arXiv2026

Silicon Solar Cell Design for >30% Efficiency via Singlet Fission

Singlet fission (SF) materials convert high-energy photons into multiple charge carriers, providing a route to exceed the efficiency limits of single-junction silicon solar cells without many of the complexities of multi-junction tandem designs. Following the first demonstration of an SF-enhanced silicon solar cell in 2025, there is a need to understand how SF materials can be effectively integrated into high-efficiency industrial silicon devices and translated from proof of concept to a manufacturable technology. Using coupled optical and electrical simulations, we assess the efficiency potential of several industrially relevant silicon cell architectures combined with SF materials. Interdigitated back-contact (IBC) cells offer the greatest potential for improvement due to unrestricted front-surface access and can achieve efficiencies exceeding 33%. However, performance is highly sensitive to front-surface passivation quality. Appropriate silicon design, particularly controlled surface doping and fixed interfacial charge, can mitigate recombination losses and relax passivation requirements for ultra-thin exciton-transfer layers.

cond-mat.mtrl-sci↗