Optically transparent and thermally efficient 2D MoS2 heaters integrated with silicon microring resonators

Dor Oz; Nathan Suleymanov; Boris Minkovich; Vladislav Kostianovskii; Liron Gantz; Dmitry Polyushkin; Thomas Mueller; Ilya Goykhman

arXiv · 2302.09279

Optically transparent and thermally efficient 2D MoS2 heaters integrated with silicon microring resonators

Dor Oz·Nathan Suleymanov·Boris Minkovich·Vladislav Kostianovskii·Liron Gantz·Dmitry Polyushkin·Thomas Mueller·Ilya Goykhman

View original source ↗Read source document ↗Export metadata ↓

Abstract

Thermal tuning of the optical refractive index in the waveguides to control light phase accumulation is essential in photonic integrated systems and applications. In silicon photonics, microheaters are mainly realized by metal wires or highly doped silicon lines placed at a safe distance (1um) from the waveguide to avoid considerable optical loss. However, this poses a significant limitation for heating efficiency because of the excessive free-carrier loss when a heater is brought closer to the optical path. In this work, we present a new concept of using optically transparent 2D semiconductors (e.g. MoS2) for realizing highly efficient waveguide integrated heaters operating at telecom wavelengths. We demonstrate that a single-layer MoS2 heater with negligible optical absorption in the infrared can be placed in close proximity (only 30nm) to the waveguide and show the best-reported heating efficiency of 15 mW per FSR without sacrificing the optical insertion loss. The heater response time is 25us, limited by Au 1L-MoS2 Schottky contact. Both the efficiency and response time can be further significantly improved by realizing 2D MoS2 heaters with ohmic contacts. Our work shows clear advantages of employing 2D semiconductors for heaters applications and paves the way for developing novel energy-efficient, lossless 2D heaters for on-chip photonic integrated circuits.

Explore related subjects

physics.optics physics.app-ph

Keep this discovery

BibTeX RIS

Dor Oz, Nathan Suleymanov, Boris Minkovich, Vladislav Kostianovskii, Liron Gantz, Dmitry Polyushkin, Thomas Mueller, Ilya Goykhman. 2023-02-18. Optically transparent and thermally efficient 2D MoS2 heaters integrated with silicon microring resonators. https://arxiv.org/abs/2302.09279

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Two-step high-accuracy microwave frequency measurement and time-frequency analysis based on optical frequency combs

Broadband microwave frequency measurement and time-frequency analysis are crucial for applications such as electronic warfare. However, when it comes to ultra wideband signal analysis, traditional electronic methods have high analysis accuracy, but intrinsic electronic bottlenecks limit their real-time analysis. Here, we propose and experimentally demonstrate a two-step microwave frequency measurement and time-frequency analysis method based on optical frequency combs. The system first performs coarse frequency localization over the 0-40 GHz range using stimulated-Brillouin-scattering-assisted frequency-to-time mapping (FTTM) and dual-comb channelized reception. The dual-comb is then reapplied for downconverting the signal under test, followed by digital signal processing to achieve high-accuracy unambiguous frequency extraction. Experimental results show that the system achieves mean single-tone frequency measurement errors of less than 10 kHz over 0-40 GHz. We further experimentally measure multi-tone, linearly frequency-modulated, and V-shaped frequency-modulated signals, demonstrating the proposed method's capability for analyzing complex signals.

physics.optics↗

arXiv2026

A Two-Mirror Faceted Projection System for EUV Lithography

We propose an all-reflective two-mirror projection system for extreme ultraviolet (EUV) lithography operating at exposure wavelengths of $13.5$~nm (Mo/Si) and $11.2$~nm (Ru/Be), delivering a fourfold ($4\times$) demagnification of the periodic mask pattern at a numerical aperture approaching unity ($\mathrm{NA}_{\max} \approx 0.993$). In contrast to conventional EUV projection objectives that incorporate 6--10 aspheric mirrors with an overall optical throughput of less than $15\%$, the proposed design redirects each accepted discrete spatial diffraction order scattered by the mask onto the wafer via a dedicated pair of planar mirror facets. The number of reflections is strictly fixed at two for all accepted orders, retaining $50$--$60\%$ of the power leaving the mask in each accepted order. We derive a spatial geometry providing rigorous optical path length equalization across all diffraction orders, thereby removing order-dependent propagation phase shifts. Individually optimized 30-bilayer Bragg multilayer coatings are designed for each facet using the transfer matrix method combined with global evolutionary optimization algorithms. The architecture is generalized to a three-dimensional vector formulation with a two-dimensionally periodic mask. Utilizing inverse lithography technology, Fourier parameterization, and a differentiable electromagnetic modal waveguide solver, we solve the synthesis problem for binary absorber masks (La absorber on a Ru/Be/Sr multilayer mirror). We demonstrate simulated aerial images of sub-10-nm features on the wafer (isolated peaks with a full width at half maximum (FWHM) of approximately $5.4$~nm and line pairs with a critical dimension of $6$~nm) and find that the two peaks remain resolved for the tested wafer defocus values from $0$ to $5$~nm along the $z$-axis.

physics.optics↗

arXiv2026

Antimony for broadband nanophotonics across the ultraviolet, visible and infrared

Semimetal elemental antimony (Sb) nanostructures show great potential for applications where nanophotonic properties play a key role, such as phase-change optical memories, non-linear optical elements, photothermal therapy agents, photodetectors and photocatalysts. However, designing advanced Sb-based photonic devices critically requires an accurate and reliable knowledge of the optical response of bulk and nanoscale Sb. Herein, we report for the first time a fully consistent and accurately measured dielectric function for Sb nanoscale films in a wide spectral range from the ultraviolet to the far infrared (4 - 0.04 eV, i.e. ~ 0.3 - 30 $\mu$m), surpassing previous reports that explored a limited spectral range. It is found that the Sb spectral response is driven exclusively by giant interband transitions in the visible up to mid infrared (4 - 0.4 eV, i.e. ~ 0.3 - 3 $\mu$m), and that their contribution dominates over that of free carriers down to 0.12 eV (i.e. ~ 10 $\mu$m). Such spectral response enables Sb nanostructures to display spectrally selective and tunable nanophotonic resonances. First, we showcase interband plasmonic resonances in the visible-to-near infrared for Sb nanogratings. Second, we report giant refractive index dielectric resonances in the mid infrared for nanostructured Sb/dielectric/metal resonant cavities. These findings open a pathway to optimized planar Sb nanoscale designs enabling a tailored light-matter interaction, which will be useful for integrated data, telecom, medical, optoelectronic and energy conversion devices operating in a broad spectral range.

physics.optics↗