SearcharxivSearch

arXiv subjects

Ilya Goykhman

Publications and source records attributed to Ilya Goykhman.

12 recordsLinked to original sources

Deterministic exciton confinement in 2D semiconductors via local dielectric engineering for scalable quantum light sources

Single-photon emitters are essential building blocks for quantum communication and photonic quantum technologies. However, realizing scalable, on-chip SPEs on a CMOS-compatible platform remains a significant challenge. Here, we propose and theoretically demonstrate a scalable approach to exciton confinement in two-dimensional semiconductors via local dielectric engineering. By introducing a high-dielectric-constant nanopillar above or beneath the 2D material, we create a spatially varying dielectric environment that can support localized exciton states, enabling deterministic, lithography-compatible single-photon emission without relying on strain, defects, or etching of the 2D layer. Using numerical solutions to the 2D excitonic Schrodinger equation, we quantify the resulting confinement through binding energies, wavefunction profiles, and a spatial confinement parameter. These results offer a practical and scalable route for integrating 2D-based quantum emitters into photonic platforms, paving the way for next-generation quantum optoelectronic devices.

physics.optics

Photonics in Flatland: Challenges and Opportunities for Nanophotonics with 2D Semiconductors

Two-dimensional (2D) semiconductors are emerging as a versatile platform for nanophotonics, offering unprecedented tunability in optical properties through exciton resonance engineering, van der Waals heterostructuring, and external field control. These materials enable active optical modulation, single-photon emission, quantum photonics, and valleytronic functionalities, paving the way for next-generation optoelectronic and quantum photonic devices. However, key challenges remain in achieving large-area integration, maintaining excitonic coherence, and optimizing amplitude-phase modulation for efficient light manipulation. Advances in fabrication, strain engineering, and computational modelling will be crucial to overcoming these limitations. This perspective highlights recent progress in 2D semiconductor-based nanophotonics, emphasizing opportunities for scalable integration into photonics.

physics.optics

Multispectral Polarization-Insensitive Graphene/Silicon Guided Mode Resonance Active Metasurfaces

We investigate advanced CMOS-compatible Graphene/Silicon active metasurfaces based on guided-mode resonance filters. The simulated results show a high extinction ratio (>25 dB), narrow linewidth (~1.5 nm @1550 nm), quality factor of Q~1000, and polarization-insensitive operation. By taking advantage of graphene broadband absorption, we present a multispectral operation in the MIR using simple geometrical scaling rules. We further showcase that the same device architecture can be employed for thermo-optic tuning using graphene as an integrated microheater. Our work contributes to the development of advanced broadband silicon-based active metasurfaces for tunable spectral filters and laser mirrors, optical switches, modulators, and sensors.

physics.optics

Optically transparent and thermally efficient 2D MoS2 heaters integrated with silicon microring resonators

Thermal tuning of the optical refractive index in the waveguides to control light phase accumulation is essential in photonic integrated systems and applications. In silicon photonics, microheaters are mainly realized by metal wires or highly doped silicon lines placed at a safe distance (1um) from the waveguide to avoid considerable optical loss. However, this poses a significant limitation for heating efficiency because of the excessive free-carrier loss when a heater is brought closer to the optical path. In this work, we present a new concept of using optically transparent 2D semiconductors (e.g. MoS2) for realizing highly efficient waveguide integrated heaters operating at telecom wavelengths. We demonstrate that a single-layer MoS2 heater with negligible optical absorption in the infrared can be placed in close proximity (only 30nm) to the waveguide and show the best-reported heating efficiency of 15 mW per FSR without sacrificing the optical insertion loss. The heater response time is 25us, limited by Au 1L-MoS2 Schottky contact. Both the efficiency and response time can be further significantly improved by realizing 2D MoS2 heaters with ohmic contacts. Our work shows clear advantages of employing 2D semiconductors for heaters applications and paves the way for developing novel energy-efficient, lossless 2D heaters for on-chip photonic integrated circuits.

physics.optics

Ultrafast, Zero-Bias, Graphene Photodetectors with Polymeric Gate Dielectric on Passive Photonic Waveguides

We report compact, scalable, high-performance, waveguide integrated graphene-based photodetectors (GPDs) for telecom and datacom applications, not affected by dark current. To exploit the photothermoelectric (PTE) effect, our devices rely on a graphene-polymer-graphene stack with static top split gates. The polymeric dielectric, poly(vinyl alcohol) (PVA), allows us to preserve graphene quality and to generate a controllable p-n junction. Both graphene layers are fabricated using aligned single-crystal graphene arrays grown by chemical vapor deposition. The use of PVA yields a low charge inhomogeneity 8 x 10$^{10}$ $cm^{-2}$ at the charge neutrality point, and a large Seebeck coefficient 140 $μ$V K$^{-1}$, enhancing the PTE effect. Our devices are the fastest GPDs operating with zero dark current, showing a flat frequency response up to 67 GHz without roll-off. This performance is achieved on a passive, low-cost, photonic platform, and does not rely on nanoscale plasmonic structures. This, combined with scalability and ease of integration, makes our GPDs a promising building block for next-generation optical communication devices.

physics.app-ph

High-responsivity graphene photodetectors integrated on silicon microring resonators

Graphene integrated photonics provides several advantages over conventional Si photonics. Single layer graphene (SLG) enables fast, broadband, and energy-efficient electro-optic modulators, optical switches and photodetectors (GPDs), and is compatible with any optical waveguide. The last major barrier to SLG-based optical receivers lies in the low responsivity - electrical output per optical input - of GPDs compared to conventional PDs. Here we overcome this shortfall by integrating a photo-thermoelectric GPD with a Si microring resonator. Under critical coupling, we achieve $>$90% light absorption in a $\sim$6 $μ$m SLG channel along the Si waveguide. Exploiting the cavity-enhanced light-matter interaction, causing carriers in SLG to reach $\sim$400 K for an input power of $\sim$0.6 mW, we get a voltage responsivity $\sim$90 V/W, demonstrating the feasibility of our approach. Our device is capable of detecting data rates up to 20 Gbit/s, with a receiver sensitivity enabling it to operate at a 10$^{-9}$ bit-error rate, on par with mature semiconductor technology. The natural generation of a voltage rather than a current, removes the need for transimpedance amplification, with a reduction of the energy-per-bit cost and foot-print, when compared to a traditional semiconductor-based receiver.

physics.app-ph

Niobium diselenide superconducting photodetectors

We report the photoresponse of niobium diselenide (NbSe$_2$), a transition metal dichalcogenide (TMD) which exhibits superconducting properties down to a single layer. Devices are built by using micro-mechanically cleaved 2 to 10 layers and tested under current bias using nano-optical mapping in the 350mK-5K range, where they are found to be superconducting. The superconducting state can be broken by absorption of light, resulting in a voltage signal when the devices are current biased. The response found to be energy dependent making the devices useful for applications requiring energy resolution, such as bolometry, spectroscopy and infrared imaging.

cond-mat.supr-con

Excitonic emission of monolayer semiconductors near-field coupled to high-Q microresonators

We present quantum yield measurements of single layer $\textrm{WSe}_2$ (1L-$\textrm{WSe}_2$) integrated with high-Q ($Q>10^6$) optical microdisk cavities, using an efficient ($η>$90%) near-field coupling scheme based on a tapered optical fiber. Coupling of the excitonic emission is achieved by placing 1L-WSe$_2$ to the evanescent cavity field. This preserves the microresonator high intrinsic quality factor ($Q>10^6$) below the bandgap of 1L-WSe$_2$. The nonlinear excitation power dependence of the cavity quantum yield is in agreement with an exciton-exciton annihilation model. The cavity quantum yield is $\textrm{QY}_\textrm{c}\sim10^{-3}$, consistent with operation in the \textit{broad emitter} regime (i.e. the emission lifetime of 1L-WSe$_2$ is significantly shorter than the bare cavity decay time). This scheme can serve as a precise measurement tool for the excitonic emission of layered materials into cavity modes, for both in plane and out of plane excitation.

cond-mat.mes-hall

Atomically thin quantum light emitting diodes

Transition metal dichalcogenides (TMDs) are optically active layered materials providing potential for fast optoelectronics and on-chip photonics. We demonstrate electrically driven single-photon emission from localised sites in tungsten diselenide (WSe2) and tungsten disulphide (WS2). To achieve this, we fabricate a light emitting diode structure comprising single layer graphene, thin hexagonal boron nitride and TMD mono- and bi-layers. Photon correlation measurements are used to confirm the single-photon nature of the spectrally sharp emission. These results present the TMD family as a platform for hybrid, broadband, atomically precise quantum photonics devices.

cond-mat.mes-hall

On-chip integrated, silicon-graphene plasmonic Schottky photodetector, with high responsivity and avalanche photogain

We report an on-chip integrated metal-graphene-silicon plasmonic Schottky photodetector with 85mA/W responsivity at 1.55 um and 7% internal quantum efficiency. This is one order of magnitude higher than metal-silicon Schottky photodetectors operated in the same conditions. At a reverse bias of 3V, we achieve avalanche multiplication, with 0.37A/W responsivity and avalanche photogain~2. This paves the way to graphene integrated silicon photonics.

cond-mat.mes-hall

Model for quantum efficiency of guided mode plasmonic enhanced silicon Schottky detectors

Plasmonic enhanced Schottky detectors operating on the basis of the internal photoemission process are becoming an attractive choice for detecting photons with sub bandgap energy. Yet, the quantum efficiency of these detectors appears to be low compare to the more conventional detectors which are based on interband transitions in a semiconductor. Hereby we provide a theoretical model to predict the quantum efficiency of guided mode internal photoemission photodetector with focus on the platform of silicon plasmonics. The model is supported by numerical simulations and comparison to experimental results. Finally, we discuss approaches for further enhancement of the quantum efficiency.

physics.optics

Evanescent light-matter Interactions in Atomic Cladding Wave Guides

Alkali vapors, and in particular rubidium, are being used extensively in several important fields of research such as slow and stored light non-linear optics3 and quantum computation. Additionally, the technology of alkali vapors plays a major role in realizing myriad industrial applications including for example atomic clocks magentometers8 and optical frequency stabilization. Lately, there is a growing effort towards miniaturizing traditional centimeter-size alkali vapor cells. Owing to the significant reduction in device dimensions, light matter interactions are greatly enhanced, enabling new functionalities due to the low power threshold needed for non-linear interactions. Here, taking advantage of the mature Complimentary Metal-Oxide-Semiconductor (CMOS) compatible platform of silicon photonics, we construct an efficient and flexible platform for tailored light vapor interactions on a chip. Specifically, we demonstrate light matter interactions in an atomic cladding wave guide (ACWG), consisting of CMOS compatible silicon nitride nano wave-guide core with a Rubidium (Rb) vapor cladding. We observe the highly efficient interaction of the electromagnetic guided mode with the thermal Rb cladding. The nature of such interactions is explained by a model which predicts the transmission spectrum of the system taking into account Doppler and transit time broadening. We show, that due to the high confinement of the optical mode (with a mode area of 0.3λ2), the Rb absorption saturates at powers in the nW regime.

physics.optics