Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 2303.07905

Off-axis Point Spread Function Reconstruction for Single Conjugate Adaptive Optics

Roland Wagner·Jenny Niebsch·Ronny Ramlau
View original source ↗Read source document ↗Export metadata ↓

Abstract

Modern Giant Segmented Mirror Telescopes (GSMTs) like the Extremely Large Telescope, which is currently under construction, depend heavily on Adaptive Optics (AO) systems to correct for atmospheric distortions. However, a residual blur always remains in the astronomical images corrected by Single Conjugate AO (SCAO) systems due to fitting and bandwidth errors, which can mathematically be described by a convolution of the true image with a point spread function (PSF). Due to the nature of the turbulent atmosphere and its correction, the PSF is spatially varying, which is known as aniosplanatic effect. The PSF serves, e.g., as a quality measure for the science images and therefore needs to be known as accurately as possible. In this paper, we present an algorithm for PSF reconstruction in directions apart from the guide star direction in an SCAO system adapted to the needs of GSMTs focused on estimating the contribution of the anisoplanatic and generalized fitting error to the PSF. In particular, the PSF reconstruction algorithm for Single Conjugate Adaptive Optics from (Wagner, 2018) is combined with an algorithm for time-dependent atmospheric tomography from (Niebsch, 2021) to obtain a direction dependent reconstruction of the post-AO PSF. Results obtained in an end-to-end simulation tool show a qualitatively good reconstruction of the PSF compared to the PSF calculated directly from the simulated incoming wavefront as well as a stable performance with respect to imprecise knowledge of atmospheric parameters.

Explore related subjects

astro-ph.IM

Keep this discovery

BibTeXRIS

Roland Wagner, Jenny Niebsch, Ronny Ramlau. 2023-03-14. Off-axis Point Spread Function Reconstruction for Single Conjugate Adaptive Optics. https://doi.org/10.1364/josaa.488843

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

The EDD Radio Astronomy Backend Framework

Modern digital radio astronomy receivers produce increasingly wide-bandwidth, high bit-rate data streams that necessitate the development of flexible, scalable, and maintainable backend processing and recording systems. Historically, such backend instrumentation has been tightly coupled to telescope observing modes, limiting reuse between observatories and science cases. We present the Effelsberg Direct Digitisation (EDD) backend framework, a software-defined architecture for constructing real-time radio astronomy backends on commodity off-the-shelf computing infrastructure. We describe its design, implementation, supported observing modes, and operational deployments. EDD separates a common core framework from plugin-provided observing capabilities. The core provides orchestration, telescope interfaces, pipeline lifecycle management, monitoring, and deployment tooling, while plugins implement processing pipelines for specific observing modes. The framework is designed to support both single-dish and interferometric instruments through site-specific configuration and plugin selection. EDD currently supports spectroscopy and spectropolarimetry, pulsar timing and searching, baseband recording, very long baseline interferometry, correlation, and beamforming. Operational deployments include the Effelsberg 100-m telescope, the SKA-MPI prototype dish, the Thai National Radio Telescope, and the ARGOS interferometric prototype array. By separating common services, observing-mode plugins, and site-specific configuration, it allows backend capabilities to be deployed across heterogeneous telescope environments and provides a community resource for broadband radio astronomy instrumentation.

astro-ph.IM↗
arXiv2026

Bayesian Superiority in On/Off analysis

We present a detailed comparison of Bayesian criteria with three non-informative priors - flat, Jeffreys, and scale-invariant - for testing a signal against an unknown background and compare them with the classical frequentist Li-Ma approach in the On/Off problem. We perform Monte Carlo simulations for various background levels and evaluate the Li-Ma and Bayesian criteria by their Type I error rates. We then simulate a nonzero signal and compare the criteria in terms of Type II error rates. We find that the Bayesian criterion with the Jeffreys prior yields lower Type I and Type II error rates than the Li-Ma criterion. In addition, we show that the Bayesian criteria are more robust than the Li-Ma criterion when the background distribution is overdispersed relative to the Poisson distribution.

astro-ph.IM↗
arXiv2026

An RFSoC-based Backend and Timing System for the Balloon-borne Very Long Baseline Interferometry Experiment

We present the design and performance characterization of the digital backend and precision-timing system for the Balloon-borne Very Long Baseline Interferometry Experiment (BVEX), a pathfinder for high-frequency stratospheric VLBI at 22 GHz. The backend uses one of the four 14-bit analog-to-digital converter inputs on an AMD-Xilinx RFSoC 4x2. Although the converters support sampling rates up to 5 GSPS, the flight configuration digitizes the 2-4 GHz intermediate frequency at 4.096 GSPS. CASPER firmware provides both a high-resolution spectrometer for pointing and receiver verification, and a VLBI acquisition chain with two-bit requantization that records at a rate of about 8.2 Gbps. The timestamped data packets are sent over 100 Gigabit Ethernet (GbE) to a 16 TB NVMe array in a storage computer that draws approximately 70-80 W. The timing chain uses a Rakon oven-controlled crystal oscillator as a timing reference while a time-interval counter measures its drift relative to a GPS reference with approximately 60 ps resolution. This is the first deployment of an RFSoC-based VLBI backend and precision-timing system on a stratospheric balloon. Ground tests validated the backend, spectrometer, and timing chain. The August 2025 CSA STRATOS flight ended before reaching the target float altitude because of a balloon failure, and as a result no science observations were obtained. For the planned 2027 reflight, we are developing a conduction-cooled data storage computer with 24 TB of NVMe capacity and a direct data path from the 100 GbE interface to the NVMe array.

astro-ph.IM↗